Client copy to another server
I would like to copy client from one server to another server.I beleive i can use client export/import for the copy but my question is that did i need to do any connection between two servers??
Hi Samson,
For an e.g If you are using two system landscape i.e DEV & PRD system .Then perform below steps to maintain TMS in your landscape.
1.On DEV server ---> Use client 000 with user DDIC/<password>.
2.Execute SE06 --> Choose std system installation & perform post installation actions.
3.Execute STMS & maintain/save it as a domain controller.
4.Under STMS --> system overview maintain a virtual system entry for PRD & maintain transport routes
On PRD end:
1.Execute STMS & choose to add in transport domain controller.
Hope this will help you,also you'll get lots of step by step execution material to maintain TMS on internet.
Regards,
Gaurav
Similar Messages
-
Need client copy of production server in quality server
Hi,
I need the client copy of production server with application data in quality server. How i do this?
Main purpose is we have no data in quality server in testing purpose. if we configure the client of production server in Quality, we can test it by our requirement.
Regards
SomuTry this
Preparatory steps in source SAP system
1 Take the trace of control file in the source system using the following command at SQL prompt as below:
SQL>alter database backup controlfile to trace;
The trace file can be found in the location <drive>\Oracle\<SID>\saptrace\usertrace.
2. Open the file with notepad and save a copy as controlsrc.txt
3. Stop the SAP
4 Shutdown the database from SQL prompt.
5. Take backup of database files.
6. Start SAP
Steps in the Target system
7. Install SAP system with <TGTSID>
8. Stop the SAP.
9. Shutdown the database from SQL prompt.
10. Take the backup of database files.
11. Edit controlfilesrc.txt with regard to the locations of datafiles of source system to be placed in target system taking in to account the space available in different drives and save as control.sql. Also SET DATABASE u201C<TGTSID>u201D RESETLOGS.
12. Replace the database files with source systems database files conforming to the control.sql
13. Start the database in nomount state from SQL prompt as below.
SQL>startup nomount
14. Run the control.sql script as follows:
SQL>@@<location of directory>\control.sql.
Once the script runs successfully, the database will be in mount state
15. Open the database with resetlogs option as follow:
SQL>alter database open resetlogs;
16. Create OPS$ users of source system conforming to target system conventions in database.
17 Set the environment variable dbs_ora_schema to SAP<SRCSID> as the owner of the database objects will still be as SAP<SRCSID>..
18. Start SAP.
Lalit Kumar -
Portal not starting after a copy on another server
We have copy our development portal to another server. We are working
on a EP 6.0 SP2 Patch4 on a WAS 6.20.
The j2ee engine is working correctly but the dispatcher can not start.
The error message is "Service Unavailable 503! Initialization of
Dispatcher failed" when we try to connect the irj part.
It can come from the LDAP connection and we want to break that link.
Help will be appreciated.
Please find an extract of the log:
Caused by: java.lang.NullPointerException
at com.sapportals.portal.prt.service.usermanagement.UserManagementService.scanpcd(UserManagementService.java:693)
at com.sapportals.portal.prt.service.usermanagement.UserManagementService.scandir(UserManagementService.java:737)
at com.sapportals.portal.prt.service.usermanagement.UserManagementService.readPCD(UserManagementService.java:1090)
at com.sapportals.portal.prt.service.usermanagement.UserManagementService.init(UserManagementService.java:220)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:678)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:464)
at com.sapportals.portal.prt.core.service.ServiceManager.get(ServiceManager.java:163)
at com.sapportals.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:132)
at com.sapportals.portal.prt.service.license.LicenseService.init(LicenseService.java:94)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:678)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:519)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:875)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startCoreApplications(PortalAppBroker.java:1360)
at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:345)
at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
at com.sapportals.portal.prt.dispatcher.PortalInitializer.(ServletsAndJspImpl.java:200)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspServerFrame.start(ServletsAndJspServerFrame.java:125)
at com.inqmy.core.service.application.ApplicationServiceRunner.startFrame(ApplicationServiceRunner.java:55)
at com.inqmy.core.service.container.ServiceRunner.run(ServiceRunner.java:129)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
This is the first service failing to load.
