Client copy question - Overwrite an existent client...?
Hi gurus,
I want to know if there is a problem to do a client copy over on a existent client, this is, now I have to do a client copy from 300 to 400 but the client 400 exists in the system, and I want to know if it´s possible and is any problem to do this or before this I must delete the client 400 and only after that I can do a copy from 300 to 400...?!
Best regards,
João Dimas - Portugal
Hello,
Everything depends on the size of your target client 400.
If this client contains a lot of data I recommend that you first perform a client delete via SCC5.
Otherwise you risk that your client copy will fail (extend problems, undo problems, ...) or will take too long (because data in 400 also needs to be deleted).
Advantage of deleting the client first is that the actual client copy will go much faster (because nothing needs to be deleted anymore).
Deletes during client copy or client delete often take most of the time, because this is done via non optimized SQL statements like (delete from table where mandt = '400').
There are a lot of SAP Notes to optimize client copies and especially client deletes !
Wim
Similar Messages
-
Remote Client copy: Table does not exist in Nametab
Hi!
We executed a client copy between 2 SAP EHP4 systems.
The both systems are SAP ERP EHP4 systems, but with different Support package.
After the client copy we get the following errors:
Table ADDRC_DELI_SERV does not exist in Nametab
Table ADDRC_DELI_SERVT does not exist in Nametab
Question
How can we solve these errors, maybe to transport the tables?
Thank you!Hi,
I would suggest to synchronize support pack levels between systems and copy it again. You could try to manually define those missing tables, but you need to create them under SAP namespace. later during upgrade you'll probably get some errors. Your issue is why it's not supported by SAP. Have a look at OSS note 70547 with detailed information about client transport.
Cheers -
Hi,
I was going through one of the notes for client export and got a step by step procedure.
Just one confusion is that do I need to create the Client using Transaction SCC4 in source system before starting the export from target system.
Also in the client import step we have to execute the below commands in usr/sap/trans/bin folder
tp addtobuffer PERKTnnnnn <SID> pf=TP_DOMAIN_DER.PFL u18
tp import PERKTnnnnn <SID> client xxx pf=TP_DOMAIN_DER.PFL u18
Please correct if the there any errors in the above statements.
Do I need to execute this statement seperately for the 2 or 3 requests created
What is TP_DOMAIN_DER.PFL .
Thanks
Parvez Khan.Hi Parvez,
You dont need to create the client using trx SCC4. The 'target system' field shown in trx SCC8 is for the systems created in STMS. If you want to export you QA client to your PRD client defined in STMS, just choose this system in SCC8.
Choose the profile you want to use to export your client. Could be for example: SAP_EXBC (cutomizing, master user, clint-independant data).
After you execute the export client, you will have 3 transport transport request orders (you can see the progress of the process with SCC3):
<SID>KO<nnnnn> -> client-independant data
<SID>KT<nnnnn> -> client-dependant data
<SID>KX<nnnnn> -> client-dependant texts
and their corresponding cofiles files...
To import these orders you must follow this order:
1) <SID>KO<nnnnn> -> client-independant data
2) <SID>KT<nnnnn> -> client-dependant data
3) <SID>KX<nnnnn> -> client-dependant texts
For the 1 and 2 you must use these commands:
- tp addtobuffer PERKOnnnnn <SID> pf=TP_DOMAIN_DER.PFL u18
- tp import PERKOnnnnn <SID> client xxx pf=TP_DOMAIN_<SID>.PFL u18
(for each order 1 and 2)
where TP_DOMAIN_<SID>.PFL is the name of your domain profile. You can find it here: <drive>:\usr\sap\trans\bin.
For the 3rd transport request (texts) you can use SCC7.
Hope this helps you, good luck! -
Scheduled Background jobs after Client Copy
Hello,
I've been doing some searching online and I don't seem to be able to find a definitive answer to this question:
Are background jobs client specific?
I've seen some discussions on here say some are and some are not. I've also seen a discussion that says ALL background jobs are client specific.
It's really related to non-SAP background jobs after a client copy.
If I have a client 100 in QA with half a dozen non-SAP standard jobs configured, and I create client 110 in QA and perform a remote client copy from PROD into client 110 on QA, will my non-SAP standard backgrounds run in Client 110, or do I need to set them all up again?
