Clean install using a new startup disc

I'd like to do a clean install of SL on my Mac Pro. What I'd like to do is install it on a second empty internal drive while keeping the original boot drive (10.5) intact. This way I can continue to use the original boot drive, while I am rebuilding the new boot drive. As it is, I have the system user data (email & library) on one disc, and I have all my documents on 2 separate drives. And then I have the 4th empty drive I'd like to do the clean install. So my questions:
Will things get wacky switching between the 2 boot drives?
How do I move over my user files (email, keychain, a few preference files, bookmarks etc)? I don't really want to use the migration assistant to move everything over - this is where I brought over some existing corruptions from my last computer. I'd rather install things clean, and then just selectively bring over important user data.

Hi funkie;
Much of the data gets upgraded with Snow Leopard such as the iPhoto database, so as you say things can get wacky switching back and forth between boot drives.
Allan

Similar Messages

  • How do I download LION and do a clean install on a new disk?

    I have a brand new HD which has not yet been formatted.  I would like to download Lion and instead of updating my Snow Leopard OS disk I would like to do a clean install on this new drive.
    Do I first do a journaled format on the new drive...?  And if so how do I download LION from the APP store and pointn the install at the new target drive?

    How to Install Lion Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important - Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase and Download Lion from the App Store.
    E. If you want to make a bootable USB flash drive:
    Make Your Own Lion Installer
    1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the InstallESD.dmg disc image file into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable Lion installer that  you can use without having to re-download Lion. You can also use it to erase your hard drive and do a clean Lion installation.

  • I'm about to upgrade to Lion on my Mac soon and would like to make a backup of all my bookmarks, passwords and other settings in firefox to be able to make a clean install of the new OS, how do I do that?

    Well, Ihave a lot of passwords for different sites that Firefox keep track of so that I don't have to remember them all when I need to log in on these webpages. Also I have a lot of bookmarks. How do I make a backup of all of this data so that I can make a clean install of the new Lion, install Firefox 5 and then use this backup to return Firefox to the same level as before? Also, I want to be able to have a backup file of all this in case of a crash. Is this possible, and if not maybe a function for the future?

    http://support.mozilla.com/en-US/kb/Backing+up+your+information

  • How to do clean install lion on new macbook pro?

    I have a new macbook pro...I want to do a clean install on a new hard drive...but when I goto the app store it shows lion app available but it's not free?  Do I need to buy this when i just purchased the Mac? 
    Confused about how that works...in the "old" days I just put the DVD in...
    Thanks!

    I have a new macbook pro...I want to do a clean install on a new hard drive...but when I goto the app store it shows lion app available but it's not free?  Do I need to buy this when i just purchased the Mac? 
    Confused about how that works...in the "old" days I just put the DVD in...
    Thanks!

  • I've emptied trash, removed files, discarded everything I don't use and my startup disc is still full.  Half of it is 'other'.  How do I find out what 'other' is and remove it?

    I've emptied trash, removed files, discarded everything I don't use and my startup disc is still full.  Half of it is 'other'.  How do I find out what 'other' is and remove it?  I'm using a Mac OS X Lion 10.7.5 (11G63).  Any help will be treasured!

    Linda Steider wrote:
    How do I find out what 'other' is and remove it?
    See Pondiini's The Storage Display, for details.

  • Clean Install Yosemite onto new SSD (Also, what is TRIM?)

    Hi,
    I've been researching how to replace the Hard Drive on my Late 2011 13inch Macbook Pro (MacBookPro8,1 / 2.4 GHz / Intel Core i5 / SATA III) with a new SSD (maybe a Samsung 840 EVO) and clean install Yosemite onto it. I've found a few ways to do this on the support forums and the macrumors forum, but I want to confirm if I can do it this way:
    1. Plug new SSD into the Macbook via a USB cable
    2. Download Yosemite onto current Macbook Hard Drive. When I'm prompted to install, chose the new SSD from the list. Complete Installation.
    3. Remove old Hard Drive from Macbook and plug new SSD in it's place (and not in the optical bay).
    Would this work? I have another external hard drive with all of my documents, pictures and music on which I'm just going to manually remove over, and have no problem doing. I can also download the iLife programs directly from the App Store so I wouldn't be missing out on those either (I do have the iLife '09 discs too). I've also read about creating a bootable USB using DiskMaker X, but I feel the route I outlined would be easier.
    Am I missing anything? I do have the EFI Firmware v2.7, so the problems the 2011 MacBooks were having with SATA shouldn't be an issue during this. Also, during my research, I found a references to something called TRIM. Can someone explain TRIM to me?
    Thanks,
    Steve

