Client login to OS/X server doesn't work after upgrade to 10.9.3

I have been running a Mountian Lion Server with open directory to handle several Mac's at home. After upgrading from 10.8.x to 10.9.3 a few days ago login from the client computer with 10.9.3 does't work. If I turn off Wi-fi, login works, and I can access everything after re-enabling wi-fi.
Works with client computer and 10.9.2. It also works with login to wiki on this server, using safari from my computer.
/Casi

I have several network user set up on a server computer. This computer, macMini, is running 10.9.3 and the latent version of OS/X server.
When logging in on a MacBook PRO with 10.9.3, and the computer is on the same network as the server, wi-fi or Ethernet cable, i'm not granted access to the network accounts. The screem-shot above is from the server log.
When not connected to the local network does login work.
Same issue with two network accounts. But, when trying a MacBook Air with 10.9.2 is it working with both these networks accounts.
If disable wi-fi, login and then enable wi-fi can I access all resources on the server as shared disks and replicate home directories. Same procedure works with the 10base6 Ethernet cable, i.e. Pull out the contact, login, put in in the contact.

Similar Messages

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

ITunes doesn't work after upgrade to iOS 6

iTunes doesn't work after upgrade to iOS 6. The white screen with gray tape above appears, and nothing more happens. Reinstalling/restoring iOS doesn't help. I have contacted support team in my country (Russia) by phone, but they could not solve the problem. Is there downgrade to iOS 5.1.1 available?

What printer are you using? Is it listed here:
http://support.apple.com/kb/ht4356

TS4268 FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

Hi AnaMusic,
It was working perfectly before the upgrade to ISO 6.0.1, but now I can't log in using my apple ID ... I have tried all suggestion from Tom but nothing does work. I keep getting the message "FaceTime can't log in, check your network" is nothing wrong with my network everything else works fine, I can log in into FaceTime using my IPad 2 and my apple ID.
I'm currently working in Korea, but I bought the IPad in Australia,
Regards,
Namur

MDM Server doesn't start after upgrade to SP 5

hi,
i'm not used to sap services on windows hosts.
After the Update from 7.1.04 to 7.1.05 the mdm server doesn't start. I found only a few logs (unter c:/usr/sap/SID/MDS00/work). Most of them from sapcpe (without errors or warnings). Only the sapstart.log contains a bit information:
SAP-R/3-Startup Program
Starting at 2010/08/16 21:29:18
Startup Profile: "C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest"
Starting Programs
(1684) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/mds.lst
(976) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/shared.lst
(3632) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/sapinstance.lst
(2172) Execute: C:\usr\sap\MDM\MDS00\exe\mdmcpc.bat C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest.INI C:\usr\sap\MDM\MDS00\config\mds.ini
(3652) CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3652 died unexpectedly, restarting process
(3612) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3612 died unexpectedly, restarting process
(2364) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 2364 died unexpectedly, restarting process
(3576) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3576 died unexpectedly, restarting process
(3588) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3588 died unexpectedly, final process restart.
Process will not be restated in the future because of frequent failure.
(1396) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
This isn't really much I can work with. In the sapmmc I found the Option Developer Trace. I try to 'switch it on', but there is no difference.
With 7.1.04 the server was running well.
I happy for any suggestions

Hi,
Please check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed.
hope it helps you.
Best regards,
sudhanshu

Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

Hi,
Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list box in
forms, although user has chosen something from the drop down list box, the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files. After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
can not open this Internet site. The request site is either unavailable or can
not be found. Please try again later", although the server and the files are all
in local host server.
Please help. Thanks

Did you update your workshop application files and recompile your application?
A few things changed between GA and sp2, some annotations were renamed, and some
were added.
If you open up your application in Workshop sp2, it should given you the option
to upgrade your application.
Failing that, you may need to go through the code that is not performing as it
was before and check whether it was not utilising a bug that was fixed in sp2
and thus causes it to not function correctly now.
"Cynthia" <[email protected]> wrote:
>
Hi,
Our application worked on workshop 8 sp1. After we upgrade system from
sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list
box in
forms, although user has chosen something from the drop down list box,
the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files.
After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet
Explore
can not open this Internet site. The request site is either unavailable
or can
not be found. Please try again later", although the server and the files
are all
in local host server.
Please help. Thanks

