Class not Found when accessing Proxy class from backing bean in VC.

Hi All,
I'm attempting to access a class of a webservice(generated as a proxy) within my ADF application and invoke the method within a backing bean of the View Controller(bean scope : backing bean). The proxy has generated an ObjectFactory class among other classes. When I access this Object factory class from within the backing bean, the application throws a Class not found error.
I don't know where the error lies since I've declared the View Controller of the ADF application dependent on the Proxy and I've imported the class and accessing it within a backing bean. How would you suggest I approach resolveing this.
JDev : 1.1.1.4
Thank you.
Regards
PP.

Hello Arun,
Thank you for suggesting a Data control, but my requirement isn't to drag and drop the method as a button. It's more of a behind the scnes updating data via a database adapter requirement.
I've resolved the issue. turns out, my deployment archive didn't include the proxy.jpr. Once included it works likea charm.
Thanks
PP.

Similar Messages

BW: The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
+
When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.
Thanks for your reply

Hi Shivraj,
BW 3.5 version
Thanks

The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
Can anyone help me with this? Thanks in advance for your reply

When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.

Website not found when accessed from iPad

I am hosting multiple websites from a single IP address and have come across the following problem. If I access it from my mac, the correct website is displayed, but if I use my iPad the web site is not found and my default website displays instead.
Checking the access log I can see a clear difference between what is passed from a mac and an ipad but don't know how to fix it, any suggestions greatly appreciated.
The Mac sends this
www.parksurgery-hursleyrd-ppg.org.uk 81.138.225.73 - - [03/Oct/2013:00:15:11 +0100] "GET / HTTP/1.1" 200 4857 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0"
The iPad sends this
www.advtraining.co.uk 192.168.1.73 - - [03/Oct/2013:00:22:03 +0100] "GET / HTTP/1.1" 200 7847 "http://www.parksurgery-hursleyrd-ppg.org.uk/" "Mozilla/5.0 (iPad; CPU OS 7_0 like Mac OS X) AppleWebKit/537.51.1 (KHTML, like Gecko) Version/7.0 Mobile/11A465 Safari/9537.53"
the website I am trying to display is www.parksurgery-hursleyrd-ppg.org.uk

Me too. 34000+ items.
Gotta wonder if that's a factor.
Just now I removed all remotes from iTunes.
(Prefs > Devices > Forget All Remotes)
Then I turned on Home Sharing on my iPhone.
(Tap the gear icon in the Library selection screen.)
Previously the iPhone was registered as a regular remote.
So both devices are controlling iTunes via home sharing.
Now iTunes is not crashing at all, in full-screen mode or otherwise.
Not sure if it will last, but time will tell.
Hope this is useful to you.
I'll post back if the crashes return.

BSP css & mime objects not found when accessed via iView in the Portal

Hi
A locally developed BSP Application has defined it's own CSS and MIME objects.
This works well when accessed via the Integrated ITS in ECC6.
However, when we access this the BSP application from an iView in a Portal (NW04S), the css and MIME objects do not appear to be loaded.
What are we missing?
Thanks
Doug

Hi Doug,
have you found out the reason for this issue, i encountered the same problem when i access the HCM_LEARNING bsp, would you please give some addvice if you have any idea?
thanks,
billy

404 File not Found when accessing Video Web server

I am trying to access a Video Web server remotely. Everything works fine on a PC and also on Internet Explorer for Mac.
When I login using Safari I get the error message "404 File not Found" "The requested URL was not found on this server"
I have been successful twice through Safari but after that it doesn't seem to work for days.
I have removed all cookies, emptied the Cache, reset safari, deleted all keychain access references to the website.
It seems to be a security issue but I am not sure what else to do.
Any ideas would be greatly appreciated

Try using open DNS:
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)

Structure field Umskd not found when access team calendar view in MSS.

Hello.
I am keep getting the following error message in my portal when access team calendar view in MSS portal. I am running EP 7.0 with ERP2005 as my back-end system:
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcSelectionList.SelectList.Output.Ex_Request_List): structure field Umskd not found
    at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
    at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
Since I am new to MSS portal, I don't know what infor I am missing. Please advice.
Best regards,
Phuong.

