Clear FEHLER table in cluster B2

Hello experts,
My client asked me to clear all the old messages before January 2009 in table FEHLER.
Have you any suggestion how to do it without changing pcr's in the schema.
Thanks,
Meir.

Hi Meir,
I've found this message in the forums and I want to know If you've solved this problem. I have the same and I don't know how to solve this, please, if you solved, help me!!!
Thanks in advance,
Regards,
Rebeca

Similar Messages

How can I get data in flat file from Pool table and cluster table ?

Hi,
I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
Is there any tool avilable to download data into flat file from pool table and cluster table ?
if table name given in the selection screen then data will be downloaded into flat file.
waiting for quick response.
Best Regards,
Bansidhar

Data cannot be retrived directly form the cluster table
as the Cluster results are stored in Cluster Key say for example PCLkey
and form that Key we need to fetch the data
these clustes are not the part of PNP or PNPCE tables
for ur info kindly check

How to clear UNB table in the payroll result?

Hi,
We are getting the payroll error- The gross wages do not cover the negative offset that has been forwarded. Therefore, no gross up is permitted while running the Grossup.
I see the below table "UNB table" in the last payroll result. "UNB - Unbalance table used for tax retrocalculation" .
I think we are getting the above error because of this UNB table, can anyone help me to how to clear this table?
When we run the regular payroll, no tax is being deducted.
Please help
Saurabh

Hi Arti,
Thanks for your reply!!..
Seeing your reply, it gives me bit confidence to crack the existing problem, however, I'm still not clear with your answer... let me explain you the problem-
1. Employee was given 350,000 though Taxable Bonus WT with regular pay check
2. Later it came to know- out of the above amount, 75000 was Grossup amount
3. So in next payroll run, they entered -75000/- in regular Taxable bonus WT and +75000 in Grossup WT and also they deleted one IT210 record of GA tax authority which was wrongly created; and ran the payroll
4. Since then, in next payroll period- No tax is being deducted, so we are creating IT221 infotypes with Tax wagetype
5. If we are running the Grossup wage, payroll error- The gross wages do not cover the negative offset that has been forwarded; therefore, no grossup is permitted.
While running the regular payroll, overpayment Wagetype is being generated.
Now, I saw this UNB table is created and the below wagetype are there in the UNB table-
WT /5UT amount 0.00
WT 5430 amount -75000
WT 0200 amount 12500 ( Monthly salary)
WT 4530 amount 350000
Now I am thinking, if we are deducting tax through IT221,if we clear this UNB table, our problem might get resolved
It will be a great help for me if you can tell-
1. how to check, claims process is implemented or not?
2. I have good HCM experiece but this claims process is very new to me- pls guide me how to do that
Waiting for your reply, thanks in advance
Saurabh Garg

How to Pull Data From CRT table PCL2 Cluster

Hi,
I want to show a Report, below is the Fields in the Report
Descripton----
Table Name
Total Current Month Salary----
CRT table PCL2 cluster
monthly member contribution-----CRT table PCL2 cluster
Net difference in Pay----
CRT table PCL2 cluster
How to get the Data from the CRT table PCL2 cluster in BW
is there any procedure to get the payroll data in BW?
I think CRT table is a internal Table.
any good idea's will be appricated...
Thanks
Priya

Hi,
check whether is it populating when u call
Function Module - PYX X_READ_PAYROLL_RESULT .
If not Use this Marcro.
RP-IMP-C2-IN.
Call this macro and check EPF[ ].This marco will populate both RT and EPF.
Check transaction - PC00_M40_ EPF
Cheers,
Manoj.

Clear the table data in PDF form

Hi all,
I am workin gon WD ABAP, where i have a Interactive UI elelemt, and i am calling a PDF in to it.
The PDF has a table, of which i am able to display , read and save the data to Database.
But after clicking on the save button , i want the table data to be cleared, which is not happening.
I tried with binding with an empty internal table, but that gives an error "SOM Expression....."..!!
Can any one let me know how to clear the PDF table data after clicking on some button.?
All replies will be appreciated...

Hi Runal,
I am not sure about PDF as never worked on it but we can clear the table on view by simply invalidating the node by which you have binded your table. try to invalidate if it helps...
this is the code to invalidate....
lo_nd_nodename->invalidate( ).
regards
Pranav

Inforation on Pool tables and cluster tables required.

