Client_Info Setting

Hi there !
I have a problem here, I need check in the CLIENT_INFO column, into v$session database these information, about which weblogic instance is running! In other words, I would like to know, when selecting v$session CLIENT_INFO column whether is possible check which weblogic managed server instance is logging !
This is essential for our operation !
Should I set some option in weblogic server ? Or some code line in the application, or some debug level instead ?
Thanks in advance !
Edson

Hi,
I dont think so that you want to have any thing must be done on weblogic managed server.
Still you want to run check the logs and let me know.
Regards,
Kal

Similar Messages

  • Strange behaviour when setting client_info and module in v$session

    Hello,
    I've tried to set the CLIENT_INFO field in V$SESSION using DBMS_APPLICATION_INFO.SET_CLIENT_INFO but found a strange behaviour.
    Normally the forms modules seems to set the field MODULE in V$SESSION to its name. If I use DBMS_APPLICATION_INFO.SET_CLIENT_INFO the CLIENT_INFO field is set correctly but the MODULE field is set to 'frmweb.exe' instead of the forms modules name.
    I also tried to set the MODULE using DBMS_APPLICATION_INFO.SET_MODULE but then strangely the MODULE and MODULE_HASH field of the original frmweb.exe (the main applet?) entry and the entry for the forms module were the same (set to the new module name). From now on every newly opened module had 'frmweb.exe' as the module entry until I closed the forms application.
    Example:
    Entries in V$SESSION:
    -- After start of forms application there is only one entry for the process:
    PROCESS           MODULE            MODULE_HASH            CLIENT_INFO
    1596:7204         frmweb.exe        854945150
    -- When a new forms module is opened it looks like this:
    PROCESS           MODULE            MODULE_HASH            CLIENT_INFO
    1596:7204         frmweb.exe        854945150
    1596:7204         my_module         1929284615
    -- When the modified forms module that sets the client_info/module is opened this happens:
    PROCESS           MODULE            MODULE_HASH            CLIENT_INFO
    1596:7204         mod_module        3097977240
    1596:7204         mod_module        3097977240             my client info
    1596:7204         my_module         1929284615As one can see the entry of the forms application seems to be overriden (at least the MODULE and MODULE_HASH fields) but the CLIENT_INFO only changes for one of the entries?
    The following code is responsible for the changes of CLIENT_INFO and MODULE:
        -- get client info
        client_info :=
            webutil_clientinfo.get_ip_address
            || ' (' ||
            webutil_clientinfo.get_user_name
            || ')'
        -- set client info
        DBMS_APPLICATION_INFO.SET_CLIENT_INFO(client_info);
        -- get module (set action to '')
        DBMS_APPLICATION_INFO.SET_MODULE(name_in('system.current_form'),''); I really don't understand, why it does not work properly.
    Any help is appreciated!
    Thanks in advance.

    This was an application module pooling, activation / passivation issue.
    After view objects had been set-up correctly, the problem disappeared.

  • How to set client within SQL statement without using another pl/sql stmt.

    I have a following select statement
    SELECT SUM (w.prior_forecasted_costs + w.prior_committed_costs)
    FROM xxsuf.job_cost_summary_table w,
    apps.pa_periods p,
    pa.pa_resources bz,
    pa.pa_resource_list_members cz,
    pa.pa_tasks dz
    WHERE w.project_id = z.project_id
    AND w.task_id = dz.task_id
    AND dz.task_number '98000'
    AND w.resource_list_member_id = cz.resource_list_member_id
    AND cz.resource_id = bz.resource_id
    AND NOT EXISTS (SELECT NULL
    FROM pa.pa_tasks zz
    WHERE zz.parent_task_id = dz.task_id)
    AND w.resource_list_member_id != 1000
    AND p.period_name = w.pa_period
    AND p.current_pa_period_flag = 'Y'
    Above select statement uses pa_periods view which only works when I set my client using "exec DBMS_Application_Info.set_client_info(83);" in Toad or SQL*Plus session.
    I was wondering how can I achieve it within select statement. so that I don't have to use another PL/SQL statement to set my client. Is there anyway to set client with my org id within above select statement ?
    Please advise.
    --Rakesh                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    You can simply create a function which calls dbms_application_info and use that in your sql statement as in
    SQL> create or replace function set_client_info (i_info varchar2)
       return varchar2
    as
    begin
       dbms_application_info.set_client_info (i_info);
       return i_info;
    end set_client_info;
    Function created.
    SQL> create or replace view v_emp
    as
      select * from emp where empno = to_number(sys_context('userenv','client_info'))
    View created.
    SQL> select ename from v_emp where set_client_info(7788) is not null
    ENAME    
    SCOTT    
    1 row selected.
    SQL> select ename from v_emp where set_client_info(7900) is not null
    ENAME    
    JAMES    
    1 row selected.

  • When userenv('CLIENT_INFO') return too much information?

