Client getting an IP lease on the 64-bit LiteTouch boot image, but not the 32-bit version.
MDT 2012 U1. No problem with PXE booting so WDS is not the issue.
The NIC in question is the Intel I217-LM, which resides on both the new Dell Optiplex 9020 and the Latitude E7440. I downloaded the Dell drivers and then the Intel drivers and imported them into the WindowsPE drivers folder in the workbench. Updated
the boot images to make sure the new drivers were injected. Both yielded the same result. I can do everything I need to do when booting to the 64-bit LiteTouchPE_x64.wim boot image, but not the 32-bit version. When booting to the 32-bit
version, I get no IP configuration info at all.
When looking at the drivers in MDT, I see only one difference: the supported OS versions. The 64-bit driver supports 6.1, 6.1.1, and 6.2. The 32-bit driver supports only 6.1.1 and 6.2. Not sure if that's the issue.
Tried using drvload within 32-bit WinPE to manually inject the NIC driver. Still no luck. Ipconfig yields no configuration at all.
If I can't get these machines to boot to the 32-bit boot images, I can't deploy 32-bit images, unless there's a way of which I'm unaware.
EDIT: A little extra background. My WindowsPE folder has two subfolders called x86 and x64. Obviously, 32-bit drivers go into the x86 folder and 64-bit drivers go into the x64 folder. Then in the properties of the deployment share a
selection profile is selected which points to the architecture-specific folders.
Specifically what do you see when you are in WinPE, press the F8 button, and run ipconfig.
1. ipconfig shows no network adapters (see:
http://myitforum.com/cs2/blogs/rpedersen/clip_image002_53DA17D4.jpg ). This means you still have not loaded the correct device drivers, check the c:\windows\system32\wpeinit.log file.
2. ipconfig shows an "autoconfiguration IPv4 Address" with a netmastk of 255.255.0.0. This means that the client did not get an IP address from the DHCP server. Double check the connection between the client and the DHCP server.
3. ipconfig shows a correct address. There is no problem. :^)
Keith Garner - keithga.wordpress.com
I get the first result. Absolutely no network adapters, which I assumed indicated no appropriate device driver.
This is the result of the wpeinit.log from the machine booting to the 32-bit boot image:
Info WPEINIT is processing the unattend file [X:\unattend.xml]
Info Spent 1747ms initializing removable media before unattend search
Info ==== Initializing Display Settings ====
Info Setting display resolution 1024x768x32@60: 0x00000000
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Computer Name ====
Info Generating a random computer name
Info No computer name specified, generating a random name.
Info Renaming computer to MININT-TFRU2BT.
Info Acquired profiling mutex
Info Service winmgmt disable: 0x00000000
Info Service winmgmt stop: 0x00000000
Info Service winmgmt enable: 0x00000000
Info Released profiling mutex
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Virtual Memory Paging File ====
Info No WinPE page file setting specified
Info STATUS: SUCCESS (0x00000001)
Info ==== Initializing Optional Components ====
Info WinPE optional component 'Microsoft-WinPE-HTA' is present
Info WinPE optional component 'Microsoft-WinPE-MDAC' is present
Info WinPE optional component 'Microsoft-WinPE-WMI' is present
Info WinPE optional component 'Microsoft-WinPE-WSH' is present
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Network Access and Applying Configuration ====
Info No EnableNetwork unattend setting was specified; the default action for this context is to enable networking support.
Info Acquired profiling mutex
Info Install MS_MSCLIENT: 0x0004a020
Info Install MS_NETBIOS: 0x0004a020
Info Install MS_SMB: 0x0004a020
Info Install MS_TCPIP6: 0x0004a020
Info Install MS_TCPIP: 0x0004a020
Info Service dhcp start: 0x00000000
Info Service lmhosts start: 0x00000000
Info Service ikeext start: 0x00000000
Info Service mpssvc start: 0x00000000
Info Released profiling mutex
Info Spent 749ms installing network components
Info Spent 1669ms installing network drivers
Error QueryAdapterStatus: no adapters found.
