Object class name does not exist in IDM

Hi Team
We are process of Integrating GRC 10.1 to Enterprise Portal.Followed accordingly as per the SAP Note No. 1977781.
While running the Schema Job, we get a message Schema Imported Suxcessfully. While running the Job : GRAC_REPOSITORY_SYNC_JOB, the job
shows successful, but a Warning Message : User Adaptor Empty in SLG1 T.code.
I have checked the Path suffix,connectors,data source and all are maintained but no sure about this warning message.
Secondly,I tried for test creation of user on Portal via GRC 10.1.I am getting below error
"Object class name does not exist in IDM" Please see log below
Request gets closed stating Auto Provisioning failed.Please advice if someone has faced same issue and the steps taken to rectify it.
Thanks
Nitesh

Hi Nitesh,
We worked on this issue for quiet sometime with SAP to get this finally fixed You can check all below mentioned notes.
First Check:
Please check the Note: 1915763 - Error Provisioning from GRC 10 to SAP Portal while adding or removing a role in Change Account request type.
This Note says that if your LDAP set as data source is read-only in Portal, then you need to change it to Modifiable in order to allow create or change user belonging to LDAP.
We have set the UME correctly and no longer read-only. But our access requests still used to fail with the following messages.
"Object class name does not exist in IDM".
Second Check:
Kindly ensure the field mapping for portal is done in IMG settings properly.
If it is fine please check below note 2033714 - AC10.0: error in SGL1 "Object class name does not exist in IDM".
This note is only to check if you have made any mistake with your portal mapping and doesn't address the correct issue.
Third Check:
Finally after implementing SAP note 1941250 - UAM: Truncated parameters provisioned on changing users from Access Request
our issue got fixed.
Regards,
Madhu.

Similar Messages

Name does not exist in namespace

Want to access an IValueConverter in my XAML. But getting the "name does not exist in namespace" error in the <conv:StringToVisibilityConverter x:Key="cv" /> statement. I know the class is there because intellisense
shows it. I have rebuilt the project, still get the error.
the error is:
The tag 'StringToVisibilityConverter' does not exist in XML namespace 'clr-namespace:WpfApplication1'.
How do I reference an IValueConverter class in XAML?
thanks,
<Window x:Class="WpfApplication1.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:conv="clr-namespace:WpfApplication1"
Title="MainWindow" Height="350" Width="525">
<Window.Resources>
<conv:StringToVisibilityConverter x:Key="cv" />
</Window.Resources>
<Grid>
</Grid>
</Window>
using System;
using System.Collections.Generic;
using System.Globalization;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows;
using System.Windows.Data;
namespace WpfApplication1
public class StringToVisibiltyConverter : IValueConverter
public object Convert(object value, Type targetType, object parameter, CultureInfo culture)
if (String.IsNullOrEmpty((string)value))
return Visibility.Collapsed;
else
return Visibility.Visible;
public object ConvertBack(object value, Type targetType, object parameter, CultureInfo culture)
throw new NotImplementedException();

Normally, these errors do go away when you rebuild. Does this stop you from compiling the solution? or are you talking about the squiggly line in the XAML browser?
If so try this
Converter Does not exist in XAML
Another thing that you might have to ensure is the target platform is set to 32 bit.
Regards, Dinesh
thanks, but still getting the error.
I download WPF sample apps and get the same error.
http://www.wpf-tutorial.com/data-binding/value-conversion-with-ivalueconverter/

Object instance 1200 does not exist (while executing task SWUS)

hello all,
i have created a workflow class and two methods (constructor, display) and 1 attribute PLANT (instance,public) in it.
i am using this class and display method in task t code PFTC.
While executing this task from SWUS , i am getting this error.Object instance 1000 does not exist.
As i was going through this blog. i have created everything exactly just like it is mentioned there.
But still i am getting this error. please guide me to detect where i am mistaken.
http://scn.sap.com/community/bpm/business-workflow/blog/2006/07/25/using-abap-oo-methods-in-workflow-tasks
this is class screen-shot and error i am facing while executing the task.
The methods which are implemented using the interface are emtpy(don't contain any source code lines).

sorry i forgot to mention that input value 1000 does exist in our system.
i have also tried F4 help. it is showing all existing plants in our system, but still it is not accepting values select from f4 help.
Also to add information,
I have executed class using F8 option in class builder, and it is working perfect.
source code of display method.(i am trying to view plant in display method just like in blog).
method DISPLAY.
break-point.
   data: ls_vt001w type v_t001w.
   CLEAR ls_vT001W.
   ls_VT001W-MANDT = SY-MANDT.
   ls_VT001W-WERKS = me->PLANT.
   CALL FUNCTION 'VIEW_MAINTENANCE_SINGLE_ENTRY'
     EXPORTING
       ACTION    = 'SHOW'
       VIEW_NAME = 'V_T001W'
     CHANGING
       ENTRY     = ls_vT001W.
endmethod.

