Client Copy and Configuration of Integration Server

Hi All,
We have PI 7.0 DEv(ABAP and JAVA) system installed on AIX 5.3 and configured client 150 as Integration Server.
Further we have an requirement for two more clients to be created by client copy
For example : Say 160 as Unit test and 170 for X.
1) Now my question is do we have to do a client copy with 150 as source or 000.
2) Once the client copy is done do we have to Configure these clients 160/170 as Interation Server (Is it Possible to configure multiple client as Integration server in one system) or as Application system.
Cheers
Deepu

hi,
>2) Once the client copy is done do we have to Configure these clients 160/170 as Interation Server (Is it Possible to configure multiple client as Integration server in one system) or as Application system.
no it is not possible to have more then one integration server (XI)
on one server
you need a new server if you want test environment etc.
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Similar Messages

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to configure the Integration Server Settins?

Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
Mohan

Hi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV

Error CIM_ERR_FAILED - Configure the integration server for sld

Hi,
I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Someone help me?
Regards,

The version is 7.0. I skip this step and finished with sucess. No run the step:
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Cancelled
PI_01_This template checks if the necessary services are started Cancelled
PI_05_This wizard will configure the integration server for sld Incompletely executed
These steps are with the same error.
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement

Client Copy and System Restore query

Dear All,
I have few major doubt regarding client copy and system restor.
1. In my Quality system there are 2 clients: 100 and 200.In my PRD there is only 1 client 300(other than the standard default clients). My doubt is during remote client copy with SAP_ALL profile from PRD to QUA why the space increases only in MB.
I have been asked the same question by my management. They are saying PRD is 300GB and QUA is 220GB then why the space increases in MB though all data is copied in client 200(QUA) from client300(PRD)
2. If I delete client why the space is released in MB. Because according to them it should be in GBs.
3. Now my third query is I have to restore PRD backup in QUA.So I said that this requires same <SID> and Same sapce in the sapdatafiles(OS is HP-UX 11.31 and DB is Oracle 10g).So I have to explain them why these two things are contradary to each other. In case of client copy space required is only in MB and in case of System restore of PRD in QUA sapce require is in GBs.
Your suggestions will be highly obliged.
Regards,
PG

1. In my Quality system there are 2 clients: 100 and 200.In my PRD there is only 1 client 300(other than the standard default clients). My doubt is during remote client copy with SAP_ALL profile from PRD to QUA why the space increases only in MB.
Response > Because during client copy your customizing and other objects are copied.
The database structures,tables etc are already present.
2. If I delete client why the space is released in MB. Because according to them it should be in GBs.
Response > Since client deletion is not same as deleting database /customizing tables .If you delete complete dataspaces/tables then there will be sizeable difference.Similar logic as Response 1
3. Now my third query is I have to restore PRD backup in QUA.So I said that this requires same <SID> and Same sapce in the sapdatafiles(OS is HP-UX 11.31 and DB is Oracle 10g).So I have to explain them why these two things are contradary to each other. In case of client copy space required is only in MB and in case of System restore of PRD in QUA sapce require is in GBs.
Response > Since in a system copy you will copy data files (which includes tables,and all otehr strucutres ) hence the size required will be similar to PRD.

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

Hi,
Edge role is design for perimeter networks, to keep security risks minimum. So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
Thanks.
MachPanel - Premium Cloud Automation Solution

How to install and configure NI Visa Server without having to install MAX?

Hi,
I need to install NI Visa Server on a computer so that remote systems can connect to the devices connected to it. However, the flash-drive on the computer is marked as "removable media" by the operating system which is causing the MAX installer to error out (this is a known problem with standard windows installers and removable media).
Before pursuing a hardware change, I was wondering if there was a way to install and configure NI Visa Server on the embedded computer without having to install or configure through MAX?
Thanks in advance for any help.

Hello!
Your system should appear under remote systems and then you can right click on the software folder and install software. Our 8145s for instance have compact flash drives and this process works. Could you give me more details on your hardware? Are you getting an error message when you try to install the software?
Allan S.

Client Copy and Partner Profiles

Hi,
I have a doubt related to client copy and how it will affect the partner profiles.
We have a client which has quite a lot of partner profiles defined in it. Now the problem is that the Basis team is planning to perform periodic client copies on this System which will copy the data from another client say 010 to the client in discussion. My doubt is, when this happens what will happen to the partner profiles that are already there in the target? Will it be lost resulting in we creating it all over again? if so is there anyway to get around this issue?
I would appreciate any kind of input on this issue.
Thanks
Praveen

as far as i know a client copy is based on some parameter say it can be client copy based on master data, client copy based on application data etc. I guess partner profile is an application data so in tht case if client copy is done in its context no data will be lost.
just my thought, but please confirm on this with a BASIS team or try a post in the forum for Adminstration and BASIS.

