CLIENT_OLE2 - Attempting to insert additional rows into a table in MS Word

I cannot find the commands to perform the above. I have looked at the Microsoft site but it only gives the VB equivalent and I cannot work out the syntax for CLIENT_OLE2 commands. Does anyone know where I can find a list of Word.Application commands that directly correspond to the old Word.Basic commands?

Jeff·Þ·Bohrer wrote:
2) Why is it that after every other iteration the row values are erased?
Classic race condition. dump the for loop and p-node and just wire the 2D array to the table terminal.!
I'm not seeing the race condition. What I am seeing is the table emptying after the last element was written to it on every other run. I saw watched this with highlight execution on.
But I'm in full agreement with just writing to the terminal. It is a 1D array, so you will need to use a build array and transpose 2D array in order for it to write properly.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Error inserting a row into a table with identity column using cfgrid on change

I got an error on trying to insert a row into a table with identity column using cfgrid on change see below
also i would like to use cfstoreproc instead of cfquery but which argument i need to pass and how to use it usually i use stored procedure
update table (xxx,xxx,xxx)
values (uu,uuu,uu)
     My component

    <cffunction name="cfn_MediaType_Update" access="remote">
        <cfargument name="gridaction" type="string" required="yes">
        <cfargument name="gridrow" type="struct" required="yes">
        <cfargument name="gridchanged" type="struct" required="yes">
        
        <cfset var colname="">
        <cfset var value="">
        
        <cfswitch expression="#ARGUMENTS.gridaction#">
            
            <cfcase value="U">
                
                <cfset colname=StructKeyList(ARGUMENTS.gridchanged)>
                <cfset value=ARGUMENTS.gridchanged[colname]>
                
                <cfquery datasource="#application.dsn#">
                UPDATE SP.MediaType
                SET #colname# = '#value#'
                WHERE MediaTypeID = #ARGUMENTS.gridrow.MediaTypeID#
                </cfquery>
            </cfcase>
            
            <cfcase value="D">
                
                <cfquery datasource="#application.dsn#">
                update SP.MediaType
                set Deleted=1
                WHERE MediaTypeID = #ARGUMENTS.gridrow.MediaTypeID#
                </cfquery>
            </cfcase>
            <cfcase value="I">
                
                <cfset colname=StructKeyList(ARGUMENTS.gridchanged)>
                <cfset value=ARGUMENTS.gridchanged[colname]>
                
               <cfquery datasource="#application.dsn#">
                insert into SP.MediaType (#colname#)
                Values ('#value#')
                </cfquery>
            </cfcase>
        </cfswitch>
    </cffunction>
my table
mediatype:
mediatypeid primary key,identity
mediatypename
my code is
<cfform method="post" name="GridExampleForm">
        <cfgrid format="html" name="grid_Tables2" pagesize="3" selectmode="edit" width="800px"
        delete="yes"
        insert="yes"
            bind="cfc:sp3.testing.MediaType.cfn_MediaType_All
                                                            ({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{cfgridsortdirection})"
              onchange="cfc:sp3.testing.MediaType.cfn_MediaType_Update({cfgridaction},
                                            {cfgridrow},
                                            {cfgridchanged})">
            <cfgridcolumn name="MediaTypeID" header="ID" display="no"/>
            <cfgridcolumn name="MediaTypeName" header="Media Type" />
        </cfgrid>
</cfform>
on insert I get the following error message ajax logging error message
http: Error invoking xxxxxxx/MediaType.cfc : Element '' is undefined in a CFML structure referenced as part of an expression.
{"gridaction":"I","gridrow":{"MEDIATYPEID":"","MEDIATYPENAME":"uuuuuu","CFGRIDROWINDEX":4} ,"gridchanged":{}}
Thanks

Is this with the Travel database or another database?
If it's another database then make sure your columns
allow nulls. To check this in the Server Navigator, expand
your DataSource down to the column.
Select the column and view the Is Nullable property
in the Property Sheet
If still no luck, check out a tutorial, like Performing Inserts, ...
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/index.jsp
John

Insert Multiple rows into the table from that table data

Hi All,
I have a requirement like to insert mulitple rows into the table from that table data only(I need to replicate the data).
In this table primary key is composite primary key with all foreign keys.primary key also including the Date foreign key.I need to change that date at the of insertion.
INSERT
INTO myschema.Fact_page_performance
time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available ,
date_sk
VALUES
(SELECT time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available
FROM myschema.FACT_PAGE_PERFORMANCE_BACKUP
WHERE date_sk=20090509,20090510
But it is giving the error like missing Expression.
Could anyone please help to me.
Thanks and Regards
Swetha.

You can have either VALUES or SELECT not both
INSERT
INTO myschema.Fact_page_performance
time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available ,
date_sk
SELECT time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available
FROM myschema.FACT_PAGE_PERFORMANCE_BACKUP
WHERE date_sk=20090509,20090510;

Inserting multiples rows into a table using function or procedure..

How do i insert multiples rows into a table using function or procedure?
Please provide me query..

Use FORALL bulk insert statement...
eg:
procedure generate_test_data as
type cl_itab is table of integer index by pls_integer;
v_cl_itab cl_itab;
type cl_vtab is table of varchar2(25) index by pls_integer;
v_cl_vtab cl_vtab;
type cl_dtab is table of date index by pls_integer;
v_cl_dtab cl_dtab;
begin
for i in 1.. 100 loop
          v_cl_itab(i):= dbms_random.value(1,1000);
          v_cl_vtab (i):=dbms_random.string('a',20);
          v_cl_dtab (i):=to_date(trunc(dbms_random.value(2453737, 2454101)),'j');
     end loop;
     forall i in v_cl_itab.first .. v_cl_itab.last
          execute immediate 'insert into test_order values( :n, :str , :dt ) ' using v_cl_itab(i), v_cl_vtab (i), v_cl_dtab (i);
     commit;
end;

Inserting Multiple Rows into Database Table using JDBC Adapter - Efficiency

I need to insert multiple rows into a database table using the JDBC adapter (receiver).
I understand the traditional way of repeating the statement multiple times, each having its <access> element. However, I am just wondering whether this might be performance-inefficient, as it might insert records one by one.
Is there a way to ensure that the records are inserted into the table as a block, rather than record-by-record?

