Clear the webdynpro error messages in Dictionary serach help window
Hi ,
I have a search help attached to one of the table column in table control. In the On Enter event of search help i am trowing some error messages. I am using Dictionary standard search help....
On enter event is working fine. My issue is when some error messages are thrown in the webdynpro view those messages are also displaying in the search help window. Whatever may be the message is showing in the webdynpro view at runtime all those messages are getting displayed when i open a searchhelp in the table control.
How can i clear those messages ? When its standard searchhelp where can i write the code to clear the webdynpro meesages.
Could anybody suggest me on this....?
Thanks & Regards
Sireesha...
Hi Sireesha,
As far as I know there is no direct way to track the event of F4 window opened, so that we can clear the messages...
Below is one solution.
WD Standard fires an event when ever a window is opened in the application.
The event that is fired is CL_WDR_WINDOW->IF_WD_WINDOW~WINDOW_OPENED
This is an instance event. Please follow the below steps to handle this event
1) Store the message manager reference in a class as a Static variable
2) Create a Event handler for all instances (A Static event handler will suffice)
3) Give importing parameter Sender (it will be automatically identified by the class builder and the corresponding CL_WDR_WINDOW reference will be populated into this at runtime)
4) Now use the below code to clear the messages
DATA lcl_window_ref TYPE REF TO cl_wdr_internal_window.
TRY.
lcl_window_ref ?= sender.
CATCH cx_sy_move_cast_error.
RETURN.
ENDTRY.
IF lcl_window_ref->is_value_help = abap_true.
CALL METHOD gr_wd_msg_mgr->clear_messages
EXPORTING
including_permanent_msg = abap_true.
ENDIF.
below is how u can set the handler
Assuming handler method is clear_msgs_on_f4wd_window_open
SET HANDLER clear_msgs_on_f4wd_window_open FOR ALL INSTANCES.
Please let me know if you need more help
Thanks,
Anand
Similar Messages
-
I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.
Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon -
I can't open ITunes, I have an error message that says MSVCR80.dll is not found. Is anyone able to help solve this issue for me. I have tried to unistall and reinstall ITunes twice but continue to get the same error message.
A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time? -
HT4528 How do I clear the following error message? Killing my battery!
Mar 21 14:12:15 Arkie wifid[14] <Error>: WiFi:[385585935.693151]: WiFi unquiescing requested by "locationd" IOS 6.1.3
See if this helps
http://support.apple.com/kb/ts1559 -
Interval Since Last Panic Report: 287561 sec
Panics Since Last Report: 1
Anonymous UUID: 5E7ECC78-E01D-2787-EB12-49DE5B88D18D
Fri Oct 19 10:09:54 2012
panic(cpu 0 caller 0xffffff800bab7bd5): Kernel trap at 0xffffff800ba2e906, type 12=stack bounds, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80855fd000, CR3: 0x000000000e468000, CR4: 0x0000000000000660
RAX: 0x39ee95f68824000e, RBX: 0xffffff801737f000, RCX: 0x0000000009000000, RDX: 0xffffff807f591078
RSP: 0xffffff808ad8be40, RBP: 0x01ffff808ad8beb0, RSI: 0xffffff807f591068, RDI: 0x0000000000000000
R8: 0xffffff800c0bec60, R9: 0x0000000000000000, R10: 0xffffff800be4d6b0, R11: 0xffffff800c07de88
R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0xffffff8017400550, R15: 0x0000000000000000
RFL: 0x0000000000010046, RIP: 0xffffff800ba2e906, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff80855fd000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808ad8bae0 : 0xffffff800ba1d626
0xffffff808ad8bb50 : 0xffffff800bab7bd5
0xffffff808ad8bd20 : 0xffffff800bace4ed
0xffffff808ad8bd40 : 0xffffff800ba2e906
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x1ffff808ad8beb0
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000b800000
Kernel text base: 0xffffff800ba00000
System model name: iMac10,1 (Mac-F2268DC8)
System uptime in nanoseconds: 1178971303
last loaded kext at 269035603: com.apple.driver.XsanFilter 404 (addr 0xffffff7f8d465000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528ASQ, 1 TB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 5
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x04100000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2This is a Kernel Panic, KP's can be caused by many things from hardware to software. A common cause of KP's is RAM related. RAM related KP's are one of three things, those are:
Failed RAM (yes it can and does fail)
Incorrect RAM (did you upgrade the RAM recently?????)
Unseated RAM (yes it can become unseated)
RAM related issues take some methodical troubleshooting, one place to start is by trying Rember which tests the RAM. You can find Rember at www.macupdate.com. Rember while good will not catch every issue and when it does only indicates you have a RAM issue so you need to locate which problem you have from the 3 choices above.