I want to know about the pool tables and cluster tables like how to create them and how to look the tables associated with the given tables. Like for the table BSEG we have other tables linked BSID etc. I'm new to this concept please guide me.

Pooled Table:
A pooled table in R/3 has a many-to-one relationship with a table in the database (see Figures 3.1 and 3.2). For one table in the database, there are many tables in the R/3 Data Dictionary. The table in the database has a different name than the tables in the DDIC, it has a different number of fields, and the fields have different names as well. Pooled tables are an SAP proprietary construct.
When you look at a pooled table in R/3, you see a description of a table. However, in the database, it is stored along with other pooled tables in a single table called a table pool. A table pool is a database table with a special structure that enables the data of many R/3 tables to be stored within it. It can only hold pooled tables.
R/3 uses table pools to hold a large number (tens to thousands) of very small tables (about 10 to 100 rows each). Table pools reduce the amount of database resources needed when many small tables have to be open at the same time. SAP uses them for system data. You might create a table pool if you need to create hundreds of small tables that each hold only a few rows of data. To implement these small tables as pooled tables, you first create the definition of a table pool in R/3 to hold them all. When activated, an associated single table (the table pool) will be created in the database. You can then define pooled tables within R/3 and assign them all to your table pool.
Pooled tables are primarily used by SAP to hold customizing data.
Cluster Table:
A cluster table is similar to a pooled table. It has a many-to-one relationship with a table in the database. Many cluster tables are stored in a single table in the database called a table cluster.
A table cluster is similar to a table pool. It holds many tables within it. The tables it holds are all cluster tables.
Like pooled tables, cluster tables are another proprietary SAP construct. They are used to hold data from a few (approximately 2 to 10) very large tables. They would be used when these tables have a part of their primary keys in common, and if the data in these tables are all accessed simultaneously.
Table clusters contain fewer tables than table pools and, unlike table pools, the primary key of each table within the table cluster begins with the same field or fields. Rows from the cluster tables are combined into a single row in the table cluster. The rows are combined based on the part of the primary key they have in common. Thus, when a row is read from any one of the tables in the cluster, all related rows in all cluster tables are also retrieved, but only a single I/O is needed.
A cluster is advantageous in the case where data is accessed from multiple tables simultaneously and those tables have at least one of their primary key fields in common. Cluster tables reduce the number of database reads and thereby improve performance.
Restrictions on Pooled and Cluster Tables
1. Pooled and cluster tables are usually used only by SAP and not used by customers, probably because of the proprietary format of these tables within the database and because of technical restrictions placed upon their use within ABAP/4 programs. On a pooled or cluster table:
2. Secondary indexes cannot be created.
3. You cannot use the ABAP/4 constructs select distinct or group by.
4.You cannot use native SQL.
5.You cannot specify field names after the order by clause. order by primary key is the only permitted variation.
For creation of pooled /cluster table, have a look at below link.
http://help.sap.com/saphelp_erp2004/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
For creation of table pool /cluster, have a look at below link.
http://help.sap.com/saphelp_erp2004/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
Have a look at below link.
http://www.sap-img.com/abap/the-different-types-of-sap-tables.htm
Best Regards,
Vibha
*Please mark all the helpful answers

Change log in HR (Table PCL4 Cluster LA)

Hi @ all,
when infotype logging is activated changes made in infotypes are logged into table PCL4 cluster LA.
We have the following problem:
HR masterdata is stored into our system from an external system via ALE. But the problem is that no change logs are written. But we absolutely need this information!!!
Now I have coded a RFC function module which reads the log data from the external system. This also works fine. But how do I have to store the data into our PCL4(LA)???

nope - I didn't try this because I don't know about the data which is needed to store the change log correct.
Other question: I've found the function module "HR_INFOTYPE_LOG_CREATE" which seems to do what I want. But the problem is that there is no documentation available. The FM has four table parameters - does anyone how how to fill them? Has anyone used this FM? It is not used within standard programs - the "where used" function does not report any hits.
Thx in advance

Function Module for reading PCL2 - B2 FEHLER table

Hi,
   Is there any function module can use to read the FEHLER table messages? There is a standard program called RPTERL00 that used to read the FEHLER messages. However, I wish to simplified and use FM to get all the FEHLER table data in my customise program. I will need to delete some of the entries in FEHLER table after the correction has been done. Do you know how to do this?
Thanks in advance.

