Class type 013: class SAP_KKR_CLASS is not valid today

Dear Sir,
          At the time of production order saved one error comes i.e. Class type 013: class SAP_KKR_CLASS is not valid today.
           Thanks
           Parag

Hi ,
The error message is issued because of your customizing or
class missing in your system.
You have two options to resolve the problem depending on your business
requirement in Controlling:
1) If you required classification in controlling, you need to generate
class SAP_KKR_CLASS via OKQ3.
2) If you don't require classification in controlling, you could
deactivate 'Classification' indicator for the order type via OPJH.
More infos on this issue can be found in the mentioned note 356327.
best regards

Similar Messages

Payment Type Your payment method is not valid in this Store. Please enter a new payment method.

Hi All,
I am suffering for long time with subjected error BUT UNFORTUNATELY iTune doesn't have any salutation for this which is strange, same Payment Method is working for old devices BUT NOT WORKING with new bought "Mac Book Pro" and now don't know where should I go or what should to do, anyway's my advice to all of them who are planing to buy new device or switch to other once MUST HAVE TO THINK this kind of error if accrued what will be happened...
Thanks

Thank you so much for post, actually I have already App Store account for years and infect same account is perfectly with old device but over new bought "MacBook Pro" doesn't accept even I put new Credit Cards as well, one of very bad ERROR by iTune where even they are not able to help their clients out.

Extension Icons: "'DarkNormal', 'DarkRollover' of attribute 'Type' on element 'Icon' is not valid.."

Sorry for the cross-post here, but I honestly don't know which forum this should be under (applies to both, as do most posts here):
http://forums.adobe.com/message/5203522

Hi Louis, thanks for the info!
I just tested the 3.0 manifest in CS5/5.5, and it causes the extension to not appear. So it seems like I'll have to build separate versions for CS5 & CS6, and bundle the two builds together (bloating the final package in the process).
I haven't been able to test the icons in CS6 yet, as I am affected by this bug:
http://forums.adobe.com/message/4987214 (which hasn't been addressed)
Furthermore, from: http://forums.adobe.com/thread/1113624
Some extensions do not have a Retina ready icon and thus will be blank when you have the panel minimized. In most cases like these, we may have to wait until the manufacturer also releases a HiDPI version of the Extension.
Where is the documentation for this? Why are statements like this being made by staff (putting it on the extension developers), when Adobe has released NO implentation details—afaik, it's not even supported. With all due respect, the developer ecosystem for extensions is hideous.

"Property value is not valid" when PropertyGridView tries to convert a string to a custom object type.

Hi,
I have a problem with an PropertyGrid enum property that uses a type converter.
In general it works, but when I double clicking or using the scoll wheel, an error message appears:
"Property value is not valid"
Details: "Object of type 'System.String' cannot be converted to type 'myCompany.myProject.CC_myCustomProperty."
I noticed that the CommitValue method (in PropertyGridView.cs) tries to convert a string value to a CC_myCustomProperty object.
Here is the code that causes the error (see line 33):
(Using the .net symbols from the PropertyGridView.cs file)
1
        internal bool CommitValue(GridEntry ipeCur, object value) {
2
3
            Debug.WriteLineIf(CompModSwitches.DebugGridView.TraceVerbose,  "PropertyGridView:CommitValue(" + (value==null ? "null" :value.ToString()) + ")");
4
5
            int propCount = ipeCur.ChildCount;
6
            bool capture = Edit.HookMouseDown;
7
            object originalValue = null;
8
9
            try {
10
                originalValue = ipeCur.PropertyValue;
11
12
            catch {
13
                // if the getter is failing, we still want to let
14
                // the set happen.
15
16
17
            try {
18
                try {
19
                    SetFlag(FlagInPropertySet, true);
20
21
                    //if this propentry is enumerable, then once a value is selected from the editor,
22
                    //we'll want to close the drop down (like true/false).  Otherwise, if we're
23
                    //working with Anchor for ex., then we should be able to select different values
24
                    //from the editor, without having it close every time.
25
                    if (ipeCur != null &&
26
                        ipeCur.Enumerable) {
27
                           CloseDropDown();
28
29
30
                    try {
31
                        Edit.DisableMouseHook = true;
32
/*** This Step fails because the commit method is trying to convert a string to myCustom objet ***/
33
                        ipeCur.PropertyValue = value;
34
35
                    finally {
36
                        Edit.DisableMouseHook = false;
37
                        Edit.HookMouseDown = capture;
38
39
40
                catch (Exception ex) {
41
                    SetCommitError(ERROR_THROWN);
42
                    ShowInvalidMessage(ipeCur.PropertyLabel, value, ex);
43
                    return false;
44
I'm stuck.
I was wondering is there a way to work around this? Maybe extend the string converter class to accept this?
Thanks in advance,
Eric

Hi,
Thank you for your post! I would suggest posting your question in one of the MS Forums,
MSDN Forums » Windows Forms » Windows Forms General
located here:http://forums.microsoft.com/MSDN/ShowForum.aspx?ForumID=8&SiteID=1.
Have a great day!