[solved]wacom doesn't work after upgrade to xorg 1.6 and kernel 2.6.29

hello..
i have already posted about that in testing-forums, but since xorg 1.6 and kernel 2.6.29 have moved to extra, though i'd create a seperate topic about that.
after i have upgraded to xorg 1.6 and kernel 2.6.29 my wacom device (as built-in, not usb) on my thinkpad x41t stopped working.
before upgrade i have used xorg with hotplugging enabled. everything worked fine.
after wacom stopeed working i removed everything regarding input devices from xorg.conf -> no change
put an fdi-file for wacom -> no change
installed linuxwacom-dev -> no change
i don't really know, if it's a kernel or an xorg issue. loading wacom drivers manually still doesn't solve the problem. no warnings or errors about wacom in xorg-log or messages.log
how could i check, wether my system recognizes the device properly at all? it doesn't show up in lspci or in lsusb.
any help would be great.
Last edited by lynucs (2009-04-14 18:57:17)

well, upgraded again to xorg-server 1.6, disabled hotplugging, installed linuxwacom-dev from aur and the wacom works as allways. (had to edit xmodmap one more time, since kbd returns other keycodes than evdev does :-| ). no matter, done is done.
but intel driver returns broken graphics if i rotate screen with xrandr.
i guess there is no way around this execpt switching to the ultra-slow legacy driver?
just for comparison - glxgears fps:
intel: ~900fps
intel-legacy: ~280fps
Last edited by lynucs (2009-04-14 18:56:48)

Google Maps Widget doesn't work after upgrade to Safari 4.0

After a lengthy bit of trouble shooting with an iWeb specialist yesterday, we reached a conclusion that somehow installing the release version of Safari 4.0 (released Monday, 6/8) causes the GoogleMaps widget to not function or display properly. Using backup harddrives of recent systems, the widget worked properly in OS X 10.5.7 running iWeb 3.0.1 with both Safari 3.2 and the BETA VERSION of Safari 4. On that same system, once I download and installed the release of Safari 4., the maps widget would not work or display properly.
To describe what doesn't work: None of the options (search field, address bubble, or zoom controls) appear regardless of what the user selects in the HUD when creating or editing the content. I am unable to pan and/or scroll around the map within its bounding box at all. The only thing I am able to do is edit the address field in the HUD and end up with a map with that location centered in the window.
The AppleCare specialist didn't have much response in that I think this is a brand new and VERY obscure bug.
I am curious to know if anyone else has exprienced this condition.

It may be obscure in iWeb but the Safari 4 update has messed up the Google maps in iPhoto big time. Be sure to report it as they are all related to the Safari 4 upgrade and probably only be solved by a Safari fix.
http://www.apple.com/feedback/iweb.html
OT

Report doesn't work after upgrading Apex 4.1

Hi,
We have configured Apex to use BIP report, everything works fine until upgrading to 4.1.
The error message we got is below:
Error processing request. ORA-06502: PL/SQL: numeric or value error ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 690 ORA-06503: PL/SQL: Function returned without value
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 690 ORA-06503: PL/SQL: Function returned without value
component.type: APEX_APPLICATION_AUTH
component.id: 136283513153502444
component.name: HTML DB
error_backtrace:
ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 690
ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 1544
ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 1681
ORA-06512: "APEX_040100.WWV_FLOW", line 7154
It seems there's some problem with the source of the query (Shared Components->Report Queries). But we couldn't find the reason. Is it some kind of bug? Also, is there a way to know which line of the query raise the error?
Thank you in advance.

Hi Patrick;
I'm Xavier from Barcelona(Spain), I have teh same problem after upgrade my Apex 4.0.2 to 4.1. I print across BI Publisher, but now is impossible, when I try to print Apex send me this message :
Error Error processing request.
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.UNHANDLED_ERROR
ora_sqlcode: -20001
ora_sqlerrm: ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
component.type: APEX_APPLICATION_AUTH
component.id: 6517320063874096
component.name: ESTUDIVIVES
error_backtrace:
ORA-06512: en "APEX_040100.WWV_FLOW_PRINT_UTIL", línea 117
ORA-06512: en "APEX_040100.WWV_FLOW_RENDER_QUERY", línea 1619
ORA-06512: en "APEX_040100.WWV_FLOW_RENDER_QUERY", línea 1681
ORA-06512: en "APEX_040100.WWV_FLOW", línea 7154
I try to use APache FOP, with the same result, and try with a new version of Apex 4.1 (not upgrade) in a new server, but with the same result.
Please Patrick, can you help me ?
Thanks in advance.
Xavier.