    Thanks for the response and confirming I can clean install Yosemite onto a new SSD using the process I listed in my initial post.
    I have a 13'' MacBook Pro with Yosemite already installed onto it so my graphics card should be set. After almost a month of using it, I haven't noticed any issues on that end.
    I guess this TRIM thing is a totally separate subject from this thread. I read Apple is no longer supporting third-party SSD for TRIM support. If you turn it on, but keep a security feature on, you risk your computer not booting correctly. It looks like the only way to have TRIM enabled on a SSD using Yosemite is to have an Apple supplied SSD, or an SSD that can trick Yosemite into thinking it's Apple supplied (like the Angelbird Wrk for Mac SSD).
    I've also done a good amount of research that TRIM is only necessary if you're saving a lot of items to the hard drive in one sitting (like photoshop). I primarily use my Mac for Pages (which saves my documents into the cloud now), iTunes and Safari. I guess this would fit me into the "casual user' criteria? I've also read that if you don't use TRIM, your SSD uses "Garbage Collection" (which actually sounds terrible) to keep the SSD informed on what data can be overwritten since it's been deleted by the user. I read that most modern SSD hard drives have a pretty decent Garbage Collection function, so if you leave your computer idle, keep "Put the hard disk(s) to sleep when possible" unchecked, the SSD will run Garbage Collection on it's own and that should be sufficient enough to keep the SSD in good working order.

  • IMac OS 8.5 Boot Issues - Install/Format HD/Select Startup Disc?

    Hello,
    I have a used iMac that had OS 8.5 installed. When I first booted, it appeared there was no OS installed (flashing icon - folder with "?" and Folder with OS icon). Attempted to install OS 8.5, but get the same error after reboot.
    Tried to use 'Initialize Disk' to reformat the hard drive, then installed OS 8.5. Same error on reboot. Have tried using the Startup Disk (?) option to select the hard drive, but there appears to be no option save to click.
    I don't know about Mac and Master Boot Records or if there is a Mac CMOS. Any ideas on what I am doing wrong?
    Thanks,
    Dave
    iMac G3   Mac OS 8.6 or Earlier  

    Just might be a hardware issue. Here is what I tried this morning:
    Reblessed system, booting from install CD.
    System Error on reboot - address
    * Occasionally on this error, the system will not reboot then the "reboot" button is pressed. Power button non-responsive. Have to shut down the old fashioned way - yank the power cord.
    Startup from Install CD with no extentions.
    Initiated HD, 1 partition, Mac Standard.
    Rebooted system.
    Began Installation with "recommended installation" for all items.
    Reboot - same flashing icon.
    Boot from install CD, address error.
    Reboot with no extentions.
    Erased HD (Selected HD Icon | Special -> Erase Disc)
    Reboot with install CD
    Ran Disk First Aid on HD - checked out fine.
    Initialized with 2 partitions:
    - 3GB MacOS Standard
    - 3GB MacOS Extended
    Ran disk First Aid - no problems.
    * On a lark, I ran Disk First Aid on the Install CD and got the following:
    Problem: Custom icon is missing,452,328
    Problem: Custom icon is missing,453,327
    Volume iMac Install needs to be repaired.
    Began Installation again anyway...
    Selected Clean Install from Select Destinations | Options
    Recommended install.
    Reboot. Address error. Same problem...
    iMac G3 Mac OS 8.6 or Earlier
    iMac G3 Mac OS 8.6 or Earlier

  • Need to do a clean install on my new iMac

    I have a new iMac and after migrating everything from my old one, I am getting some strange problems.  Things like not being able to shut down without doing a forced shut down and some other small things here and there that Apple have not been able to figure out.  I thought I should do a clean install instaed of a full migration and I wonder if anyone has any tips on doing this in the most efficient way, while migrating all my data and info and such, but making sure that I don't just bring back the same problems.  I have everything on a Time Machine back up.