ORA-34492: Analytic workspace object cubename _STORED does not exist.

I am having issues accessing cube data from a user other than where the AW was built.
Following is what I have done in User-1:
1. Create two AW's in User-1 : AW-1 and AW-2.
2. Create all objects in these two AW's
3. AW-2 is dynamically attached on attaching AW-1 by using PERMIT startup programs. Please refer Attaching multiple AW's
4. Refreshed both AW's to load data
5. ALLCOMPILE - no errors.
6. Created some SQL views on User-1 which basically query the underlying cube views. I also have some queries using the olap_table option.
7. All my querries work fine in User-1. I can access data from AW-1 and AW-2.
However, we give access to the above SQL views through an abstract user: User-abs. In 10g, all we did was grant select privs to all the User-1.AW$ tables and also on all the sql views. This would let User-abs get data from the cubes in User-1.
I am not able to get User-abs to do the same in 11g. We encounter an error mentioning that the workspace object <cubename>_STORED does not exist. The cubename it is referring to exists in AW-2.
I granted select privs on all AW$ tables, dimension views, cube views and the abstracted sql views but the error persists.
I tried searching this forum but could not find any helpful leads. Any help will be greatly appreciated.
Thanks!
Database - 11.2.0.1
AWM - 11.2.0.2.0A

I can think of two possible problems. First, you may not be properly qualifying the owner name when you refer to the object. This can be important when refering to objects owned by other schemas. For example instead of 'my_cube_stored' you would say 'user-1.aw-2!my_cube_stored'. You should also be careful about the order in which you attach the AWs. Do you want AW-2 attached first or last? Use the LAST keyword on AW ATTACH to control this.
Another possibility is that you have added additional logic to PERMIT_READ over and above the 'aw attach' comand. I was able to recreate the error with the following code in a new AW called TEST_AW in the GLOBAL schema.
DEFINE PERMIT_READ PROGRAM BOOLEAN
PROGRAM
aw attach global.global
show global.global!units_cube_stored
return true
ENDAttaching TEST_AW in RO mode as any user gives me the following error.
ORA-34492: Analytic workspace object GLOBAL.GLOBAL!UNITS_CUBE_STORED does not
exist.
ORA-06512: at "SYS.DBMS_AW", line 93
ORA-06512: at "SYS.DBMS_AW", line 122
ORA-06512: at line 1Here is the documentation for PERMIT_READ
>
PERMIT_READ
A PERMIT_READ program is a program that you can create and that Oracle OLAP checks for by name when an AW ATTACH read-only command executes. Depending on the value returned by the program, Oracle OLAP executes the code within the program after attaching the analytic workspace. Depending on the statements in the permit_read program the user is granted or denied access to specific objects or sets of object values. Within permit_read program, you can specify PERMIT commands that grant or restrict access to individual workspace objects. All of the objects referred to in a given permit_read must exist in the same analytic workspace.
>
Note, especially, the restriction in the last sentence. This means that a PERMIT_READ program in AW1, for example, cannot refer to objects in AW2. So this is why my PERMIT_READ doesn't work. The AUTOGO does not have these restrictions, but as we know from the forum post you cited, AUTOGO is broken in 11.2.0.1. You can move forward to 11.2.0.2 where AUTOGO is fixed, but there is workaround, which is to add a PERMIT_READ program to the second AW to do the work. For example, if I add this PERMIT_READ to GLOBAL and remove the 'show' command from the PERMIT_READ in TEST_AW, then everything works as expected.
DEFINE PERMIT_READ PROGRAM BOOLEAN
PROGRAM
if aw(attached 'test_aw')
then do
show global.global!units_cube_stored
doend
return true
END

Implementation class ZCL_*****************does not exist

Hi ,
I implemented BADI - ME_PROCESS_PO_CUST ,tested in development system,worked well.
When I moved it to Test system I am geting the below error.Is there any thing I need to do while transporting the implementation..
Implementation class ZCL_IM_ME_PROCESS does not exist
Message no. ENHANCEMENT363.
Can any body temm me what sould I do now.
Regards
Rammohan.