Rémi
Message was edited by: Rémi BLANCHARDHi
I did not use a standard SAP operation. I copy my portal doing these operations:
- copy of /usr/sap + I change the server name + ip adress inside the files
- copy de /oracle
- SIDadm et oraSID users + groups creation
- copy of the .profile files
- copy of java
Regards -
Hi,
I am doing remote client copy from (Development Server - ECD 140) to
our (Sandbox System - E6S 150) and the client copy keeps failing. I get
the below error message. Please advise what is the solution to this
problem? I am also copying the log file of the remote client copy below
Error Message:
Change documents are not copied
3 Tables cannot be converted
Critical differences: Missing tables: 125
Log file of remote client copy below
Target Client
150
Source RFC Dest.:
ECDCLNT140
System Name:
ECD
Client in Source System
140
Copy Type
Remote copy
Profile
SAP_ALL
Status
Cancelled. See Log
User
SAP*
Start on
08.05.2010 / 17:05:18
Last Entry on
08.05.2010 / 17:13:36
Last Action:
RFC DDIC System Comparison
Statistics for this Run
- No. of Tables
0 of 56508
- Copied Lines
0
Warnings and Errors
Table Name
Component
Package
/SAPTRX/EXT_AOT
Table Def. Missing Locally
/SAPTRX/EXT_EE
Table Def. Missing Locally
/SAPTRX/EXT_ETY
Table Def. Missing Locally
/SAPTRX/EXT_EVT
Table Def. Missing Locally
/SAPTRX/EXT_FLD
Table Def. Missing Locally
/SAPTRX/EXT_FLDS
Table Def. Missing Locally
/SAPTRX/EXT_FLDT
Table Def. Missing Locally
/SAPTRX/EXT_PAR
Table Def. Missing Locally
A850
Table Def. Missing Locally
A851
Table Def. Missing Locally
A852
Table Def. Missing Locally
A900
Table Def. Missing Locally
A901
SD-MD-CM
Different Field Names
A902
Table Def. Missing Locally
A903
Table Def. Missing Locally
A904
Table Def. Missing Locally
A909
Table Def. Missing Locally
A910
Table Def. Missing Locally
A911
Table Def. Missing Locally
A912
Table Def. Missing Locally
A933
Table Def. Missing Locally
A935
Table Def. Missing Locally
A942
Table Def. Missing Locally
A943
Table Def. Missing Locally
A944
Table Def. Missing Locally
A945
Table Def. Missing Locally
A946
Table Def. Missing Locally
A947
Table Def. Missing Locally
A948
Table Def. Missing Locally
A949
Table Def. Missing Locally
A952
Table Def. Missing Locally
A953
Table Def. Missing Locally
A954
Table Def. Missing Locally
A955
Table Def. Missing Locally
A956
Table Def. Missing Locally
A957
Table Def. Missing Locally
A958
Table Def. Missing Locally
A961
Table Def. Missing Locally
A962
Table Def. Missing Locally
A963
Table Def. Missing Locally
A964
Table Def. Missing Locally
A965
Table Def. Missing Locally
A966
Table Def. Missing Locally
A967
Table Def. Missing Locally
A981
Table Def. Missing Locally
A982
Table Def. Missing Locally
A983
Table Def. Missing Locally
A984
Table Def. Missing Locally
A985
Table Def. Missing Locally
A986
Table Def. Missing Locally
A987
Table Def. Missing Locally
A999
Table Def. Missing Locally
AFRU
PP-SFC-EXE-CON
Field missing locally
B901
Table Def. Missing Locally
B902
Table Def. Missing Locally
B903
Table Def. Missing Locally
B905
Table Def. Missing Locally
B906
Table Def. Missing Locally
B907