Hi, You don't need pass any data for table tgetbuff .
Try this simple report. It's work for me:
REPORT Z_JRQ038R NO STANDARD PAGE HEADING
                 LINE-COUNT 65
                 LINE-SIZE 175.
* D.A.T.A.
DATA: IT_FL TYPE PC2B8 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF tgetbuff occurs 0,
              x(10),
           END OF tgetbuff.
* S.E.L.L.E.C.T.I.O.N. .S.C.R.E.E.N.
SELECTION-SCREEN BEGIN OF BLOCK BL02 WITH FRAME TITLE TEXT-S20.
    PARAMETERS:
      PERNR LIKE PA0001-PERNR,
      YEAR LIKE T549Q-PABRJ,
      MONTH LIKE T549Q-PABRP.
SELECTION-SCREEN END OF BLOCK BL02.
* M.A.I.N. .P.R.O.G.R.A.M.
START-OF-SELECTION.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
    EXPORTING
      GET_PERNR     = PERNR
      GET_PABRJ     = YEAR
      GET_PABRP     = MONTH
    TABLES
      GET_TBUFF     = TGETBUFF
      GET_FEHLER    = IT_FL
    EXCEPTIONS
      NO_PERIOD_SPECIFIED   = 1
      WRONG_CLUSTER_VERSION = 2
      NO_READ_AUTHORITY     = 3
      CLUSTER_ARCHIVED      = 4
      TECHNICAL_ERROR       = 5
      OTHERS                = 6.
CHECK IT_FL[] IS NOT INITIAL.
LOOP AT IT_FL.
    WRITE: / IT_FL-LDATE, SPACE, IT_FL-LTIME, SPACE, IT_FL-ERRTY.
ENDLOOP.
Regards,

How to clear the table control content

Hi All,
I am doing BDC for cost estimate change. In this the transaction KKPB contains table control. So when ever i process with particular cost estimate, i need to fill the table control with the values. Here when i am doing the BDC for change, i need to clear all the contents of the table control then i need to fill with new entries.
So my problems is how to clear the table control entriee?? please help me in this??
Many Thanks,
Raghu.