Hi Vinod Patil,
I just get the problem solved. I may show you the way and hope it help.
First you should apply the SAP note 1058240 (I am in EA-HR 600 level 27 but we still need to apply) into R/3 server. This note is asking you to patch a .SAR (I have no idea on this file) and you may ask your basis to import it. Make should it is imported and the restart the portal server.
This is what we do to solve the problem. Thanks.
Regards,
WaiWeng

JNDI not found when trying to communicate from websphere to weblogic server

Hi,
we have a J2EE application in which the client is a standalone program or may reside in any of the application server. But our EJB component is deployed in the weblogic server.
Earlier the client program which contacts the EJB is a standalone program and it uses the weblogic initial context factory and t3 protocol and we will have the weblogic.jar in the classpath.
but there is a new requirement as our new client is in websphere and it has to contact the weblogic server through IIOP protocol and websphere initial context factory. Please let me know what i need to do?
Since iam new to websphere and i am having no clue to establish the communication. I tried to use both IIOP protocol and wesphere initial context factory.but still i get exception as the JNDI name not found.
Guidance is appreciated.
Thanx in advance.

To be in same page, iam running the client program using the IBM jre and using all the websphere client jars set in classpath. This program conatins intial context factory as "com.ibm.websphere.naming.WsnInitialContextFactory" and provider url as "iiop://hostname:portnumber" it contacts the EJB bean method which is hosted on the weblogic server on the "hostname" machine. When it tries to contact i get the errror as
"javax.naming.NameNotFoundException: Context: , name: java.iecc.env.ejb.elf.client_new(My JNDI name): First component in name java.iecc.env.ejb.elf.client_new not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]"

How to directly call business object class from backing bean class

I woul like to call business object class directly from the backing bean class and implement methods in BO. If possible can anyone give an example code.
Thanks in advance

Which problems are you occurring then? I really don't see problems. You're just free to access and invoke them.

Error when calling Stored Procedure from backing bean

I am using Jdeveloper 11.1.1.6 and am trying to utilize the following URL to execute a SP from a backing bean: http://ramannanda.blogspot.com/2011/11/optimized-update-insert-adf.html
The reason I am looking at this is currently I have coded my backing bean to perform inserts and deletes through the use of my View Objects. I am performing up to a combined 5-10K inserts and deletes and the performance is rather slow. If there is a way to tune the view objects as well as the commit to be much faster, that is the prefered method. If that can't be done then I would like to figure out the approach identified in the URL.
I have highlighted a section of code below that is failing when using the URL approach. It errors out with the following exception: javax.el.ELException: oracle.jbo.JboException: java.sql.SQLException: Internal Error: Inconsistent catalog view
Do you have thoughts as to what might cause this exception.
create or replace
type TYP_TEST_R is object
     Test_Id Number(5,0) ,
     Test_Num Number(7,0)
create or replace
type TYP_TEST_TB as table of TYP_TEST_R;
private void myMethod(MyTableVORowImpl pCurrentRow) {
int i = 0;
DCIteratorBinding lDciter =
(DCIteratorBinding)getBindings().get("MyTable1Iterator");
MyAppModuleAMImpl lMyAppModuleAMImpl =
(MyAppModuleAMImpl)lDciter.getViewObject().getApplicationModule();
Connection lConnection =
lMyAppModuleAMImpl.getDBTransaction().createStatement(1).getConnection();
StructDescriptor lTblRecordStructType =
StructDescriptor.createDescriptor("DBADMIN.TYP_TEST_R",
lConnection);
.....<additional logic here>......
Object lArray[] = new Object[lSortedDifferences.size()];
while (........) {
Number lNumber = .......
Number lDifferentStore = (Number)lDifferentIterator.next();
STRUCT lTempStruct =+_
new STRUCT(lTblRecordStructType, lConnection,+_
*new Object[] { pCurrentRow.getTestId(),*+_
lDifferentStore });+_
lArray[i] = lTempStruct;
i = i + 1;
//create array structure descriptor
ArrayDescriptor lTableDesc =
ArrayDescriptor.createDescriptor("DBADMIN.TYP_TEST_TB",
lConnection);
//create an Array type with given structure definition
ARRAY lTableArray =
new ARRAY(lTableDesc, lConnection, lArray);
String lCallableProcedureStatement =
" begin DBADMIN.SP_TEST(?,?); end;";
OracleCallableStatement lOracleCallableStatement = null;
lOracleCallableStatement =
(OracleCallableStatement)lMyAppModuleAMImpl.getDBTransaction().createCallableStatement(lCallableProcedureStatement,
0);
lOracleCallableStatement.setARRAY(1, lTableArray);
lOracleCallableStatement.setString(2,
(String)ADFUtil.evaluateEL("#{sessionScope['UserName']}"));
lOracleCallableStatement.executeUpdate();
}