    We just applied some oracle patches and now when when I do a "select trim(userenv('CLIENT_INFO')) from dual", I am getting PETERRA:1389409584404465. All I want/need is JUST the user name (PETERRA). This worked before our DBAs applied the patch(es).
    Is there a setting I can change to only get the user name - not the "extra" information?
    Please advise.

    SleepDeprivedInSeattle wrote:
    We just applied some oracle patchesWhat patches?
    and now when when I do a "select trim(userenv('CLIENT_INFO')) from dual", I am getting PETERRA:1389409584404465. All I want/need is JUST the user name (PETERRA). This worked before our DBAs applied the patch(es). See +{message:id=10387545}+ : this appears to be a bug or undocumented change in behaviour introduced at some point between 3.0.0 and 4.1.1.
    It's not just the length/additional data, its the difference between the information returned by <tt>CLIENT_INFO</tt> and <tt>CLIENT_IDENTIFIER</tt> (builder session ID and runtime app session ID?)
    Oracle didn't respond to that thread.
    Is there a setting I can change to only get the user name - not the "extra" information?Not that I'm aware of. Can you trim off the extra info?

  • Test if interval is set properly in DBMS_JOB .

    Hi,
    looking for a way to test interval setting in some complex cases .
    Its obvious when You have
    DBMS_JOB.SUBMIT (
            :jobno
          , 'p;'
          , TRUNC(sysdate)+11/24
          , 'TRUNC(SYSDATE+1)+11/24');but what if You want interval depend on day of week and hour in that day .
    Like, in asktom example
    create or replace view next_date
      2  as
      3  select case
      4         when (to_char( sysdate, 'hh24' ) between 6 and 17
      5                   and to_char(sysdate,'dy') NOT IN ('sat','sun') )
      6              then trunc(sysdate)+(trunc(to_char(sysdate,'sssss')/900)+1)*15/24/60
      7         when (to_char( sysdate, 'dy' ) not in ('fri','sat','sun') )
      8              then trunc(sysdate)+1+6/24
      9         else next_day( trunc(sysdate), 'Mon' )+6/24
    10         end interval_date
    11   from dual
    12  /
    View created.
    ops$[email protected]>
    ops$[email protected]> begin
      2     dbms_job.submit( :n,
      3                      'null;',
      4                      sysdate,
      5                     '(select * from next_date)'
      6                    );
      7  end;
      8  /How can I say , its Saturday 11 o'clock , show me what I'll get from interval .
    Regards
    GregG

    GregG wrote:
    How can I say , its Saturday 11 o'clock , show me what I'll get from interval .Create parameterized test view:
    SQL> create or replace
      2    view next_date_test
      3      as
      4        with t as (
      5                   select  to_date(sys_context('userenv','client_info'),'mm/dd/yyyy hh24:mi:ss') dt from dual
      6                  )
      7        select case
      8                 when (to_char(dt,'hh24') between 6 and 17 and to_char(dt,'dy') NOT IN ('sat','sun'))
      9                   then trunc(dt)+(trunc(to_char(dt,'sssss')/900)+1)*15/24/60
    10                 when (to_char(dt,'dy' ) not in ('fri','sat','sun'))
    11                   then trunc(dt)+1+6/24
    12                 else next_day(trunc(dt),'Mon')+6/24
    13               end interval_date
    14         from  t
    15  /
    View created.
    SQL> exec dbms_application_info.set_client_info('11/24/2012 11:00:00');
    PL/SQL procedure successfully completed.
    SQL> alter session set nls_date_format = 'mm/dd/yyyy hh24:mi:ss'
      2  /
    Session altered.
    SQL> select  *
      2    from  next_date_test
      3  /
    INTERVAL_DATE
    11/26/2012 06:00:00
    SQL> So if it iss Saturday 11 o'clock next date will be Monday 6 am.
    SY.

  • Set client info

    Hi all
    when i run my query in APPs its not giving any result.
    but when i call this below command and run the query it shows the result.
    call DBMS_APPLICATION_INFO.set_client_info('100');
    why so?

    Hi,
    Dbms_application_info. set_client_info allows you to store some data in the v$session view, where later queries can reference it.
    Apparantly, your query is doing something like:
    WHERE   department_id IN ( SELECT  client_info
                            FROM        v$session
                    )If you never call set_client_info, the condition above will never be TRUE.
    Sometimes this is used to make sure steps are done in a certain order: one step in the process sets client_info, and a later step checks that an appropriate value was stored there, and does nothing if it is not.
    This can also be a way to pass parameters to a view.