    CDs are no longer required, in fact no OS X version has been available on optical media for three versions now.
    To erase the disk or to reinstall OS X use OS X Recovery: Hold ⌘ and r (two fingers) while you start your Mac. Your iMac has a Recovery partition already on the disk, and if you need to replace that disk with an empty one, your iMac has firmware that conveys the ability to download OS X directly from Apple's servers, and create a new Recovery partition on the new disk.
    For a more thorough description addressing all options start with the following, courtesy of the late Apple Support Communities contributor Pondini: 19. I got a new Mac, or a new or erased internal HD -- now what?
    Beware of any incompatible software that Migration Assistant may transfer from Macs running earlier OS X versions.
    Anything you purchased from the Mac App Store or the iTunes Store can be downloaded and installed again on as many Macs as you own, as often as required, assuming the purchased items remain available from their respective stores.

  • How to create a new startup-disc?

    Hello folks!
    I'm working with Leopard (10.5.2) and have a new GeForce 8800Gt installed. Because of this my Leopard-installation disk does not work any more. For the 8800GT one has to use 10.5.2 and on the installation-disk is only 10.5! Another reason is that there must be the graphics update installed. So now I can't use my disk repair software "from outside" also my DiskWarrior startup-CD does not work anymore - for the same reason.
    Has anybody got an idea how I can create a new StartUp disk with Leopard 10.5.2 on it? So I could put my DiskWarrior on this CD and repair my start-volume, if necessary?! Any help is extremely welcome!
    Jones

    Making a bootable DVD or CD is not a trivial task. There was a utility for Panther (10.3) called BootCD that allowed one to easily do this, but it has never worked for any later OS X.
    To do it for Leopard is going to need some pretty high-level programming skills. Im pretty sure it's beyond a simple "how-to" guide that one might expect to be able to find online.
    Stick with the bootable external drive.

  • Clean install Mavericks on new hard drive

    Hello,
    I have a Early 2009 Mac Pro that is currently running Mavericks (10.9.1). There are currently three hard drives in it:
    2-1 TB Hitachi HDE721010SLA330 (1 as Boot drive & 1 as secondary storage, both from factory)
    1-3 TB Seagate ST3000DM001-1CH16 (being used as a Time Machine Drive)
    I want to replace the boot 1 TB drive with a second 3 TB Seagate ST3000DM001. I understand the process for clean installing Mavericks. I know that I'll have to reinstall all my apps and such. Will the cleanly installed Mavericks on the new drive be able to recognize the 2nd 1 TB storage drive as-is? Also, will Time Machine restore my iMovie projects back in place as they are now? And also, not exactly a huge issue if it would arise, but would my VirtualBox VMs be restored to where they are (I know I'll have to re-add them back into VB, that's not a big deal.
    I just want to do this as "cleanly" as possible (even though though i know that probably won't be the case, never is with computers).
    If I need to provide any more information I would be glad to. Thank you for any help in advance!

    Make A Bootable OS X Mavericks USB Install Drive With DiskMaker X
    Monday, December 23rd, 2013 | Author: OWC Jarrod and OWC Joseph 
    Last week, Apple released its Mavericks update with the 10.9.1 version of the operating system – which we hope fixes a few bugs that we saw in the first iteration released Oct. 22.
    And if the latest update has you finally looking to upgrade your Mac to the new version of the operating system, it’s worth noting that like its predecessors – beginning with OS X 10.7 – Mavericks is only available for install via download from the Mac App Store.
    This means those who previously relied on DVD installs will be unable to do so with this version. Luckily, DiskMaker X helps fill the void by allowing you to make a bootable OS X 10.9 Mavericks USB install drive.
    What’s really great about this software is like OS X Mavericks, the DiskMaker X software won’t cost you a thing (however, donations are accepted). All you need is an 8 GB (minimum) USB thumb drive, a USB, FireWire, or Thunderbolt drive or an SD-Card, the OS X 10.9 Mavericks Installer from the App Store, and the DiskMaker X application.
    DiskMaker X is fairly straightforward and will guide you through the process of making your install drive. It should be noted that DiskMaker X erases the volume or the drive you chose, according to the options you chose. So don’t forget to backup your data first! 
    http://blog.macsales.com/21911-make-a-bootable-os-x-mavericks-usb-install-drive- with-diskmaker-x?APC=XLR8YourMac13