Table Def. Missing Locally
B950
Table Def. Missing Locally
B997
Table Def. Missing Locally
B998
Table Def. Missing Locally
B999
Table Def. Missing Locally
K9RECD1400004
Table Def. Missing Locally
KOTD601
Table Def. Missing Locally
KOTD602
Table Def. Missing Locally
KOTD603
Table Def. Missing Locally
KOTE901
Table Def. Missing Locally
KOTE902
Table Def. Missing Locally
LIKP
LE-SHP
Field missing locally
S001BIW1
LO-LIS-DC
Table has convertible differen
S001BIW2
LO-LIS-DC
Table has convertible differen
Z864DATA
Table Def. Missing Locally
Z864DIRECT
Table Def. Missing Locally
Z864INVOICETYPES
Table Def. Missing Locally
Z864ORDERTYPES
Table Def. Missing Locally
Z864RATES
Table Def. Missing Locally
Z864YENADJUST
Table Def. Missing Locally
ZBJOB_EMAIL
Table Def. Missing Locally
ZCSTMATNRLBL
Table Def. Missing Locally
ZCUSTJULIAN
Table Def. Missing Locally
ZFEDEX_COUNTRY
Table Def. Missing Locally
ZFEDEX_INBOUND
Table Def. Missing Locally
ZFEDEX_OUTBOUND
Table Def. Missing Locally
ZFI_EXCG_CURR
Table Def. Missing Locally
ZGBASE
Table Def. Missing Locally
ZGPRICE
Table Def. Missing Locally
ZHIPVALUES
Table Def. Missing Locally
ZIDOCDSS
Table Def. Missing Locally
ZLABOR_TIME
Table Def. Missing Locally
ZMACH_TIME
Table Def. Missing Locally
ZMM_GIMS_MTART
Table Def. Missing Locally
ZMM_WM_MAP
Table Def. Missing Locally
ZNGK_WORKFLOW
Table Def. Missing Locally
ZPPCRT
Table Def. Missing Locally
ZPPERRORLOG
Table Def. Missing Locally
ZPPEXPIRE
Table Def. Missing Locally
ZPPJOBMAP
Table Def. Missing Locally
ZPPNUM
Table Def. Missing Locally
ZPPWRKMAP
Table Def. Missing Locally
ZPP_COMP
Table Def. Missing Locally
ZPP_EXT_SOP
Table Def. Missing Locally
ZPP_MV_IN
Table Def. Missing Locally
ZPP_MV_OUT
Table Def. Missing Locally
ZPP_OPID_HU
Table Def. Missing Locally
ZPP_SOP_PBCR1
Table Def. Missing Locally
ZPP_SOP_PBCR3
Table Def. Missing Locally
ZPP_SOP_PBCR5
Table Def. Missing Locally
ZQM_CUST_BATCH
Table Def. Missing Locally
ZSD_NAPA
Table Def. Missing Locally
ZSD_PRICE_BLOCK
Table Def. Missing Locally
ZSD_SHPCND
Table Def. Missing Locally
ZSHIPVALUES
Table Def. Missing Locally
ZTABMAINT
Table Def. Missing Locally
ZUPS_COUNTRY
Table Def. Missing Locally
ZUPS_FEDEX_LOG
Table Def. Missing Locally
ZUPS_INBOUND
Table Def. Missing Locally
ZUPS_OUTBOUND
Table Def. Missing Locally
ZWMPACK2LABEL
Table Def. Missing Locally
ZWM_CUST_HU
Table Def. Missing Locally
ZWM_HU_HDR
Table Def. Missing Locally
ZWM_HU_ITEM
Table Def. Missing Locally
ZWM_IB_GR
Table Def. Missing Locally
ZYA1
Table Def. Missing Locally
ZYA2
Table Def. Missing Locally
ZYA3
Table Def. Missing Locally
ZYA5
Table Def. Missing Locally
ZYADDER
Table Def. Missing Locally
ZYATYPES
Table Def. Missing Locally
ZYAVG
Table Def. Missing LocallyI ran the report "RSCLICHK" on the target client and below are the results. There are some table differences. How do i syncronnize the tables so that i can successfully complete the remote client copy? Do i make the table changes on the source system or the target system? I was also told that the table changes will take days to complete. What is the most efficient way to syncronize the tables?
