Click a tab - Clear the Corresponding Page Cache

When a user clicks a tab and they are taken to a search page that is assigned to that tab, I would like the cache of that page to be cleared so that
all previous entries in search fields are gone.
I would only like this clearing-out to happen when the page is entered via the tab and not when the page is refreshed as would happen following running a search.
Can this be done ?
Thanks!
L

Hi
You could make your unconditional branch pass a request value and then make the clear cache process conditional on the request value not being equal to that??
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Similar Messages

How to set a New Tab as the start page in Firefox and lock in my choice of web sites

You may set the New Tab page Firefox shows when opening a new tab as its start page, and you can lock in the web sites you want displayed there.
I set my browser to open a New Tab as its start page and have locked in six destinations from which to choose on my start page.
First I open Firefox and open a new tab. Then I delete any open tabs other than this New Tab. Optionally, I can also set a second tab to open to a specific web site
Next I go to Tools and Options (or Edit and Preferences in Linux) and select the General tab on the far left. Click on
[Use Current Pages].
Each time I open Firefox it will open showing me the New Tab.
I can select from pages that I have already visited the six pages I want to have appearing on my New Tab every time. Supposing there are no pages locked in yet, and I don't want the site in the top left. I hit the X in its thumbnail's top right corner, it disappears and every other site thumbnail moves up and there is a new site appearing in the sixth slot. Note that if I have visited one page frequently, it may appear more than once, or be replaced by itself. If that happens, just keep deleting until the page you want shows up.
If I find a site that I want to save, then there is a thumbtack in the top left corner of the thumbnail. It is black, but if I click it it turns blue, and the thumbnail is a keeper.
This web site is in the second row, second over, but I want it to be up on the top row. Just drag and drop and the two sites exchange places. Make sure it has a blue thumbtack. The lock-down thumbtacks and delete X symbols appear in the top left and top right, respectively while the mouse is hovering over them.
It is possible to delete a saved site, and it is possible to undo the thumbtack. Simply click the X to delete or click the blue thumbtack to unlock the site and turn the thumbtack black.
You may choose to tack down a few sites and let the remainder float in and out, driven by your browsing history.
Through my use of this approach, I have instant access to my club's web site, two Webmail sites, and some other often-visited places on the Web, all in one start page.
About the only thing I really don't need there is a Google search box, for if I enter my search terms in the address bar I get the same result as if I had specifically typed in the search box.
Some add-ons, often potentially unwanted programs (PUPs), will replace the Firefox about:newtab (address of the New Tab) with eBay, Facebook, Twitter icons among others, and a different search engine. These icons may have a nicer appearance than the default Firefox New Tab, but you may also be looking at extra, unnecessary work for the computer, especially if behind the pretty icons there is a hidden agenda.
Personally, I would stay clear of these add-ons, and perform some scanning with an up-to-date antivirus and antimalware software.

If this is not a pinned (App) tab then the home page should open in that tab.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I can no longer (since upgrading to the latest firefox) open up multiple tabs of the same page (something I need to be able to do when emailing and referencing multiple emails while writing one email). The only option it gives me is to 'switch to tab'.

Question
I can no longer (since upgrading to the latest firefox) open up multiple tabs of the same page (something I need to be able to do when emailing and referencing multiple emails while writing one email). The only option it gives me is to 'switch to tab'.

I'll try to make this clear. I USED to be able to left click on a hyper link and the hyper link would open in a NEW tab. Now for some unknown reason the hyper link by default opens in the same tab (window). I have to right click the hyper link in order for it to open in a NEW tab. (Yes, my 'tools'> 'options'> 'tabs' are set to "open new windows in a new tab." (Please no answers telling me to get rid of the Ask toolbar because I don't have one.) Thank you.

Clear the home page in presentation side

Hi
how to clear the home page in presentation side
is it possible if i click on home page then it open the dashboard
it is for end user purpose
they need only dashboards and reports
completly clean the home page how to do it

Hi,
Do you want to set the default page when the user logs in to the dashboard instead of Home page ?
If yes, you can do it by clicking on MY Account link and set the start page under the preferences tab to the required dashboard.
Thanks,
Vineeth

Two tabs for the same page

Hello,
I have been spending the whole morning trying to find a solution for this problem but did not find any either by myself or parsing the forum messages.
I am building an application with a two level tab for the navigation.
Everything is fine as long as the pages referenced by the tabs have a different number.
My problem is that i use the same dynamic page (let say 40) to be accessed through two different tabs.
e.g Parent tab is labelled "Parent"
Two other tabs are created linked to parent tab "Parent" and those are labelled "Action1" and Action2"
Selecting "Action1" will result in rendering the page 40 with a parameter (let say page_type) set to the value 1.
Selecting "Action2" will result in rendering the *same* page 40 with a parameter (let say page_type) set to the value 2.
For the parent tab "Parent" let say that the default is to select "Action1"
Is there any solution to implement that kind of behaviour?
I have tried to create redirecting pages (empty page and a single branch) to achieve this but i always get stucked when trying to have page 40 displaying the proper tabs and parent tab.
Thanks in advance for any help.
Daniel