Hi this might help u.
Check the below link.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
 NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
 i1 TYPE i,
 lifnr LIKE rf02k-lifnr,
 bukrs LIKE rf02k-bukrs,
 ekorg LIKE rf02k-ekorg,
 ktokk LIKE rf02k-ktokk,
 anred LIKE lfa1-anred,
 name1 LIKE lfa1-name1,
 sortl LIKE lfa1-sortl,
 land1 LIKE lfa1-land1,
 akont LIKE lfb1-akont,
 fdgrv LIKE lfb1-fdgrv,
 waers LIKE lfm1-waers,
 END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
 j1 TYPE i,
 banks LIKE lfbk-banks,
 bankl LIKE lfbk-bankl,
 bankn LIKE lfbk-bankn,
 END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 filename = 'C:\first1.txt'
 filetype = 'DAT'
 TABLES
 data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 filename = 'C:\second.txt'
 filetype = 'DAT'
 TABLES
 data_tab = jtab.
LOOP AT itab.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF02K-KTOKK'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RF02K-LIFNR'
 itab-lifnr.
 PERFORM bdc_field USING 'RF02K-BUKRS'
 itab-bukrs.
 PERFORM bdc_field USING 'RF02K-EKORG'
 itab-ekorg.
 PERFORM bdc_field USING 'RF02K-KTOKK'
 itab-ktokk.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-LAND1'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFA1-ANRED'
 itab-anred.
 PERFORM bdc_field USING 'LFA1-NAME1'
 itab-name1.
 PERFORM bdc_field USING 'LFA1-SORTL'
 itab-sortl.
 PERFORM bdc_field USING 'LFA1-LAND1'
 itab-land1.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-KUNNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKN(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 cnt = 0.
 LOOP AT jtab WHERE j1 = itab-i1.
 cnt = cnt + 1.
 CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-banks.
 CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-bankl.
 CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-bankn.
 IF cnt = 5.
 cnt = 0.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=P+'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKN(02)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 ENDIF.
 ENDLOOP.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB1-FDGRV'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFB1-AKONT'
 itab-akont.
 PERFORM bdc_field USING 'LFB1-FDGRV'
 itab-fdgrv.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB1-ZTERM'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB5-MAHNA'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFM1-WAERS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFM1-WAERS'
 itab-waers.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF02K-LIFNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
 PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
REPORT zmm_pr_upload_mat
 NO STANDARD PAGE HEADING
 LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
 sno(3), " SNo
 bsart(004), " PR Type
 epstp(001), " Item Category
 knttp(001), " Account Assignment
 eeind(010), " Delivery Date
 lpein(001), " Category of Del Date
 werks(004), " Plant
 lgort(004), " Storage Location
 ekgrp(003), " Purchasing Group
 matkl(009), " Material Group
 bednr(010), " Tracking No
 afnam(012), " Requisitioner
Item Details
 matnr(018), " Material No
 menge(017), " Quantity
 badat(010),
 frgdt(010),
 preis(014), " Valuation Price
 waers(005), " Currency
 peinh(005),
 wepos(001),
 repos(001),
 sakto(010), " GL Account
 kostl(010), " Cost Center
 bnfpo(005),
 END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
 sno(3), " SNo
 bsart(004), " PR Type
 epstp(001), " Item Category
 knttp(001), " Account Assignment
 eeind(010), " Delivery Date
 werks(004), " Plant
 lgort(004), " Storage Location
 ekgrp(003), " Purchasing Group
 matkl(009), " Material Group
 bednr(010), " Tracking No
 afnam(012), " Requisitioner
 END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
 sno(3), " SNo
 matnr(018), " Material No
 menge(017), " Quantity
 preis(014), " Valuation Price
 sakto(010), " GL Account
 kostl(010), " Cost Center
 END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
 v_rowno(5), " Row No
 v_2(2), " Counter
 v_rows LIKE sy-srows, " Rows in TC
 v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = syst-cprog
 dynpro_number = syst-dynnr
 IMPORTING
 file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
 EXPORTING
 filename = p_file
 filetype = 'DAT'
 TABLES
 data_tab = i_pr
 EXCEPTIONS
 conversion_error = 1
 invalid_table_width = 2
 invalid_type = 3
 no_batch = 4
 unknown_error = 5
 gui_refuse_filetransfer = 6
 OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
 MOVE-CORRESPONDING i_pr TO it_item.
 APPEND it_item.
 CLEAR it_item.
 AT END OF sno.
 READ TABLE i_pr INDEX sy-tabix.
 MOVE-CORRESPONDING i_pr TO it_header.
 APPEND it_header.
 CLEAR it_header.
 ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
 PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBAN-BEDNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'EBAN-BSART'
 it_header-bsart.
 PERFORM bdc_field USING 'RM06B-EPSTP'
 it_header-epstp.
 PERFORM bdc_field USING 'EBAN-KNTTP'
 it_header-knttp.
 PERFORM bdc_field USING 'RM06B-EEIND'
 it_header-eeind.
 PERFORM bdc_field USING 'RM06B-LPEIN'
 it_header-lpein.
 PERFORM bdc_field USING 'EBAN-WERKS'
 it_header-werks.
 PERFORM bdc_field USING 'EBAN-LGORT'
 it_header-lgort.
 PERFORM bdc_field USING 'EBAN-EKGRP'
 it_header-ekgrp.
 PERFORM bdc_field USING 'EBAN-MATKL'
 it_header-matkl.
 PERFORM bdc_field USING 'EBAN-BEDNR'
 it_header-bednr.
 PERFORM bdc_field USING 'EBAN-AFNAM'
 it_header-afnam.
Item Details
 v_l = 0.
To add no. of rows
 v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
 v_rowno = 130 .
 LOOP AT it_item WHERE sno = it_header-sno.
 v_l = v_l + 1.
 IF v_l = 14 .
 IF v_2 = 12 .
 v_2 = 12 .
 v_l = 2 .
From second time onwards it is displaying 12 rows only
 v_rowno = v_rowno + 120 .
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'RM06B-BNFPO'
 v_rowno.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 ELSE.
V_2 initialized to 12 for second screen purpose
 v_2 = 12 .
 v_l = 2 .
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'RM06B-BNFPO'
 v_rowno .
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 ENDIF.
 ENDIF.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 CLEAR v_field.
 CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
 PERFORM bdc_field USING v_field it_item-matnr.
 CLEAR v_field.
 CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
 PERFORM bdc_field USING v_field it_item-menge.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBAN-PREIS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'EBAN-PREIS'
 it_item-preis.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBKN-SAKTO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'EBKN-SAKTO'
 it_item-sakto.
Cost Center
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-KOSTL'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'COBL-KOSTL'
 it_item-kostl.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 ENDLOOP.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
Call The Transaction
 PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
with regards,
Hema Sundara.

