Clear error message on F4 standard search help in webdynpro abap
Hi Gurus,
We have a check on the data entered by the user in our webdynpro producing a error message if the data are not correct. My problem is that this message is also diplayed in the search help afterwards when the user clicks on the search help. I know how to clear an error message but I can't find the event triggered by the F4 search help to put my code. The search help is a standard search help and thus I can't modify it.
All I want is to find the event triggered when the user clicks on the search help. The field is in an alv but the alv click or alv action are not triggered when the user clicks on the search help.
Thanks for your help in advance guys.
Yes. It is called a Freely Defined Value Help if you want to have complete control of the UI that is displayed in the dialog:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9ef8cc9b5e3c5ce10000000a421937/frameset.htm
Similar Messages
-
Getting error message in Business Partner search help
Hi Experts,
User is getting an error message while clicking the Search help for business Partner in all the transactions (FPL9, EEDM11, etc.).
Only few users are facing this issue. We have compared the roles of the affected users and unaffected users and the roles are same. What will be the reason for few users getting the error?
Thanks & Regards,
DipinI'm not familiar with EEDM11, but FPL9 has parameter ids that can be set at the user level. Look at
System/User Profile/Own Data, Parameters tab between your two groups of users. Also consider checking the settings in Help/Settings, F4 Help tab.
Lastly, you might try dropping debug on the error popup and see where it is being triggered from. Maybe the answer is there.
Regards,
K-- -
Organizational Structure Search Help in Webdynpro ABAP
Hi,
I need an organizational structure search help in webdynpro abap.
It should list the organizational structure in tree view like RH_OBJID_REQUEST lists.
I tried to use RH_OBJID_REQUEST function in webdynpro but I got " A RAISE statement in the program
"CL_GUI_CUSTOM_CONTAINER=======CP" raised theexception condition "CNTL_ERROR" short dump.
Is there such a function for webdynpro abap and how can I achive this with select options?
Thanks in advance..
MERALGreat article. I also had this probelm a year ago. My problems questions are:
Is it possible to select more then one entry in the tree?
What about selecting all childrens with one click?
In my solution I inserted this tree, into a table and the table had a checkbox, row, so the user can check the required org units, (more then one) and there was a separate button, for "select all children" -
hi all,
I am new to webdynpro abap.i want to implement search help for input feilds in my application,.can anyone give me step by step procedure to create search help
thanx in advance.
regards,
AnushaHi Anusha,
Web Dynpro provides two types of pre-implemented search helps :
1. ABAP Dictionary Search help
2. OVS
[Input Help for WDA|http://help.sap.com/saphelp_nw04s/helpdata/en/b3/4d3642eca5033be10000000a1550b0/frameset.htm]
I have created a blog on implementing OVS help in WDA. You can refer that for sample code.
[OVS help in WDA|/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap]
In addition, you can also provide help through Drop Downs and Select options.
[Working with Select options in WDA|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09fec07-0dab-2a10-dbbe-c9a26bdff03e]
Plz reward if helpful.
Thanks.
Shruti -
Dynamic Search Help in webdynpro abap
Hi,
I have 2 fields in my UI- say Object Type and Object Name. Both the fields are search helps which i have created.
Based on the selection made in the Object Type, the Object Name search help will be populated with values accordingly.
For Ex: Object Type can have values - Program, Project Cluster, etc.
If i select Program, then in my Object Name search help i should get values ERP Package 5.0, Netweaver, etc
and if i select Project Cluster, then in my Object Name search help i should get values HCM, FIN, etc.
How can i do this?
Regards,
Wilma.Hi Ralf.
I checked the test application WDR_TEST_DDIC_SHLP. If it had behaved like the way you explained, then it would perfectly match my requirement.
But in the test application, in the search help for Country, there are no values for the country that i can select and only cities can be selected. The entry that i select in the input help for Country forms the input for the city field.
Kindly check and let me know.
Regards,
Victoria Wilma -
Custom search help in webdynpro ABAP
Hi,
I have a requirement where I have to display a popup with tree ALV on F4 for a field in a webdnpro ABAP application. Is it possible to call a popup on pressing F4 for a field. If yes please let me know how.
Regards
NilanjanYes. It is called a Freely Defined Value Help if you want to have complete control of the UI that is displayed in the dialog:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9ef8cc9b5e3c5ce10000000a421937/frameset.htm -
Clearing error messages in Purchase Order
Hi All,
Can anybody tell me how to clear error messages in user exits when changing the error message?
My problem is like this and using the exit 016.
I want to make sure Plant in all line items are same. If the user changes one Plant, then I am comparing that with other line item plants and giving error message if they are wrong.
Then, instead of changing the line item 10, if user changes Plant for 20, in this situation both plants are same. Hence, should able to save the purchase order.
But it is not able to save the PO because, it is not able to clear the error message on line item 10.
Can somebody suggest, how to clear the error message?
Hope, I made the question clear.
ShyleshHi Friend,
Fire an information message instead of error message.
Because you can not handle error message in user exit / BADi.
Standard way of handling error message in screen by CHAIN ENDCHAIN.
But you do not have control on the table control of PO.
So it is better to fire an information message.
Regards
Krishnendu -
Calling a standard search help from MS Office
One of the companies I work for has integration with Microsoft Office so users can create SAP DMS (document management system for those who aren't familiar with it) entries directly from e.g. Microsoft Word. The integration solution is a custom .Net application.