  • Setting DBMS Application Information using OAF

    Hi,
    We are trying to set custom information for the client_info and module session parameter using JDeveloper? Has anyone done this before?
    This is what we used in our old PL\SQL Stored procedure
    DBMS_APPLICATION_INFO.set_module(<module>);
    DBMS_APPLICATION_INFO.set_client_info (<client info>);
    Any help will be appreciated?
    David

    Thanks Avajain,
    I have called PL\SQL Procedures from the JDev before. I was just concerned it would create a new session when it accesses the package on the database; unltimately setting the wrong sessions information.
    I will test it and see.
    Thanks again
    David

  • CLIENT_INFO usage in R12

    Hi All,
    I am new to r12 environment. In 11i, there is a view which is made of ap_system_parameters_all and gl_mc_reporting_options. In that view, it uses CLIENT_INFO to retrieve reporting_set_of_books_id... As I understood mc_gl_reporting_options is removed in R12, so it seems we have to use gl_ledger_relationship in stead... But my doubt is about to use client_info logic in R12 (can we use client_info as is , or is there any other way to use it in R12).... 11i view excerpts are below
    FROM AP_SYSTEM_PARAMETERS_ALL B, gl_mc_reporting_options MC
    WHERE MC.reporting_set_of_books_id =
    NVL (TO_NUMBER (SUBSTRB (USERENV ('CLIENT_INFO'), 45, 10)), -99)
    Also i would appreciate if you could explain the detailed client_info value it gets set in 11i.. I assume client_info (from 1 to 10) is org id....
    Your help is appeciated.
    Regards,
    SP

    hi SP,
    Also i would appreciate if you could explain the detailed client_info value it gets set in 11i.. I assume client_info (from 1 to 10) is org id.... please see this
    http://cyberserf.com/2011/06/14/multi-org-functionality-and-sql-in-oracle-apps-r11-and-r12/
    Multi Org Access Control (MOAC) in Oracle Purchasing[Article ID 397362.1]
    ML Note: 420787.1
    Oracle Applications Multiple Organizations Access
    Control for Custom Code
    • ML Note: 462383.1
    SQL Queries and Multi-Org Architecture in Release 12
    • ML Note: 396750.1
    Oracle Applications Multiple Organizations Release 12
    Roadmap Document
    • Oracle Applications Multiple Organizations
    Implementation Guide Release 12
    Part No. B31183-02
    ;) AppsMAsti ;)
    Sharing is CAring

  • How to Set Client Info in OBIEE

    Hi All,
    Im accessing Oracle Applications table from OBIEE through database. How can I set the client info so that I can see the data.
    Thanks

    Hi,
    You can execute a script at logon. Check the 'Connection Scripts'-tab on your connection pool. Her you can define a 'Execute on Connect'-script.
    This way you can set your client_info en view the Oracle eBS table data.
    Good Luck,
    Daan Bakboord

  • Does anyone know how Oracle Forms (11g) sets the V$SESSION.MODULE value?

    Hi,
    Older versions of forms required explicit calls to dbms_application_info package to set the name of the forms module (or other useful diagnostic info made visible on the database via v$session module, action and client_info).
    It seems that the application we currently manage (third party vendor) sets this, too. But I cannot find any call to DBMS_APPLICATION_INFO in the source fmb, pll, olb or any database package code called from the forms sessions.
    Can anybody confirm my suspicion that the V$SESSION.MODULE attribute is now being set by low-level Forms library code, independently of application code?
    If so, it's a great feature, I just want peace of mind! I've searched google, this forum and Oracle Support site for any reference to such a behaviour, but struck out.
    Thanks,
    Andrew

    Oops. Next time I'll take off the 90day limit on search history.
    For others: In 11G the MODULE column of V$SESSION is updated with the Forms module name. [Oracle Support ID 1413688.1]
    Cheers,
    Andrew