  • Thinkpad Yoga - Clean install with Win 8.1 disc and embedded product key

    Hello everyone,
    I purchased a Thinkpad Yoga that comes along with Win 8.1 and embedded product key.
    Will it be possible to plug-in an external drive and install Win 8.1 from a Win 8.1-disc? BUT I don’t want to use the key that comes with the disc, but the key embedded in the bios.
    This is my girlfriends Windows 8.1 disc and license. Nevertheless I could use it for the clean install.
    But I'm not sure, if the original key from my Yoga will work then.
    Thanks
    Hutson

    I guy on Youtube made a rough tutorial.
    http://www.youtube.com/watch?v=lI8AnNBIlLQ
    Englisch subtitles available
    In the comments he suggests, to download the Iso with anouther win-8.1-key - no matter which one - and to install the system clean. In his opinion the system will get the key from the hardware. He is writing, that there is just a universal iso. So it's no problem to download an iso with another key, even if your system is a Home-Edition and you download it with a Pro-Key.
    I will try this.
    Hutson

  • Mac Mini - Disc Warrior - Will not respond to new startup Disc

    Problem:
    I ran disc warrior and rebuilt and replaced the directory simply as maint and to deal with a few crash issues. After quitting Disc Warrior I held the option key (on a new low profile Apple Keyboard - wired) to open startup disc assistant. Computer continues to boot from the disc. I cannot find a single way to change the startup disc from within Disc Warrior either.
    I then determined that there is no power going to the keyboard until after the time period needed when holding the option key or even trying to use the firmware keyboard shortcut. I determined this by pressing the caps lock key. The green light on the caps lock does not come on until well after the initial startup sound.
    Is there a way to open terminal when the computer is booted from a disc? Is there a way around this? I've tried unplugging every peripheral except the keyboard and the power issue still persists.
    No matter what I do, the computer still boots from the disc. I tried opening system prefs from the apple menu but it is grayed out.
    Any help would be great. Thanks

    Unfortunately, this seems to be an issue with the new aluminum keyboards: they do not seem to allow you to access the Startup Manager. Do you have a wired mouse? If so, you could plug it directly to the Mini (just to be safe), start the Mini, press and hold the mouse button right after the startup chime until the CD ejects. The Mini should then boot to Mac OS X.
    If you have an Intel Mini, it may be even easier: pressing and holding your Apple Remote's "menu" button right after the startup chime should have the same effect as using the Option key on a keyboard.

  • Mac Pro won't clean install OSX on new HDD

    I have a Mac Pro early 2008 and I was running windows and mac on 2 separate hard drives. I was using the 500gb WD hdd that came with the mac that had mac installed and I just upgraded to mavericks, and I was also using a new WD 1TB hdd for Windows (http://www.amazon.com/gp/aw/d/B0088PUEPK/ref=mp_s_a_1_1?qid=1394048774&sr=8-1). I was using windows more because I was having trouble switching back and forth and sometimes the mac hdd wouldn't show up. I tried a few different things with the harddrive and I just came to the conclusion that the mac hdd was dead. It was the original hdd that came with the Mac Pro so it was pretty old I figured it just died, it wouldn't show up anywhere. Anyways, I bought. 2TB WD hdd (http://www.amazon.com/gp/aw/d/B008YAHW6I) to use for mac and now when I tried to install it with the retail mac snow leopard install disk from apple, it gets to the grey apple logo with the loading circle and just stays there forever. I've left it on for a while and it still stays there, which is the same thing that happened when I tired to reinstall it to the old mac harddrive that I think is dead. I've started up into boot option and the new hdd doesn't show up, idk if it's supposed to show up being that's it's a new hdd or what. So I'm not sure if the hard drive is incompatible or the installer disc is incompatible with this Mac Pro. Or the 2tb is too big, I've heard people run up to 3tb on one hard drive on mac pros and they still run good. So I'm not sure, if anybody could please help I'm sure it's probably something simple. Links to the harddrives I have are above. Thanks a lot !