That was helpful and now I can execute up to my last line of code: "lOracleCallableStatement.executeUpdate();"
This code executes the SP.
My SP is as follows:
create or replace
PROCEDURE          SP_TEST
*( param1 IN TYP_TEST_TB,*
param2 IN VARCHAR2) as
CURSOR for_insert_csr IS
SELECT *
FROM TABLE(param1) T1;
temp_update TYP_TEST_R;
BEGIN
FOR temp_update IN for_insert_csr
LOOP
-- do stuff in this loop
END LOOP;
end;
When trying to execute the SP, I get the following error:
+<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase INVOKE_APPLICATION 5+
javax.el.ELException: oracle.jbo.JboException: java.sql.SQLException: ORA-06550: line 1, column 7:*
PLS-00201: identifier DBADMIN.SP_TEST must be declared*
ORA-06550: line 1, column 7:*
PL/SQL: Statement ignored*
at com.sun.el.parser.AstValue.invoke(Unknown Source)*
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)*
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1300)*
at oracle.adf.view.rich.component.UIXDialog.broadcast(UIXDialog.java:97)*
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)*
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)*
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)*
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)*
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)*
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)*
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)*
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)*
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)*
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)*
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)*
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)*
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)*
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)*
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)*
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)*
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)*
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)*
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)*
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)*
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)*
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)*
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)*
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)*
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)*
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)*
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)*
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)*
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)*
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)*
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)*
at java.security.AccessController.doPrivileged(Native Method)*
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)*
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)*
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)*
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)*
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)*
Do you have any suggestions on what I might want to try?

Access AM method from backing bean - best practice

Hello,
I need to call an appModule method from a backing bean. What is better?
1. Resolve bindings.AMDataControl.dataProvider, get AM and invoke the method directly
or
2. Create method action in page definition, resolve OperationBinding from it's binding expression and execute the operationBinding
I don't need to have a button on the page for this method.
Rado

Good question Rado.
With a "flexible" framework like Oracle ADF, I also ask myself sometimes what would be the preferred approach to do things.
See also these forum threads:
- about "ADF Faces: Passing values from a managed bean to ADF BC module"
http://forums.oracle.com/forums/thread.jspa?threadID=486742
- about : "ADF Faces: getting selected row data in multi select table ..."
http://forums.oracle.com/forums/thread.jspa?threadID=503248
regards
Jan Vervecken

/apex/wwv_flow.accept not found when accessing remotely after XE upgrade

Hi,
I upgraded my XE instance to APEX 3.2 and enabled remote connections using:
exec dbms_xdb.setListenerLocalAccess (l_access => FALSE);
Now, when I edit items or insert records on my created page, I end up getting a timeout accessing the wwv_flow.accept file.
For example, if I follow these steps:
1. Log into APEX remotely as workspace administrator (successful)
2. Navigate to application definition (successful)
3. Make a change to global notification and click APPLY CHANGES
4. The brower will time out on http://x.x.x.x:8080/apex/wwv_flow.accept
Note that there is no 404 error. Rather the browser simply times out. It doesn't matter if I use the ip or server name. I've removed all proxy settings, so it can't be that...
Some APEX items work, I suppose anything that does not reference wwv_flow.accept. For example, I can update an existing record (just not insert).
Also, everything works perfectly when I am accessing from the local server through the loopback interface.
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
Application Express 3.2.1.00.12
Thanks - I appreciate any help!
-Matt

Hi, have you allowed all of the following programs through the firewall:
\oraclexe\app\oracle\product\10.2.0\server\BIN\omtsreco.exe
\oraclexe\app\oracle\product\10.2.0\server\BIN\LSNRCTL.EXE
\oraclexe\app\oracle\product\10.2.0\server\BIN\oracle.exe
\oraclexe\app\oracle\product\10.2.0\server\BIN\TNSLSNR.EXE