AFRU Field Missing Local PP-SFC-EXE-CON CORU SAP TRANSP Order Confirmations SAPK-603DDINSAPAPPL
S001BIW1 Convertable LO-LIS-DC MCS SAP TRANSP S001BIW1 * SIS: Customer Statistics
S001BIW2 Convertable LO-LIS-DC MCS SAP TRANSP S001BIW2 * SIS: Customer statistics
A901 Fields Missing <-> SD-MD-CM VKOK VLOVELACE TRANSP Sales org./Distr. Chl/Division/Cust.group/PH2/Price grp/Pric
LIKP Field Missing Local LE-SHP VL SAP TRANSP SD Document: Delivery Header Data SAPK-603DDINSAPAPPL
/SAPTRX/EXT_AOT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_EE Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_ETY Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_EVT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLD Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLDS Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLDT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_PAR Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
A850 Table Missing Local SD-MD-CM VKOK TRANSP
A851 Table Missing Local SD-MD-CM VKOK TRANSP
A852 Table Missing Local SD-MD-CM VKOK TRANSP
A900 Table Missing Local SD-MD-CM VKOK TRANSP
A902 Table Missing Local SD-MD-CM VKOK TRANSP
A903 Table Missing Local SD-MD-CM VKOK TRANSP
A904 Table Missing Local SD-MD-CM VKOK TRANSP
A909 Table Missing Local SD-MD-CM VKOK TRANSP
A910 Table Missing Local SD-MD-CM VKOK TRANSP
A911 Table Missing Local SD-MD-CM VKOK TRANSP
A912 Table Missing Local SD-MD-CM VKOK TRANSP
A933 Table Missing Local SD-MD-CM VKOK TRANSP
A935 Table Missing Local SD-MD-CM VKOK TRANSP
A942 Table Missing Local SD-MD-CM VKOK TRANSP
A943 Table Missing Local SD-MD-CM VKOK TRANSP
A944 Table Missing Local SD-MD-CM VKOK TRANSP
A945 Table Missing Local SD-MD-CM VKOK TRANSP
A946 Table Missing Local SD-MD-CM VKOK TRANSP
A947 Table Missing Local SD-MD-CM VKOK TRANSP
A948 Table Missing Local SD-MD-CM VKOK TRANSP
A949 Table Missing Local SD-MD-CM VKOK TRANSP
A952 Table Missing Local SD-MD-CM VKOK TRANSP
A953 Table Missing Local SD-MD-CM VKOK TRANSP
A954 Table Missing Local SD-MD-CM VKOK TRANSP
A955 Table Missing Local SD-MD-CM VKOK TRANSP
A956 Table Missing Local SD-MD-CM VKOK TRANSP
A957 Table Missing Local SD-MD-CM VKOK TRANSP
A958 Table Missing Local SD-MD-CM VKOK TRANSP
A961 Table Missing Local SD-MD-CM VKOK TRANSP
A962 Table Missing Local SD-MD-CM VKOK TRANSP
A963 Table Missing Local SD-MD-CM VKOK TRANSP
A964 Table Missing Local SD-MD-CM VKOK TRANSP
A965 Table Missing Local SD-MD-CM VKOK TRANSP
A966 Table Missing Local SD-MD-CM VKOK TRANSP
A967 Table Missing Local SD-MD-CM VKOK TRANSP
A981 Table Missing Local SD-MD-CM VKOK TRANSP
A982 Table Missing Local SD-MD-CM VKOK TRANSP
A983 Table Missing Local SD-MD-CM VKOK TRANSP
A984 Table Missing Local SD-MD-CM VKOK TRANSP
A985 Table Missing Local SD-MD-CM VKOK TRANSP
A986 Table Missing Local SD-MD-CM VKOK TRANSP
A987 Table Missing Local SD-MD-CM VKOK TRANSP
A999 Table Missing Local SD-MD-CM VKOK TRANSP
B901 Table Missing Local SD-MD-CM VKOK TRANSP
B902 Table Missing Local SD-MD-CM VKOK TRANSP
B903 Table Missing Local SD-MD-CM VKOK TRANSP
B905 Table Missing Local SD-MD-CM VKOK TRANSP
B906 Table Missing Local SD-MD-CM VKOK TRANSP
B907 Table Missing Local SD-MD-CM VKOK TRANSP
B950 Table Missing Local SD-MD-CM VKOK TRANSP
B997 Table Missing Local SD-MD-CM VKOK TRANSP
B998 Table Missing Local SD-MD-CM VKOK TRANSP
B999 Table Missing Local SD-MD-CM VKOK TRANSP
K9RECD1400004 Table Missing Local CO-PA KEG0 TRANSP
KOTD601 Table Missing Local SD-MD-CM VKOK TRANSP
KOTD602 Table Missing Local SD-MD-CM VKOK TRANSP
KOTD603 Table Missing Local SD-MD-CM VKOK TRANSP
KOTE901 Table Missing Local SD-MD-CM VKOK TRANSP
KOTE902 Table Missing Local SD-MD-CM VKOK TRANSP
Z864DATA Table Missing Local ZDEV TRANSP
Z864DIRECT Table Missing Local ZDEV TRANSP
Z864INVOICETYPES Table Missing Local ZDEV TRANSP
Z864ORDERTYPES Table Missing Local ZDEV TRANSP