The definition of base class Application was not found.

Hello:
I have been coding in Flash Builder Burrito and publishing to my Xoom for a few weeks. All of a sudden at the end of the day I'm getting this compiler error which says:
1017: The definition of base class Application was not found. AppName.mxml /AppName/src Unknown Flex Problem
I sometimes hit the wrong key with I try to copy and paste and all of a sudden a new window will open for source of a default component which I never wanted to edit. I'm afraid I somehow deleted or modified the default class defnition of Application?
I don't understand why this would come out of the blue, I was working on a function within a class that was drawing points ... Then all off a sudden I'm getting this error and it's driving me nuts.
I tried to reinstall FB Burrito on my Mac, but after all that work it still says the same thing. Wouldn't it replace the default class defs?
Please help!

Wow, some really strange behavior.
OK, so here is what I'm going through. I reinstall, import the project and compiles.
Then I uncomment the new section which contains the following code:
lineStyle(1.0,0x8ea4bf);
var line_commands:Vector.<int> = new Vector.<int>();
line_commands.push(GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO);
var line_coord:Vector.<Number> = new Vector.<Number>();
line_coord.push(0,0, newW, angle, newW, (newH+angle), 0, newH);
drawPath(line_commands, line_coord);
I get 3 diffrent errors, which lead up to the error listed in the topic.
At first it says that "int" isn't a valid type and it points to this line:
var line_commands:Vector.<int> = new Vector.<int>();
Then I take int out so the line looks like this:
var line_commands:Vector = new Vector();
Then it says I can't nest classes and it points to the main MXML. I go to the main MXML then the error switches to say "The definition of base class Application was not found.".
I did figure out how to fix this with out reinstalling. I have to delete the project from my list (making sure to comment out the code above), then re-launch FB Burrito, then re-import the project and it works.
This is way nuts! I dont understand ... am I crazy?

Object class name does not exist in IDM

Hi Team
We are process of Integrating GRC 10.1 to Enterprise Portal.Followed accordingly as per the SAP Note No. 1977781.
While running the Schema Job, we get a message Schema Imported Suxcessfully. While running the Job : GRAC_REPOSITORY_SYNC_JOB, the job
shows successful, but a Warning Message : User Adaptor Empty in SLG1 T.code.
I have checked the Path suffix,connectors,data source and all are maintained but no sure about this warning message.
Secondly,I tried for test creation of user on Portal via GRC 10.1.I am getting below error
"Object class name does not exist in IDM" Please see log below
Request gets closed stating Auto Provisioning failed.Please advice if someone has faced same issue and the steps taken to rectify it.
Thanks
Nitesh

Hi Nitesh,
We worked on this issue for quiet sometime with SAP to get this finally fixed You can check all below mentioned notes.
First Check:
Please check the Note: 1915763 - Error Provisioning from GRC 10 to SAP Portal while adding or removing a role in Change Account request type.
This Note says that if your LDAP set as data source is read-only in Portal, then you need to change it to Modifiable in order to allow create or change user belonging to LDAP.
We have set the UME correctly and no longer read-only. But our access requests still used to fail with the following messages.
"Object class name does not exist in IDM".
Second Check:
Kindly ensure the field mapping for portal is done in IMG settings properly.
If it is fine please check below note 2033714 - AC10.0: error in SGL1 "Object class name does not exist in IDM".
This note is only to check if you have made any mistake with your portal mapping and doesn't address the correct issue.
Third Check:
Finally after implementing SAP note 1941250 - UAM: Truncated parameters provisioned on changing users from Access Request
our issue got fixed.
Regards,
Madhu.

Getting Error base class BitmapAsset was not found

I am converting a project using Away3D boomstick to the new FL11 version. I have installed the 4.5.1 SDK, dropped in the new away3d classes, added the flashplayer11_b1_playerglobal_071311.swc and now I get the following error.
Description Resource Path Location Type
1017: The definition of base class BitmapAsset was not found. Mercer-Molehill line 10 Flex Problem
Any Ideas? I really need to get this working for a demo tomorrow.

