Cl_alv_table_create= create_dynamic_table error
Hi Gurus,
Method cl_alv_table_create=>create_dynamic_table
is giving dump.When i am trying to create internal table from fieldcatalog values.Program" "not found.
Please suggest some solution.
Good answers will be rewarded with points.
Thanks,
Twinkle
Check this program as reference .
report zrich_0002.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
type-pools : abap.
data : it_details type abap_compdescr_tab,
wa_details type abap_compdescr.
data : ref_descr type ref to cl_abap_structdescr.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
selection-screen begin of block b1 with frame title text .
parameters: p_table(30) type c.
selection-screen end of block b1.
* Get the structure of the table.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
loop at it_details into wa_details.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = wa_details-name .
wa_it_fldcat-datatype = wa_details-type_kind.
wa_it_fldcat-inttype = wa_details-type_kind.
wa_it_fldcat-intlen = wa_details-length.
wa_it_fldcat-decimals = wa_details-decimals.
append wa_it_fldcat to it_fldcat .
endloop.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
* Select Data from table.
select * into corresponding fields of table <dyn_table>
from (p_table).
* Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
assign component sy-index of structure <dyn_wa> to <dyn_field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <dyn_field>.
else.
write: <dyn_field>.
endif.
enddo.
endloop.
Regards,
Rich Heilman
Similar Messages
-
Dear Expers
I created a ABAP with dynamic internal table using cl_alv_table_create=>create_dynamic_table more or less according to this example here:
cl_alv_table_create=>create_dynamic_table error
Now I need a second dynamic internal table in the same program. So in a first try I just process the same code a second time (copy+paste) with new variables and new fieldsymbols. But when the program runs and the method is called a second time there is this error: "LT_GENTAB-xyz has laready been declared 7 xyz".
I believe I must free/initialize/delete/undeclare LT_GENTAB before calling the method a second time. Can anybody tell me how to do that? Or is there any other advice on how to create 2 internal tables dynamically in the same program (if possible using the same approach)?
Many thanksHi,
Here is the sample code from the link in your message :
Filling a table for field declarations :
loop at it_details into wa_details.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = wa_details-name .
wa_it_fldcat-datatype = wa_details-type_kind.
wa_it_fldcat-inttype = wa_details-type_kind.
wa_it_fldcat-intlen = wa_details-length.
wa_it_fldcat-decimals = wa_details-decimals.
append wa_it_fldcat to it_fldcat .
endloop.
Call the method for dynamic creation :
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table
I meant you didn't refresh table it_fldcat as you fields declaration table.
Did u refresh this table before your second copy code? -
Cl_alv_table_create= create_dynamic_table is dumping
Dear Xperts,
cl_alv_table_create=>create_dynamic_table is dumping with message "LOAD_PROGRAM_NOT_FOUND"
Pls Help:
Thanks
RajMy Code:
DATA: T_DATA TYPE REF TO DATA,
T_FIELDCAT TYPE LVC_T_FCAT,
T_HEADER TYPE SLIS_T_LISTHEADER,
T_SORT TYPE SLIS_T_SORTINFO_ALV.
Field Symbols
FIELD-SYMBOLS : <FS_DATA> TYPE STANDARD TABLE," REF TO DATA,
<FS_BATCH> TYPE STANDARD TABLE,
<FS_FREE> TYPE STANDARD TABLE,
<FS_STOR> TYPE STANDARD TABLE,
<FS_WA_FREE>,
<FS_WA_STOR>,
<FS_WA_BATCH>,
<FS_VAR>,
<FS_VAL> TYPE KONP-KBETR .
To create the dynamic Internal Table.
The fields of this table are obtained at runtime
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FIELDCAT
IMPORTING
EP_TABLE = T_DATA
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE E074 WITH TEXT-015. " Error Creating int table.
EXIT.
ENDIF.
ASSIGN T_DATA->* TO <FS_BATCH>. -
Cl_alv_table_create= create_dynamic_table
Hi,
When I use this method it is dumping
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = <new_table>.
The error What I am getting is "LOAD_PROGRAM_NOT_FOUND" "CX_SY_PROGRAM_NOT_FOUND" MESSAGE IS ' Program " " Not Found '.
Please help us in this issue
Thanks & Regards,
Sivaram KandulaDear Rich,
I am facing very similar problem to the solution you gave here, but I couldn't get through with this, Hope you can certainly help me and I am pasting my code here: pls look into it.
Awards will be rewarded for sure...
Material Field properties are set here
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT = TEXT-018.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-INTLEN = 18.
WA_FIELDCAT-OUTPUTLEN = 18.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
Material Desc properties are set here
WA_FIELDCAT-FIELDNAME = 'MAKTX'.
WA_FIELDCAT-SELTEXT = TEXT-019.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-INTLEN = 35.
WA_FIELDCAT-OUTPUTLEN = 35.
WA_FIELDCAT-JUST = 'X'.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
*added by sarath Dt:03.08.06,Ticket#483.
IF P_BATCH = 'X' OR P_FREEST = 'X'.
WA_FIELDCAT-FIELDNAME = 'CAT_DESC'.
WA_FIELDCAT-SELTEXT = TEXT-041.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-INTLEN = 35.
WA_FIELDCAT-OUTPUTLEN = 35.
WA_FIELDCAT-JUST = 'X'.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDIF.
*end of additoin by sarath Dt:03.08.06,Ticket#483.
Plant properties are set here
WA_FIELDCAT-FIELDNAME = 'WERKS'.
WA_FIELDCAT-SELTEXT = TEXT-020.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-INTLEN = 4.
WA_FIELDCAT-OUTPUTLEN = 4.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
Plant properties are set here
*added by sarath Dt:03.08.06,Ticket#483.
IF P_BATCH = 'X' OR P_FREEST = 'X'.
WA_FIELDCAT-FIELDNAME = 'SPART'.
WA_FIELDCAT-SELTEXT = TEXT-042.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-INTLEN = 35.
WA_FIELDCAT-OUTPUTLEN = 35.
WA_FIELDCAT-JUST = 'X'.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDIF.