Z864RATES Table Missing Local ZDEV TRANSP
Z864YENADJUST Table Missing Local ZDEV TRANSP
ZBJOB_EMAIL Table Missing Local ZDEV TRANSP
ZCSTMATNRLBL Table Missing Local ZDEV TRANSP
ZCUSTJULIAN Table Missing Local ZDEV TRANSP
ZFEDEX_COUNTRY Table Missing Local ZDEV TRANSP -
Inconsistant transport requests after local client copy
Dear experts,
our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basic setup and cleanup in the new client, but I'm confronted with problems like objects being locked in orders/requests that cannot be changed in the new client, as they belong to the original source client.
How can I get rid of those inconsistencies? I'd preferred the new client without transports and without locked objects. Is it really necessary that I clean up this mess manually? Would it have been better to clean this up before the client copy? Or could we just do the client copy with another profile in order to avoid those problems?
Thanks for your appreciated help
AndreasHello,
Transports are NEVER part of a client copy.
In fact all the data of your transports is stored in tables that are client independent (E07* tables).
This means that you can view (not edit) always all transports from all clients in a specific system.
When you want to edit or release a transport the source client is important (in which client was the transport originally created).
This is stored in table E070C for all transports and can not be overruled.
So I recommend that you don't clean anything related to transports after a client copy because this will also impact the other clients !
Success.
Wim -
Can a client be refreshed with client copy?
I created a new client by
doing client copy from client 200 creating client 202
Now I want to refresh client 202 from client 200 (ALL ON SAME SERVER) , can I just re-run the client copy with source client being client 200 to client 202?
If so what am I to expect?
If not, then do I need to first drop client 202 and then do the client copy to re-create the client?
mariaDear Maria,
Greetings!
To be clear, now your situation is to have a client copy from your Production client 200 to the Quality client 202.
Coming to the status of other clients in Quality system, the data or any other settings of the other clients is NOT going to be changed because of this client copy.
As far as the configuration part, you will have to perform the following functionalities in your Target client (Quality - 202)
1. Transaction SCC9 - Select Profile - Choose the SAP profile as per your need.
2. Enter the RFC destination to the Source system client - Production Client 200 - This RFC destination could be an already existing connection between both the systems or a newly created one.
3. Make an RFC system comparison to be sure that the connection is perfect.
4. Set-up the parallel processing parameters, Menu option Goto - Parallel Process. This option is dependent on the physical memory availability of the Quality server.
5. Execute a TEST RUN, prior to start of the actual client copy to verify Target client feasibilities. In case of any mismatch in table definition or table fields corresponding action has to be performed.
Please remember the following pre-requsities before starting the client copy.
1. Both the Source and Target client is to be locked against access to end users or other users. For a pre-caution lock all the users except SAP*, DDIC, TMSADM, BASIS and other System Admin users in both the clients.
2. No auto-logout parameters or restrictions on workprocess runtime exists as profile parameters in the system.
3. Additional space for a client is available in the database so the the client copy in not interrupted.
Kindly process the client copy in a server session such that network interruptions and other interruptions could be avoided.
Kindly revert in case you need further informations on the same.