ThanksHello All
If I have a client 100 in QA with half a dozen non-SAP standard jobs configured, and I create client 110 in QA and perform a remote client copy from PROD into client 110 on QA, will my non-SAP standard backgrounds run in Client 110, or do I need to set them all up again?
Yes. You will need to set those non standard jobs in the new client. When you schedule a job there will be a reference to the client where the job will be executed is stored under AUTHCKMAN in the table TBTCO. If the job is scheduled periodically then the job is executed only on the client where it is scheduled.
I used SAP_ALL profile when performing the client copy. So my scheduled jobs WILL have been copied along with everything else? Is that correct?
In SAP_ALL profile the background jobs will be coming from source client not from QA client 100.
No. Background jobs are not transportable and will not be copied during a client copy. Job definitions are client independent.
Read these SAP notes.
31503 - FAQ: Background jobs
51135 - Why are bkgd processing jobs not generally transportable?
If you want to schedule those jobs in the new client the follow the suggestion in the SAP note 3150 point 6.
Regards
RB -
Client copy with different number of tables.
Hi,
I want to do a client copy between Client '100' and Client '200'. There are 121 tables in Client 100 and 101 tables in Client 200. Is the client copy possible. If yes what are the steps.
Another question is. Is the reverse possible ie copying of client 200 (with 101 tables) to Client 100 (with 121 tables). If yes how. And also i would like to know what will be the state of 20 tables( not available in client 100). What i mean is, will these 20 tables become empty(data erased) or will contain the data as was before the client copy.
Regards
NaeemDear Naeem,
Kindly let us know are you doing local client copy or remote client copy . If you are doing client copy then system is on same PS level . If you are doing local client copy just perform test run and find out the differences .If it is remote client copy ,Its better to perform client export and import .
Thanks and Regards,
Arun Kumar -
Can a client be refreshed with client copy?
I created a new client by
doing client copy from client 200 creating client 202
Now I want to refresh client 202 from client 200 (ALL ON SAME SERVER) , can I just re-run the client copy with source client being client 200 to client 202?
If so what am I to expect?
If not, then do I need to first drop client 202 and then do the client copy to re-create the client?
mariaDear Maria,
Greetings!
To be clear, now your situation is to have a client copy from your Production client 200 to the Quality client 202.
Coming to the status of other clients in Quality system, the data or any other settings of the other clients is NOT going to be changed because of this client copy.
As far as the configuration part, you will have to perform the following functionalities in your Target client (Quality - 202)
1. Transaction SCC9 - Select Profile - Choose the SAP profile as per your need.
2. Enter the RFC destination to the Source system client - Production Client 200 - This RFC destination could be an already existing connection between both the systems or a newly created one.
3. Make an RFC system comparison to be sure that the connection is perfect.
4. Set-up the parallel processing parameters, Menu option Goto - Parallel Process. This option is dependent on the physical memory availability of the Quality server.
5. Execute a TEST RUN, prior to start of the actual client copy to verify Target client feasibilities. In case of any mismatch in table definition or table fields corresponding action has to be performed.
Please remember the following pre-requsities before starting the client copy.
1. Both the Source and Target client is to be locked against access to end users or other users. For a pre-caution lock all the users except SAP*, DDIC, TMSADM, BASIS and other System Admin users in both the clients.
2. No auto-logout parameters or restrictions on workprocess runtime exists as profile parameters in the system.
3. Additional space for a client is available in the database so the the client copy in not interrupted.
Kindly process the client copy in a server session such that network interruptions and other interruptions could be avoided.
Kindly revert in case you need further informations on the same.
Thank you
Regards,
Vineeth -
Additional SAP-MI environment via client copy
Hi there. We need to set up an additional SAP-MI environment for UAT (User acceptance test). Can this be done by creating a new client (and using client copy
function) within the existing MI instance?
If so, what are the implications to J2EE engine? Could we use existing
Java stack and just create new JCo connections? Or would we need a new
Java stack? (Standalone or Add-in?).
Also, what are the implications to the back-end R/3 system (if any)?
Used versions:
SAP MI 2.5, SP18
Oracle 9.2.0.6
AIX 5.3
Thanks in advance,
Benjamin de RijkeHi Benjamin,
As per my understanding as of now MI is not available in SIT system.Once MI is avaliable in SIT system, we need to move all the development objects into SIT system from DEV system.