*end of additoin by sarath Dt:03.08.06,Ticket#483.
WA_FIELDCAT-FIELDNAME = 'MVGR1'.
WA_FIELDCAT-SELTEXT = TEXT-026.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-INTLEN = 9.
WA_FIELDCAT-OUTPUTLEN = 9.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
Storage Location properties are set here
IF P_STOR = 'X'.
WA_FIELDCAT-FIELDNAME = 'LGORT'.
WA_FIELDCAT-SELTEXT = TEXT-021.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-INTLEN = 4.
WA_FIELDCAT-OUTPUTLEN = 4.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
Stock Type properties are set here
WA_FIELDCAT-FIELDNAME = 'STOCKTYP'.
WA_FIELDCAT-SELTEXT = TEXT-022.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-INTLEN = 15.
WA_FIELDCAT-OUTPUTLEN = 15.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDIF.
added by gopal for ticket#536
This is for sorting the numeric fields only
DATA: IDX TYPE SY-TABIX,
D_IND TYPE SY-TABIX.
LOOP AT T_SIZES INTO T1 WHERE SIZE CO TEXT-043.
IDX = SY-TABIX.
IF T1-SIZE < 10.
CONCATENATE '0' T1-SIZE INTO T1-SIZE.
ELSEIF T1-SIZE = '9.5'.
CONCATENATE '0' T1-SIZE INTO T1-SIZE.
ENDIF.
APPEND T1.
CLEAR T1.
DELETE T_SIZES INDEX IDX .
CLEAR : IDX.
ENDLOOP.
CLEAR : IDX.
LOOP AT T_SIZES INTO T2 WHERE SIZE CO TEXT-044.
IDX = SY-TABIX.
APPEND T2.
CLEAR T2.
DELETE T_SIZES INDEX IDX .
CLEAR : IDX.
ENDLOOP.
SORT T2 BY SIZE .
APPEND LINES OF T2[] TO T1[].
SORT T1 BY SIZE .
IF T_SIZES[] IS INITIAL.
T_SIZES[] = T1[].
ELSE.
APPEND LINES OF T_SIZES[] TO T1[].
DESCRIBE TABLE T1[].
D_IND = SY-TABIX.
DELETE T_SIZES[] FROM 1 TO D_IND.
T_SIZES[] = T1[].
ENDIF.
**end of addition by gopal for ticket#536
LOOP AT T_SIZES INTO WA_SIZES.
IF WA_SIZES-SIZE CA '.'.
DEIK905030 for Ticket#691 by harsha on 31052007
REPLACE '.' WITH '_' INTO WA_SIZES-SIZE .
**End of changes for DEIK905030.
ENDIF.
Sizes of the material field properties are set here
WA_FIELDCAT-FIELDNAME = WA_SIZES-SIZE.
WA_FIELDCAT-SELTEXT = WA_SIZES-SIZE.
WA_FIELDCAT-INTTYPE = 'I'.
WA_FIELDCAT-INTLEN = 11.
WA_FIELDCAT-DO_SUM = 'X'.
WA_FIELDCAT-OUTPUTLEN = 11.
WA_FIELDCAT-NO_ZERO = 'X'.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDLOOP.
Total Field properties are set here
WA_FIELDCAT-FIELDNAME = 'TOTAL'.
WA_FIELDCAT-SELTEXT = TEXT-023.
WA_FIELDCAT-INTTYPE = 'I'.
WA_FIELDCAT-INTLEN = 13.
WA_FIELDCAT-OUTPUTLEN = 13.
WA_FIELDCAT-DO_SUM = 'X'.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
maximum Retail Price field properties are set here
WA_FIELDCAT-FIELDNAME = 'MRPRT'.
WA_FIELDCAT-SELTEXT = TEXT-028.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-DECIMALS = 2.
WA_FIELDCAT-INTLEN = 13.
WA_FIELDCAT-OUTPUTLEN = 13.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
maximum Retail Price field properties are set here
WA_FIELDCAT-FIELDNAME = 'MRP'.
WA_FIELDCAT-SELTEXT = TEXT-024.
WA_FIELDCAT-DO_SUM = 'X'.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-DECIMALS = 2.
WA_FIELDCAT-INTLEN = 13.
WA_FIELDCAT-OUTPUTLEN = 13.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
Moving Average Value properties are set here
WA_FIELDCAT-FIELDNAME = 'MAV'.
WA_FIELDCAT-SELTEXT = TEXT-025.
WA_FIELDCAT-DO_SUM = 'X'.
WA_FIELDCAT-INTTYPE = 'C'.
WA_FIELDCAT-DECIMALS = 2.
WA_FIELDCAT-INTLEN = 13.
WA_FIELDCAT-OUTPUTLEN = 13.
APPEND WA_FIELDCAT TO T_FIELDCAT.
CLEAR WA_FIELDCAT.
To create the dynamic Internal Table.
The fields of this table are obtained at runtime
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FIELDCAT
IMPORTING
EP_TABLE = T_DATA
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE E074 WITH TEXT-015. " Error Creating int table.
EXIT.
ENDIF.
ASSIGN T_DATA->* TO <FS_BATCH>.
CREATE DATA WA_NEWTAB LIKE LINE OF <FS_BATCH>. -
Create_dynamic_table - error "Load program not found"
Hi experts,
i have receive error "Load program not found" at CALL METHOD cl_alv_table_create=>create_dynamic_table
Runtime Error LOAD_PROGRAM_NOT_FOUND
Exception CX_SY_PROGRAM_NOT_FOUND
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FB_TABLE_CREATE_STRING" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
I'm stuck in this annoying problem,,,can anyone help me?Hi Maroz,
I know this is not best practise to post my question in some others, but i have posted it separately earlier
Dynamic ITAB from Excel
I have created a dynamic ITAB from 1 Row of Excel Sheet
LOOP AT ist_excel INTO w_excel WHERE row = 2. " Contains the Values provided in 2nd row of Excel
APPEND w_excel TO row1.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 3. " Contains the Values provided in 3rd row of Excel
APPEND w_excel TO row2.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 4." Contains the Values provided in 4th row of Excel Etc
APPEND w_excel TO row3.