Compilation Error for import classes not found in generated Proxy Class

Hi,
We are generating java classes for the COM dll using JCOM com2java compiler.
We are getting a compilation error for import class not found when compiling the
generated Proxy java source code. It can't find the com.bea.jcom.Dispatch class that
the generated Proxy java source code extends. It also can't find com.bea.jcom.Variant
or com.bea.jcom.Param. These are interfaces or data types or classes used by COM
library.
I added weblogic.jar to my class path and the only Dispatch class i found inside
the weblogic.jar is com.linar.jintegra.Dispatch;
We have com objects for which we want to develop an EJB client to interface with
the COM object using JCOM with Native Mode disabled.
Any help on the compilation error..I tried changing the extends for Dispatch to com.linar.jintegra.Dispatch
but the other errors are still there.
To begin with, I think the generated code should not refer to any of the COM data
types.
Any help please.
Thank you in advance,
Regards,
Rahul Srivastava
[email protected]

Hi,
I resolved the other errors by changing all references from com.bea.jcom.Variant
etc to com.linar.jintegra.class name..all were present under the com.linar.jintegra
package.
Thank you all anyways,
Regards,
rahul
"Rahul Srivastava" <[email protected]> wrote:
>
Hi,
We are generating java classes for the COM dll using JCOM com2java compiler.
We are getting a compilation error for import class not found when compiling
the
generated Proxy java source code. It can't find the com.bea.jcom.Dispatch
class that
the generated Proxy java source code extends. It also can't find com.bea.jcom.Variant
or com.bea.jcom.Param. These are interfaces or data types or classes used
by COM
library.
I added weblogic.jar to my class path and the only Dispatch class i found
inside
the weblogic.jar is com.linar.jintegra.Dispatch;
We have com objects for which we want to develop an EJB client to interface
with
the COM object using JCOM with Native Mode disabled.
Any help on the compilation error..I tried changing the extends for Dispatch
to com.linar.jintegra.Dispatch
but the other errors are still there.
To begin with, I think the generated code should not refer to any of the
COM data
types.
Any help please.
Thank you in advance,
Regards,
Rahul Srivastava
[email protected]

Few basic doubts about accessing AM from backing bean class

Hi ADF experts,
I have just started working in ADF Faces.I made a sample search page.My page is attached to a managed backing bean. I have attached command button on my page to a custom method in backing bean class.
So on, click of button this method is called in backing bean.Now, i have few doubts:
1)How to get values of various UI beans in this event code?
2)I am accesing AM , in my method with this code:
FacesContext facesContext = FacesContext.getCurrentInstance();
ExternalContext extContext = facesContext.getExternalContext();
Application app = facesContext.getApplication();
DCBindingContainer binding = (DCBindingContainer)app.getVariableResolver().resolveVariable(facesContext, "bindings");
//Accessing AM
ApplicationModule am = binding.getDataControl().getApplicationModule();
iS this correct ?
3) After getting handle of am how to call my custom method in AM Class?there was "invokeMethod" API in application module class in OAF, is there any such method here?
Please help me.
--ADF learner.

Thanks for ur response Frank, actually I am from OA Framework back ground.It would be great if help us a little with ur valuble thoughts.
OA Framework also uses bc4j in model layer of framework. We have a requirement where our existing developers from OA Framework have to move to ADF to make a new application where time lines are quite strict.If this would not be possible we will switch to plain jsp and jdbc,but our tech experts say ADF Faces is the best tech.
In OA Framework, Application Module is key class for all busiess logic and Controller is used for page navigation. So, I m just trying to find the same similarity , where we write we add all event codes in custom action methods in the backing bean class of page, which we consider equivalent to process form request method in Controller class of OAF.
But there are two things, I still want to know:
1)While page render, how to call specific AM methods(like setting where clause of certain VOs)
2)In action methods, the way i described(I found that in one thread only)to access AM, what is wrong in that?Also, I went through
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html
where coule of examples use similar approach to access AM from backing bean class and call custom methods of AM(Doing various, deletes etc from VOs).
3)In these methods can we set any property of beans on the page, I am asking because in OAF, generally we use PPR for js alternatives.But all properties of beans cannot be set in post event.
Thanks and Regards
--ADF Learner

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

Class not Found when accessing Proxy class from backing bean in VC.

Similar Messages

Maybe you are looking for