There is an option of transporting all the objects from one system to other(in the same release NWO4 or NWO4S)(If all the development objects like tables,syncbos,bapis etc are stored in a package in DEV system..that package can be transported to SIT system..i am not sure how far it is going to be feasible..but for sure this is a good option you can try...then all the development objects will be present in SIT system and then we can deploy the application and test it)
Other wise if this transport is not possible then we need to re-create all the tables(objects) etc in SIT system same as in DEV system.
We can connect to multiple backend to one MI client..this should be possible.
Hope this is helpful to some extent
Cheers,
Karthick -
Document archived on PRD visible on QAS after a client copy to QAS system
We performed archiving on productive system. We plan to make a client copy to QAS system(sap_all profile)
The system is version 4.7x2(oracle/unix)
We wander if we adjust the archiving paths on QAS system will the archives be visible?
This is also question of archiving infostructures for which I do not know wheter they are client dependent.
Beside only on 4.7 system I noticed a remote client copy profile sap_all with cross client customizing (is this better procedure)Hi Tina,
What we do for accessing archive files in our QA system that had been archived in production is to do a "Retrieve file" in prod for a sampling of files and then FTP the files to the QA archiving file system. Then, go into the Archive Adminstration information and change the File name to "RETREIVED_xxxx" and the Logical path to your designated path name such as ARCHIVE_GLOBAL_PATH_WITH_ARCHIVE_LINK
Once the QA system can see the archive file, the archive information structures will be able to access the data. You would not need to change anything there.
We do it this way so that we can archive new data in the QA system without being concerned about QA archive files being sent to the production archive server.
Hope this is helpful.
Regards,
Karin Tillotson -
Local client copy and Internet
Hi guys,
When i try to do a client copy for my new created client..i get an error SAP* does not exist.
SCCL->SAP_CUST-> client000->sechdule background -> client copy vertification->background Print parameter option comes .. i dnt have any printer connected but if i select a default LP01 its gives an error SAP* does not exist.
Second issue is after installing SAP ecc6 i m not able to connect to internet from the OS( 2003 server) i removed the enhaced security feature but of no use.. i tried changin setting in Internet option but could not connect.
regards
AbhishekHi.
SAP Help is a very good source for info -> [Link|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm].
I suggest that you read the manual carefully. There are many tipps to improve performance (parallel processes) and tipps and tricks to avoid problems. If you need some notes, they are adviced there.
Also the notes [116787|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=116787], [552711|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=552711], [67205|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=67205] or [489690|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=489690] are interesting.
regards,
Martin -
Remote client copy fails.
The error message and info is given below. Help me to proceed.
Client copy
The client copy you started has terminated
Client Copy could not start because of Repository differences
Diagnosis
The table definitions differ between the systems. These differences mean that a copy of the data can cause a data loss and system inconsistencies. Differences occur when further developments were not transported or were copied between different maintenance levels.
Procedure
Transport all the developments of table structures between the systems using the Transport Organizer and bring your system to the same development level.
It is observed that some tables are missing in the target system. How do I copy the table structures to the target system?
Thanks in advanceHello Ashraf,
There are repository differences between you source and traget system.
If you want to get the list of repository differences, then run a RFC check before you execute remote clinet copy.
You have to then remove these repository differences before you start with the remote client copy.
to remove the difference you have to:
"Transport all the developments of table structures between the systems using the Transport Organizer and bring your system to the same development level" as mentioned above
I would recommend you to go for Export / Import rather than Remote client copy.
There are several advantages of export import method over remote clinet copy
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i> -
Hi,
I have performed a remoted client copy of ECP300 to ECQ system using
SAP_ALL Profile and the client copied successfully. After the client
copy some users are complainting that not all data moved over or there
are some major differences. I know the client copy finished but the
users are saying the client copy is not a exact copy of ECP.Are there
any functional or abap post configuration that needs to happen after
this remote client copy? From the client copy logs, it seem like all
the tables got copied over. Please advise as this is very critical.
I have attached 2 issues reported by users and the client copy log with
details. I have also attached the data dictionary differences of the 2
system ECP and ECQ using SCC9 --> RFC SYSTEM COMPARISON.
