Client can't associate

I've AP 1121G -
here config-
dot11 ssid 354783729734
authentication open
authentication key-management wpa
wpa-psk ascii xxx
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid 354783729734
Client -Cisco PI-21AG configured via Cisco ADU -
selected WPA/WPA@ passphrase.
The client can't associate. in log i see
17: dot11_dot1x_send_ssn_eapol_key: eapol->length 95
*Mar 2 21:31:52.217: dot11_dot1x_build_ptk_handshake: building PTK msg 1 for 0040.96b1.59a5
*Mar 2 21:31:52.317: %DOT11-7-AUTH_FAILED: Station 0040.96b1.59a5 Authentication failed
*Mar 2 21:31:52.317: dot11_auth_client_abort: Received abort request for client 0040.96b1.59a5
*Mar 2 21:31:52.317: dot11_auth_client_abort: No client entry to abort: 0040.96b1.59a5 for application 0x1
Which are the possible reasons of that problem?

The logs clearly indicate that the authentication is failing. Which RADIUS server are you using? And what type of EAP authentication are you using? Has the user database been created on the Radius server? For instructions on configuring WPA on the AP read the document available at http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml

Similar Messages

Windows 8 clients can't associate to Cisco 2125 controller

HI All,
I have 2125 controller with running IOS 7.0.230.0, now unable to connect windows 8.1 laptops.
It is support Windows OS 8.1 wireless clients, you need to upgrade the firmware to 7.0.250.X.. I think windows is latest version are supported or not. kindly confirm.
Thanks & Regards,
Johnson.

Hi Johnson,
Yes, You have to upgrade to your WLC code at least 7.0.235.0 or above if you are hitting this bug CSCua29504.
https://supportforums.cisco.com/document/113836/windows-8-clients-cant-associate-cisco-unified-wireless
HTH
Rasika
**** Pls rate all useful responses ****

How many clients can associate to the AP?

Hi
I need know how many clients can associate for this AP model
AIR-CAP3502I-A-K9
AIR-LAP1131G-A-K9
I have 45 clients currently associated with each AP.
Thanks

I need know how many clients can associate for this AP model
Theoretically, you can have 1098 clients per WAP. However, in practice, this will depend entirely on the type of Wi-Fi traffic being pushed around.
Cisco recommends no more than 25 clients per WAP. But if you are just pushing emails, HTML around then this number can go as high as 35 clients per WAP. If you are pushing HD video, then the number goes down to around 8 clients per WAP.
I have 45 clients currently associated with each AP.
This is too much. Even for a 1131. Take note that, unlike the 3502, the 1131 only has FastEthernet data port. So with 45 clients connected to the 1131, you may have some bottleneck.

Wireless client can't get an IP but can associate with the Cisco 1200 AP

Hi!
Good day to everyone.
I guess i need some help with regards to a problem of mine.
I have a Cisco 1200 AP with IOS 12.3(2), the client is MS Win XP on an IBM notebook with an onboard intel wireless client.
the RADIUS server is a MS IAS and it is integrated with MS Active directory where I authenticate.
somehow the client can associate with WPA and TKIP however it won't receive an IP add after logging into domain. I have tried clearing out the TKIP and WPA and leave authentication open and guest mode on the config. this would be successful.
I also want to ask what does the "list_name" on the methods of authentication on EAP? Is this a RADIUS server's name or the AD server's name?
Attach is the configuration I made on the AP.
Thanks in advance,
Chris

I have this same issue, it seems the AP is not supplying the group key needed to complete the authentiction...so your being authenticated, but not fully with the AP. I have a sniffer of a good connect and a bad one, its got something to do with the key (if you look at the link status, you will probably see something like this beside security
TKIP, WEP, Key Absent
The Key Absent portion is bad. Its whats stopping us from getting fully "connected" with our AP's, but i have yet to figure out why.

How many clients can be connected to an Access Point

Hi friend,
I want to know how many clients can be connected in Cisco AP 1140.
Best Regard,
Marco.

Hi,
As Stephen mention the best answer is it depends.
What you need to keep in mind is that wireless is halfduplex and a shared medium and due to this the bandwith will go down per client.
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Q. How many clients can associate to the AP?
A. The AP has the physical capacity to handle 2048 MAC addresses, but, because the AP is a shared medium and acts as a wireless hub, the performance of each user decreases as the number of users increases on an individual AP. Ideally, not more than 24 clients can associate with the AP because the throughput of the AP is reduced with each client that associates to the AP.

How many clients can use my mac shared connection?

I'm sharing a wired connection wirelessly. What's the limit on client connections? Thanks in advance if you can help.

You may be confused between retrictions that apply in different areas.
You can only authorise 5 computers to use a single ID.
You can only associate 10 devices with a single ID.
Associated devices include your authorised computers, thay also include mobile devics that use iTunes Match or automatic download from the cloud.