      No 2TB is not too big, though it is overly large for a boot drive.
    A 128 or 250GB SSD is just about perfect for system boot drive - for either system.
    Cloning for backup is the best type of insurance against issues. Two probably, one you can have a copy of the working sytem, one older safe copy. And use those to repair.
    you might have been able to clone it. You might be able to mount it and use Data Rescue 3.
    A "recovery drive" and two backup drives: TimeMachine and clone.
    System drive and "data" drive for all the media and data and other non system files, all YOUR user folders and files.
    Did you change out the video card? that could be one reason why. Apple's ATI 5770 requires 10.6.5+ - beyond the build of the retail Snow Leopard.
    You could try buying Mountain Lion too.
    With good backup clones then rare to ever need to redo and install the system. But it is good to start fresh when you have a new OS, and to format any drive at that time, and probably on a yearly basis - and not just keep using same drive for system, or for data.
    I would think that without proper maintenance and use of Disk Utility: Repair Disk, you just had simple directory corruption issues.
    How to Clone a Volume
    Using Cloning as a Backup Strategy 
    See also Erasing a Drive, How and Why to Partition a Drive, RAID.
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://macperformanceguide.com/Mac-HowToClone.html

  • ITunes Treats Clean Install As A New Computer!

    Hi All.
    Okay - I've got two networked computers in my office, both PowerMac G4s running Panther.
    Before I state the problem, I'll concede that I understand that songs purchased on computer A will naturally treat computer B as a separate entity, therefore the license will read "Two computers out of your allowable five have been licensed to play this song."
    That's all understandable.
    However, since I've had to do a clean install of Panther on both computers, iTunes thinks that I'm playing those same songs on two completely different computers and has told me that I am now using FOUR of my allowable five machines!
    This is ridiculous. What happens if I have to do any further installs of OS? Does this mean that I won't be able to play my music because it will keep thinking they're different machines? Please tell me there's a way around this!
    B.

    Problem....Now I have a new computer and I would like the new iTunes program find my music files on the external drive as well as all of the information that goes with it.
    All of the info is in the iTunes library file, which the default location is in \Music\iTunes\ folder on your C: drive.
    If you do not have that. you cannot get the info.

  • Clean Install - use MSI System Drivers?

    I have a question regarding a clean install.
    Install operating system -> MSI Chipset Drivers then update on top using ATI Catalyst 8.4?, Realtek Audio Drivers and finally Realtek PCI-E Lan Drivers.
    What is difference between the MSI Drivers and the Catalyst suite?  They same to be the same:
    Catalyst Control Centre
    ATI Install Manager
    North Bridge Filter Driver
    ATI Display Manager
    IDE Driver
    Microsoft Visual C++
    ATI Unified Stream Driver
    except the MSI Drivers adds Avivo64 Driver
    Also, I thought it was always best to unistall all ATI drivers before upgrading? - at least that is the concensus on the AMD forum.
    Any advice is appreciated.
    Vista x64 Premium
    Antec P182B Case
    MSI K9A2CF BIOS ver 1.5B1
    AMD Phenom 9500
    Thermaltake ToughPower 750w
    ATI Radeon 2900XT
    OCZ PC2-6400 800Mhz 2 x 1024
    Seagate 500GB 16MB cache SATA-2 HD
    Mitsumi 1.44 internal 3.5 floppy / 6 in 1 card reader
    Samsung 206BW

    I guess that's where I'm confused.
    It dosen't appear that the MSI system drivers are any different than the ATI catalyst drivers.  The only difference is that the MSI drivers wanted to install Avivo64 on my system.  Going to the ATI Catalyst site, it offers Avivo64 as a seperate download, but "Avivo Video Converter will only work with X1000 series products."   http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista64/common-vista64  I have a 2900XT.
    The Realtek audio and PCIe Ethernet drivers to install from the MSI site are in this case up to date and make sense.
    So to ask in a different way, is there a problem with:  OS first -> then the ATI Catalyst Suite (system drivers and display driver) - NOT install the MSI system drivers which appear to be outdated and the same as the ATI Catalyst Suite- then the Realtek Audio Driver, and finally the Realtek PCIe Ethernet driver.
    Thanks
    Vista x64 Premium
    Antec P182B Case
    MSI K9A2CF BIOS ver 1.5B1
    AMD Phenom 9500
    Thermaltake ToughPower 750w
    ATI Radeon 2900XT
    OCZ PC2-6400 800Mhz 2 x 1024
    Seagate 500GB 16MB cache SATA-2 HD
    Mitsumi 1.44 internal 3.5 floppy / 6 in 1 card reader
    Samsung 206BW

Maybe you are looking for