Target Client 220
Source Client (incl. Auth.) 265
Source Client User Master 265
Copy Type Local Copy
Profile SAP_ALL
Status Successfully Completed
User SAP*
Start on 01/07/2011 / 23:16:01
Last Entry on 01/08/2011 / 03:53:31
Statistics for this Run
- No. of Tables 56787 of 56787
- Number of Exceptions 1
- Deleted Lines 11478
- Copied Lines 152345539
/ISDFPS/CS_EXLST Field Missing Remote IS-DFS-MM /ISDFPS/MM_CS SAP TRANSP Exception List: Overwritten Purchase Requisitions SAPKGED04G
/SAPMP/GT_FDE_T1 Table Missing Remote IS-MP /SAPMP/FAST_DATA_ENTRY_GEN_APP SAP TRANSP IMG: Fast Entry in Trading Contract General Settings SAPK-603DDINECCDIMP
/SAPMP/GT_FDE_T2 Table Missing Remote IS-MP /SAPMP/FAST_DATA_ENTRY_GEN_APP SAP TRANSP Fast Entry in Trading Contract: Transfer from Info Record SAPK-603DDINECCDIMP
AD01DLI Field Missing Remote PS-REV AD01 SAP TRANSP Dynamic items (DI)
ADPIC_MIGO_SET Table Missing Remote IS-AD-MPN ADPIC SAP TRANSP Customizing Settings for MIGO SAPK-603DDINECCDIMP
ADPIC_MIGO_USR Table Missing Remote IS-AD-MPN ADPIC SAP TRANSP Customizing Settings for MIGO SAPK-603DDINECCDIMP
MPDCD Field Missing Remote IS-AD-MPD AD_MPD SAP TRANSP MPD: OBSOLETE - Counter Data for Maintenance Document Items SAPK-603DDINECCDIMP
MPDCUST_DATA_FLG Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP Customising table to store the data container flag SAPK-603DDINECCDIMP
MPDCUST_EFFT_DOC Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP Customising table to store effectivity data for documents SAPK-603DDINECCDIMP
MPDCUST_EFFT_TO Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP Cust. table to store effectivity data from technical objects SAPK-603DDINECCDIMP
MPDCYCLE Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP MPD: Cycle Data for Maintenance Document Items SAPK-603DDINECCDIMP
MPDEFFECT Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP MPD effectivity data SAPK-603DDINECCDIMP
MPDITEM Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP Maintenance Plan Items SAPK-603DDINECCDIMP
MPDPSD Field Missing Remote IS-AD-MPD AD_MPD SAP TRANSP MPD: MPD and MP header data SAPK-603DDINECCDIMP
ADMPN_RBA_CGRP Table Missing Remote IS-AD-MPN AD_MPN_RBA_DDIC SAP TRANSP Check Groups for APO ATP SAPK-603DDINECCDIMP
TMCNV Convertible -> Local CA-GTF-TS BMG SAP TRANSP Data on Material Numbers Conversion
CRFH Field Missing Remote PP-BD-PRT CF SAP TRANSP CIM production resource/tool master data
CKIS Field Missing Remote CO-PC-PCP CK SAP TRANSP Items Unit Costing/Itemization Product Costing
KALM Field Missing Remote CO-PC-PCP CK SAP TRANSP Costing Run: Costing Objects
KEKO Field Missing Remote CO-PC-PCP CK SAP TRANSP Product Costing - Header Data
MLCR Field Missing Remote CO-PC-ACT CKML SAP TRANSP Material Ledger Document: Currencies and Values
VSAFKO_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Order header data for PP orders
VSAFPO_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Order items in PP orders
VSAFVC_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Operation in order
VSAUFK_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Order master data SAPK-603DDINSAPAPPL
VSFPLT_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Billing schedule: Dates
VSPLAF_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Planned order
VSRESB_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Reservation/Dependent requirements
VSRSADD_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Additional fields for reservation
VSVBAK_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Sales document: Header data