ENDLOOP.
LOOP AT row1 INTO w_excel.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = w_excel-value .
wa_it_fldcat-datatype = 'C'.
wa_it_fldcat-inttype = wa_details-type_kind.
wa_it_fldcat-intlen = 40.
* wa_it_fldcat-decimals = wa_details-decimals.
APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
I followed the Link provided by to create a Dynamic ITAB
Please guide me how to pass these Value from excel to Dynamic Internal Table
Warm Regards
Ramchander -
Field names for cl_alv_table_create= create_dynamic_table
Morning All
My client is currently implementing SAP QM at one of the labs and I have come across a situation where the fieldnames required for a dynamic table creation can potentially contain spaces and special characters. So far I have urged them to remove all such characters as the call to the cl_alv_table_create=>create_dynamic_table method will dump if they are present.
My question therefore is, is there a definitive list of characters that cannot be used as part of a fieldname? I intend to use such a list to then search and replace the special characters to enable me to match fieldnames.
For those of you that know QM, we cannot use internally assigned numbers for master characteristics (client decision) and special characters are frequently used as names in the lab. My client sees it as a limitation to remove the spaces and special characters from the names but unfortunately it causes problems for me if they don't.
I need to match the names to determine results for a report so substition seems to be the way forward - unless some else has another suggestion?
Thanks in advance
IanThere is a form called SAACHECK in module pool RDDU0001 that the data dictionary program uses to check the validity of field names. You should probably have a look at the logic.
But why use the Master characteristics as the field name anyway? Why not instead create a cross reference in an internal table and generate a simple sequence for each unique master characteristic. That way your field names are just the sequence number, but you can still match up your data with a binary read on the cross reference internal table. -
Table Type in cl_alv_table_create= create_dynamic_table
Hi guys,
The method create_dynamic_table from cl_alv_table_create has as exporting parameter a fielcatalog table. I want to insert a table type in this table, basically the field INTTYPE from LVC_S_FCAT can do that if u put the value 'h' in it. But I notice, that in method implementations all the cases are considered:
C
Character String
N
Character String with Digits Only
D
Date (Date: YYYYMMDD)
T
Time (Time: HHMMSS)
X
Byte Sequence (heXadecimal)
I
Integer number (4-byte integer with sign)
b
1-byte integer, integer number <= 254
s
2-byte integer, only for length field before LCHR or LRAW
P
Packed number
F
Floating point number to accuracy of 8 bytes
and other, but not 'h'.
Does anybody knows how create a dynamic table with a table type inside ? The table type has the structure from data dictionary lvc_t_scol.
Ionut.cl_alv_table_create=>create_dynamic_table( ) is no longer recommended to build dynamic tables.
RTTC classes are very intuitive and quite easy to maintain.
DATA:
gt_struct_fields TYPE cl_abap_structdescr=>component_table,
gwa_struct_field TYPE cl_abap_structdescr=>component.
DATA:
goref_table TYPE REF TO cl_abap_tabledescr,
gdref_table TYPE REF TO data.
FIELD-SYMBOLS <gt_dynamic> TYPE STANDARD TABLE.
TRY.
* f1 TYPE c LENGTH 10
gwa_struct_field-name = `F1`.
gwa_struct_field-type = cl_abap_elemdescr=>get_c( 10 ).
APPEND gwa_struct_field TO gt_struct_fields.
CLEAR gwa_struct_field.
* f2 TYPE bukrs
gwa_struct_field-name = `F2`.
gwa_struct_field-type ?= cl_abap_typedescr=>describe_by_name( `BUKRS` ).
APPEND gwa_struct_field TO gt_struct_fields.
CLEAR gwa_struct_field.
* f3 TYPE flighttab
gwa_struct_field-name = `F3`.
gwa_struct_field-type ?= cl_abap_typedescr=>describe_by_name( `FLIGHTTAB` ).
APPEND gwa_struct_field TO gt_struct_fields.
CLEAR gwa_struct_field.
* Use the structure object to build the table
goref_table = cl_abap_tabledescr=>get(
cl_abap_structdescr=>get( gt_struct_fields )
CREATE DATA gdref_table TYPE HANDLE goref_table.
ASSIGN gdref_table->* TO <gt_dynamic>.
CATCH ##no_handler
cx_sy_struct_creation
cx_parameter_invalid_range
cx_sy_table_creation.
ENDTRY.
BR,
Suhas -
Cl_alv_table_create= create_dynamic_table in ALV Grid
Hallo everybody
i have created a dynamic_table with cl_alv_table_create class. Now i want this dynamic_table integration in my ALV Grid. I try this, but without successfull
Can anybody help?
PROGRAM zliefervolu.
* Definition *
TABLES: likp, "Vertriebsbeleg: Lieferung: Kopfdaten
lips, "Vertriebsbeleg: Lieferung: Positionsdaten
kna1, "Kundenstamm (allgemeiner Teil)
marm. "Mengeneinheiten zum Material
FIELD-SYMBOLS: <fs_data> TYPE REF TO data,
<fs_1> TYPE ANY TABLE,
<fs_2>,
<fs_3>.
DATA: BEGIN OF i_vbeln OCCURS 1,
faktor(5) TYPE n,
END OF i_vbeln.
DATA: BEGIN OF v_lief OCCURS 1,
faktor TYPE string,
END OF v_lief.
DATA: BEGIN OF lieferschein OCCURS 1,
vbeln TYPE vbeln,
END OF lieferschein.