Info Spent 0ms confirming network initialization; status 0x80004005
Info WaitForNetworkToInitialize failed; ignoring error
Info STATUS: SUCCESS (0x003d0001)
Info ==== Applying Firewall Settings ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Executing Synchronous User-Provided Commands ====
Info Parsing RunSynchronousCommand: 1 entries
Info Command 0: 0x00000000
Info Successfully executed command 'wscript.exe X:\Deploy\Scripts\LiteTouch.wsf' (exit code 0x00000000)
Info STATUS: SUCCESS (0x00000000)
Info ==== Executing Asynchronous User-Provided Commands ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Applying Shutdown Settings ====
Info No shutdown setting was specified
Info STATUS: SUCCESS (0x00000001)
At first I thought the first bolded section might be relevant, but when I booted to the x64 boot image, which works fine, I get the same message in its wpeinit.log file. The only difference between the two log files is that the x64 boot image actually
shows successful installation of a driver where the second bolded section is.
Similar Messages
-
When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?
Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar. -
Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option what am i doing wrong?
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
-
I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?
i also contacted the company that sold me the battery and they offered me my money back or a new battery
Suggest that you take them up on their offer of a new battery. Make sure you got the right one for your model MBP.
2 separate MBP battery installation Articles:
1 -
MacBook Pro: How to remove or install the battery
2 -
MacBook Pro: How to remove or install memory
=================
Never post your email address in a public forum. Spam bots roam public forums looking for "spam victims".
If you insist on using your email address in a public forum & you want to "trick" the spam bots, then suggest that instead of using "@" in the email address, use instead the actual word AT.
Regarding responding to your emal addy, we ask that you post all questions to the appropriate discussion forum. This allows other users and other helpers to have a chance to view and respond to your post. That way, everyone benefits from the exchange.
Thank you
I have requested that a HOST remove your email addy. -
I attached my HDMI cable to my Samsung Tv. The "classic" apple screen comes up, but not the screen on my MacBook. Therefore I can't access my laptop.
You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor. -
hello is there a solution to play some avi formats with quicktime because with all the codec i can play video but not the sound thank you by advance (im on windows 7 so perian cant help me)
I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.
-
We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it. -
If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems. -
I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens. It says ios8.0.2 improvements from 8.0.1 are available but not the whole ios. What to do?
It sounds like maybe 8.0.1 has downloaded onto your phone but not installed. You can check for it in Settings > General > Usage > Storage, Manage Storage. If it's there you should see it at the top of the list of apps. Swipe to delete it. 8.0.1 was pulled by Apple quickly after it was introduced due to issues and replaced by 8.0.2. Once it's deleted you should be able to download and install 8.0.2.
-
What's the best way to erase content but not the applications?
I'm giving away my iMac to my niece. I want to erase all my content files, libraries ,etc., but not the applications. What's the best way to do this, and to do it securely?
If you have Downloaded and Upgraded to Lion See...
Here is an excerpt of the SLA; the Lion license (purchased from MAS) is NOT transferable. The SLA is quite clear:
B. If you obtained your license to the Apple Software from the Mac App Store or on Apple-branded physical media, it is not transferable. If you sell your Apple-branded hardware to athird party, you must remove the Apple Software from the Apple-branded hardware beforedoing so, and you may restore your system to the version of the Apple operating systemsoftware that originally came with your Apple hardware (the “Original Apple OS”) andpermanently transfer the Original Apple OS together with your Apple hardware, provided that:(i) the transfer must include all of the Original Apple OS, including all its component parts,printed materials and its license; (ii) you do not retain any copies of the Original Apple OS, fullor partial, including copies stored on a computer or other storage device; and (iii) the partyreceiving the Original Apple OS reads and agrees to accept the terms and conditions of theOriginal Apple OS license.
Now Proceed...
Boot from the original OS installer disk and do an Erase & Install.
When the Mac reboots into Mac Setup Assistant Quit and shut it down.
When the New Owner Boots it up it's a brand new Mac... just like when you got it.