VSVBAP_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Sales document: Item data
RSADD Field Missing Remote PS-MAT CN_MAT SAP TRANSP Additional fields for reservation
TCNTM05 Field Missing Remote PS-ST-OPR-NET CN_NET_OPR SAP TRANSP Assignment Components to Groups
AFKO Field Missing Remote PP-SFC CO SAP TRANSP Order header data PP orders
AFPO Field Missing Remote PP-SFC CO SAP TRANSP Order item
AFVC Field Missing Remote PP-SFC CO SAP TRANSP Operation within an order SAPK-603DDINSAPAPPL
AFFW Field Missing Remote PP-SFC-EXE-CON CORU SAP TRANSP Goods Movements with Errors from Confirmations
AFRU Field Missing Remote PP-SFC-EXE-CON CORU SAP TRANSP Order Confirmations SAPK-603DDINSAPAPPL
AFRV Field Missing Remote PP-SFC-EXE-CON CORU SAP TRANSP Confirmation pool
PLPO Field Missing Remote PP-BD-RTG CP SAP TRANSP Task list - operation/activity
STPO Field Missing Remote LO-MD-BOM CS SAP TRANSP BOM item
T414 Field Missing Remote LO-MD-BOM CS SAP TRANSP Explosion Types
CJITO_02 Table Missing Remote IS-A-JIT DI_JITOUT SAP TRANSP Customizing Table for Definition of Tolerances SAPK-603DDINECCDIMP
CJITO_02T Table Missing Remote IS-A-JIT DI_JITOUT SAP TRANSP Text Table to Define the Tolerances SAPK-603DDINECCDIMP
JITOCO Field Missing Remote IS-A-JIT DI_JITOUT SAP TRANSP Call Components JIT Outbound SAPK-603DDINECCDIMP
S2L_GLOBAL_DATA Field Missing Remote IS-A-S2L DI_S2L SAP TRANSP User-specific Save for Global Settings SAPK-603DDINECCDIMP
LFA1 Field Missing Remote FI FBASCORE SAP TRANSP Vendor Master (General Section)
KNKK Field Missing Remote FI-AR-AR FBD SAP TRANSP Customer master credit management: Control area data
VIMI01 Field Missing Remote RE FVVI SAP TRANSP Rental unit - Master data
VIOB01 Field Missing Remote RE FVVI SAP TRANSP Business entities
VIOB02 Field Missing Remote RE FVVI SAP TRANSP Property master data
VIOB03 Field Missing Remote RE FVVI SAP TRANSP Real estate building master
VIOB27 Field Missing Remote RE FVVI SAP TRANSP Relationship between properties and buildings
VIOB38 Field Missing Remote RE FVVI SAP TRANSP Relationship between Real Estate objects and SAP-PS
PEG_TXPT Field Missing Remote IS-AD-GPD GPD SAP TRANSP Pegging: Record of intransit stock in cross plant transfers SAPKGES01G
VEKP Field Missing Remote LO-HU-BF HANDLING_UNITS SAP TRANSP Handling Unit - Header Table
EQUI Field Missing Remote PM-EQM-EQ IEQM SAP TRANSP Equipment master data SAPK-603DDINSAPAPPL
EQUZ Field Missing Remote PM-EQM-EQ IEQM SAP TRANSP Equipment time segment
MHIO Field Missing Remote PM-PRM-TL IPRM SAP TRANSP Call Object from Maintenance Order
MHIS Field Missing Remote PM-PRM-TL IPRM SAP TRANSP Maintenance plan history
EQBS Field Missing Remote LO-MD-SN IQSM SAP TRANSP Serial Number Stock Segment
OBJK Field Missing Remote LO-MD-SN IQSM SAP TRANSP Plant Maintenance Object List SAPK-603DDINSAPAPPL
SER01 Field Missing Remote LO-MD-SN IQSM SAP TRANSP Document Header for Serial Numbers for Delivery
SER02 Field Missing Remote LO-MD-SN IQSM SAP TRANSP Document Header for Serial Nos for Maint.Contract (SD Order)
T377X Field Missing Remote LO-MD-SN IQSM SAP TRANSP Documents Allowed for Serial Number Management
CJIT01 Field Missing Remote IS-A-JIT ISAUTO_JIT SAP TRANSP JIT: Call Control SAPK-603DDINECCDIMP
VLCADDCUST Table Missing Remote IS-A-VMS ISAUTO_VLC SAP TRANSP VELO: Table for VMS additional end customer SAPK-603DDINECCDIMP
AFIH Field Missing Remote PM-WOC-MO IWO1 SAP TRANSP Maintenance order header
AUFM Field Missing Remote PM-WOC-MO IWO1 SAP TRANSP Goods movements for order