DATA: ok_code LIKE sy-ucomm, "Bildschirmbilder, Funktionscode, der PAI ausgelöst hat
v_volurech(10) TYPE n, "Volumenberechnung
volutot TYPE string,
v_debit TYPE kunnr,
v_lifg TYPE vrkme,
v_datumkl TYPE wadat,
v_datumgr TYPE wadat,
v_faktor(5) TYPE n,
v_faktors TYPE string,
v_datum TYPE string,
v_count TYPE i,
lt_fieldcatalog TYPE lvc_t_fcat,
ls_fieldcatalog TYPE lvc_s_fcat,
new_table TYPE REF TO data,
new_line TYPE REF TO data,
lt_data TYPE REF TO data,
v_datumlow(10) TYPE c,
v_datumhigh(10) TYPE c,
v_text TYPE string,
name_catolog TYPE lvc_t_fcat, "Ändern von Spaltenname
l_field LIKE LINE OF name_catolog, "Kurzspeicher für Spaltenname
g_container TYPE scrfname VALUE 'BCALV_GRID_CONTROL',
grid1 TYPE REF TO cl_gui_alv_grid, "ALV Grid Definition
creattable TYPE REF TO cl_alv_table_create,
g_custom_container TYPE REF TO cl_gui_custom_container.
DATA: i_tabledata TYPE TABLE OF zvolutable.
SELECT-OPTIONS: s_kunnr FOR likp-kunnr, "Lieferung
s_wadat FOR likp-wadat OBLIGATORY, "Geplantes Datum der Warenbewegung
s_vbeln FOR likp-vbeln. "Warenempfänger
* Main Program *
START-OF-SELECTION.
CLEAR: likp.
* Selektion Vertriebsbeleg: Lieferung: Kopfdaten
SELECT * FROM likp WHERE vbeln IN s_vbeln
AND wadat IN s_wadat
AND kunnr IN s_kunnr
ORDER BY vbeln.
* CLEAR: kna1.
** Selektion Kundenstamm (allgemeiner Teil)
* SELECT SINGLE * FROM kna1 WHERE kunnr EQ likp-kunnr.
* CONCATENATE likp-kunnr ` ` kna1-name1 INTO i_datatable-kunnr.
* CLEAR: lips.
* Selektion Vertriebsbeleg: Lieferung: Positionsdaten
SELECT * FROM lips WHERE vbeln EQ likp-vbeln.
CLEAR: marm.
* Selektion Mengeneinheiten zum Material
SELECT SINGLE * FROM marm WHERE matnr EQ lips-matnr
AND meinh EQ lips-vrkme.
CLEAR v_volurech.
v_volurech = lips-lfimg * marm-hoehe.
* Volumentotal
volutot = volutot + v_volurech.
MOVE lips-umvkz TO i_vbeln-faktor.
APPEND i_vbeln.
ENDSELECT.
MOVE likp-vbeln TO lieferschein-vbeln.
APPEND lieferschein.
ENDSELECT.
CLEAR: i_vbeln, lieferschein.
SORT i_vbeln BY faktor.
* Datumsfeld *
MOVE s_wadat-low TO v_datumkl.
v_datumlow = v_datumkl+6.
WRITE '.' TO v_datumlow+2.
WRITE v_datumkl+4(2) TO v_datumlow+3.
WRITE '.' TO v_datumlow+5.
WRITE v_datumkl(4) TO v_datumlow+6.
LOOP AT s_wadat WHERE high IS NOT INITIAL.
MOVE s_wadat-high TO v_datumgr.
ENDLOOP.
v_datumhigh = v_datumgr+6.
WRITE '.' TO v_datumhigh+2.
WRITE v_datumgr+4(2) TO v_datumhigh+3.
WRITE '.' TO v_datumhigh+5.
WRITE v_datumgr(4) TO v_datumhigh+6.
IF v_datumgr IS NOT INITIAL.
CONCATENATE v_datumlow '-' v_datumhigh INTO v_datum.
ELSE.
MOVE v_datumlow TO v_datum.
ENDIF.
CLEAR v_text.
v_text = 'DATUM'.
MOVE v_text TO v_lief-faktor.
APPEND v_lief.
* Faktorfelder *
CLEAR: v_count.
LOOP AT i_vbeln.
IF i_vbeln-faktor NE v_faktor.
MOVE i_vbeln-faktor TO v_faktor.
PACK i_vbeln-faktor TO v_faktors.
CONDENSE v_faktors.
MOVE v_faktors TO v_lief-faktor.
v_count = v_count + 1.
APPEND v_lief.
ENDIF.
ENDLOOP.
CLEAR v_text.
v_text = 'VOLUMEN'.
MOVE v_text TO v_lief-faktor.
APPEND v_lief.
CLEAR: v_lief.
* Erstellen von Dym. Struktur *
LOOP AT v_lief.
ls_fieldcatalog-fieldname = v_lief-faktor.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ENDLOOP.
ASSIGN lt_data TO <fs_data>.
IF v_count NE 0.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = lt_fieldcatalog
IMPORTING
ep_table = <fs_data>
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
* CALL METHOD cl_alv_table_create=>table_copy
* EXPORTING
* it_outtab = i_tabledata
* it_fieldcatalog = lt_fieldcatalog
* IMPORTING
* ep_table = <fs_data>.
IF sy-subrc <> 0.
ENDIF.
ASSIGN <fs_data>->* TO <fs_1>.
CREATE DATA new_line LIKE LINE OF <fs_1>.
ASSIGN new_line->* TO <fs_2>.
ELSE.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT_LO'
EXPORTING
titel = text-tit
textline1 = text-feh
start_column = 15 "Abstand von Links
start_row = 6. "Abstand von Oben
ENDIF.
CALL SCREEN 100.
END-OF-SELECTION.
* MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
*** Definition von Feldkatalog
* l_field-fieldname = 'DEBITOR'.
* l_field-coltext = v_datum4.
* APPEND l_field TO name_catolog.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
* ALV Methode aufruf für Ausgabe
CALL METHOD grid1->set_table_for_first_display
* EXPORTING
* i_structure_name = 'lvc_t_fcat'
CHANGING
it_outtab = <fs_1>
it_fieldcatalog = lt_fieldcatalog.
ENDIF.
ENDMODULE. "PBO OUTPUT
* MODULE PAI INPUT *
MODULE pai INPUT.
* to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
* do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
* FORM EXIT_PROGRAM *
FORM exit_program.