How to find which transparent tables compose cluster tableuFF1AKONV

How to find which transparent tables compose cluster table：KONV

Hi,
Welcome to SDN.
Try doing this ....
1). Goto se12 and display the table BSEG
2). Click on the Delivery & Maintenanace tab
3). Double click on the Pool/Cluster field
4). On the next screen do a where used list
You will find all the related tables.
Regards,
Amit
Reward all helpful replies.

Clear a table

Hi,
I need to clear a table (this table is a context node and the rows are the attributes of this node) when I click on the button 'Back'.
What method can I use?
Tks...

Invalidate your node where you want to clear your table.
You can use following code.
data lo_nd_<node_name> type ref to if_wd_context_node.
lo_nd_<node_name> = wd_context->get_child_node( name = wd_this->wdctx_<node_name> ).
lo_nd_<node_name>->invalidate( ). " in place of <node_name> put name of your node which is binded to table UI.
I hope it helps.
Regars,
Rohit

Clearing a Table control

Hi
Can anyone tell me how to clear the table control.
I have cleared the internal table .
But it is not getting cleared.
Cheers
Christina

REPORT ZFI_CF_PLANING
 NO STANDARD PAGE HEADING
 MESSAGE-ID Z00.
*& TABLE DECLARATIONS
TABLES: ZFI_CF_PLANING,ZFI_CF_TABMAIN.
*& DATA DECLARATIONS
DATA: PAYDATE TYPE ZFI_CF_PLANING-CALDATE.
data : t_cvalue type zfi_cf_planing-cvalue,
 t_cperiod type zfi_cf_planing-cperiod,
 t_cyear type zfi_cf_planing-calyear,
*RES, "To Store Response Code of Dialog Box
 V_MODE(4), "To Store sy-ucomm
 V_buper TYPE T009B-POPER,
 v_gjahr TYPE T009B-BDATJ,
 V_Dbuper TYPE T009B-POPER,
 v_Dgjahr TYPE T009B-BDATJ,
 V_QTY_VALUE TYPE ZFI_CF_PLANING-INVALUE,
 V_RAT_VALUE TYPE ZFI_CF_PLANING-INVALUE,
 V_TOT_VALUE TYPE ZFI_CF_PLANING-INVALUE,
 V_MAT_CONS TYPE ZFI_CF_PLANING-INVALUE,
 V_CHECK TYPE ZFI_CF_PLANING-INVALUE,
 V_code TYPE ZFI_CF_PLANING-code,
 R_buper TYPE T009B-POPER,
 R_gjahr TYPE T009B-BDATJ,
 V_ACCNO TYPE ZFI_CF_TABMAIN-ACCNO,
 V_ACCNO1 TYPE ZFI_CF_TABMAIN-ACCNO,
 PDATUM TYPE D.
*--Table Control Declaration
CONTROLS MAIN TYPE TABLEVIEW USING SCREEN 100.
*& INTERNAL TABLE DECLARATIONS
data : it_final type standard table of ZFI_CF_PLANING initial size 0
with header line.
*data : it_final2 type standard table of ZFI_CF_PLANING initial size 0
*with header line.
DATA : IT_CHECK LIKE ZFI_CF_PLANING OCCURS 1 WITH HEADER LINE.
*& START-OF-SELECTION
START-OF-SELECTION.
SELECT *
INTO CORRESPONDING FIELDS OF TABLE IT_FINAL
FROM mara
up to 100 rows.
*--Calling the Screen
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
 Setting the Toolbar and Titlebar
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MENU'.
SET TITLEBAR 'TITLE'.
IF V_MODE = 'COPY'.
 SELECT *
 FROM ZFI_CF_PLANING
 INTO TABLE IT_FINAL
 where pyear = V_GJAHR
 and pperiod = V_BUPER