AUFK Field Missing Remote CO-OM-OPA KAUF SAP TRANSP Order master data SAPK-603DDINSAPAPPL
CEZP Field Missing Remote CO-PC-OBJ-PER KKPK SAP TRANSP Reporting Points Line Items
CPZP Field Missing Remote CO-PC-OBJ-PER KKPK SAP TRANSP Reporting Points - Periodic Totals Values
PABHD Field Missing Remote PP-KAB LAPA SAP TRANSP JIT call header record
PABIT Field Missing Remote PP-KAB LAPA SAP TRANSP JIT call items
LTAK Field Missing Remote LE-WM LVS SAP TRANSP WM transfer order header
ASMD Field Missing Remote MM-SRV MASB SAP TRANSP Service Master: Basic Data
CHVW Field Missing Remote MM-IM MB SAP TRANSP Table CHVW for Batch Where-Used List
ISEG Field Missing Remote MM-IM MB SAP TRANSP Physical Inventory Document Items
MKPF Field Missing Remote MM-IM MB SAP TRANSP Header: Material Document
MSEG Field Missing Remote MM-IM MB SAP TRANSP Document Segment: Material
RESB Field Missing Remote MM-IM MB SAP TRANSP Reservation/dependent requirements SAPK-603DDINSAPAPPL
MCIPMIS Field Missing Remote PM-IS-REP MCI SAP TRANSP PMIS: Master data characteristics for PMIS before image
MDTB Field Missing Remote PP-MRP-BD MD SAP TRANSP MRP Table
PLAF Field Missing Remote PP-MRP-BD MD SAP TRANSP Planned order
PKHD Field Missing Remote PP-KAB MD05 SAP TRANSP Control Cycle SAPK-603DDINSAPAPPL
TPK02 Field Missing Remote PP-KAB MD05 SAP TRANSP Key for Controlling Control Cycle: External Replenishment SAPK-603DDINSAPAPPL
T459K Field Missing Remote PP-MP-DEM MDPB SAP TRANSP Control table for customer requirements
EBAN Field Missing Remote MM-PUR ME SAP TRANSP Purchase Requisition SAPK-603DDINSAPAPPL
EKBE Field Missing Remote MM-PUR ME SAP TRANSP History per Purchasing Document
EKBEH Field Missing Remote MM-PUR ME SAP TRANSP Removed PO History Records
EKEK Field Missing Remote MM-PUR ME SAP TRANSP Header Data for Scheduling Agreement Releases
EKES Field Missing Remote MM-PUR ME SAP TRANSP Vendor Confirmations
EKET Field Missing Remote MM-PUR ME SAP TRANSP Scheduling Agreement Schedule Lines
EKKO Field Missing Remote MM-PUR ME SAP TRANSP Purchasing Document Header
EKPO Field Missing Remote MM-PUR ME SAP TRANSP Purchasing Document Item
EKRS Field Missing Remote MM-PUR ME SAP TRANSP ERS Procedure: Goods (Merchandise) Movements to be Invoiced
MARA Field Missing Remote LO-MD-MM MG SAP TRANSP General Material Data
MARC Field Missing Remote LO-MD-MM MG SAP TRANSP Plant Data for Material SAPK-603DDINSAPAPPL
MARM Field Missing Remote LO-MD-MM MG SAP TRANSP Units of Measure for Material
MCH1 Field Missing Remote LO-MD-MM MG SAP TRANSP Batches (if Batch Management Cross-Plant)
MCHA Field Missing Remote LO-MD-MM MG SAP TRANSP Batches
MVKE Field Missing Remote LO-MD-MM MG SAP TRANSP Sales Data for Material
T130F Field Missing Remote LO-MD-MM MG SAP TRANSP Field attributes
T134 Field Missing Remote LO-MD-MM MG SAP TRANSP Material Types
MVRA Field Missing Remote LO-MD-MM MGVERS SAP TRANSP Cross-version fields for MARA SAPKGES01G
MVRC Field Missing Remote LO-MD-MM MGVERS SAP TRANSP Cross-version fields for MARC SAPKGES01G
MVRM Field Missing Remote LO-MD-MM MGVERS SAP TRANSP Units of Measure for Material SAPKGES01G
MVVE Field Missing Remote LO-MD-MM MGVERS SAP TRANSP Sales Data for Material SAPKGES01G
MILL_T399X Field Missing Remote IS-MP-PP MILL_PP SAP TRANSP Parameters for Partitioning Order - Order Type SAPK-603DDINECCDIMP
ESLH Field Missing Remote MM-SRV ML SAP TRANSP Service Package Header Data
ESLL Field Missing Remote MM-SRV ML SAP TRANSP Lines of Service Package