* CALL METHOD G_CUSTOM_CONTAINER->FREE.
* CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
thx & regards paulHi,
Herewith i am sending the sample report for the dynamic report. Kindly go through it.
REPORT YMS_DYNAMICDEMO
NO STANDARD PAGE HEADING
MESSAGE-ID zcs_c2c_001.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
clear xfc.
xfc-fieldname = xdetails-name .
xfc-datatype = xdetails-type_kind.
xfc-intlen = xdetails-length.
xfc-decimals = xdetails-decimals.
append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
Select Data from table.
select * into table <dyn_table>
from (p_table).
endform.
form write_out.
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
assign component sy-index
of structure <dyn_wa> to <dyn_field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <dyn_field>.
else.
write: <dyn_field>.
endif.
enddo.
endloop.
endform.
Thanks,
Shankar -
Hi Gurus,
I have done the following code, but it is not treating <alv_table> and <alv_table_new> as different tables.
How can I create a duplicate table of <alv_table> in the below context ??
DATA : ldtab TYPE REF TO data,
ldtab_NEW TYPE REF TO data.
FIELD-SYMBOLS: <alv_table> TYPE table,
<alv_table_NEW> TYPE table.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = gt_fcat
IMPORTING
ep_table = ldtab.
IF sy-subrc = 0.
ldtab_new = ldtab.
ASSIGN ldtab->* TO <alv_table>.
ASSIGN ldtab_new->* TO <alv_table_new>.
ENDIF.
Regards,
Sandip.hi,
Both field symbols i.e. <alv_table> and <alv_table_new> are pointing to same memory area because of the statements
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = gt_fcat
IMPORTING
ep_table = ldtab.
IF sy-subrc = 0.
ldtab_new = ldtab. <----
do not perform this step
ASSIGN ldtab->* TO <alv_table>.
ASSIGN ldtab_new->* TO <alv_table_new>.
endif.
instead write -
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = gt_fcat
IMPORTING
ep_table = ldtab.
IF sy-subrc = 0.
ASSIGN ldtab->* TO <alv_table>.
endif.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = gt_fcat
IMPORTING
ep_table = ldtab_new.
IF sy-subrc = 0.
ASSIGN ldtab_new->* TO <alv_table_new>.
endif.
try the above mentioned code.
I hope this will resolve your issue.
Regards,
Sambaran Ray -
Hi friends,
I have a problem while creating dynamic table by using
CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE.
this method is only executing for 36 times, i saw some threads which were on similar topic but none was answered fully.
i have to execute this method more times not exactly like 36 times it will not be senseful in my application if i execute it only 36 times.
Some one suggest me that i'll have to use was 6.0 but it's a limitation for me that i have to use 4.7 so pls suggest me according to keep in mind 4.7 n in my application none one isstatic all things in my application is dybanic.
how to solve this problem?
I will be thankful for your replies,
regards,hi anuj
try this example may be it wil help you.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab. *********Creates a dyanamic internal table*********
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
clear xfc.
xfc-fieldname = xdetails-name .
xfc-datatype = xdetails-type_kind.
xfc-inttype = xdetails-type_kind.
xfc-intlen = xdetails-length.
xfc-decimals = xdetails-decimals.
append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
Select Data from table.
select * into table <dyn_table>
from (p_table).
endform.
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
assign component sy-index
of structure <dyn_wa> to <dyn_field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <dyn_field>.
else.
write: <dyn_field>.
endif.
enddo.
endloop.
one more
REPORT ZCLUST1 .
Example: how to create a dynamic internal table
The dynamic internal table stucture
DATA: BEGIN OF STRUCT OCCURS 10,
FILDNAME(8) TYPE C,
ABPTYPE TYPE C,
LENGTH TYPE I,
END OF STRUCT.
The dynamic program source table
DATA: BEGIN OF INCTABL OCCURS 10,
LINE(72),
END OF INCTABL.
DATA: LNG TYPE I, TYPESRTING(6).
Sample dynamic internal table stucture
STRUCT-FILDNAME = 'field1'. STRUCT-ABPTYPE = 'c'. STRUCT-LENGTH = '6'.
APPEND STRUCT. CLEAR STRUCT.
STRUCT-FILDNAME = 'field2'. STRUCT-ABPTYPE = 'd'.
APPEND STRUCT. CLEAR STRUCT.
STRUCT-FILDNAME = 'field3'. STRUCT-ABPTYPE = 'i'.
APPEND STRUCT. CLEAR STRUCT.
Create the dynamic internal table definition in the dyn. program
INCTABL-LINE = 'program zdynpro.'. APPEND INCTABL.
INCTABL-LINE = 'data: begin of dyntab occurs 10,'. APPEND INCTABL.
LOOP AT STRUCT.
INCTABL-LINE = STRUCT-FILDNAME.
LNG = STRLEN( STRUCT-FILDNAME ).
IF NOT STRUCT-LENGTH IS INITIAL .
TYPESRTING(1) = '('.
TYPESRTING+1 = STRUCT-LENGTH.
TYPESRTING+5 = ')'.
CONDENSE TYPESRTING NO-GAPS.
INCTABL-LINE+LNG = TYPESRTING.
ENDIF.
INCTABL-LINE+15 = 'type '.
INCTABL-LINE+21 = STRUCT-ABPTYPE.
INCTABL-LINE+22 = ','.
APPEND INCTABL.
ENDLOOP.
INCTABL-LINE = 'end of dyntab. '.
APPEND INCTABL.
Create the code processes the dynamic internal table
INCTABL-LINE = ' '. APPEND INCTABL.
INCTABL-LINE = 'dyntab-field1 = ''aaaaaa''.'. APPEND INCTABL.
INCTABL-LINE = 'dyntab-field1 = ''19970814''.'. APPEND INCTABL.
INCTABL-LINE = 'dyntab-field1 = 1.'. APPEND INCTABL.
INCTABL-LINE = 'append dyntab.'. APPEND INCTABL.
INCTABL-LINE = ' '. APPEND INCTABL.
INCTABL-LINE = 'loop at dyntab.'. APPEND INCTABL.