  • Xorg 1.10.1 no longer affected by manual DPI setting

    I use my 23 inch 1920x1080 monitor as TV also. As this means I sit rather far from it, I manually set DPI quite low to enlarge windows and fonts by default. However after the last upgrade, which brought Xorg 1.10 and Gnome 3, Xorg seems to no longer be affected by my setting DPI in xorg.conf. The logs show that the value is read, and xdpyinfo shows the DPI I have set manually, but this setting no longer seems to affect any windows or fonts.
    The DPI is set via the nvidia driver. Relevant parts of xorg.conf and the full Xorg.0.log are attached.
    Does anyone know what could have caused this?
    xorg.conf:
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    Option "DPI" "60x60"
    EndSection
    Xorg.0.log:
    [ 45267.074]
    X.Org X Server 1.10.1
    Release Date: 2011-04-15
    [ 45267.074] X Protocol Version 11, Revision 0
    [ 45267.074] Build Operating System: Linux 2.6.38-ARCH x86_64
    [ 45267.074] Current Operating System: Linux norstaurar 2.6.38-ARCH #1 SMP PREEMPT Fri May 13 09:24:47 CEST 2011 x86_64
    [ 45267.074] Kernel command line: root=/dev/disk/by-uuid/41bd750d-271b-4392-898a-51e284889d43 ro
    [ 45267.074] Build Date: 16 April 2011 12:02:01PM
    [ 45267.074]
    [ 45267.074] Current version of pixman: 0.20.2
    [ 45267.074] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 45267.074] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 45267.074] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 3 10:40:17 2011
    [ 45267.074] (==) Using config file: "/etc/X11/xorg.conf"
    [ 45267.074] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 45267.075] (==) ServerLayout "Layout0"
    [ 45267.075] (**) |-->Screen "Screen0" (0)
    [ 45267.075] (**) | |-->Monitor "Monitor0"
    [ 45267.075] (**) | |-->Device "Device0"
    [ 45267.075] (**) |-->Input Device "Keyboard0"
    [ 45267.075] (**) |-->Input Device "Mouse0"
    [ 45267.075] (==) Automatically adding devices
    [ 45267.075] (==) Automatically enabling devices
    [ 45267.075] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 45267.075] Entry deleted from font path.
    [ 45267.075] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 45267.075] Entry deleted from font path.
    [ 45267.075] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 45267.075] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 45267.075] Entry deleted from font path.
    [ 45267.075] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 45267.075] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 45267.075] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 45267.075] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 45267.075] (WW) Disabling Keyboard0
    [ 45267.075] (WW) Disabling Mouse0
    [ 45267.075] (II) Loader magic: 0x7d6fa0
    [ 45267.075] (II) Module ABI versions:
    [ 45267.075] X.Org ANSI C Emulation: 0.4
    [ 45267.075] X.Org Video Driver: 10.0
    [ 45267.075] X.Org XInput driver : 12.2
    [ 45267.075] X.Org Server Extension : 5.0
    [ 45267.076] (--) PCI:*(0:2:0:0) 10de:0848:1043:82f2 rev 162, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
    [ 45267.076] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 45267.076] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 45267.076] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 45267.076] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 45267.076] (II) "record" will be loaded by default.
    [ 45267.076] (II) "dri" will be loaded by default.
    [ 45267.076] (II) "dri2" will be loaded by default.
    [ 45267.076] (II) LoadModule: "dbe"
    [ 45267.077] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 45267.077] (II) Module dbe: vendor="X.Org Foundation"
    [ 45267.077] compiled for 1.10.1, module version = 1.0.0
    [ 45267.077] Module class: X.Org Server Extension
    [ 45267.077] ABI class: X.Org Server Extension, version 5.0
    [ 45267.077] (II) Loading extension DOUBLE-BUFFER
    [ 45267.077] (II) LoadModule: "extmod"
    [ 45267.077] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 45267.077] (II) Module extmod: vendor="X.Org Foundation"
    [ 45267.077] compiled for 1.10.1, module version = 1.0.0
    [ 45267.077] Module class: X.Org Server Extension
    [ 45267.077] ABI class: X.Org Server Extension, version 5.0
    [ 45267.077] (II) Loading extension MIT-SCREEN-SAVER
    [ 45267.077] (II) Loading extension XFree86-VidModeExtension
    [ 45267.077] (II) Loading extension XFree86-DGA
    [ 45267.077] (II) Loading extension DPMS
    [ 45267.077] (II) Loading extension XVideo
    [ 45267.077] (II) Loading extension XVideo-MotionCompensation
    [ 45267.077] (II) Loading extension X-Resource
    [ 45267.077] (II) LoadModule: "glx"
    [ 45267.077] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 45267.092] (II) Module glx: vendor="NVIDIA Corporation"
    [ 45267.092] compiled for 4.0.2, module version = 1.0.0
    [ 45267.092] Module class: X.Org Server Extension
    [ 45267.092] (II) NVIDIA GLX Module 270.41.19 Mon May 16 23:48:30 PDT 2011
    [ 45267.092] (II) Loading extension GLX
    [ 45267.092] (II) LoadModule: "record"
    [ 45267.092] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 45267.092] (II) Module record: vendor="X.Org Foundation"
    [ 45267.092] compiled for 1.10.1, module version = 1.13.0
    [ 45267.092] Module class: X.Org Server Extension
    [ 45267.092] ABI class: X.Org Server Extension, version 5.0
    [ 45267.092] (II) Loading extension RECORD
    [ 45267.092] (II) LoadModule: "dri"
    [ 45267.092] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 45267.092] (II) Module dri: vendor="X.Org Foundation"
    [ 45267.092] compiled for 1.10.1, module version = 1.0.0
    [ 45267.092] ABI class: X.Org Server Extension, version 5.0
    [ 45267.092] (II) Loading extension XFree86-DRI
    [ 45267.092] (II) LoadModule: "dri2"
    [ 45267.092] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 45267.092] (II) Module dri2: vendor="X.Org Foundation"
    [ 45267.092] compiled for 1.10.1, module version = 1.2.0
    [ 45267.092] ABI class: X.Org Server Extension, version 5.0
    [ 45267.093] (II) Loading extension DRI2
    [ 45267.093] (II) LoadModule: "nvidia"
    [ 45267.093] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 45267.093] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 45267.093] compiled for 4.0.2, module version = 1.0.0