Right headset doesn't work after upgrading iOS

I use iPhone 4 32GB. I upgrade the iOS from 5.1.1 to 6.1.3. On the previous iOS, i don't have any problem. But after i upgrade my phone, my right headset doesn't work. I've clean the jack, plug, etc; I've tried to change the sound settings, music setting, etc, but it doesn't change anything. My headset still mute, exactly the right side. The left one is still okay. I've tried to plug another jack and nothing change. Anybody help :'(

If you've made sure it's clear of any debris/dust, tried using a different pair of headphones and it still didn't work, I would contact Apple with the hardware issue and find out what your replacement options are. It might be conincidental, but a software update shouldn't change the jack on the phone because that is hardware.

The application uninstaller ,created with Labwindows CVI, doesn´t work after upgrading to 2010 version

Hi,
I have been working with Labwindows CVI 2009 with no problem but after upgrading to 2010 version I have the following problem:
When i´m going to execute the unistaller, either from Windows Control Panel or directly from the uninst.exe icon, it doesn´t work. The PC thinks a few seconds and does nothing, and it happens with all the applications I build with Labwindows CVi 2010.
Thanks,
Asier
Solved!
Go to Solution.

Hello -
Are you installing these distributions on a non-English operating system? If so, the first thing to try would be the workaround listed on this known issue.
The known issue only lists Italian OSs as the troublesome OS, but it could actually happen on many different non-English OSs. I will update the text accordingly the next time I update the known issues list.
NickB
National Instruments

Installer doesn't work after upgrading to 10.3.3

Hi,
I'm trying to upgrade from 10.2.8 to 10.3.9. I bought the upgrade to 10.3.3 and installed it (with the upgrade feature, not the archive and install) and now when I try to open the .pkg file for the upgrade to 10.3.9, the installer doesn't work. It opens and a window comes up with a large "X" in the background, but the main dialog box is blank, the two buttons on the bottom right corner of the window are blank, and clicking them doesn't do anything. I know it's the installer because the same thing happens when I try to install other programs.
I can't use the software update feature because I can't get my mac to work with my DSL connection - but that's another story.
Thanks in advance for your help!
G4 Mac OS X (10.3.3) dual 1 GHz - 768 MB ram

You're Welcome John-Paul!
Yep, that's the problem!
Tiger is available for purchase at The Apple Store (U.S.).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
A Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, FastMac, etc.
Be sure not to again purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the PPC 10.4.8 Combo Update.
Panther System Requirements
Additional Panther System Requirements
Tiger System Requirements
Mac Model Compatibility & Requirements For OS X
Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
AppleRescue sells a Tiger installation set on CDs.
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

Pages doesn't work after upgrading to Mountain Lion

I'm not able to launch Pages 09 (neither Numbers nor Keynote) after having installed Mountain Lion. I've tried to reinstall it twice from the original install disc, but still doesn't work.
Thanks for the help

If you migrated iWork from another computer, or dragged it over, or had a demo version or previous version on the System, there can be missing or wrong files in your System.
Do the Complete reinstall:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
…and see if that fixes it.
Peter

Mount volume script doesn't work after upgrading to Yoesmite

I just upgrade my Mac OS to Yosemite and the boot up mount script doesn't work again.
try
mount volume "afp://admin:[email protected]/Multimedia/Music"
mount volume "afp://admin:[email protected]/workspace"
end try
Should I modify the mount script and how to do that?
Thank you so much.
Matthew Ho

I am having the exact same problem. I just did a complete re-install of max os x and did all of the updates..my hard drive had crashed so i had to replace it. lot's of fun.. and after the last upgrade i can't use my sound at all.. the sound shows that it's all the way up but it has the "no Smoking" sign as well..
i have tried to restart.. change options and whatever else i could .. i did notice that when i enable the option to show the sound icon on the main bar that there is just a blank spot where it should be.. and i can't change it form there either because it just doesn't show..
any one seen this before.. ?
all my other Mac's work fine..
please help..

IPod in iPhone 3Gmusic doesn't work after upgrade to iOS4

My iPhone is very unstable after upgrade to iOS4 and one major failure is that iPod music doesn't work properly, some song (recently purchased from iTunes) cannot be played even if it is in the list. There are a lot of new space in memory after upgrade, seems songs are removed or compressed in some stupid way.
Spotify is also working like **** after upgrade to iOS4. Also big problems with the phone being slow and hanging in many different kind of modes.
From being a real iPhone fan, I am very disappointed. Maybe Apple think they are immortal now and think they can release any kind of crap and still keep their customers...

Try resetting the App Store and Clearing Cookies.
Reset Learned from Old Toad
App Store support. There is troubleshooting and a contact link.
Support
Time Machine
Inherit a Backup
Inherit a Backup (2)

Client login to OS/X server doesn't work after upgrade to 10.9.3

Similar Messages

Maybe you are looking for