INCTABL-LINE = 'write: / dyntab.'. APPEND INCTABL.
INCTABL-LINE = 'endloop.'. APPEND INCTABL.
Create and run the dynamic program
INSERT REPORT 'zdynpro'(001) FROM INCTABL.
SUBMIT ZDYNPRO.
or Just try out this simpler dynamic internal tables
DATA: itab TYPE STANDARD TABLE OF spfli,
wa LIKE LINE OF itab.
DATA: line(72) TYPE c,
list LIKE TABLE OF line(72).
START-OF-SELECTION.
*line = ' CITYFROM CITYTO '.
line = ' AIRPTO '.
APPEND line TO list.
SELECT DISTINCT (list)
INTO CORRESPONDING FIELDS OF TABLE itab
FROM spfli.
IF sy-subrc EQ 0.
LOOP AT itab INTO wa.
WRITE: / wa-cityfrom, wa-cityto.
WRITE :/ wa-airpto.
ENDLOOP.
ENDIF.
thanks & regards
pardeep kharb
Edited by: pardeep kumar on Jul 29, 2008 5:18 PM -
Hello experts:
I have a little problem, I want to create an ALV field with 4 decimales, it's a dinamic table, but when the alv report shows the fields it shows only 2 decimals, here the main code for explaining me better:
Here the code for create the field with decimals:
* Netpr
lv_cols = lv_cols + 1.
MOVE lv_cols TO wa_it_fldcat-col_pos.
MOVE 'NETPR' TO wa_it_fldcat-fieldname.
MOVE 'Net Price' TO wa_it_fldcat-scrtext_l.
MOVE 'Net Price' TO wa_it_fldcat-scrtext_m.
MOVE 'Net Pr' TO wa_it_fldcat-scrtext_s.
MOVE 'CURR' TO wa_it_fldcat-datatype.
MOVE 'P' TO wa_it_fldcat-inttype.
MOVE 11 TO wa_it_fldcat-intlen.
MOVE 4 TO wa_it_fldcat-decimals.
MOVE '' TO wa_it_fldcat-ref_field.
MOVE '' TO wa_it_fldcat-ref_table.
APPEND wa_it_fldcat TO t_fldcat.
After create more fields, here the code for create the dinamic ALV table:
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
* Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
After this method, the structure of the work area having the data type of the fields and all the atributes, the decimals of the NETPR fields just have 2 decimals =(
I hope my explanation it's clear.
Any help with this issue it's very welcome, thank you very much for your time.
MiriamHi
Xiaonan Hu is right: u need to delete the row where u transfer CURR as type:
* Netpr
lv_cols = lv_cols + 1.
MOVE lv_cols TO wa_it_fldcat-col_pos.
MOVE 'NETPR' TO wa_it_fldcat-fieldname.
MOVE 'Net Price' TO wa_it_fldcat-scrtext_l.
MOVE 'Net Price' TO wa_it_fldcat-scrtext_m.
MOVE 'Net Pr' TO wa_it_fldcat-scrtext_s.
*MOVE 'CURR' TO wa_it_fldcat-datatype.
MOVE 'P' TO wa_it_fldcat-inttype.
MOVE 11 TO wa_it_fldcat-intlen.
MOVE 4 TO wa_it_fldcat-decimals.
MOVE '' TO wa_it_fldcat-ref_field.
MOVE '' TO wa_it_fldcat-ref_table.
APPEND wa_it_fldcat TO t_fldcat.
If you transfer CURR, the method will defined a type p with 2 decimals by default, so it's useless to indicate the decimals in this case.
Infact the method calls the fm ALV_TABLE_CREATE, and here the abap code is:
- for CURR type:
elseif ls_fieldcat-datatype = 'CURR'.
concatenate 'DATA:'
ls_fieldcat-fieldname
'TYPE'
ls_fieldcat-inttype
'DECIMALS 2.'
into lt_source-line separated by space.
- for P type
if ls_fieldcat-inttype = 'P' and not ls_fieldcat-decimals is
initial.
replace '.' with 'DECIMALS' into lt_source-line.
concatenate lt_source-line ls_fieldcat-decimals '.' into
lt_source-line separated by space.
endif.
Max -
Issue in using CL_ALV_TABLE_CREATE= CREATE_DYNAMIC_TABLE
Hi,
I am using CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE to create dynamic internal table. I am displaying a tree in the output, based on the value selected in the tree, dynamic internal table is generated. If I continuously select the tree value for more than 36 times. This method is giving me a dump.
Kindly help me in resolving this issue.
Thanks in advance.
Regards.once you build the field catalog use the following code to create the itab. this doesnt have the limitation of 36
data: struct_type type ref to cl_abap_structdescr,
tab_type type ref to cl_abap_tabledescr ,
comp_tab type cl_abap_structdescr=>component_table,
comp like line of comp_tab,
dref type ref to data ,
dref1 type ref to data ,
op_len type i .
clear: comp , comp_tab ,is_fieldcat .
refresh comp_tab .
loop at it_fieldcat into is_fieldcat .
clear op_len .
op_len = is_fieldcat-outputlen .
comp-name = is_fieldcat-fieldname.
comp-type = cl_abap_elemdescr=>get_c( op_len ).
append comp to comp_tab.
clear : is_fieldcat , comp .
endloop .
clear struct_type .
call method cl_abap_structdescr=>create
exporting
p_components = comp_tab
p_strict = cl_abap_structdescr=>false
receiving
p_result = struct_type .
* struct_type = cl_abap_structdescr=>create( comp_tab ).
clear tab_type .
call method cl_abap_tabledescr=>create
exporting
p_line_type = struct_type
p_table_kind = cl_abap_tabledescr=>tablekind_std
* P_UNIQUE = ABAP_FALSE
* P_KEY =
* P_KEY_KIND = KEYDEFKIND_DEFAULT
receiving
p_result = tab_type .
create data dref1 type handle tab_type. -
Hi gurus i have a problem i have created a dinamic internal table but the lenght of the internal table fields is 10 i need longer fields
here is my code thanks
data: begin of it_campos OCCURS 0,
campo1(12) type c,
END OF it_campos.
do n times.
clear nocamptmp.
add 1 to incont.