    [ 45267.093] Module class: X.Org Video Driver
    [ 45267.094] (II) NVIDIA dlloader X Driver 270.41.19 Mon May 16 23:33:35 PDT 2011
    [ 45267.094] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 45267.094] (++) using VT number 8
    [ 45267.096] (II) Loading sub module "fb"
    [ 45267.096] (II) LoadModule: "fb"
    [ 45267.096] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 45267.097] (II) Module fb: vendor="X.Org Foundation"
    [ 45267.097] compiled for 1.10.1, module version = 1.0.0
    [ 45267.097] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 45267.097] (II) Loading sub module "wfb"
    [ 45267.097] (II) LoadModule: "wfb"
    [ 45267.097] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 45267.097] (II) Module wfb: vendor="X.Org Foundation"
    [ 45267.097] compiled for 1.10.1, module version = 1.0.0
    [ 45267.097] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 45267.097] (II) Loading sub module "ramdac"
    [ 45267.097] (II) LoadModule: "ramdac"
    [ 45267.097] (II) Module "ramdac" already built-in
    [ 45267.097] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 45267.097] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 45267.097] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 45267.097] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 45267.097] (==) NVIDIA(0): RGB weight 888
    [ 45267.097] (==) NVIDIA(0): Default visual is TrueColor
    [ 45267.097] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 45267.097] (**) NVIDIA(0): Option "DPI" "60x60"
    [ 45267.369] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [ 45267.369] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 45267.370] (II) NVIDIA(0): NVIDIA GPU GeForce 8300 (C77) at PCI:2:0:0 (GPU-0)
    [ 45267.370] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 45267.370] (--) NVIDIA(0): VideoBIOS: 62.77.2f.00.00
    [ 45267.370] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 45267.370] (--) NVIDIA(0): Connected display device(s) on GeForce 8300 at PCI:2:0:0
    [ 45267.370] (--) NVIDIA(0): Samsung SyncMaster (DFP-0)
    [ 45267.370] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock
    [ 45267.370] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS
    [ 45267.372] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
    [ 45267.372] (WW) NVIDIA(0): mode "720x480" is specified in the EDID; however, the
    [ 45267.372] (WW) NVIDIA(0): EDID's valid HorizSync range (27.000-81.000 kHz) would
    [ 45267.372] (WW) NVIDIA(0): exclude this mode's HorizSync (15.7 kHz); ignoring
    [ 45267.372] (WW) NVIDIA(0): HorizSync check for mode "720x480".
    [ 45267.372] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
    [ 45267.372] (WW) NVIDIA(0): mode "720x576" is specified in the EDID; however, the
    [ 45267.372] (WW) NVIDIA(0): EDID's valid HorizSync range (27.000-81.000 kHz) would
    [ 45267.372] (WW) NVIDIA(0): exclude this mode's HorizSync (15.6 kHz); ignoring
    [ 45267.372] (WW) NVIDIA(0): HorizSync check for mode "720x576".
    [ 45267.375] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
    [ 45267.375] (WW) NVIDIA(0): mode "720x480" is specified in the EDID; however, the
    [ 45267.375] (WW) NVIDIA(0): EDID's valid HorizSync range (27.000-81.000 kHz) would
    [ 45267.375] (WW) NVIDIA(0): exclude this mode's HorizSync (15.7 kHz); ignoring
    [ 45267.375] (WW) NVIDIA(0): HorizSync check for mode "720x480".
    [ 45267.376] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
    [ 45267.376] (WW) NVIDIA(0): mode "720x576" is specified in the EDID; however, the
    [ 45267.376] (WW) NVIDIA(0): EDID's valid HorizSync range (27.000-81.000 kHz) would
    [ 45267.376] (WW) NVIDIA(0): exclude this mode's HorizSync (15.6 kHz); ignoring
    [ 45267.376] (WW) NVIDIA(0): HorizSync check for mode "720x576".
    [ 45267.402] (II) NVIDIA(0): Assigned Display Device: DFP-0
    [ 45267.402] (==) NVIDIA(0):
    [ 45267.402] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 45267.402] (==) NVIDIA(0): will be used as the requested mode.
    [ 45267.402] (==) NVIDIA(0):
    [ 45267.402] (II) NVIDIA(0): Validated modes:
    [ 45267.402] (II) NVIDIA(0): "nvidia-auto-select"
    [ 45267.402] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 45267.426] (**) NVIDIA(0): DPI set to (60, 60); computed from "DPI" X config option
    [ 45267.426] (--) Depth 24 pixmap format is 32 bpp
    [ 45267.426] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 45267.430] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 45267.430] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 45267.430] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 45267.430] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 45267.430] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 45267.430] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 45267.430] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 45267.430] (II) NVIDIA(0): Config Options in the README.
    [ 45267.431] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 45267.472] (II) Loading extension NV-GLX
    [ 45267.508] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 45267.508] (==) NVIDIA(0): Backing store disabled
    [ 45267.508] (==) NVIDIA(0): Silken mouse enabled
    [ 45267.509] (**) NVIDIA(0): DPMS enabled
    [ 45267.509] (II) Loading extension NV-CONTROL
    [ 45267.510] (II) Loading extension XINERAMA
    [ 45267.510] (II) Loading sub module "dri2"
    [ 45267.510] (II) LoadModule: "dri2"
    [ 45267.510] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 45267.510] (II) Module dri2: vendor="X.Org Foundation"
    [ 45267.510] compiled for 1.10.1, module version = 1.2.0
    [ 45267.510] ABI class: X.Org Server Extension, version 5.0
    [ 45267.510] (II) NVIDIA(0): [DRI2] Setup complete
    [ 45267.510] (==) RandR enabled
    [ 45267.510] (II) Initializing built-in extension Generic Event Extension
    [ 45267.510] (II) Initializing built-in extension SHAPE
    [ 45267.510] (II) Initializing built-in extension MIT-SHM
    [ 45267.510] (II) Initializing built-in extension XInputExtension
    [ 45267.510] (II) Initializing built-in extension XTEST
    [ 45267.510] (II) Initializing built-in extension BIG-REQUESTS
    [ 45267.510] (II) Initializing built-in extension SYNC