Thank you
Regards,
Vineeth -
During client copy tabels missing
hello,
while client copy from production server to quality server , error occured tables missing . plz help me.
regards
mohsin
+919867577675Hi,
If you perform remote client copy ABAP dictionaty objects are not copied.
So, before you perform such copy ensure that both systems are consistent (SUPPORT PACKS + ALL CONFIG TRANSPORTS MUST BE EQUAL).
Compare in ABAP dictionary (se11) of both systems if the missing tables exist and if they are active.
If there is table on source system and is missing on target : look for transport which contains this table and apply it to target setrver.
Regards,
Wojtek -
How to copy file to another server from database using FTP in oracle
How to copy file to another server from database using FTP in oracle.
Please do the needfaul.Billy Verreynne wrote:
BluShadow wrote:
Not to mention that some FTP servers can return more than one return message per operation whereas others may return one message for the same operation.I had the problem using the LIST command to determine if a file exists on the server. Cannot be determined via the FTP server's return code. Which means parsing and checking the text response from the server to the command. And this vary from server to server.
But the basics were quite easy to code. The entire package is 500 lines, includes comments and blank lines for formatting, and supports the basic FTP client command set. Not really a complex piece of software to write - but I found that many developers seem to think that writing network socket software is complex. Not really the case...Mine's a big larger, but incorporates functionality similar to what Chris provided in his, such as being able to use SQL to query a remote file using pipelined functions, or functionality to write the results of a query directly to a remove file.
:) -
hi guru
how can user copy from another client
thanksRajesh,
If you are looking for copying users on same server to another client, please follow the below steps:
Logon to target client.
Execute Tcode SCCL. In SCCL choose source client and choose profile SAP_UONL.
Now select "Schedule as a background job"
This will copy only users to your target client.
Thanks
LK -
We have installed RM client in the POC server .
Installed Deployment Agent in Dev server .
We created Configuration stages for POC->Dev.
We created a template with x copy deployer and selected source as build definition.
While releasing we faced following issue ,
The release was success in POC (Where RM client is installed), but in DEV environment (Which is different server)it got rejected because of the error
"Package location(Path) does not exist or deployer user does not have access"Hi Dhamayandhi
There is quite a bit to do to get RM working successfully. I have a soup-to-nuts guide on implementing continuous delivery with TFS and RM
here.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn: -
Needed to copy the share from one server to share in another server
Hi ,
Needed to copy the data from one share named as xyz in the server 1 to the another share abc in another server 2.
Share xyz data should be copied to the share abc which has already different data in it .We need to copy all the data from the share xyz to the share abc without deleting any existing data in the destination share.
I know that /MIR option will replace the destination same as source
Can anybody help us in the Robocopy command & switches for this activity?
Any help is greatly appreciated!
Thanks & Regards S.Swaminathan Live & let others live!!!Hi Mandy,
Thanks for your reply.
I have done many robocopy for the share movements from the one server joined in a domain to another server joined in the same domain.In that instances, the destination server will not be having any share of the old server name and just I robocopy the share
from the old server to the new server after creating a new share .The usual command is as follows:
"\\server1\oldshare" \\server2\newshare" *.* *.* *.* /ZB /E /COPY:DATO /XJ /R:0 /W:0 /TEE /dcopy:T /NP /log:c:\robocopy.txt
And after the copy , during the cutover of the standalone DFS pointing to the new share , the domain users in the corresponding access groups (name of the groups based on the old server name) of Full,Modify,Read will be appropriately copied to the respective
new groups (name of the groups based on the new server name) of the new share and the access is ensured by the users.
But in this case , the destination server is already having a share with existing data in it and to be added with the old share data
My question is shall I use the same command as before by copying all the data to the newly created subfolder inside the existiing destination share through the following command
"\\server1\oldshare" \\server2\newshare\new sub-folder" *.* *.* *.* /ZB /E /COPY:DATO /XJ /R:0 /W:0 /TEE /dcopy:T /NP /log:c:\robocopy.txt
You have already mentioned /E without purge options will do.
Just asking one more time for the safer side
Thanks & Regards S.Swaminathan Live & let others live!!! -
How to assign values to server group when you parallelly client-copying
Hello all,
I'm now trying to create server group.