 and accno = zfi_cf_PLANING-accno.
 SORT IT_FINAL BY BUOM DESCENDING.
 DATA : V_DES TYPE ZFI_CF_TABMAIN-DESCRIP2.
 SELECT SINGLE
 DESCRIP2
 FROM ZFI_CF_TABMAIN
 INTO V_DES
 WHERE CODE = 'EXSALE'
 AND ACCNO = ZFI_CF_planing-ACCNO
 or CODE = 'LSALE'.
 IF SY-SUBRC = 0.
 ZFI_CF_TABMAIN-DESCRIP2 = V_DES.
 endif.
ENDIF.
IF V_MODE = 'CLEA'.
REFRESH IT_FINAL.
CLEAR : V_MODE.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 Moving the modified records into other internal table
 and displaying the those in ALV POPUP GRID
MODULE USER_COMMAND_0100 INPUT.
*BREAK-POINT.
CASE SY-UCOMM.
 WHEN 'EXIT' or 'CANC' OR 'BACK'.
 LEAVE PROGRAM.
 WHEN 'COPY'.
 V_MODE = SY-UCOMM.
 V_ACCNO1 = ZFI_CF_PLANING-ACCNO.
 V_Dbuper = ZFI_CF_PLANING-PPERIOD.
 v_Dgjahr = ZFI_CF_PLANING-PYEAR.
 CLEAR SY-UCOMM.
 WHEN 'PROC'.
 V_MODE = SY-UCOMM.
 V_ACCNO1 = ZFI_CF_PLANING-ACCNO.
 V_Dbuper = ZFI_CF_PLANING-PPERIOD.
 v_Dgjahr = ZFI_CF_PLANING-PYEAR.
 CLEAR SY-UCOMM.
 WHEN 'CLEA'.
 V_MODE = SY-UCOMM.
 CLEAR SY-UCOMM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module SAVE_REC INPUT
 Modifiying the current record of table control
MODULE SAVE_REC INPUT.
MOVE-CORRESPONDING ZFI_CF_PLANING TO IT_FINAL.
 MODIFY IT_FINAL INDEX MAIN-CURRENT_LINE.
 IF SY-SUBRC <> 0.
 APPEND IT_FINAL.
 ENDIF.
IF V_MODE = 'PROC'.
 IF ZFI_CF_PLANING-CODE <> '' .
 data : v_code1 type ZFI_CF_tabmain-code.
 SELECT SINgLE CODE
 FROM ZFI_CF_CATMAster
 INTO V_CODE1
 WHERE CODE = ZFI_CF_PLANING-CODE.
 IF SY-SUBRC <> 0.
 MESSAGE I001(YMSG) WITH 'Invalid code'.
 ENDIF.
 ENDIF.
ENDIF.
ENDMODULE. " SAVE_REC INPUT
*& Module DISPLAY OUTPUT
 text
module DISPLAY output.
MOVE-CORRESPONDING IT_FINAL TO ZFI_CF_PLANING.
endmodule. " DISPLAY OUTPUT
*& Module COPY OUTPUT
 text
module COPY output.
CLEAR IT_FINAL.
READ TABLE IT_FINAL INDEX 1.
MOVE-CORRESPONDING IT_FINAL TO ZFI_CF_PLANING.
IF V_MODE = 'PROC'.
 ZFI_CF_PLANING-ACCNO = V_ACCNO1.
 ZFI_CF_PLANING-PPERIOD = V_DBUPER.
 ZFI_CF_PLANING-PYEAR = V_DGJAHR.
 SELECT SINGLE DESCRIP2
 FROM ZFI_CF_TABMAIN
 INTO ZFI_CF_TABMAIN-DESCRIP2
 WHERE ACCNO = ZFI_CF_PLANING-ACCNO.
CLEAR : V_MODE.
ENDIF.
IF V_MODE = 'COPY'.
 ZFI_CF_PLANING-ACCNO = V_ACCNO1.
 ZFI_CF_PLANING-PPERIOD = V_DBUPER.
 ZFI_CF_PLANING-PYEAR = V_DGJAHR.
CLEAR : V_MODE.
ENDIF.
endmodule. " COPY OUTPUT
flow logic code in screen level
*PROCESS BEFORE OUTPUT.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT IT_FINAL WITH CONTROL MAIN CURSOR MAIN-TOP_LINE.
MODULE DISPLAY.
ENDLOOP.
MODULE COPY.
*PROCESS AFTER INPUT.
PROCESS AFTER INPUT.
MODULE QUIT AT EXIT-COMMAND.
FIELD ZFI_CF_planing-ACCNO MODULE VALIDATE_ACCNO.
FIELD ZFI_CF_PLANING-PYEAR MODULE VALIDATE_PYEAR.
FIELD ZFI_CF_PLANING-PPERIOD MODULE VALIDATE_PPERIOD.
MODULE USER_COMMAND_0100.
LOOP AT IT_FINAL.
 MODULE SAVE_REC.
ENDLOOP.
MODULE CALCULATE.
*MODULE CHANGE_SCREEN2.