It seem the right playergloblal is not accessed. If You compile in Flash IDE make sure that ActionsScript Settinng is configure with the rigth paths.
The SDK 4,5 has change the name of flex.swc to core.swc and others files.
Flex 4.5 Framework Differences
flex.swc and utilities.swc were renamed to core.swc and authoringsupport.swc
The datavisualization.swc was split into charts.swc and advancedgrids.swc.
Path to sdk
I put all those SWC in a folder in C:\Program Files (x86)\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\flex_sdk\4.5\
Flash Actionscript settings. -> library path ->add the path till sdk
Configure globalplayer.swc. in Flash
in Common-Configuration/Player created a copy of FlashPlayer10_3.xml to FlashPlayer11.xml.
<player id="FlashPlayer11" version="12" asversion="3">
<name>Flash Player 11</name>
Finally
Flash Actionscript settings. -> library path ->add path till globalplayer
it work for me. ( tell me if I done wrong please).

Class CL_RSR_QUERY_VARIABLES does not exit anymore

Dear all,
Class CL_RSR_QUERY_VARIABLES does not exist anymore in NW04s. Does anybody know what is the new class that substitutes it?
Thanks and regards,
Flavia Sanchez

Hi Michael,
I am the guy responsible for this development.
The class is used in a function module to execute a BW Query and return a xml string within a BSP application. The result table of the query is used within the BSP application logic to fill the graphical presentation layer that consitutes the front end of the BSP application.
Here is the statement within the FM where the class is used:
DATA: wf_query_var TYPE REF TO cl_rsr_query_variables .
Here is the call to the FM within the BSP application (Even Handler: OnInputProcessing):
      CALL FUNCTION 'Z_RMZ_BW_SEM_NGRM_EXE_QRY'
        EXPORTING
          QUERY_NAME            = rpt_tech_id
        IMPORTING
          XML_OUT               = xml_out
          REF_RESULT_TAB        = res_tab
        TABLES
          QUERY_VARIABLES       = var
          RETURN                = breturn
          META                  = meta
        EXCEPTIONS
          BAD_VALUE_COMBINATION = 1
          USER_NOT_AUTHORIZED   = 2
          UNKNOWN_ERROR         = 3
          QUERY_NOT_FOUND       = 4
          OTHERS                = 5.
If this class does not exist with this name in NW then I assume it must exist as another object since this is THE class for programming with query variables.
Thanks for your support.
Greetings,
Martin

Share a base class or to not share?

Hey,
I have entity type category and another entity type - logisitchierarchy.
From the business prespecive they have nothing in common.
From the structre prespective - they both have a tree (hierarchy structre - parent - childs) - so they share "structre functionality" like calculate path , get root and etc.
if for each i write the structre and they not share the same base, fix for the base structre - for example you discover that the best way to model tree is with addtional column for calculate-path..., will required to fix it in all "trees structre" in the application.
in addtional base class for all make it easier to share structre functionalty.
what is your opinion - does common structre (a one that required complex functuionality) are a good reason to inherit from the same class?

avihai wrote:
what is your opinion - does common structre (a one that required complex functuionality) are a good reason to inherit from the same class?Absolutely not.
If you have shared code then you can implement that as separate class which you use via composition. The form of that class can vary but it might have only static methods.
However be careful to insure that the code is in fact actually shared. If you need to add flags to define significantly different execution paths then the fact the code is similar doesn't mean it is the same. And thus it should not be shared at all.

Package divelog: Class divelog.Welcome not found in declaration

DiveLog.java:61: Class divelog.Welcome not found in type declaration.
new Welcome(),
private void populateTabbedPane()
tabbedPane.addTab("Welcome",
null,
new Welcome(),
"Welcome to the Dive Log");
Welcome.class exist in same directory as DiveLog.java

is it public ?

JPA Generic entities classes Mappedsuperclass are not possible!