Currently, I use serial process, or default settings, when client-copying.
But I want to implement this in parallel processes.
Due to this, I have to create server group and assign a lot of values to something I don't know!
I want to create a server group, but don't know how to assign values to ones like "Max. requests in queue", "Max. no of logons" and so on.
Could you please advise me how to allocate values to the resourses shown below;
Advanced : 1 *I think "1" is the flag for advanced settings
Max. requests in queue
Max. no. of logons
Max. disp. of own logon
Max. no. of WPs used: *should be the total of SM50, I guess
Min. no. of free WPs
Max. no. of comm. entries
Max. wait time
thanks in advance,
HozyHi,
Would you check this [Parallel Processes |http://help.sap.com/saphelp_sm32/helpdata/EN/e8/df959834ac11d586f90000e82013e8/frameset.htm] and [Parallel processes FAQ|http://www.saptechies.com/ccinfo-parallel-processes-faq/] i hope will get some hint.
Regards
Mohan Rao -
Client Copy and Configuration of Integration Server
Hi All,
We have PI 7.0 DEv(ABAP and JAVA) system installed on AIX 5.3 and configured client 150 as Integration Server.
Further we have an requirement for two more clients to be created by client copy
For example : Say 160 as Unit test and 170 for X.
1) Now my question is do we have to do a client copy with 150 as source or 000.
2) Once the client copy is done do we have to Configure these clients 160/170 as Interation Server (Is it Possible to configure multiple client as Integration server in one system) or as Application system.
Cheers
Deepuhi,
>2) Once the client copy is done do we have to Configure these clients 160/170 as Interation Server (Is it Possible to configure multiple client as Integration server in one system) or as Application system.
no it is not possible to have more then one integration server (XI)
on one server
you need a new server if you want test environment etc.
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ -
Copy the Function Module one server to another server
Hi Guy's,
Please help me How to copy the Function module from one server to another server.
Present requirement is like this, copy the FM from DRH-100 to NRH-100.
Thanks and Regards,
Saiif it is a zfm, u might have assigned a TR when cretaing this FM.so u need to relese this TR to the desired system.contact ur BASIS for the transport lanscape.
if it is a standard FM, u better copy this FM to a ZFM and make it as RFC enabled if it is not RFC enabled and call this ZFM from the system in which want to call this FM by giving the logical system id in the destination while calling this FM. -
How to copy module pool prog one server to another server
hi Experts,
hi how to copy the module pool prog(mpp) one server to another server , like download and upload , in this i have 10 screen pbo , pai, includes , , in this mpp
will have other tcodes also ..
is this possible , if yes how give me step by step process
pls do help me in this requirment .
thanks in advance ,
m venuDo you have the ability to import a transport into your second server? The easiest way to accomplish this is to create a Transport Request in your originating system, release the transport, and have you basis admins import it into the second server.
Regards,
Chris H.
Maybe you are looking for
-
Hyperlink on a trigger won't open in a new window
I have set up a roll over trigger that reveals a target and it works great. The only issue is that the hyperlink I have assigned to the trigger will only work if I uncheck the "open in a new window or tab" box. If I check that box, nothing happens wh
-
TDM Importer in Excel 2003 does not appear in the COM Add-In Menu
I have a program that will create a TDMS file with the data, and after execution is complete, I would like to import the data into Excel and manipulate it using a macro. I can import the file manually and run the macro by opening a second file contai
-
Payment Information on webtools
Hi All, I am new to webtools. I need to know how the payment information is passed to SAP. If an online customer already paid by credit card, Is this transaction posted as a Sales Order?... or Invoice?. How is the logistics process por an online orde
-
Post installation steps after SAP BW system copy
Hi! I am about to do post processsing steps after system copy of SAP BW system. 1) One of the steps is to delete all entries from tables DBSTATHORA, DBSTAIHORA, DBSTATIORA, DBSTATTORA. Question: what is the way to do this? 2) During the installation
-
I am trying to use SQL developer (Oracle 11g) When I select the java.exe file it gives me error 'cannt find J2SE SDK installed at path (path of java.exe'