( The Original Install Disc(s) should also be included with the sale )
http://www.ehow.com/how_5852122_restore-imac-factory-settings.html -
I have two iPad 2 with separate iCloud accounts. I want to copy folders of weblinks from one iPad to the other. Email solution? Answer needs to be written for a user who doesn't know how to select a folder or a number of icons and email or copy them to something that can be emailed. I know how to do it one at a time by opening weblink and then emailing the link from safari.
Good idea. I've already used the feedback for my general suggestions to improve the way Apple handles bug reports (and tried sending it to Steve Jobs too), but I'll send a specific suggestion for a bug app on the iPhone.
However, my question is whether there is a simple way to send bug reports from the iPhone now that I have overlooked. -
Load image, but NOT the whole page
I have a simple html web page that I want to display a
selection of images. I want to be able to have the images load when
the next or previous buttons are clicked, but I don't want the
whole page to reload. I know that I can do this with various
server-side languages, but as this is a static website I didn't
know if was possible to do it with javascript.
Thanks>I have a simple html web page that I want to display a
selection of images.
>I
> want to be able to have the images load when the next or
previous buttons
> are
> clicked, but I don't want the whole page to reload. I
know that I can do
> this
> with various server-side languages, but as this is a
static website I
> didn't
> know if was possible to do it with javascript.
You HAVE to use javascript, as you don't want the page to
reload.
Personally, I don't like photogalleries that do this, as I
can't link
directly to a specific image.
that said, here's an option:
http://www.huddletogether.com/projects/lightbox2/
-Darrel -
I bought some movies from iTunes to put on my ipad. I stored them in icloud and downloaded them to my pc. problem is that although the bonus features etc will play on the pc, the actual movie won't! What should I do??
What happens when you try to play the actual film ? And have you tried deleting them and (assuming that they're still in the store) redownloading them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page - or going into Edit > Preferences and on the Store tab ticking the 'show iTunes in the Cloud purchases' tick box so that they show in the My Movies part of your library with a cloud icon against it for redownloading) ?
(You can't store films in the cloud, whether they will show there for redownloading depends upon what country that you are in - and if you move countries or if the rights-holder removes them then you also won't be able to redownload them. Ideally you'd be taking a backup copy of all of your downloads, and not relying on being able to redownload them in the future.) -
How do I get the print button to operate ? The print to file is litup but not the print button
The print button on 5.6 is darken out the print to file is not in either case they don't work. I have a new Epson R 3000 that works fine with the Photo program on my iMac pro just upgraded to yosemite but do not think that is the problem. Likely something did or did not do!
lenIn your Print Job panel is a pulldown (near the top) called Print to: Set it to Printer instead of JPEG file.
-
toolbar not showing
You didn't mention which version of Firefox you had that problem with. If you had Firefox 5.0, you probably need an update from Roboform to get it to work.
http://www.roboform.com/support/news
Version 7.3.2
* Firefox 5: add support for Firefox 5.
Maybe you are looking for
-
Customer exit for Batch management
Hi experts, I'm using customer exit for batch management for internal number assignment. I need the Batch number as i mentioned below DDMMYYB01 DD-Date MM-Month YY-Year B-Block 01-Number For this i need to give logic. How to give i'm not getting. Th
-
MOVED: N660 TF 2GD5/OC and Gaming APP error
This topic has been moved to Graphics Cards. https://forum-en.msi.com/index.php?topic=256162.0
-
hi friends, we want to connect XI and R3 systems. We did following settings to do this but we are still getting in sproxy transaction in R3 error message "No connection to integration builder".:- 1. Create HTTP connection in the busines
-
FireWire vs USB at hibernate mode
Well I have the following task/issue. I have iMac and installed SamrtSleep 3rd party utility. It put my IMac in hibernate mode once system goes sleep. I have made for UPS setup so when power is off iMac will hibernate. The problem is I have several e
-
Activation error in BI, Urgent plz
Hi I created the custom data source for RORQSTPRMS table in source system ECC 6.0 by selecting required fields in datasource and replicated to BI 7.0. When i try to activate the data source it shows the error as Field DATAPAKID ( Position 2 ): Inva