How to convert Internal Table to Cluster Table ?

How to convert Internal Table to Cluster Table ?

Use :
EXPORT itab TO DATABASE dbtab(ar) ID key.
EXPORT obj1 ... objn TO DATABASE dbtab(ar) ID key.
Additions:
1. ... = f (for each field you want to export)
2. ... FROM f (for each field you want to export)
3. ... CLIENT g before ID key )
4. ... USING form
5. ... FROM wa (as last addition or after dbtab(ar))
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas. See Implicit field names not allowed with clusters and Table work areas not allowed.
Effect
Stores a data cluster in database table dbtab. The specified objects obj1 ... objn (fields, structures, or tables) are stored as a single cluster in the database table dbtab.
The specified database table dbtab must have a standard structure.
The database table dbtab is divided into various logically-related sections (ar, two-character name).
You can export a collection of data objects (a data cluster) to a part of the database using a key (field key).
You can import individual data objects from this collection using the IMPORT statement.
Notes
In classes, you must always assign explicit names to the data objects you want to export, that is, you must use either addition 1 or addition 2.
In classes, you must always specify the work area explicitly, that is, addition 5 is obligatory.
The table dbtab that appears after DATABAE must be declared under TABLES (except in addition 5).
You cannot export the header lines of internal tables. If you specify the name of an internal table with header line, the system always exports the body of the table.
You cannot export data, object, or interface references.
The data is stored in the database, and is consequently not actually stored until a database commit occurs (see LUW). Until this point, you can undo all of your changes using a database rollback (see Programming Transactions).
Example
Exporting two fields and an internal table to the database table INDX:
TABLES INDX.
TYPES: BEGIN OF ITAB3_TYPE,
 CONT(4),
 END OF ITAB3_TYPE.
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
 F1(4), F2 TYPE P,
 ITAB3 TYPE STANDARD TABLE OF ITAB3_TYPE WITH NON-UNIQUE
 DEFAULT KEY INITIAL SIZE 2,
 WA_INDX TYPE INDX.
Fill the data fields before CLUSTR
before the actual export
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
Export der Daten.
EXPORT F1 FROM F1
 F2 FROM F2
 ITAB3 FROM ITAB3
 TO DATABASE INDX(ST) FROM WA_INDX ID INDXKEY.

Regards

Generic extractors on pool table and Cluster tables

Good Afternoon all,
Can we create generic extractors on Cluster or pool Table. If yes Let me know how?
I am trying to create a Generic Extractor on BSEC Table but it is not allowing me to do this. It throws error that"Extraction from pool tables and cluster tables is not permitted"
Kindly guide me on this
Thanks,
Vaishali.

Hi
you cannot do generic extraction directly on pooled or cluster tables.
You can create a function module, then you can create a Generic Data source based on this..
Hope it helps,
Thanks,
Teja
Edited by: Teja badugu on Apr 15, 2008 12:24 PM