    [ 45267.510] (II) Initializing built-in extension XKEYBOARD
    [ 45267.510] (II) Initializing built-in extension XC-MISC
    [ 45267.510] (II) Initializing built-in extension SECURITY
    [ 45267.510] (II) Initializing built-in extension XINERAMA
    [ 45267.510] (II) Initializing built-in extension XFIXES
    [ 45267.510] (II) Initializing built-in extension RENDER
    [ 45267.510] (II) Initializing built-in extension RANDR
    [ 45267.510] (II) Initializing built-in extension COMPOSITE
    [ 45267.510] (II) Initializing built-in extension DAMAGE
    [ 45267.512] (II) Initializing extension GLX
    [ 45267.586] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 45267.586] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 45267.586] (II) LoadModule: "evdev"
    [ 45267.586] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45267.586] (II) Module evdev: vendor="X.Org Foundation"
    [ 45267.586] compiled for 1.10.0, module version = 2.6.0
    [ 45267.586] Module class: X.Org XInput Driver
    [ 45267.586] ABI class: X.Org XInput driver, version 12.2
    [ 45267.586] (II) Using input driver 'evdev' for 'Power Button'
    [ 45267.586] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45267.586] (**) Power Button: always reports core events
    [ 45267.586] (**) Power Button: Device: "/dev/input/event3"
    [ 45267.605] (--) Power Button: Found keys
    [ 45267.605] (II) Power Button: Configuring as keyboard
    [ 45267.605] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 45267.605] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 45267.605] (**) Option "xkb_rules" "evdev"
    [ 45267.605] (**) Option "xkb_model" "evdev"
    [ 45267.605] (**) Option "xkb_layout" "se"
    [ 45267.636] (II) config/udev: Adding input device Video Bus (/dev/input/event1)
    [ 45267.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 45267.636] (II) Using input driver 'evdev' for 'Video Bus'
    [ 45267.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45267.636] (**) Video Bus: always reports core events
    [ 45267.636] (**) Video Bus: Device: "/dev/input/event1"
    [ 45267.648] (--) Video Bus: Found keys
    [ 45267.648] (II) Video Bus: Configuring as keyboard
    [ 45267.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input1/event1"
    [ 45267.648] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 45267.648] (**) Option "xkb_rules" "evdev"
    [ 45267.648] (**) Option "xkb_model" "evdev"
    [ 45267.648] (**) Option "xkb_layout" "se"
    [ 45267.650] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 45267.650] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 45267.650] (II) Using input driver 'evdev' for 'Power Button'
    [ 45267.650] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45267.650] (**) Power Button: always reports core events
    [ 45267.650] (**) Power Button: Device: "/dev/input/event2"
    [ 45267.662] (--) Power Button: Found keys
    [ 45267.662] (II) Power Button: Configuring as keyboard
    [ 45267.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 45267.662] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 45267.662] (**) Option "xkb_rules" "evdev"
    [ 45267.662] (**) Option "xkb_model" "evdev"
    [ 45267.662] (**) Option "xkb_layout" "se"
    [ 45267.666] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
    [ 45267.666] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 45267.666] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 45267.666] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45267.666] (**) Logitech USB Receiver: always reports core events
    [ 45267.666] (**) Logitech USB Receiver: Device: "/dev/input/event5"
    [ 45267.675] (--) Logitech USB Receiver: Found keys
    [ 45267.675] (II) Logitech USB Receiver: Configuring as keyboard
    [ 45267.675] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input5/event5"
    [ 45267.675] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    [ 45267.675] (**) Option "xkb_rules" "evdev"
    [ 45267.675] (**) Option "xkb_model" "evdev"
    [ 45267.675] (**) Option "xkb_layout" "se"
    [ 45267.676] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
    [ 45267.676] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 45267.676] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 45267.676] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 45267.676] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45267.676] (**) Logitech USB Receiver: always reports core events
    [ 45267.676] (**) Logitech USB Receiver: Device: "/dev/input/event6"
    [ 45267.685] (--) Logitech USB Receiver: Found 12 mouse buttons
    [ 45267.685] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 45267.685] (--) Logitech USB Receiver: Found relative axes
    [ 45267.685] (--) Logitech USB Receiver: Found x and y relative axes
    [ 45267.685] (--) Logitech USB Receiver: Found absolute axes
    [ 45267.685] (--) Logitech USB Receiver: Found keys
    [ 45267.685] (II) Logitech USB Receiver: Configuring as mouse
    [ 45267.685] (II) Logitech USB Receiver: Configuring as keyboard
    [ 45267.685] (II) Logitech USB Receiver: Adding scrollwheel support
    [ 45267.685] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 45267.685] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 45267.685] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.1/input/input6/event6"
    [ 45267.685] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    [ 45267.685] (**) Option "xkb_rules" "evdev"
    [ 45267.685] (**) Option "xkb_model" "evdev"
    [ 45267.685] (**) Option "xkb_layout" "se"
    [ 45267.685] (II) Logitech USB Receiver: initialized for relative axes.
    [ 45267.685] (WW) Logitech USB Receiver: ignoring absolute axes.
    [ 45267.686] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 45267.686] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 45267.686] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 45267.686] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 45267.686] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 45267.686] (II) No input driver/identifier specified (ignoring)
    [ 45267.687] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
    [ 45267.687] (II) No input driver/identifier specified (ignoring)
    [ 45267.692] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
    [ 45267.692] (II) No input driver/identifier specified (ignoring)