RSEG Field Missing Remote MM-IV MRM SAP TRANSP Document Item: Incoming Invoice SAPK-603DDINSAPAPPL
ADRC Field Missing Remote BC-SRV-ADR SZAD SAP TRANSP Addresses (Business Address Services)
VBAK Field Missing Remote SD-SLS VA SAP TRANSP Sales Document: Header Data SAPK-603DDINSAPAPPL
VBAP Field Missing Remote SD-SLS VA SAP TRANSP Sales Document: Item Data SAPK-603DDINSAPAPPL
VBEP Field Missing Remote SD-SLS VA SAP TRANSP Sales Document: Schedule Line Data
VBKD Field Missing Remote SD-SLS VA SAP TRANSP Sales Document: Business Data SAPK-603DDINSAPAPPL
CHVW_INC Field Missing Remote LO-BM VB SAP TRANSP Batch Where-Used List- N:M Assignment for Order
VBRK Field Missing Remote SD-BIL VF SAP TRANSP Billing Document: Header Data SAPK-603DDINSAPAPPL
VBRP Field Missing Remote SD-BIL VF SAP TRANSP Billing Document: Item Data SAPK-603DDINSAPAPPL
KONDH Field Missing Remote SD-MD-CM VKON SAP TRANSP Conditions: Batch Strategy - Data Division
LIKP Field Missing Remote LE-SHP VL SAP TRANSP SD Document: Delivery Header Data SAPK-603DDINSAPAPPL
LIPS Field Missing Remote LE-SHP VL SAP TRANSP SD document: Delivery: Item data SAPK-603DDINSAPAPPL
VALW Field Missing Remote LE-SHP VL SAP TRANSP Delivery Plan: Definition of Route Schedule
KNVV Field Missing Remote LO-MD-BP-CM VS SAP TRANSP Customer Master Sales Data
KNA1 Field Missing Remote LO-MD-BP-CM VSCORE SAP TRANSP General Data in Customer Master
FPLA Field Missing Remote SD-BF VZ SAP TRANSP Billing Plan
FPLT Field Missing Remote SD-BF VZ SAP TRANSP Billing Plan: Dates
TFPLT Field Missing Remote SD-BF VZ SAP TRANSP Date Type for Billing Plan Type
VBSK Field Missing Remote SD-BF VZ SAP TRANSP Collective Processing for a Sales Document Header
VBUK Field Missing Remote SD-BF VZ SAP TRANSP Sales Document: Header Status and Administrative Data
VBUP Field Missing Remote SD-BF VZ SAP TRANSP Sales Document: Item Status
WBHI Field Missing Remote LO WB2B_DDIC SAP TRANSP Trading Contract: Item Data
LFM1 Field Missing Remote LO-MD-BP-VM WLIF SAP TRANSP Vendor master record purchasing organization data
LFM2 Field Missing Remote LO-MD-BP-VM WLIF SAP TRANSP Vendor Master Record: Purchasing Data
ZPPWRKMAP Convertible -> Local BC ZDEV PTANAKI TRANSP PP-012: Work Center Mapping ECDK901192Hi,
What is the volume of data you copied. Also have you followed the best practice of minimal/no activity in the source client.
The dictionary differences seems to be becuase of some SPs not applied in your ECP system yet
Regards,
Sanujit -
Hi Experts,
I have a scenario where in my Source Systems runs on HP-UX,Oracle10G and ECC 6.0 and my Target Systems runs on Windows 2003,Oracle 10G and ECC 6.0 except OS all the SAP and DB versions and Patches are same.
Could you please tell me can i able to do remote client copy( i am sure with client export/import we can do)? does any body done the same before.
Please suggest me on this
Thanks,
LaxmanAs far as i remember Remote Client Copies between different OS is possible... essentially a client copy is a HUGE transport and as far as the SAP versions are the same it should be ok. (please correct me if I'm wrong)
Read
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
and
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24c684ba111d189750000e8322d00/frameset.htm
Regards
Juan -
Can we create a local client copy for the RFID Client in discovery Box
Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not .
This isn't possible with Live Mail. Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.
-
Unable to make the Client Copy
Hi Team ,.