Hi,
Are you sure the you have transported the class ZCL_IM_ME_PROCESS ?
Check in SE24 --> Goto --> Object Directory entry --> Lock overview.
May be the class was saved in a different request and you did not transport it
Regards

Bursting Problem - A file or directory in the path name does not exist

I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
[042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
at PIreportburst.bEngine(PIreportburst.java:24)
at PIreportburst.main(PIreportburst.java:51)
-Below is the java code I'm using
public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
try {
DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
dp.process();
catch (Exception e) {
System.out.println(e);
}

Thanks Ike
Where do you suggest setting the temp directory:
DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
or in the xdo.cfg:
<property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
..and thanks for the link to the BIPublisherIDE
Cheers, Mike

The name '' does not exist in the current context

I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
has also happened during normal debbuging of running code on my machine.
I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
My Settings/Configuration
Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
Projects are all set to Target Framework = .NET 4.5.1
Resharper 9.1 is installed
My active configuration is debug mode, Any CPU
My PC is 64bit and so is the O/S windows 8.1
All of my projects are also compiled and built in debug mode
For all my projects configuration debug has the Optimize Code check box unchecked
I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue.
What I have tried so far
I have tried debugging the unit test from Visual Studio Test Explorer instead of from Resharper with the same result.
If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
I clean solution with rebuild has no effect
Removing properties of the array also seems to work, example remove all initialization of property Value
Mark as answer or vote as helpful if you find it useful | Igor

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

/etc/oratab (a file or directory in the path name does not exists)

Hello All,
I ma trying to create a database oracle 11g R2 on AIX 6.1.
But i am facing the below error at the beginning of the installation:
/etc/oratab (a file or directory in the path name does not exists)
Your help pls..

When I am trying to run root.sh. it gives the below error:
IST76SIT:/apps/oracle/oracle11/app/product/11.2.0/db1> ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle11
ORACLE_HOME= /apps/oracle/oracle11/app/product/11.2.0/db1
Enter the full pathname of the local bin directory: [usr/local/bin]: /usr/local/bin
Creating /usr/local/bin directory...
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
./root.sh[14]: /apps/oracle/oracle11/app/product/11.2.0/db1/rdbms/install/rootadd_rdbms.sh: not found.
./root.sh[16]: /apps/oracle/oracle11/app/product/11.2.0/db1/rdbms/install/rootadd_filemap.sh: not found.
IST76SIT:/apps/oracle/oracle11/app/product/11.2.0/db1>

DNS cache " Name Does not Exist"

Hey Guys,
So we've been experiencing a really weird issue related to the DNS for past couple of months. Here are the details:
1) Our domain machines are Windows 7 Enterprise and their DNS points to Windows DNS Servers
2) For companyxyz.net internal sites, the Windows DNS resolves those from its
companyxyz.net zone.
3) For public *.companyxyz.com records, the Windows DNS has conditional forwarders to point these requests to our Linux Bind Servers. And than the authoritative name servers respond to these queries accordingly
4) Our internal employees use the public records such as testing.companyxyz.com
Problems:
1) Employees on the internal network would randomly experience page not found on their browsers while trying to hit
testing.companyxyz.com. When we try to ping this URL, ping would fail too. However, NSLOOKUP would work perfectly fine and return the correct results. ipconfig /flushdns fixes the issue right away
2) During the time when this problem is occurring, if I look into the local cache ( ipconfig /displaydns), I find an entry saying:
testing.companyxyz.com
Name does not exist.
ipconfig /flushdns obviously clears out this record along with the other local cached records and fixes the issue.
3) Point the local computers directly to the Linux Bind servers as DNS never create this issue. It's only when they are pointing to the Windows DNS and going to this public record. The problem also seems to occur a lot more frequently if there are considerably
high number of hits to this URL.
Have you guys experienced this issue before? I am looking for a fix for this issue and not having the end-users to flush their dns constantly. Also note this problem occurs sometimes once a day, or 2 -3 times a week. It's very random.
Thanks.
Bilal

Hi,
It seems that the issue is related to your Windows 7 client. Considering whether there is DNS attack or virus on this computer.
Please try to do the safety scan first.
Please monitor the DNS server performance referring these article:
Monitoring DNS server performance
http://technet.microsoft.com/en-us/library/cc778608(WS.10).aspx
Monitoring and Troubleshooting DNS
http://www.tech-faq.com/monitoring-and-troubleshooting-dns.html
For further step, we need to capture the traffic by using Network monitor when the issue happened and we continuously ping
testing.companyxyz.com.
Microsoft Network Monitor 3.4
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Let’s see whether there is DNS request happened and the DNS request is handled.
You can post back the save traffic log here for our further research.
Kate Li
TechNet Community Support

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

Error: The specified mailbox database [Mailbox Database Name] does not exist, when you try to export mailbox in Exchange 2007