As mentioned KP's can be caused by many other causes, I would recommend studying the X Lab's Kernel Panics article very carefully to try and locate the cause of yours. If you have AppleCare coverage on your system you can also call them or you can take your machine into an Apple Store or AASP to get it professionaly diagnosed. -
I have reinstalled both updates as advised above but mail v4.6 still does not work and mail v4.5 continues to have the same error message?
Maybe some help here.
http://support.apple.com/kb/TS4424 -
Stop the Internal Error Message in Fireworks CS4 or CS3
About 8 hours ago I ran into what is apparently a fairly
common problem for many people using Fireworks - the error message
that wouldn't allow me to save anything. Luckily, I paid attention
in class long enough to at least know to save my work often, so I
didn't lose much - just a basic wireframe that I threw together in
15 minutes or so. Thankfully, I tried saving when I did or this
would probably be a very tearful night for me. Instead, it's just a
long night. I can deal with that.
But, before I pat my iMac on the top of it's screen and say
"goodnight" I wanted to share with you the secret to "fixing" the
error message. Hopefully this will help those poor souls in the
future who need a little guidance from someone who's been there,
done that, and is too tired to design the t-shirt. This method will
also work on Windows machines.
I'm not saying this is guaranteed to work for you, but I'm
telling you it's worth a shot. It only requires a little of your
time to do and will hopefully be the fix you need. If it's not,
please accept my sincerest understanding of your frustration and
try another method. This fix suggests that you have added, removed,
or relocated fonts on your computer since the last time Fireworks
worked properly, however, even if you haven't done any of those
things I'd still recommend giving this a try. Here's what you do:
1. Open your favorite font manager software. I prefer the
pre-installed Font Book on the Mac, but you can use any font
manager that you want. Some good commercial font management
programs for Mac include, MasterJuggler, Suitcase Fusion, FontAgent
Pro, and Font Explorer X. For Windows you might want to try, Font
Fitting Room, X-Fonter, Suitcase for Windows, OT1 Font Manager by J
M Berthier, MainType, FontExplorer for Windows, Printer’s
Apprentice, FontAgent Pro for Windows, Typograf, or FontExpert.
Those are in no particular order, just in case you were wondering.
2. select all of your installed fonts - including your system
fonts. Run your "validate font" command for the font management
program you're using. Sit back and let it work. I had more than
6,000 fonts on my Mac, so it took a few minutes to run through all
of them.
3. Your font management program should let you know which, if
any, of your fonts are corrupt, duplicates, or otherwise
dead-weight. Chances are there will be a few if you're getting the
internal error message at start-up or save with Fireworks. You need
to delete or at least remove these fonts from the fonts folder. I
had, and I'm ashamed of this, 256 duplicates and 135 dead fonts on
my poor computer. But, in my own defense, I did just reinstall many
of the fonts a few days ago and was planning to gradually work
through them to pull out the dead/unwanted ones. I should have done
that before putting them to disc last time, but no... I wasn't
thinking.
4. once you have the fonts removed/deleted that produced
errors or warnings during the scan with your font management
program you might want to run the scan one more time just to be
sure you got everything out. If everything looks good, you can now
quit/exit the font manager.
5. here's where things will seriously divide for Windows
users and Mac users. Therefore, I'm not going to fully explain
where you need to go or how to get there for this step, but I will
provide the basics. On your computer, you need to find the folders
for fireworks that contain your preferences for the program (hint,
look in the user's appdata folders, which is hidden, for Windows or
the user's Library for Mac). Inside the preferences folder you'll
find a file that houses a list of fonts, probably called fontlist
or something very similar. Delete it. You might also wish to delete
the cache for the program preferences. Those need to be regenerated
in order for this to work.
6. Find your computer's font cache while you're looking
through the massive amounts of folders and delete the file there
too for a little added security that this will work.
7. restart your computer.
8. open Fireworks and create a new file. Save that file to
your computer in whatever format you want.
If the program opened, the file saved, and you didn't receive
that same old error message, congratulations, it worked! You may
have to re-establish your preference settings, but you shouldn't
have any other problems.
That is the best I can do this evening... or morning I
suppose it would be. Best of luck to you!
-Skipdjbroklee wrote:
> i'm on the struggle still, i've done the uninstall
reinstall thing,bought a
> font manager even though i don't go big on fonts,cleared
cahces,did
> regedits,you name it.
> the fight continues.
> as far as support from adobe they pretty much don't care
they got my thousands
> already this quarter.
> i'm thinking about a system restore now, pretty much
lost out on those last
> two days of pay and now that today is about over i have
nothing to lose if i
> can't get it fixed.
> anyone have any ideas out there?
> it's too bad i committed to adobe before accepting these
adobe type jobs.
> worst case i'll do the work on mirage until i can
finally get the quick
> background drop of fireworks again.
> i didn't pay thousands but it has never even hiccupped
no matter scripts or
> tasks i crammed into it.
> this fireworks issue sort of thing is what put me off
adobe in 2000, no
> support for issues,and wonky worksmanship.