I am trying to make a client Copy after SCCL transaction is performed when we check the status
in SCC3 it's throwing an error
Error :
Client 200 logon locked
Client Copy probably cancelled
The Client could be the source client of a copy
Reset Lock Keep Lock Cancel
Please help
Regards ,
MadhuI went through this Document
Client copy error :
RFC destination for client copy in systems with Financials Basis
(FINBASIS) component.
The system could not find any suitable RFC destination for processing
for client 001.
This note also appears if an RFC destination was found but this does not
work.
o RFC destination: 001
o Error text:
Proceed as follows to eliminate this error:
1. Start the wizard to create a new RFC connection
or perform the following steps manually:
1. Create an RFC destination with the target ZK>source client of client
copy (in this case 001).
2. Check whether the RFC destination works in transaction SM59.
To avoid errors when assigning the password or the authorizations of
the RFC user, use the authorization test Test -> Authorization.
3. Enter the RFC destination:
- Transaction: FINB_TR_DEST (Destinations for Transport Methods of
the Financials Basis)
- Client: 001
4. Start the client copy again.
SOLUTION:
Login to client 001
Go to sm59, create rfc connection type 3, give the rfc destination : FINBASIS_001
Logon and security--> give user id and password (of any user in client 000)(user should be a service user or communication user so as to avoid password lock situation)
Check Test connection: test ---à authorization test.
Login in to new client: 800
Run the tcode: FINB_TR_DEST
Click on new entries:
Give the client: 001 and destination as FINBASIS_001 and save .
Run Tcode: sccl
Source: 001
Target: 800
Run as background job. Go to sm37 & check the status. -
Hi Team,
We got a problem during client import because of the transaction log being full.We observe that the transaction log space in initially at 95 % free but when we start the import job its keep on growing drastically and reaching its maximum available size before the import completes.
Is there any way to switch off the transaction log temporarily during the import job ? we are running on SQL 2005 , ECC 6.0.
I got following command from some forum ( sp_dboption QAS, 'trunc. log on chkpt', false )
(sp_dboption QAS, 'trunc. log on chkpt', true* )*
which says these SQL queries would switch off the changes recording on to transaction log. i dont know whether this would work on SQL 2005. Please let me know the way to fulfill my requirement.
Any quick replies would much appriciated. Please help me to fix this issue.
Thanks & Regards,
VinodHi Topquark,
Thanks for the information.
what you said was true..simple recovery model did not help us to switch off the logging in SQL server 2005. We do not have any past experince as we are performing the client copy activity first for our client. We have around 17.5 GB free space available at file system for transaction log directory.
we have autogrowth enabled and set to 50MB. Production client export job was sucessfull( it is aroung 5.4 GB export copy) when we start the import job intially it is 98 % free however it was running fine for some after that it started increasing and occupying all free space before import job completes.Hence job fails due to insufficient free space.
In normal circumstances log file growth was normal. I have exported the histroy of log space couldn't find much info.
We have tried following options to fix this issue but all are went with no sucess.
1) tried with changing database recovery mdel to 'Simple'
2) Shrink the transaction log file and provided 17.5 GB free space.
3) Created addditional transactional log in other disk drive.
Please let us know what do more on this?
Thanks & Regards,
Vinod
Maybe you are looking for
-
Need to change email on Apple ID and don't want to lose all my purchases!
I am trying to get iCloud set up but have an issue with my apple ID. Somehow I managed to get two separate IDs. My original ID, which has all my itunes etc on it is associated with my old email which used to forward to my current email, but no long
-
How can i get on a 3g network in the United Kingdom on my US bought ipad?
Hello, I will be travelling to the UK next week and wanted to know what I need to do to connect to a 3g network in the UK on my American ipad2? Thanks, John
-
Authorization object for vL02N
Hi, I need the Authorization object for the VL02N. My requirement is i need to give authorization for doing PGI in VL02N screen,but the user can only generate the VL02N(no change or modification). How can i control this? pls advice
-
How to keep the layers effects when merging the layers to save a Tif?
I am loosing all my layers effects when I merge all the layers together to save the image in the tif format! How to avoid this lost? Can someone help me? this is very urgent! I have to give the file to the printer for my solo exhibition on tomorrow m
-
Locked buttons at setting app, cannot exit
Hey there! I've been deleting some stuff from my iPhone 4S so I can install the new iOS 7.0. When I give up and decide that I'll end later, it didn't let me go. I've tried pressing all buttons but nothing happens However, it allows me surfing the set