How can i associate a template with my message,

hi,
how can i associate a template with my message only.
where is the location of templage file?
thanks in advance.
zam_ora

hi,
i found out system Mailer item type and messages.
so i hople , i could take a copy of the template message and modify and associate with my notification , right?
but how i know , which template my notification is currently using.?
we are using Outlook as email client.
thanks.
zam_ora

How do I put text into an Edge File that clients can edit easily afterwards

Hi
Can anyone explain how I can put text into an edge file (styled with google fonts) and make it so that clients can access the text and update the text as they require?
Previous suggestion was dynamically loading a .txt file - any instructions would be most appreciated.
Thanks.

Hi Resdesign!
Your code is very useful to learn how to use Json in Adobe Edge Animate!
But I have a question: why you use ( i ) as argument of the function UpdateInfo and when you recall it you use ( index )?
$.getJSON('slides.json', function(data){
          //for(var i=0; i<data.length; i++){
function updateInfo(i){
                    sym.$("photo").css({"background-image": "url('"+data[i].image+"')"});
                    sym.$("pillar").html(data[i].pillar);
                    sym.$("what").html(data[i].what);
                    // position
          index = -1;
          sym.$("btn").click(function(){
          index++;
                    if (index>=5){
                              index = 0;
          updateInfo(index);
Many thanks for your attention!
Davide

Server 2003 VPN clients can't verify username and password

Hi,
Hoping someone can help or point me in the right direction. I have a Windows Server 2003 R2 standard SP2 running RRAS. It has Dual NIC's and is configured for PPTP VPN. I am using a BT Business Hub 5 for internet access and using the BT Static IP service.
The BT Hub assigns the static IP address chosen to the Server using DHCP. The firewall is configured to port forward PPTP traffic to the 2003 server. This all works correctly.
The 2003 server is on a domain where the DC is a 2008 R2 server. The DC also acts as the DNS and DHCP for the network.
The default gateway for the domain is pointed towards our WinGate proxy server which also acts as a DNS server.
The 2003 server LAN NIC is configured manually, usually I would not configure a deafult gateway on the LAN NIC as the WAN NIC needs the default gateway for the BT Hub.
The problem I am having is if a default gateway is configured on the LAN NIC, I can connect to the VPN and it will logon to the network. Once connected everything works ok. If the connection drops, when trying to reconnect the client can no longer verify
the user name and password against the domain and the connection is refused.
If I do not have a default gateway configured in the LAN NIC the VPN clients can not verify the username and password for the domain at all and I get RPC failure errors in the event viewer with the source dnsapi.
Once this error occurs the only way I can get the clients to reconnect is to disable the WAN NIC, restart the RRAS service and enable the WAN NIC again.
Any insight will be much appreciated.

Hello,
for Networking configuration questions better ask in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home#forum=winserverNIS&filter=alltypes&sort=lastpostdesc&content=Search
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

VPN Clients can't access internal LAN

Hello - I have seen a few other threads on this issue, but can't seem to fix mine. I have a PIX 506e. My VPN clients can connect, they get a DHCP address from our internal server no problem. But the clients can not ping me or anything else on the LAN. The clients are connecting ipsec. I know I must be missing something simple here. Here is my config. Any help would be great

Change the VPN Pool address to something else for example 192.168.10.0/24 etc. Then try and let me know. There could be ip overlap here.

VPN clients can't see network resources unless Firewall is disabled.

If the firewall is turned off, connected VPN clients can access other PCs over the VPN. But I would like to enable a rule that allows them to access computers even with the firewall turned on. I just don't know what the rule should be.

Hi,
Any update? If you could update us at your convenience that would be wonderful.
Regards
Yolanda Zhu
TechNet Community Support

10.5: VPN clients can't connect to each other

Hey all,
I've got a bit of an odd problem. Got my VPN server setup and working fine on 10.5.4. Clients can connect in, mount file shares, etc. However, if we have multiple clients connected in via VPN, they can't connect to each other. They can't ping each other or anything. I've checked firewalls, etc, on the client machines, and everything looks fine.
Machines within the network can ping and connect to them both, it's just when they're trying to connect to one another that the problem occurs. Any ideas why this might be, and any possible solutions?
Thanks in advance,
Paul

OS X Server / VPN /The L2TP-VPN server did not respond

Intermittent Internet Connection and VPN clients can't ping internal LAN but connected after installating cisco ASA5512x

Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.

I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA.

Vpn client can access internet but cannot access internal network

I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....

enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80

How can I associate 2 appleids with one account or use a different Appleid for imessage as described in another post?

How can I associate 2 appleids with one account or use a different Appleid for imessage as described in another post?
I have rejoined the iPhone community, not with one iPhone but with two. My wife agreed to move from the unenlightened!
I have set up both under my apple account and want to keep it that way. But I do not want iMessages going to both phones. I would like separate message queues but share all apps and other purches from the store.
I have created a separate AppleID for her but under Settings>Message>Receive At (it currently says 2 addresses) > ... will not allow me to change the current eMail address and when I add hers (her appleid) it errors out. The only thing I can do in the Apple ID field is to manage my account and not change it to hers.
How can I have 2 iPhones (and my iPad) on the same account but have separate identies?
Thanks,
LpGrumpy

1. Yes. Restart with the Option key held down as needed.
2. No, it won't be a problem.
(83373)

Client can't associate

Similar Messages

Maybe you are looking for