>
> anyone have the answer thow it over to me,i could surely
use the catch up on
> getting paid thing right about now.
An update is being made to address some major problems, if
you hold
tight you might find a solution soon.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html
How To Report A Bug To Adobe
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform -
I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?
Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2 -
What do I need to do to eliminate the following error message:
The procedure entrypoint sqlite3_wal_checkpoint could not be located in the dynamic link library sqlite3.dll.
I am currently running Firefox 6.0 on my laptop. Thanks.So for the people with similar problem as mine, please do the following. It cleared that error message right away so this must be the solution.
1. Go to c:\program files (X86)\Common Files\Apple\Application Support
2. Find SQlite3.dll in that folder, then right click it and choose Copy
3. Go to c:\program files(X86)\Common Files\Apple\Mobile Device Support
4. Paste SQlite3.dll in this folder
5. Restart your Windows
ps. use Program Files instead of Program Files(X86) folder if your computer does Not use 64bits. Mine does. -
I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.
iTunes 9.0.x is certainly compatible with Win7 64 bit since I use that exact setup on 3 different PCs. Two suggestions for your installation problems:
1)Download a new copy of the 64 bit installer from Apple then, instead of just running the itunes installer right click on it and try 'run as adminstrator'. In my experience that clears up a world of problems with program installation in Win7 and Vista. This is necessary even if you're already logged in as an administrator.
2) Try the previous version of iTunes (9.0.3). You can get a copy at http://www.oldapps.com/itunes.php?old_itunes=54 again right click on the file and "run as administrator"
Good luck, hope this helps.
Lil -
Once I finish upgrading iTunes on my Windows PC, I had an Error as t shown on the image below which doesn't allow the iTunes App to lunch.
Please advise what shall I do ?Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?
This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express. -
I'm having trouble downloading an upgrade for Photoshop Elements 12 and was having a Chat with Abishek who gave me a link. When I clicked on the link I got the following error message:
413
Header Length too LargeThat's an error message typically seen when using the Chrome browser.
Clear your cache and cookies in Chrome then try again.
Or, as Ned says, use a different browser. -
I have an Epson 2200 which was in perfect working condition until just now when I received the following error message: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /. What to do???
Hello kelsey1942,
It sounds like you are not able to print to your Epson 2200. I found an article with steps you can take to troubleshoot printer issues on a Mac:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Component level display of the Custom Error Message in 11g
Iam using custom error handler that extends the default DCErrorHandlerImpl class to handle the Custom exceptions thrown from the service layer, and able to see the exception displayed in the ADF UI in a popup window.
How can we do Customization in order to display the Custom error message inline with a component (i.e. associated with a specific UI component with the arrow mark look and feel ) instead of the global level message displayed as a pop up window on the ADF UI page? Please suggest.
Thanks,
Kayal.
Edited by: user11217416 on Feb 15, 2012 6:07 AM
Edited by: user11217416 on Feb 15, 2012 6:14 AMHi,
Try as follows
final static int MSG_FATAL = 1;
final static int MSG_ERROR = 2;
final static int MSG_WARN = 3;
final static int MSG_INFO = 4;
public static void showMsgForRelevantComponentAll(int iSeverity, String sMsg, UIComponent uIComponent) {
FacesMessage msg = null;
switch (iSeverity) {
case MSG_FATAL:
msg = new FacesMessage(FacesMessage.SEVERITY_FATAL, null, sMsg);
break;
case MSG_ERROR:
msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, sMsg);
break;
case MSG_WARN:
msg = new FacesMessage(FacesMessage.SEVERITY_WARN, null, sMsg);
break;
case MSG_INFO:
default:
msg = new FacesMessage(FacesMessage.SEVERITY_INFO, null, sMsg);
FacesContext facesContext = FacesContext.getCurrentInstance();
facesContext.addMessage(uIComponent.getClientId(facesContext), msg);
}
Maybe you are looking for
-
my apple id is wrong email address on i pod i can download as it comes up with right email but to update wrong email how do i delete wrong email
-
Mouse cursor acceleration - any way to fix?
Just got my first Mac and I love it. I only have one problem - when I connect an external mouse via USB, the cursor tracking is terrible. I have the speed cranked up all the way in System Preferences, but it is still too slow when I'm not shoving the
-
Sun Identity Server on Windows 2003?
When will the Sun Java Systems Identity Server be available for Windows 2003? Thanks, Eoin
-
Attachments with follow-on documents.
Hi SRM Gurus, I am using SRM classic scenario. I am creating a shopping cart. I am attaching a text file as an attachment to the Shopping cart. Once the shopping cart is approved, a follow-on document ( pur.requisition) is created in the backend syst
-
FCPX v10.2 Destination settings: Apple Devices 1080p Video Codec: H.264 Better Quality Resolution: 1920x1080 Add to playlist: Library Many thanks for anyone who can help me before I completely lose my mind!