Differences between Remote Client copy and Client export and Import

Dear All, I am new to SAP. Please let me know the Differences between Remote Client copy and Client export and Import. Any response is greatly appreciated. Thanks a Million

Hello Mallikarjuna,
Follow the below note,
https://service.sap.com/sap/support/notes/552711
which describes the answer to question - Which is better or faster, a client transport or a remote copy?
Basically client transport would be preferred if the network connection between the source and target system is slow.
For more help,
http://help.sap.com/saphelp_nw70/helpdata/EN/69/c24c0f4ba111d189750000e8322d00/frameset.htm
Regards,
Debasis.

What is the defferent between client copy and client transport

what is the defferent between client copy and client transport?
give me the steps that how to make a applications data copy from production to QAS.
thanks
priyan

Hi,
what is the defferent between client copy and client transport?You better google it..!
here is the result..
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctscco/bcctscco.pdf
Follow the standard procedure of System Copy from PRD => QAS :
Download guide as per your release:
http://service.sap.com/systemcopy
What is Systemcopy:
http://help.sap.com/saphelp_rc10/helpdata/en/a2/2f0c173a5e43d19585724239ff4de7/frameset.htm
Regards;

Installing and configuring microsoft sharepoint server 2013

Could you please advise where can I get this book "installing and configuring microsoft sharepoint server 2013"? Thanks for your help.

There is a free ebook here:
http://www.microsoft.com/en-us/download/details.aspx?id=30384
It's also the title of a section of technet but that's not available in printed format as far as i know.
http://technet.microsoft.com/en-us/library/cc262957.aspx

Client copy with configuration data in R/3. Is there any effect on EBP sys

Hi all,
We are using classic scenario. Our client is reorganizing their Org structure for that we need to do client copy with only configuration data.
In this scenario we are uploading the master and transactional data through ALE in order to retain the same number ranges and the same data in EBP system.
My doubt is when we do config steps Define logical system and assign the logical system to the client and define Idoc message types etc... Is it necessary to run BBP_LOCATIONS_GET_ALL job. If yes the same data like Plant and storage location and all master data will override the existing data or not. And what about the open Purchase orders and open goods receipts.
Can you please reply immediately. It is very urgent.
Thanks in advance

waiting online

Step by Step of how to Install and configure the Web Server Core 2008 R2

I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Hi MASNSN,
Thanks for your sharing =)

After client copy and import export, WebUI not functioning

Hi Experts,
We have copied the client MKH300 into the client MKH305. The client
copy was performed using SAP_ALL authorization.
After the client copy a client compare was performed and several
differences were discovered. BDLS was run and a custom program was run
to copy custom tables from MKH300 to MKH305. This program has been run
in several other client copy cases and there is no issue with it.
When logging into the WebUI in client MKH305 an error message is
displayed in the application log:
"An exception has occurred during program processing"
(Please see attached screen shot)
When looking into the details the following text is shown:
Diagnosis
An exception occurred during request processing. This was handled
centrally. It changed the program flow and the result of the request
probably contains errors.
Procedure
Contact your system administrator.
Procedure for System Administration
Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use
transaction SAAB. If the error recurs, further details are displayed.
When the check point group was activated there was no more information.
The links in the Homepage are not correct even though the business
roles, config keys etc look the same between the clients.
Much customization seems lost for the WebUI although when comparing the
two clients' customization for the WebUI they seem identical.
The client MKH300 works fine so the intention was that MKH305 should be
an exact copy of that client, but that did not happen.
Could you please help me out.
Thanks!
Nagaraju

they are included in the xe server install ...you could try copying the executables but maybe that wont work if all the libraries arent present
failing that install the regular oracle client

How does WSUS work when an SCCM 2012 R2 server is newly installed? Should WSUS be installed and configured on same server?

Let me clarify.
We had a functional WSUS server delivering our updates to ours workstations. The location of the WSUS server was pushed out by Group policies.
Later, an SCCM 2012 R2 installation was installed. The original WSUS server was removed. Now WSUS type services appear to be broken.
I tried to start WSUS on the SCCM 2012 R2 server and it does not start. (I assume its not configured).
I want to get WSUS running again but am not sure how to do this safely in conjunction with our SCCM 2012 R2 installation. Do I just reinstall WSUS on the SCCM server and configure? Or is there other preferred methods?
I was not involved in SCCM's installation, so I do not know what was done.
Geoff.

Update functionality is provided via the Software Update Point
https://technet.microsoft.com/en-us/library/gg712312.aspx
... which requires WSUS to be installed - it basically takes control of WSUS.
Any existing group policies defining WSUS servers should be removed so that the SCCM client (which I assume is installed on computers already) can configure accordingly. Otherwise you will have group policy and SCCM client over writing one another to configure
the update server

Client Copy and Configuration of Integration Server

Similar Messages

Maybe you are looking for