Hi Andy,
Thanks for your answer!
Whilst it is fairly straightforward to create multiple tabs for the same page (this can be done through Shared Components, Tabs and click Add on the standard >>tabs bar, enter in any page number you like), the functionality of tabs does not provide the means to set item values. Additionally, as both tabs would be >>"current" for your page 40, once you've clicked on one, you can not click on the other.Yes this is exactly what i discover once my page 40 has been built.
There may be ways to do what you need, but as tabs are really there for navigation purposes only, this may become rather complicated. What is the difference >>between Action1 and Action2? Can this be achieved in another way? Have you considered switching to lists for navigation (where you can set item values)?In fact, i can still duplicate this page and have a few changes within each new page. But as a matter of code design as both pages have around half in common, i wanted to share most of the items (build a single page) and then play for a few additional items with conditions encompassing the page type i have set before rendering the page.=> Most items in common, a few others whose display is conditionnal. For the end user, it looks like two different pages because in their business process the "Action1" and "Action2" are clearly different.
I use lists in this application on the home page to reach most of the application pages but while some users prefer to use the links on the home page and go back to home page, other would like to use the tabs and a number of them use both navigation mechanisms.
Sorry if it is not quite clear (english is not my mother tongue).
Regards,
Daniel

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I can not open new tabe in the same page

i can not open new tabe im the same page
when i click on new tabe , it donsnt open at all

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

I can not click certain tabs on my Etsy page & they will not open using Firefox, but I am able to open these tabs on Etsy when using Internet Explorer

When I am signed onto Etsy, there are certain tabs on the top of the page that I can not click open when using firefox, but when I use Internet Explorer, I am able to click open these tabs. The following tabs on my etsy page will not open: Your Shop, Your Account, Help, & Sign Out
Other tabs on the same page will let me click them open, such as:
Buy, Sell, Community, Blog, Mobile, when using Firefox & Internet Explorer

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have 5.0 What happened to right-click a tab and the Save as bookmark option?

I have 5.0 What happened to right-click a tab and the Save as bookmark option?

"Bookmark This Page" can be accessed via the right-click context menu of that browser page or via "(Firefox) > Bookmarks > Bookmark This Page".
*https://support.mozilla.com/kb/how-do-i-use-bookmarks

What is the Web Dynpro tab on the portal page?

Newbie here...
I am confused between NDWS and the Web Dynpro tab on the portal page. As I don't have access to either right now, I need to know what is required by a Portal Content Admin to maintain an application. The Basis people do the JCO setup. Those are the only tabs I have seen when using the Web Dynpro tab from the portal, not NDWS. Seeing as I don't have access to either tool, and I have to ask for what I need and I don't know what I need... Been there?
I guess my question is the use of the two tools.
Thanks,
Amy Smith
Haworth, Inc.

Thanks so much for a quick response!
So, the Web Dynpro Content Admin is normally a part of the content admin role. Hmm... I get a "you are not authorized" when I click that tab, even though I can do iViews, etc. and was told I have the content admin role. So if no one edited the rights of the content admin, I should be able to get into Web Dynpro Content Admin tool. Is this so? Is there any special user config, check box, etc in addition to the role?
Is the Dynpro content admin tool useful for content admins or content developers?
My Basis person does not want the content admin to be able to change JCO settings. Is there a way to give the content admin rights to everything in the WDCA except that?
Thanks again. I am a J2EE developer who volunteered to take content admin and content development roles and am trying to figure out what has been done here and what needs to be done. On top of that anyone who has been involved claims "I know nothing..." until I ask specific questions. It's just hard to know what the specific questions are.
I know, training... No money. Sigh... I am good at doing tutorials and reading manuals and experimenting, however, I need access to the right tools and permissions first.
Thanks again.
--Amy Smith Haworth, Inc.

Want to display the workset as tab in the EP Page

Hi all
I have been trying to show the Workset created by me as a tab in the EP Page. As we see "CONTENT ADMINISTRATION", "USER ADMINISTRATION" tabs in the EP page, I want my workset to be displayed as a tab so that I can directly access the workset, the page and the iviews.
Please let me know what settings have to be made to achieve this.
Thanks,
Vijay.

Hi Vijay,
Just to review, can you say exactly what you did to get to the current situation?
What objects did you create (roles, worksets, pages)?
What properties did you set on each?
What roels did you assign to what users/groups?
And can you describe exactly what you do get? Do you see nothing of your roles and worksets, or do you see the roles as the top level but you want the worksets as the top level?
It is a pretty basic task to create a role with a workset with a page, and assign it to a user.
Common mistakes: not assigning entry point to true, not assigning the role to the right user or group.
Daniel

Different Master of Height to match the corresponding page?

In my website I have multiple pages with different height. Should I create alot of Masters with different height to match the corresponding page?

Hello,
You an create a single Mater page.
As you add content to pages, the footer will move down and will expand the height of the page. So there would not be any need of creating multiple master pages.
Regards,
Sachin

Is it possible clear the class loader cache programatically?

Hi,
Is it possible clear the class loader cache programatically?
Thanks

By the cache do you mean the loaded classes? If so, you can do that by discarding any pointer you have to the class loader and creating a new class loader. ...though I wonder why you would need to do that...

How to clear the directory server cache?

How to clear the directory server cache?
we are using the directory server 5.2
Thanks,
Subbu

try asking it here - http://forum.java.sun.com/forum.jspa?forumID=761

iframe link, inside a frameset page, does not go to the new link when left clicked. but just clears the page instead.

Trouble shooting info from my computer attached as requested, but problem exists on other people's computers also, including MACs.
Problem exists only with <iframe> link within a page that is part of a frameset. If page contained within a frameset is accessed directly (ie, show only this frame) then the <iframe> link works normally.
Works ok in Internet Explorer, used to work in Firefox. If RIGHT click on the <iframe> link then select either new tab or new window it works OK.

At first I was ending up opening to the Help page, but finally u sent me instructions that worked. Now my Net connection opens to my Yahoo page.

Click a tab - Clear the Corresponding Page Cache

Similar Messages

Maybe you are looking for