When userenv('CLIENT_INFO') return too much information?

We just applied some oracle patches and now when when I do a "select trim(userenv('CLIENT_INFO')) from dual", I am getting PETERRA:1389409584404465. All I want/need is JUST the user name (PETERRA). This worked before our DBAs applied the patch(es).
Is there a setting I can change to only get the user name - not the "extra" information?
Please advise.

SleepDeprivedInSeattle wrote:
We just applied some oracle patchesWhat patches?
and now when when I do a "select trim(userenv('CLIENT_INFO')) from dual", I am getting PETERRA:1389409584404465. All I want/need is JUST the user name (PETERRA). This worked before our DBAs applied the patch(es). See +{message:id=10387545}+ : this appears to be a bug or undocumented change in behaviour introduced at some point between 3.0.0 and 4.1.1.
It's not just the length/additional data, its the difference between the information returned by <tt>CLIENT_INFO</tt> and <tt>CLIENT_IDENTIFIER</tt> (builder session ID and runtime app session ID?)
Oracle didn't respond to that thread.
Is there a setting I can change to only get the user name - not the "extra" information?Not that I'm aware of. Can you trim off the extra info?

Similar Messages

  • Too much information

    Hello everybody,First of all I have to say that I'm not a Netapp expert as you will see.After some time without receivng the autosupport, with the help of NetApp support we solved that problem.Now I receive daily one mail with performance data and one mail fron each storage. Each mail contains about 20 files. Some of them compressed and some plain text files. Too much information. Also I supose ver complete information. But I can't analyze daily those files.The problem that I have is that I'm not an expert.In our IT Dept we are two people and we receive similar information from other resources: Backup copies results, VmWare chenges of status, and so on.When we receive those mails we only check if in the boy of the e-mail some error is metioned.I wonder if NetApp (our storages) is capable to send me an e-mail only with relevant error messages. Please undestand me. All this information is very useful to solve problems and know the storage status, but is too much information if I need only to notice that "there is a problem". Excuse me for this "simple" problem and my poor English. Thank you all. Daniel

    Hi Daniel, What you need to do is divert your autosupport to Netapp ASUP DataWare House instead of your email id . Any support can help setting up filer configuration for the same.  For getting notified for failure messages , you can use "myautosupport" tool. it is available for any one who has purchased storage system from Netapp The flow is1.  Login to http://mysupport.netapp.com/myautosupport/2. Search for System by Serial Number, System id, Host Name3. Select Notification 4. Select appropriate error messages for which you need asup     For errors refer below sections : "Section:Error Messages"5. Enter email id and submit

  • IMovie HD - Trouble!  Video is skipping like it has too much information??

    On my current iMovie HD project, the Video portion of the playback is skipping during the last song I am working on. It's almost like there is too much information during that song, but I have not added transitions, sound effects, etc to the clips.
    I have tried deleting song and adding a different song, same problem. The other 30 minutes of the movie play perfectly.
    Wowsers. Any help would sure be appreciated. Thanks.

    Thank you Jason for responding so quickly.  I clear the auto-linking and do my own linking between tables.  As you said, "there's nothing smart about CR's smart links". 
    And I was referring to Microsoft SQL Server 2005 version 9.0.3073.  The problem I initially had was linking CR to the server.  Thankfully I had a lot of help from the linking forum that helped me with it.  I'm running Windows 7 and it appears the operating software has two ODBC one is 32 and the other 64. In the ODBC Data Source Administrator the user DSN is set to the SQL Server.
    Back to this problem.  Trying to figure out the double item numbers and I have tested it with only that one particular table and did not link it to another.  I also have tried it with linking it to other tables to see if somehow that could put a restriction on the information.  The parameters really doesn't work here unless I'm setting it up incorrectly.  Nor does the Select Expert really do what I need it to do. The options I can choose from: Itemnumber:  is any value, is equal to, is not equal to, is one of... nothing gives me the option to say only choose the child if the child was purchased.  And I'm not advance enough to figure out a script to do it.
    Per sales order (I have the report to group by the sale order number) I need it to list the correct item that was purchased by the customer.  The report pulls into the detail section of the report the parent and child item number when only the child item was ordered and not the parent.
    I have a feeling you are correct in saying
    Don thank you very much for the registry edit.  It has saved me a step in creating new reports.
    Thank you both again,
    Cindy W.