Hi,
I have came to understand this:
You can use generics with fields in a class, but you cannot make the class generic or a collection in a generic form. I hope that I stated what I wanted correctly.
This is the normal generics known to JPA!
public class MyEntity{
@OneToMany
List<OtherEntity> others;But the next is not allowed!
public class MyEntity<T extends OtherEntity>{
@OneToMany List<T> other;
}Please comment on this if this is true or false, as I have encountered this error while trying the same!
I am using Toplink for a desktop Application
Thank you
javax.persistence.PersistenceException: No Persistence provider for EntityManager named Access1: Provider named oracle.toplink.essentials.PersistenceProvider threw unexpected exception at create EntityManagerFactory:
oracle.toplink.essentials.exceptions.PersistenceUnitLoadingException
Local Exception Stack:
Exception [TOPLINK-30005] (Oracle TopLink Essentials - 2.0 (Build b58g-fcs (09/07/2007))): oracle.toplink.essentials.exceptions.PersistenceUnitLoadingException
Exception Description: An exception was thrown while searching for persistence archives with ClassLoader: sun.misc.Launcher$AppClassLoader@fabe9
Internal Exception: javax.persistence.PersistenceException: Exception [TOPLINK-28018] (Oracle TopLink Essentials - 2.0 (Build b58g-fcs (09/07/2007))): oracle.toplink.essentials.exceptions.EntityManagerSetupException
Exception Description: predeploy for PersistenceUnit [Access1] failed.
Internal Exception: java.lang.ClassCastException: sun.reflect.generics.reflectiveObjects.TypeVariableImpl cannot be cast to java.lang.Class
        at oracle.toplink.essentials.exceptions.PersistenceUnitLoadingException.exceptionSearchingForPersistenceResources(PersistenceUnitLoadingException.java:143)
        at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:169)
        at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:110)
        at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:83)
        at edu.acis.ccms.ui.MainRMIServerInterface.connectDB(MainRMIServerInterface.java:342)
        at edu.acis.ccms.ui.MainRMIServerInterface.<init>(MainRMIServerInterface.java:102)
        at edu.acis.ccms.ui.MainRMIServerInterface.main(MainRMIServerInterface.java:1804)
        at edu.acis.ccms.main.Main.runCCMSServer(Main.java:18)
        at edu.acis.ccms.main.Main.main(Main.java:35)
Caused by: javax.persistence.PersistenceException: Exception [TOPLINK-28018] (Oracle TopLink Essentials - 2.0 (Build b58g-fcs (09/07/2007))): oracle.toplink.essentials.exceptions.EntityManagerSetupException
Exception Description: predeploy for PersistenceUnit [Access1] failed.
Internal Exception: java.lang.ClassCastException: sun.reflect.generics.reflectiveObjects.TypeVariableImpl cannot be cast to java.lang.Class
        at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:643)
        at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.callPredeploy(JavaSECMPInitializer.java:171)
        at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initPersistenceUnits(JavaSECMPInitializer.java:239)
        at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initialize(JavaSECMPInitializer.java:255)
        at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:155)
        ... 7 more
Caused by: Exception [TOPLINK-28018] (Oracle TopLink Essentials - 2.0 (Build b58g-fcs (09/07/2007))): oracle.toplink.essentials.exceptions.EntityManagerSetupException
Exception Description: predeploy for PersistenceUnit [Access1] failed.
Internal Exception: java.lang.ClassCastException: sun.reflect.generics.reflectiveObjects.TypeVariableImpl cannot be cast to java.lang.Class
        at oracle.toplink.essentials.exceptions.EntityManagerSetupException.predeployFailed(EntityManagerSetupException.java:228)
        ... 12 more
Caused by: java.lang.ClassCastException: sun.reflect.generics.reflectiveObjects.TypeVariableImpl cannot be cast to java.lang.Class
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.objects.MetadataAccessibleObject.getRawClass(MetadataAccessibleObject.java:120)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataHelper.isEmbedded(MetadataHelper.java:732)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.buildAccessor(ClassAccessor.java:193)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.processAccessorFields(ClassAccessor.java:541)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.processAccessors(ClassAccessor.java:567)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.processMappedSuperclass(ClassAccessor.java:1128)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.MappedSuperclassAccessor.process(MappedSuperclassAccessor.java:63)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.processMappedSuperclasses(ClassAccessor.java:1138)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.process(ClassAccessor.java:495)
        at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataProcessor.processAnnotations(MetadataProcessor.java:240)
        at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.processORMetadata(PersistenceUnitProcessor.java:370)
        at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:607)
        ... 11 moreEdited by: hmulhim on Feb 27, 2008 3:00 AM
Edited by: hmulhim on Feb 27, 2008 3:01 AM