[Symptom]
======================
In Exchange 2007, when you want to export mailbox to a .pst file, you should run the
Export-Mailbox cmdlet from a 32-bit computer that has the following installed:
The 32-bit version of the Exchange management tools
Microsoft Office Outlook 2003 SP2 or later versions
If not, you may encounter the following error message:
You check that you have these required installed, but you get the error below when you run Export-Mailbox in EMS.
“The specified mailbox database [Mailbox Database Name] does not exist.”
[Cause Analysis]
=======================================
This is because that the account you use to run Export-Mailbox cmdlet don’t have the Exchange Server Administrator role assigned.
You can check if this account has been delegated the Exchange Server Administrator role through the following path.
EMC -> Organization Configuration-> Check permissions in the result pane.
To delegate this Exchange Server Administrator role, right click on the
Organization Configuration node and choose Add Exchange Administrator,
you will see the Add Exchange Administrator window.
[More Information]
==============================
Export-Mailbox
http://technet.microsoft.com/en-gb/library/aa998579(v=exchg.80).aspx
How to Export and Import mailboxes to PST files in Exchange 2007 SP1
http://blogs.technet.com/b/exchange/archive/2007/04/13/3401913.aspx
Exchange 2007 cannot export pst files via its powershell
http://social.technet.microsoft.com/Forums/forefront/en-US/b3bc0dce-35f3-4a69-9a33-4f2a855b9f94/exchange-2007-cannot-export-pst-files-via-its-powershell?forum=exchangesvrgenerallegacy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Based on my test, if you make the user the owner of the database (rather than a user with the db_owner role), when you create a query, it creates it under the dbo schema rather than DOMAIN\username.
Steps to do so (in Management Studio):
Right click database, select Properties
Click File
Change Owner in the textbox
OK to confirm
Downside - other users under db_owner role will still have their username appended. So schemas have to be created for these users.
Jaynet Zhang
TechNet Community Support

ORA-22160: element at index name does not exist

hi
i have a procedure which insert values from a VARRAY type in a table. My question is how can i verify the existence of nth element before inserting to avoid ORA-22160: element at index name does not exist
Here is my code:
CREATE OR REPLACE PACKAGE BODY CANDIDE.PE_CL IS
PROCEDURE p_proc(Id_clt IN P_CLIENT.id_client%TYPE,
nameClt IN P_CLIENT.nameclient%TYPE,
--VARRAY type
priceItem IN price_array,
--VARRAY type
nameItem IN item_array) IS
BEGIN
INSERT INTO P_CLIENT VALUES (Id_clt, nameClt);
FORALL i IN nameItem.FIRST .. nameItem.LAST
INSERT INTO P_ITEMS VALUES (Id_clt, nameItem(i), priceItem(i));
END;
end PE_CL;
Product version: Oracle9i Enterprise Edition Release 9.2.0.1.0
Peter