Issue with single table hash cluster

I'm still learning lots about html db so please do bear with me...
I have a table that is part of a single table hash cluster. The cluster and table are created like so:
create cluster webmon.owm_system
db_id number(3),
env_id number(3)
size 171
hashkeys 1009
single table
pctfree 2
pctused 96;
create table webmon.owm_system
tier_id number(3) not null,
host_id number(3) not null,
port number(4) not null,
sid varchar2(8) not null,
admin_user varchar2(32) not null,
admin_auth varchar2(48) not null,
primary_dba_id number(3) not null,
secondary_dba_id number(3) not null,
primary_bac_id number(3) not null,
secondary_bac_id number(3) not null,
version_id number(3) not null,
log_mode_id number(3) not null,
db_id number(3) not null,
env_id number(3) not null,
admin_conn varchar2(32) null,
constraint owm_system_pk primary key (db_id, env_id)
cluster webmon.owm_system
db_id,
env_id
);I have created a form (and report) to view and edit the data in the table. When I click the "Apply Changes" button on the form after editing data, I get an error. The SQL that is sent to the database is incorrect.
Here is the (reformatted) incorrect SQL that is sent (captured in a database trace file):
update
"WEBMON"."OWM_SYSTEM"
set
"SECONDARY_DBA_ID" = :DML_BV0001,
"DB_ID" = :DML_BV0002,
"DB_ID" = :DML_BV0003, /* This should not be here */
"ENV_ID" = :DML_BV0004,
"ENV_ID" = :DML_BV0005, /* This should not be here */
"HOST_ID" = :DML_BV0006,
"PORT" = :DML_BV0007,
"SID" = replace(:DML_BV0008,'%null%',null),
"ADMIN_USER" = replace(:DML_BV0009,'%null%',null),
"ADMIN_AUTH" = replace(:DML_BV0010,'%null%',null),
"ADMIN_CONN" = replace(:DML_BV0011,'%null%',null),
"VERSION_ID" = :DML_BV0012,
"LOG_MODE_ID" = :DML_BV0013,
"TIER_ID" = :DML_BV0014,
"PRIMARY_DBA_ID" = :DML_BV0015,
"PRIMARY_BAC_ID" = :DML_BV0016,
"SECONDARY_BAC_ID" = :DML_BV0017
where
"DB_ID" = :p_rowid
and
"ENV_ID" = :p_rowid2Why are the DB_ID and ENV_ID columns in the statement twice? That is the error.
Now, if I create the table as just a basic, non-clustered table like this:
create table webmon.owm_system
tier_id number(3) not null,
host_id number(3) not null,
port number(4) not null,
sid varchar2(8) not null,
admin_user varchar2(32) not null,
admin_auth varchar2(48) not null,
primary_dba_id number(3) not null,
secondary_dba_id number(3) not null,
primary_bac_id number(3) not null,
secondary_bac_id number(3) not null,
version_id number(3) not null,
log_mode_id number(3) not null,
db_id number(3) not null,
env_id number(3) not null,
admin_conn varchar2(32) null,
constraint owm_system_pk primary key (db_id, env_id)
);Everything works as expected. The (correct) SQL sent in this case is:
update
"WEBMON"."OWM_SYSTEM"
set
"SECONDARY_DBA_ID" = :DML_BV0001,
"DB_ID" = :DML_BV0002,
"ENV_ID" = :DML_BV0003,
"HOST_ID" = :DML_BV0004,
"PORT" = :DML_BV0005,
"SID" = replace(:DML_BV0006,'%null%',null),
"ADMIN_USER" = replace(:DML_BV0007,'%null%',null),
"ADMIN_AUTH" = replace(:DML_BV0008,'%null%',null),
"ADMIN_CONN" = replace(:DML_BV0009,'%null%',null),
"VERSION_ID" = :DML_BV0010,
"LOG_MODE_ID" = :DML_BV0011,
"TIER_ID" = :DML_BV0012,
"PRIMARY_DBA_ID" = :DML_BV0013,
"PRIMARY_BAC_ID" = :DML_BV0014,
"SECONDARY_BAC_ID" = :DML_BV0015
where
"DB_ID" = :p_rowid
and
"ENV_ID" = :p_rowid2The "real" system in question has a fairly large number of single table hash clusters. I'm leary of continuing my explorations if there is a problem with using single table hash clusters. On the other hand, I'm quite open to the idea that I've done something wrong!
Any pointers? Is there anyway to change the SQL that is being generated when using the single table hash cluster? More information needed?
Thanks,
Mark

Mark,
Can't help with the hash table problem but as a method of dealing with it you could just make a procedure to manage the table.
Pass the value of :REQUEST (matches value of button) in and you'll be able to modify the tables.
procedure manage_owm_system (p_request varchar2,db_id number ...)is
begin
case p_request
when 'CREATE' then
insert
into ....
when 'SAVE' then
update .....
else
raise_application_error(-20001,'Unkown request');
end case;
end;
put that in a plsql reqion after submit
begin
manage_owm_system(p_request=>:REQUEST,p_dbid=>:P1_DBID .......);
end;
You need to create something similar , with out parameters, to populate the items when the pags loads.
Chris

Clear FEHLER table in cluster B2

Similar Messages

Maybe you are looking for