CONDENSE incont NO-GAPS.
cont = incont.
CONCATENATE nocamp cont into nocamptmp.
wa_campos-campo1 = nocamptmp.
append wa_campos to it_campos.
enddo .
loop at it_campos into wa_campos.
t_fieldcat_wa-col_pos = SY-TABIX.
t_fieldcat_wa-fieldname = wa_campos-campo1.
APPEND t_fieldcat_wa TO t_fieldcat.
endloop .
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fieldcat
IMPORTING
ep_table = tabla
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
others = 2.
ASSIGN tabla->* TO <l_table>.
CREATE DATA ep_line LIKE LINE OF <l_table>.
all is fine but the fields of <l_table> are char(10) and my data is longer than 10 how can i increase the lenght of the table fields
any idea thanksModify the fieldcatalog accordingly for e.g.,
LOOP AT it_campos INTO wa_campos.
t_fieldcat_wa-col_pos = sy-tabix.
t_fieldcat_wa-fieldname = wa_campos-campo1.
t_fieldcat_wa-inttype = 'C'. " Character Type
t_fieldcat_wa-intlen = '50'. "50 character length
APPEND t_fieldcat_wa TO t_fieldcat.
ENDLOOP .
BR,
Suhas -
Call method "cl_alv_table_create= create_dynamic_table"
Hi SDN Community,
Is it possible to create dynamic tables. I tried it by call method "cl_alv_table_create=>create_dynamic_table", but the "new_table" of output parameters is empty after the call is executed.
Please suggest.
Thank You.
Pankaj.Hi Pankaj,
Try the code written below and let me know whether it works?
report z_dynamic_itab_test .
include z_table_fs_top.
include z_table_fs_forms.
initialization.
perform clear_fields.
start-of-selection.
perform fetch_data.
end-of-selection.
*& Include Z_TABLE_FS_TOP
Type Pools *
type-pools: slis,
rsds.
Tables *
tables :sscrfields, "Fields on selection screens
dd03l. "Table Fields
Types *
types: begin of t_dd03l,
tabname like dd03l-tabname, "Table Name
fieldname like dd03l-fieldname, "Field Name
keyflag like dd03l-keyflag, "Key Flag
rollname like dd03l-rollname, "Roll Name
position like dd03l-position, "Position
ddtext(30), "Description
end of t_dd03l.
types : begin of t_fname, "To hold the field names
fld like dd03l-fieldname,
end of t_fname.
Internal Tables *
data : it_dd03l type table of t_dd03l, "To hold the field names of dd03l.
it_flds type table of rsdsfields, "To hold the field names
it_fields type table of dd03l, "To hold the field names
it_cat type table of lvc_s_fcat, "To hold Field Catalog
it_fname type table of t_fname.
Work areas *
data: wa_dd03l like line of it_dd03l, "Workarea for IT_DD03L
wa_flds like line of it_flds, "Workarea for IT_FLDS
wa_fields like line of it_fields, "Workarea for IT_FIELDS
wa_cat like line of it_cat , "Workarea for IT_CAT
wa_fname like line of it_fname. "Workarea for IT_FNAME
*SELECTION SCREEN WITH BLOCK DEFINITION.
selection-screen begin of block b2 with frame title text-004.
parameters: p_tbname type dd03l-tabname.
select-options: s_field for dd03l-fieldname no intervals.
selection-screen end of block b2.
Variables *
data : lv_where type string,
lv_cnt type i value '1',
v_records type i.
data : gv_where_cl(100) type c. "Variable to hold Where clause
data: wa_flname(5) type c.
data: wa_fldcat type lvc_s_fcat.
data: it_fldcat type lvc_t_fcat.
data: it type ref to data.
DECLARATION OF FIELD SYMBOLS :
field-symbols: <fs_table> type table.
field-symbols: <fs_temp> type any,
<fs_final> type any.
*& Include Z_TABLE_FS_FORMS
*& Form clear_fields
To clear all work areas and refresh all internal tables.
form clear_fields .
clear wa_dd03l.
clear wa_flds.
clear wa_fields.
clear wa_cat.
clear wa_fname.
refresh it_dd03l.
refresh it_flds.
refresh it_fields.
refresh it_cat.
refresh it_fname.
endform. " clear_fields
*& Form FETCH_DATA
Fetch data from different tables
form fetch_data .
describe table s_field lines v_records.
Populate it_flds from s_field, to hold the fields to be Selected.
if s_field is not initial.
loop at s_field.
wa_flname = s_field-low.
write: s_field-low.
BUILD FIELD CATALOG FOR ALL FIELDS.
wa_flds-fieldname = wa_flname.
append wa_flds to it_flds.
endloop.
endif.
Populate the Where clause as a string.
if s_where[] is not initial.
loop at s_where.
concatenate lv_where s_where-low into lv_where separated by space.
endloop.
endif.
Populate it_dd03l, to hold the field names from DD03L.
select tabname
fieldname
keyflag
rollname
position
from dd03l
into table it_dd03l
where tabname eq p_tbname
and fieldname ne 'MANDT'.
if sy-subrc = 0.
sort it_dd03l by position.
delete it_dd03l where fieldname cp '.INCLU*'. ""CP = Covers Pattern
endif.
Populate it_fname, with fields which have to be selected (entered in selection).
loop at it_dd03l into wa_dd03l.
Read table it_flds.
read table it_flds into wa_flds with key fieldname = wa_dd03l-fieldname.
if sy-subrc = 0.
Move data from it_dd03l to it_fname
wa_fname-fld = wa_dd03l-fieldname.
append wa_fname to it_fname.
clear wa_fname.
endif.
endloop.
*TO CHECK IF TABLE EXISTS.
call function 'SCPR_DB_TABLE_EXIST'
exporting
tabname = p_tbname
exceptions
tab_dont_exist = 1
others = 2.
if sy-subrc <> 0.
if sy-subrc = 1.