I see the problem now. If there are more values in one varray or the other, how do you want to handle it? Below I have demonstrated, first the solution that I previous offered, that would only insert the rows where there are values from both varrays. In the second example below, I have inserted a null value in place of the missing value from the varray that has fewer values.
scott@ORA92> CREATE TABLE p_client
2    (id_client NUMBER,
3      nameclient VARCHAR2(15))
4 /
Table created.
scott@ORA92> CREATE TABLE p_items
2    (id_client NUMBER,
3      name_item VARCHAR2(10),
4      price_item NUMBER)
5 /
Table created.
scott@ORA92> CREATE OR REPLACE PACKAGE PE_CL
2 IS
3    TYPE item_array IS ARRAY(10) OF VARCHAR2(10);
4    TYPE price_array IS ARRAY(10) OF number;
5    PROCEDURE p_proc
6       (Id_clt    IN P_CLIENT.id_client%TYPE,
7        nameClt   IN P_CLIENT.nameclient%TYPE,
8        priceItem IN price_array,
9        nameItem IN item_array);
10 end PE_CL;
11 /
Package created.
scott@ORA92> show errors
No errors.
-- first method:
scott@ORA92> CREATE OR REPLACE PACKAGE BODY PE_CL
2 IS
3    PROCEDURE p_proc
4       (Id_clt    IN P_CLIENT.id_client%TYPE,
5        nameClt   IN P_CLIENT.nameclient%TYPE,
6        priceItem IN price_array,
7        nameItem IN item_array)
8    IS
9    BEGIN
10       INSERT INTO P_CLIENT VALUES (Id_clt, nameClt);
11 --    FORALL i IN nameItem.FIRST .. nameItem.LAST
12 --      INSERT INTO P_ITEMS VALUES (Id_clt, nameItem(i), priceItem(i));
13       FOR i IN nameItem.FIRST .. nameItem.LAST LOOP
14         IF nameItem.EXISTS(i) AND priceItem.EXISTS(i) THEN
15           INSERT INTO P_ITEMS VALUES (Id_clt, nameItem(i), priceItem(i));
16         END IF;
17       END LOOP;
18    END;
19 end PE_CL;
20 /
Package body created.
scott@ORA92> show errors
No errors.
scott@ORA92> declare
2    priceitem pe_cl.price_array := pe_cl.price_array(2, 5);
3    nameitem pe_cl.item_array := pe_cl.item_array('item a', 'item b', 'item c');
4 begin
5    pe_cl.p_proc
6       (id_clt    => 900,
7        nameclt   => 'MIKE',
8        priceitem => priceitem,
9        nameitem => nameitem);
10    COMMIT;
11 end;
12 /
PL/SQL procedure successfully completed.
scott@ORA92> SELECT * FROM p_client
2 /
ID_CLIENT NAMECLIENT
       900 MIKE
scott@ORA92> SELECT * FROM p_items
2 /
ID_CLIENT NAME_ITEM PRICE_ITEM
       900 item a              2
       900 item b              5
scott@ORA92> TRUNCATE TABLE p_client
2 /
Table truncated.
scott@ORA92> TRUNCATE TABLE p_items
2 /
Table truncated.
-- second method:
scott@ORA92> CREATE OR REPLACE PACKAGE BODY PE_CL
2 IS
3    PROCEDURE p_proc
4       (Id_clt    IN P_CLIENT.id_client%TYPE,
5        nameClt   IN P_CLIENT.nameclient%TYPE,
6        priceItem IN price_array,
7        nameItem IN item_array)
8    IS
9    BEGIN
10       INSERT INTO P_CLIENT VALUES (Id_clt, nameClt);
11 --    FORALL i IN nameItem.FIRST .. nameItem.LAST
12 --      INSERT INTO P_ITEMS VALUES (Id_clt, nameItem(i), priceItem(i));
13       FOR i IN nameItem.FIRST .. nameItem.LAST LOOP
14         IF nameItem.EXISTS(i) AND priceItem.EXISTS(i) THEN
15           INSERT INTO P_ITEMS VALUES (Id_clt, nameItem(i), priceItem(i));
16         ELSIF nameItem.EXISTS(i) THEN
17           INSERT INTO P_ITEMS VALUES (Id_clt, nameItem(i), null);
18         ELSIF priceItem.EXISTS(i) THEN
19           INSERT INTO P_ITEMS VALUES (Id_clt, null, priceItem(i));
20         END IF;
21       END LOOP;
22    END;
23 end PE_CL;
24 /
Package body created.
scott@ORA92> show errors
No errors.
scott@ORA92> declare
2    priceitem pe_cl.price_array := pe_cl.price_array(2, 5);
3    nameitem pe_cl.item_array := pe_cl.item_array('item a', 'item b', 'item c');
4 begin
5    pe_cl.p_proc
6       (id_clt    => 900,
7        nameclt   => 'MIKE',
8        priceitem => priceitem,
9        nameitem => nameitem);
10    COMMIT;
11 end;
12 /
PL/SQL procedure successfully completed.
scott@ORA92> SELECT * FROM p_client
2 /
ID_CLIENT NAMECLIENT
       900 MIKE
scott@ORA92> SELECT * FROM p_items
2 /
ID_CLIENT NAME_ITEM PRICE_ITEM
       900 item a              2
       900 item b              5
       900 item c

Name Error: The domain name does not exist

Hi,
I get this error when I try to create a view inside a web dynpro from se80 transaction
" Name Error: The domain name does not exist. "
Can anyone help me to solve this error ?
Thanks !!

Hi,
did you carry out the necessary <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">configuration</a> in your system? Note especially the need for fully qualified domain names (FQDN): <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm">FQDN</a>
Regards, Heidi

Source system 8(ODS name) does not exist

Hi experts!
When I transport some Process Chane from DEV to PRD I faced with issue that the source system 8(ODS name) does not exist.
Is anyone faced with same error?
Thx!

Hi.......
Look.......
U cannot Transport it........First Right click on the Infoprovider in PRD >> Export Datasource...........then replicate it from bw myself........
U hav to generate it in Production also.............hav u done this before replication.....?
Regards,
Debjani....

Post Goods Issue - error : Class type does not exist - Message no. VK662

Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-Sri

Sri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps.

Object class name does not exist in IDM

Similar Messages

Maybe you are looking for