In addition to the obvious integration to create the DMS info record and assign the document as an original the integration solution lets the user provide classification data. Some changes are now being planned, and one of them is challenging as a new characteristic (for the classification) will be used to store an organization unit. This is straightforward when the user is in the SAP GUI, as the standard search help can easily be displayed from custom code.
Being a technology optimist I was hoping that with the new fancy technologies SAP would have provided a way to use .NET integration to display a standard search help from the MS Office integration dialogue - but so far I have not been able to find any information supporting this hope. Luckily I am not the developer working with the integration dialogue, but unless the mentioned possibility exists it looks like we have to resort to passing all organization units to the interface so a hierarchy can be constructed and displayed to the user for selection.
Another alternative (I think) is to recreate the dialogue as a web dynpro screen, which will give us all the advantages of operating "inside" SAP. However, I am not sure if this is possible either. Can a web dynpro screen be called from an MS Office application (.Net), and can that web dynpro screen return values to the (external) calling application? In my simple view of the world this should be doable, if not otherwise it should at least be possibly by wrapping the screen in a function module that is exposed so the .Net application can call it - either by RFC or as a web service.
Microsoft Office version is 2003.
SAP release is ECC 6.0 (Netweaver 7.0).
I think this is the right forum for my question. My apologies if it isn't (and any guidance towards a more appropriate forum would then be appreciated).Not solvable I suppose. There should be a way to close messages without marking them as answered.
-
To Report Error message in oracle website search option
I have encountered an error message in oracle website search option. There was some compilation error in their JSP pages I did not know how to inform the Otn team. Can any one please guide me.
regards,
sagarYou can use the below information for raising an Alert for adapters.
Specific Error Information from the Adapter Engine:
Container Element
ABAP Dictionary Data Type
Meaning
SXMS_TO_ADAPTER_TYPE
CHAR70
Adapter type
SXMS_TO_ADAPTER_ERRTXT
CHAR70
Error text from the Adapter Engine
Refer the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm -
Getting the value of a dynpro field in an exit for a standard search help.
Hallo Experts!
I need to modify the selected data displayed in standard sap search help: H_T357
What I've done is create an exit for the search help.
Then, when CALLCONTROL-STEP = 'DISP' I use the function module F4UT_PARAMETER_VALUE_GET and I get the value of the parameter 'WERKS' correctly. I think that this function module can only obtain values from the parameters of the search help. Well, here is the problem, I would like to get the values of dynpro fields
'ILOA-STORT' and 'VIQMEL-QMART' (warning type) in transaction IW21.
I prefer not to add these fields as parameters to the standard search help: H_T357.
Any ideas for getting the value of these fields? I've seen functions modules: F4UT_GET_ENVIRONMENT and F4UT_SH_SIC_GET_FIELDS. But I don't know if I can use them for my porpuses.
Thanks a lot in advance.Hello again,
I have already solved the problem using function module 'DYNP_VALUES_READ'.
Thanks, David. -
Standard Search Help in Custom Search Help
I've created a Custom Search Help for Product Hierarchy. But when search help window appears, I want to put a standard search help of Product Hierarchy on Product Hierarchy field which is located on Resctricted section. Is that possible? Let me know if there's a way...
Thank youhello ibnu,
it is not possible i attach a standard search help mara
no such feature available . -
I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?
U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html -
PsCS6 won't open. Error Message 213:19. Need Help.
PsCS6 won't open. Error Message 213:19. Need Help.
HI jacksonthomas,
Were you able to use PS CS6?
If not, please try the solutions on the following page: http://helpx.adobe.com/photoshop-elements/kb/licensing-problem.html
Let us know if you need any further help.
-Pragya -
How to copy a standard search help to another field
Hi All,
I have a BSP screen in that for one input field i need to copy the standard search help for the Business Partner. Could any one guide me how to copy the standard search help for the business partner into the input field in the BSP screen.
Thanks In advance for the help...
Thanks,
SAP SAPHi,
the BP search is its own web client UI component. For the integration you could check any standard transaction UI component like the BT115H_SLSO, as those contain several partner fields.
Best Regards,
Michael -
Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?
Hello,
this topic is still a problem for me, does anybody have an idea.
Just to show what's my problem:
Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
That works, the SH's are not shown anymore.
I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
All this can be done modification free by appends.
The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
But I have not found any way to do this modification free.
The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
But I want avoid this modification.
So, is there any way to do this without modifing any of the original SAP SH's ?
Helmut Fischer
Maybe you are looking for
-
Cannot get progress to show in app store download of Mountain Lion
Having to re-download Mountain Lion on my mid 2009 MBP from overseas. The ML app shows "downloading" in dock with progress bar under it (and just a hint of blue for hours now), but in the App Store on the Purchases tab it just shows the Mountain Lion
-
Why can I no longer copy and paste a whole page in page thumbnail?
Why can I no longer copy and paste a whole page in page thumbnail?
-
Populating users and groups - design considerations/best practice
We are currently running a 4.5 Portal in production. We are doing requirements/design for the 5.0 upgrade. We currently have a stored procedure that assigns users to the appropriate groups based on the domain info and role info from an ERP database a
-
Turning on Full Keyboard Access for PB G4
I'm a new Mac user with a PB G4 15". I've searched the forums for an answer to this to no avail. In The Tao of Mac (http://the.taoofmac.com) the author says: "If you're keyboard-oriented, go into System Preferences | Keyboard and Mouse | Keyboard Pre
-
Aperture Library to Adobe Lightroom?
Hello, Does anyone know of a way, or have any ideas, of how to share my Aperture library with Adobe Lightroom? I like both programs for different reasons and was curious if there was a way to at the very least export my Aperture Library in a way that