  • Auditing all users file access - too much information

    Hi, I have enabled a GPO With the following: Computer Configuration\Policies\Windows Settings\Security Settings\Advanced Audit Policy Configuration\Audit Policies\Object Access -> Audit File System -
    Success on a file server.
    After that, I have enabled successful Create files/Create Folders on a folder for the built-in group Everyone.
    That part works fine, I can see when users are creating files on the folders. But I also get a lot of Extreme amounts of other events logged in the Security log, and everything is coming from the backup agent running on the server (NetBackup in this case).
    How come that a backup agent is creating the events like this? It makes filtering much harder afterwards. The business requirements is to audit Everyone who is adding files to a specific folder, not all the rest of the server. The server
    is Win2008 R2.
    Example:
    An attempt was made to access an object.
    Subject:
    Security ID: SYSTEM
    Account Name: FILESERVER01$
    Account Domain: MYDOMAIN
    Logon ID: 0x3e7
    Object:
    Object Server: Security
    Object Type: File
    Object Name: \Device\HarddiskVolumeShadowCopy58\Windows\winsxs\amd64_microsoft-windows-audio-audiocore_31bf3856ad364e35_6.1.7601.18619_none_d4cab625fb3adf96\audiosrv.dll
    Handle ID: 0x3c4
    Process Information:
    Process ID: 0x1048
    Process Name: C:\Program Files\VERITAS\NetBackup\bin\bpbkar32.exe
    Access Request Information:
    Accesses: WriteAttributes

    Hi Steve,
    I feel your pain, I turned on logging on a file server and found the security log filling 4GB in a couple of hours. I think the key is being very selective about what you audit. I found this article useful and it had some powershell and ideas for helping
    make sense of the information overload - http://blogs.technet.com/b/mspfe/archive/2013/08/27/auditing-file-access-on-file-servers.aspx
    In my opinion though you really need a third party solution to make this viable, two I've looked at are
    Netwrix File Server Auditor and
    FileAudit which seem very similar in functionality and ease of use. These basically read in the event log to provide long term archive and reporting on it.
    Good luck,
    Tim

  • Too much information, Mail!

    Recently my Mail has started showing me a lot of extra information in the emails that I receive. Instead of just showing me who it's from and when it was sent and basic details, it is showing "X-sieve", "Return-Path", "Received" about 5 times, X-Scanned-By, and all kinds of other stuff. How can I get rid of this? Thanks!

    Good point! It never occurred to me that the preference could be set inadvertently.
    I assumed that repeatedly executing the key sequence ⇧⌘H while a given message was selected was the cause for this, probably when a user intended instead to hide Mail.

  • When particular website taking too much time and browser hangs then open website after 2 min.

    when open www.mjkcollege.co.in in mozilla firefox it hangs and after 2 mins it open. this is only in firefox either IE 9 work better or even crome works fine without hangs. why?

    Hi rkvggn8
    try to '''clear cookies and cache''' from '''Firefox (orange) button''' > '''Clear Recent History''' > '''Time range to clear''' select '''Everything''' > click on '''Details''' and '''check Cookies and Cache''' > '''Clear Now''' and check it again.
    if the above does not solve the issue try to delete or rename cookies.sqlite (as cookies.sqlite.old) and delete also other cookie files if exist like cookies.sqlite-journal in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] in case that the file cookies.sqlite is corrupted.
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Too much information to display

    I am getting results from a database and the number of field to display are so many that they cannot fit in a line.. How do I fit them in the page horizontally ? Vertically I have the rows.. I want to print it.. so it cuts off after a certain point..

    If it doesn't fit then it doesn't fit. You can create some kind of paging system so only the first X amount of columns show on the screen and you can provide a link to show the next X amount of columns.
    -S-

  • When guessing your password too much, it comes up with ipod is disabled. How do you fix it?, when guessing your password too much, it comes up with ipod is disabled. How do you fix it?

    The screen on the ipod says, "Ipod is disabled. Connect to itunes." How do I fix it?

    This is asked and answered many times every day.
    The forum search bar is on the right side of this page as is the "More Like This" section.  You will find your answer there.