    I seem to have been unclear in my original post. Setting it in Gnome 3 would all be fine and dandy, however although Gnome 3 was installed (upgraded from 2.x), I use fvwm. Gtk etc is still used but I don't see why upgrading a DE I don't use would impair another WM from using the X11 DPI settings. Also changing that setting in Gnome 3 does not affect neither the login screen (GDM) nor anything in fvwm.

  • Cannot send email from Iphone. A setting is off.

    What are the correct settings to send email from my aol account that's included in my I Cloud acct. any suggestions???? Thanks Sue

    Read this
    How do I set up AOL Mail on my iPhone or iPod Touch? - AOL Help

  • HOW TO SET UP PARTNER APPLICATION TO USE SSO OUTSIDE OF PORTAL

    If anyone knows how Portal switches context to run as the db user mapped to the lightweight schema and how it knows the db schema password please let me know.
    Should you have any queries please do not hesitate to contact me on 07775 896738.
    From document Oracle Portal Security Overview on PortalStudio.oracle.com:
    In Single Sign On mode (EnableSSO=Yes in the DAD), mod_plsql determines the name of the light-weight user and mapped database schema by calling
    WPG_SESSION_PRIVATE.GET_LW_USER and WPG_SESSION_PRIVATE.GET_DB_USER respectively.
    ** These calls are done using the Portal Schema (PORTAL30) and Portal schema password **
    mod_plsql then executes the procedure in the requested URL by using the N-Tier Authentication feature to connect to the database as the user returned from
    WPG_SESSION_PRIVATE.GET_DB_USER. ..... Note that N-Tier Authentication requires all schemas to be used for Portal user mappings to be granted 'connect
    through' privleges to the Portal schema (PORTAL30).
    The WWCTX packages are also used.
    So this is how it works with standard Portal
    - the document states that the WPG_SESSION_PRIVATE package is only accessible to the Portal schema
    - but I checked and it is also available to PORTAL30_SSO
    SQL> desc WPG_SESSION_PRIVATE
    PROCEDURE CREATE_SESSION
    Argument Name Type In/Out Default?
    P_COOKIE_NAME VARCHAR2 IN
    FUNCTION GET_DB_USER RETURNS VARCHAR2
    FUNCTION GET_LW_USER RETURNS VARCHAR2
    PROCEDURE GET_SESSION_INFO
    Argument Name Type In/Out Default?
    NUM_PARAMS NUMBER OUT
    PARAM_NAMES TABLE OF VARCHAR2(32000) OUT
    PARAM_VALUES TABLE OF VARCHAR2(32000) OUT
    PROCEDURE RESET_SESSION
    Argument Name Type In/Out Default?
    P_COOKIE_NAME VARCHAR2 IN
    In my case only the Login Server (PORTAL30_SSO) is going to be used/installed
    - the SAMPLE_SSO_PAPP application will only work if the DAD used to access is it set to use Basic authentication, i.e. the actual integration with the Login Server
    is done in the sample application code calls, stored in the database
    - when a DAD has enableSSO=yes it automatically accesses Portal (PORTAL30) packages to implement N-Tier authentication
    I'm currently testing:
    1. Configuring the SAMPLE_SSO_PAPP sample as documented with a DAD with Basic authentication
    2. Amending the ssoapp procedure to set context to another (db) user on successful authentication:
    wwctx_api.set_context (
    p_user_name => 'SCOTT',
    p_password => 'TIGER' );
    3. If this works then set_context with get_lw_user instead
    I have now amended the ssoapp procedure as follows to print out
    1. The userid entered when the login box is presented
    2. The Database user which the Portal Lightweight user is mapped to
    3. The Lightweight user Portal has used for authentication
    Amendments to papp.pkb:
    (ssoapp procedure, declare db_user_info and lw_user_info as VARCHAR2 in declare section)
    htp.p('Congratulations! It is working!<br>');
    db_user_info := wwctx_api.get_db_user;
    lw_user_info := wwctx_api.get_user;
    htp.p('User Information:' || l_user_info || '<br>');
    htp.p('DB User Information:' || db_user_info || '<br>');
    htp.p('LW User Information:' || lw_user_info || '<br>');
    The following shows the interesting results from my testing:
    - if the user owning the sample_sso_papp package is PORTAL30_SSO then the call to wwctx_api.get_db_user succeeds
    - if the user owning the sample_sso_papp package is a non-portal schema e.g. SSOAPP below the call to wwctx_api.get_db_user generates a User Defined exception
    Steps to test:
    Created new schema SSOAPP on the database
    - edited it in Portal and checked the use this schema for Portal users checkbox
    - created new Lightweight user SSO_LW in Portal, mapped it to SSOAPP schema
    - created new Lightweight user SSO_SCOTT in Portal, mapped to SCOTT schema
    - loadjava -user ssoapp/ssoapp@portal30 SSOHash.class
    - sqlplus portal30/portal30@portal30
    @provsyns ssoapp
    - sqlplus ssoapp/ssoapp@portal30
    @loadsdk.sql
    @loadpapp.sql
    Created DAD with basic authentication SAMPLE_SSO_PAPP
    - username: ssoapp
    - default home page: sample_sso_papp.ssoapp
    Registered the Sample SSO Partner Application with the Login Server and ran regapp.sql
    Commented out the calls to get_db_user in papp.pkb to avoid exception
    - called http://<server>/pls/sample_sso_papp
    - logged on as SSO_LW/sso_lw
    - got output:
    Congratulations! It is working!
    User Information: SSO_LW
    LW User Information: PUBLIC
    So the Portal lightweight user is not returned as SSO_LW
    if anyone knows why the Lightweight User in my test is returned as PUBLIC not SSO_LW
    Best Regards
    MIchael