No you will be unable to make the Entities generic. The provider will be unable to map the relationship to the specific type defined by the generic definition as this type is assigned when the Entity is created in code not where the Entity is defined. Remember when designating Generics the Collection (in this case) is limited only to those types. The Provider can not possibly be this restrictive on a per Entity instance basis. In some cases changing the type may result in entirely different tables being mapped for a single Entity instance and that is definitely not supported.
Having said that this is a pretty poor exception that I will file a bug for.
--Gordon

'invalid class-java beans not available for import

Hi Experts,
i am using java bean model in my Web Dynpro Application.
for that one i have created command bean(Customer) and in my command bean i am using some other class(CustomerInfo) as reference. this CustomerInfo class contains 4 attribtes(name ,id ,etc all are of type String)
when i try to import these 2 class into web dynpro (using java bean model),for the Customer class it
is giving an error message 'invalid class-java beans not
available for import'.but 2nd class(CustomerInfo) is imported successfully with out giving the error.what might be reason.
any help will be appriciated
Thanks in advance
With Regards
Naidu

Naidu,
Please try to repeat JavaBean model import when running IDE in console mode (correspondign short-cut should be available in Windows Start menu, otherwise just copy original short-cut, edit it and change in command string "javaw" to java).
Post here what is shown on console during import.
VS

ERROR: serializable class HelloComponent does not declare a static final

Hi everyone! I'm sorry but I'm a newbie to Java and I'm having some, I assume, basic problems learning to compile and run with javac. Here is my code:
import javax.swing.* ;
import java.awt.* ;
public class MyJava {
* @param args
public static void main(String[] args)
// TODO Auto-generated method stub
JFrame frame = new JFrame( "HelloJava" ) ;
HelloComponent hello = new HelloComponent() ;
frame.add( hello ) ;
frame.setSize( 300, 300 ) ;
frame.setVisible( true ) ;
class HelloComponent extends JComponent
public void paintComponent( Graphics g )
g.drawString( "Hello Java it's me!", 125, 95 ) ;
And here is the error:
1. WARNING in HelloJava.java
(at line 20)
class HelloComponent extends JComponent {
^^^^^^^^^^^^^^
The serializable class HelloComponent does not declare a static final serialVersionUID field of type long
ANY HELP WOULD BE GREAT! THANKS! =)

Every time I extend GameLoop, it gives me the warning
serializable class X does not declare a static final serialVersionUID field of type long
This is just a warning. You do not need to fix this because the class you are writing will never be serialized by the gaming engine. If you really want the warning to go away, add the code to your class:
static final long serialVersionUID=0;

Message no. B1402- Table KONP for object class COND_A is not defined.

Hi
I m using BD52 transaction for message type COND_A and am getting this error for table KONP saying it is not defined for COND_A.
Can you please let me know which transaction is used to update this information.
Thanks in advance
Sana

In note 309342, for error message no.B1402, following solution is given.
Solution
The system issues warning message B1402 " Table KONP for object class COND_A does not exist" for each entry with table KONP and you can ignore this by pressing Enter respectively. Then you can maintain the entries or navigate.
If the KONP entries bother you since you use Transaction BD52 frequently, you can remove them manually. To do this, you can also use Transaction BD52. The functions are not changed by this deletion. However, the issue of the bothering warning message is suppressed. Table TBD62 is client-dependent that is, you have to make the correction on each active client.
A related problem exists with table TBD22. During the setup of reductions (that is, new output types which only send a subset of the data of output type COND_A), the corresponding entries in table TBD62 (Transaction BD52) are generated from table TBD22. To avoid the same problem as described above with the new output types, remove the entries of TBD22 with MESTYP COND_Y and CDTABNAME KONP. You can do this with the help of view V_TBD. Transaction SM30, as an output type, select COND_A. Here, remove all entries with segment type EKONP and table name KONP.
Table TBD22 is client-independent.
A correction of tables TBD22 and TBD62 by means of an R/3 Support Package is not possible since the tables have delivery classe 'G'. SAP cannot delete entries in the tables.
thanks
G. Lakshmipathi

The serializable class SpacePainter does not declare a static final serial

The serializable class SpacePainter does not declare a static final serialVersionUID field of type longWhat does this mean??? It appears as a warning in Eclipse but I have no idea what it is. It happens when I create a class the extends JFrame or JCompnent or JApplet. I finnally got it to stop with this:
static final long serialVersionUID = 1;

Because your eclipse is configured that way. You can probably filter the warning. You don't have to implement the serialVersionUID, but you should if you really serialize the exceptions.

Class type 013: class SAP_KKR_CLASS is not valid today

Similar Messages

Maybe you are looking for