GIVE A POP UP.
call function 'POPUP_TO_DECIDE_INFO'
exporting
textline1 = 'Table Does Not Exist !'
titel = 'Invalid Table Name'
start_column = 25
start_row = 6.
endif.
endif.
SELECT ALL RECORDS FROM DD03L.
select *
into table it_fields
from dd03l
where tabname = p_tbname.
if sy-subrc = 0.
sort it_fields by position.
delete it_fields where fieldname cp '.INCLU*'. "CP = Covers Pattern.
endif.
Populate IT_CAT with fields which are REQUIRED.
Display upto 150 fields only.
loop at it_fields into wa_fields to 150.
Read table it_fname
read table it_fname into wa_fname with key fld = wa_fields-fieldname.
if sy-subrc = 0.
Move data from it_fields
wa_cat-tabname = p_tbname.
wa_cat-fieldname = wa_fields-fieldname.
wa_cat-col_pos = lv_cnt.
wa_cat-inttype = wa_fields-inttype.
wa_cat-datatype = wa_fields-datatype.
wa_cat-intlen = wa_fields-intlen.
wa_cat-seltext = wa_fields-fieldname.
wa_cat-decimals = wa_fields-decimals.
wa_cat-ref_field = wa_fields-fieldname.
wa_cat-ref_table = p_tbname.
append wa_cat to it_cat.
clear wa_cat.
lv_cnt = lv_cnt + 1.
endif.
endloop.
CREATE A DYNAMIC INTERNAL TABLE.
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_cat
importing
ep_table = it.
ASSIGN IT TO <FS>.
assign it->* to <fs_table>.
*Select the data from the table given as input and populate
it into the dynamic internal table created based on the where
condition.
select (it_fname)
from (p_tbname)
into table <fs_table>
where (lv_where).
if sy-subrc <> 0.
message 'No data found' type 'I'.
endif.
*Displaying dynamic internal table .
loop at <fs_table> assigning <fs_temp>.
write:/ <fs_temp> quickinfo 'CONTENTS'.
endloop.
endform. " FETCH_DATA
Best Regards,
Deepa Kulkarni -
Error in Call Method 'create_dynamic_table'.
Hi Experts,
i am working on Dynamic ALV.I have created a Dynamic Fieldcatalog,which is storing the correct field values as per requirement.
When I debbug the code: I get the following error when I am calling method 'create_dynamic_table'.
"Unable to interpret "MATERIALS(000010)". Possible 10 MATERIALS(000010)"
DATA: g_table TYPE REF TO data.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_fieldcat
IMPORTING
ep_table = g_table.
* EXCEPTIONS
* generate_subpool_dir_full = 1
* OTHERS = 2.
Please advice how do I approach this error.Is some change required in my piece of code?
Thanks.Hi Marcin,
Thanks for all the help,finally solved the issue.I made a small error while coding the Fieldcatalog:
now the changed code looks like the following code:
LOOP AT i_tckh3 INTO w_tckh3.
LOOP AT i_tckh1 INTO w_tckh1 WHERE elemt = w_tckh3-elemt.
lcount = lcount + 1.
WRITE w_tckh1-txele TO w_fieldcat-seltext LEFT-JUSTIFIED.
CONCATENATE 'KST' w_tckh3-el_hv INTO w_fieldcat-fieldname.
TRANSLATE w_fieldcat-fieldname TO UPPER CASE.
w_fieldcat-col_pos = lcount.
w_fieldcat-ref_field = 'KST001'.
w_fieldcat-ref_table = 'KEPH'.
w_fieldcat-datatype = 'CURR'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
CLEAR: w_tckh1.
ENDLOOP.
CLEAR:w_tckh3.
ENDLOOP.
Emphasis on the COncatenate statement in the loop.Earlier I was passing the TXELE field to fieldname,which was wrong.
Thanks a Ton!!!!
I have a small dount in the next step:While assigning the values to the final internal table:
LOOP AT i_final INTO w_final.
ASSIGN COMPONENT 'WERKS' OF STRUCTURE <i_value> TO <fs1>.
<fs1> = w_final-werks.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <i_value> to <fs1>.
<fs1> = w_final-matnr.
LOOP AT i_keph INTO w_keph WHERE kalnr = w_final-kalnr.
ASSIGN COMPONENT 'KST001' OF STRUCTURE <i_value> TO <fs1>.
<fs1> = <FS1> + w_keph-kst001.
ENDLOOP.
APPEND <i_value> TO <i_table>.
CLEAR: <i_value>.
ENDLOOP.
Now the LOOP AT I_KEPH: has all the values of the cost fields.I need to assign the appropriate value of KSTXXX to the corresponding Dynamic fieldcatalog:What should the procedure be.I am NOT able to check what values are there in dynamic calatog.
Hope this point is not too confusing.
Maybe you are looking for
-
My printer will only print in colour even though I have set it to print in grayscale. Any help? It was working perfectly fine before but it started acting this way ever since I came back from my holiday. I have tried reinstalling drivers but to no av
-
Runtime error when Transfering data from data object to a file
Hi everybody, I'm having a problem when I transfer data from data object to file. The codes like following : data : full_path(128). OPEN DATASET full_path FOR OUTPUT IN TEXT MODE ENCODING DEFAULT. and transfer data from flat structure to this file fu
-
Hi All, This is Rajani. I need help on LOOP AT SCREEN statement. I have 3 selection blocks in the selection screen. First block contains two radio buttions, the second block contains 6 parameters and the third block contains 3 parameters. If the firs
-
OAMCM upgrade to 10.1.4.2.0
Hi all, Can any one please tell me the patch number for Oracle Access Manager Configuration Manager to upgrade from 10.1.4.0.1 to 10.1.4.2.0. I coundn't found any where in metalink also. Thanks in advance. Siva Pokuri.
-
Hi, I have an issue in receiving OEM alerts if archive destination > n%. I'm trying to receive email notification if archive destination > 95%. In the target database, I set Metric and Policy Settings Archive Area Used (%) to warning 95. Then, in pre