  • Too much errors/messages in Web Analysis reports stops workspace

    Too often workspace stops to work for the client with the following (example) messages. It seems that too much informational and error messages from reports (like a non working report link or missing member) gives the workspace client so much trouble that login off or closing the browser is the only solution. This seems not the right workaround. Anyone experiencing the same?
    Internet Explorer popup:
    Line: 2608
    char: 4
    Error: 'undefined'is null or not an object
    Code: 0
    URL: https://[workspaceserver]/workspace/index.jsp
    {next}
    Internet Explorer popup:
    Line: 2688
    char: 3
    Error: 'undefined'is null or not an object
    Code: 0
    URL: https://[workspaceserver]/workspace/index.jsp
    In a Hyperion(r)Workspace-error popupscreen:
    An error was encountered while closing all content
    Can only remove children
    Internet Explorer popup:
    Line: 1385
    Char: 4
    error: 'this.leftComp.getDataModel()'is null or not an object
    Code: 0
    URL: https://[workspaceserver]/workspace/index.jsp

    it seems that all errors are related to the migrated anaqlyzer report. In the new 931 version less characters are allowed to use than the old 71 version.
    In the main name of the reportgroup the migration just rplaces the wrong characters. But links and url insite reportgroups and reports are not changed during migration. Activating (clicking on it) such links is the main cause of the freeze.

  • How much information is Diagnostics and usage supposed to capture?

    I think that the log has too much information in it. It list in plain text what apps I've downloaded that day , how many times I've accessed my camera from the lock screen, the number of times I've entered my pass code correct and not. There's lots more too. Basically every app I've purchased, every time I've charged Or turned on this phone has been noted in the logs.  Is this expected? Sorry this is my first iPhone. I've already switched from automatically send to don't send.

    I found some info on the web, seems it's all quite normal. And it is sent anonymously, so I don't feel like it matters much now. Thanks.

  • Too much resizing for capture sharpening?

    For images that will be offset printed 2.25" wide by various lesser heights, is there a disadvantage to shooting large raw captures? At first I wanted to keep a large original 3008 x 2000 ppi as a master in case we wanted a larger print. But I'm not sure if exposure and other develop settings are degraded when image is resized too much. Would capture sharpening be less effective if image is reduced so much? I'm trying to test whether I should set a smaller file size when shooting, or hold certain develop settings till after resizing.
    Thank you,
    Tim

    Tim, I think that Stu may have misunderstood your potential workaround. If I understand correctly, your plan was to:
    1. capture sharpen in LR
    2. export from LR at the new size
    3. re-import the newly resized version into LR
    4. Use the sharpening tools on the resized version to output sharpen
    5. Export the output sharpened resized image at "full-size" (i.e. no further resizing on export)
    And your question was "if both LR and PS are being used to sharpen the same re-sized image, what can PS do that LR cannot," right?
    Well, I have also been experimenting with this workaround and have found it to be satisfactory for many images. From what I can tell, USM in Photoshop is different in at least these potentially significant ways:
    1. PS has Threshold which, from what I can tell, works differently than Detail. You should play with each to get a feel for when it might be advantageous to use each. I have found threshold to be most useful for keeping PS from applying sharpening to fine-grain noise in the image. However, most fine-grain noise will be "averaged out" when downsizing, so this might not be an important difference.
    2. PS can apply a much greater amount of sharpening. Your need for huge amounts of sharpening will depend on the image.
    3. PS can use radii less than 0.5, which can be very useful for small thumbnail-size images.

  • How to solve the issue if BIP field condition is too much?

    When I calculate field in BIP Word Builder XML such as <?sum(//Total_of_Begining_Balance_ID14[../CategoryCodeGl022_ID9="1101"])-sum(//Total_of_Begining_Balance_ID14[../CategoryCodeGl022_ID9="1102" ])?> in Advance. But when the condition is too much, I reach the limit of Advance window. How can I solve this problem? Is there any workaround?

    Did you try entering the tags in the Help Text tab of Text Form Field. When you click Add Help Text button on the Form Filed you'll find two tabs (Status Bar and Help Text). If the max character length is reached in the first tab you can continue the text in the second tab.

  • HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

    When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

    It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
    Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

  • TS1702 After upgrading my iphone 4s to ios 6 it giving too much problem one battery and other is that when ever i open emails or safari or facebook it automatically comes to main page

    please contact me i am receiving too much problem in iPhone 4S after upgrading it to ios 6
    it automatically comes to main page when ever i used to open surfing ,safari,gmail,viber and etc...
    <Personal Information Edited by Host>

    NEVER post your personal info on a public forum such as this.  This is a user-to-user tech support site.
    If your phone was NEVER jailbroken or hacked to unlock, try these steps as needed:
    1. Reset phone (no data loss):  Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
    2. Restore phone in iTunes using a backup (no data loss)
    3. Restore phone in iTunes as new, without using a backup.

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

Maybe you are looking for