    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Did you check the Zoom setting?
    Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
    If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

  • "cacheHostInfo is null" and Add-SPDistributedCacheServiceInstance : Object reference not set to an instance of an object.

    I am working on a standalone install Sharepoint 2013 (no Active Directory). I found newsfeed feature is not available and checked Distributed Cache service is stopped. When start it “cacheHostInfo is null” is returned.
    I checked the Windows service “AppFabric caching service” is stopped because the default identity “Network Service” not work. Then I change the AppFabric service identity to use “.\administrator” (which is also the sp farm administrator) and the service can
    be started.
    However the “cacheHostInfo is null” when try to start Distributed Cache service in central admin.
    I searched on web and found this blog: http://rakatechblog.wordpress.com/2013/02/04/sharepoint-2013-spdistributedcacheserviceinstance-cachehostinfo-is-null/
    I tried to run the script but it return error:
    Add-SPDistributedCacheServiceInstance : Object reference not set to an
    instance of an object.
    At C:\root\ps\test.ps1:8 char:13
    + $whatever = Add-SPDistributedCacheServiceInstance
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (Microsoft.Share…ServiceInstance:
    SPCmdletAddDist…ServiceInstance) [Add-SPDistributedCacheServiceInstance]
    , NullReferenceException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletAddDistr
    ibutedCacheServiceInstance
    I am not sure what went wrong. Please give me some idea? Thank you for any comment!

    Can you deploy Active Directory as installing without is not a supported installation scenario - http://support.microsoft.com/kb/2764086.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for

  • Using iTunes with multiple logins

    Having just taken delivery of a new PC and set up user accounts for my g/f & I, I have hit a problem with iTunes. I installed it (and the latest update) under my login and copied the database from my old PC into the shared music folders, imported the

  • How to find the contents of proc from top command

    I had a doubt related to how to find the contents of a procedure or the statements from the PID displayed in top command if it can be done from TOAD or sqlplus. If we can find out the details from top like:- 21211 oracle 16 0 3228 1012 764 R 0 0.0 0:

  • Can I add a Youtube video to a PDF with Acrobat 9 Pro?

    I was reading about PDF portfolios in Acrobat X Pro: http://www.adobe.com/products/acrobatpro/online-eportfolios-multimedia-presentations.html It says and I quote, "With Acrobat X Pro, you can also present live web content. For example,  you can inse

  • Mail gone mad

    Recently had trouble with my mail sig, long story tried all the tricks permissions, repair discs lastly tried to rebuild that mailbox and poof, all mails gone in two accounts, tried to use time machine would not allow me to go back more than 3 days,

  • Font and labels

    Hi, elementary question... in my program I have many labels as class variables. I initialize them all in init(). How can i change their font. All of them should be the same font, just not the default one. Also i would like to make certain ones bold.