Hi Bhavesh/Kanwaljit,
If we have multiple ACCESS tags then what happens is that the connection to the database is made only once. But the data is inserted row by row.
Why i am saying this?
If we add the following in JDBC Adapter..logSQLStatement = true. Then incase of multiple inserts we can see that there are multiple
<i>Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','1000')
Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','2000')</i>
Doesnt this mean that rows are inserted one by one?
Correct me if i am wrong.
This does not mean that the transaction is not guaranted. Either all the rows will be inserted or rolled back.
Regards,
Sumit

Inserting multiple rows into a table (using sequences)

Hi!
I want to insert multiple rows into a db table, but I don't know how.
I know how to insert 1 row using a sequence:
I put all the fields in the jsp form's page and in the submit page I put something like this:
<jbo:Row id="myRow" datasource="ds" action="Update" rowkeyparam="MyRowKey" >
<jbo:SetAttribute dataitem="*" />
</jbo:Row>
But how can I insert multiple rows like this:
Id          Name
1          ana
2          monteiro
3          maria
Thanks!

Hi Chris,
I think this should give you what you need: Working with a Multiple Select List Item
--Jennifer

What is the best practice for inserting (unique) rows into a table containing key columns constraint where source may contain duplicate (already existing) rows?

My final data table contains a two key columns unique key constraint. I insert data into this table from a daily capture table (which also contains the two columns that make up the key in the final data table but are not constrained
(not unique) in the daily capture table). I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). Currently, what I do is to select * into a #temp table from the join
of daily capture and final data tables on these two key columns. Then I delete the rows in the daily capture table which match the #temp table. Then I insert the remaining rows from daily capture into the final data table.
Would it be possible to simplify this process by using an Instead Of trigger in the final table and just insert directly from the daily capture table? How would this look?
What is the best practice for inserting unique (new) rows and ignoring duplicate rows (rows that already exist in both the daily capture and final data tables) in my particular operation?
Rich P

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> My final data table contains a two key columns unique key constraint. [unh? one two-column key or two one column keys? Sure wish you posted DDL] I insert data into this table from a daily capture table (which also contains the two columns that make
up the key in the final data table but are not constrained (not unique) in the daily capture table). <<
Then the "capture table" is not a table at all! Remember the fist day of your RDBMS class? A table has to have a key. You need to fix this error. What ETL tool do you use?
>> I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). <<
MERGE statement; Google it. And do not use temp tables.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Inserting Multiple Rows into a Table

I am having problems insert multiple rows. I am using Table1.Row1.instanceManger.addInstance(1).
I try adding another line using
Table1.Row2.Cell2.value.#text= "TEST"
and I get an error acessor is unknown. I assume this is an index issue. Can someone tell me if I am doing this wrong and discuss table indexes?

The first thing I notice is that your variable, "num," isn't initialized in the FOR loop like I'm used to seeing.. The next thing I would try would be declaring my variables outside of the loop. Something like this maybe.
String query = null;
Statement stmt = null;
int rowsUpdated = 0;
for (int num = 0; num < 10; num++);     {
     query = "INSERT into apartment (apartmentID,blockID) VALUES ('"+num+"','"+aid+"')";
     stmt = con.createStatement();
     rowsUpdated += stmt.executeUpdate(query);
}Let me know how it goes.
-Aaron
http://www.WeKnowErrors.com/ A free Wiki for error codes and computer problems.

Inserting multiple rows into a table using a multiple-select list

I'm trying to figure out how to take the output of a multiple-select list (":" separated list of values) and use that to update a table by inserting multiple rows based on the values. Is there a straight-forward way to do that in APEX?
Thanks.
Chris

Hi Chris,
I think this should give you what you need: Working with a Multiple Select List Item
--Jennifer

Inserting multiple rows into database table

hi
I have a simple jsp/html page like this:
<h1>Enter Comments</h1>
   <select name = "g1">
        <option>10</option>
        <option>20</option>
        <option>30</option>
        <option>40</option>
        <option>50</option>
        <option>60</option>
        <option>70</option>
        <option>80</option>
        <option>90</option>
        <option>100</option>
    </select> <input name = "comment1" type = "text" size = "60"><p>
     <select name = "g1">
        <option>10</option>
        <option>20</option>
        <option>30</option>
        <option>40</option>
        <option>50</option>
        <option>60</option>
        <option>70</option>
        <option>80</option>
        <option>90</option>
        <option>100</option>
    </select> <input name = "comment1" type = "text" size = "60"><p>but when i say : String fruit=request.getParameter("g1");
String fruit=request.getParameter("comment1");
only one gets written into the table. How would I write them both into seperate rows of the table? e.g.
g1 comment1
g1 comment1
thank you all,

change the name of the second select and second text element.
You're only getting one because they're named the same, so the second one is overwriting the values of the first.
HTH.

Inserting multiples rows into a table

We have a job schedule table and a job date table.
Job Schedule
Job_ID Frequency
1 1234567
2 12-456-
Job Date
Job_ID Date
1 01-JAN-07
1 02-JAN-07
We need to insert all DATES (not number of day in the week) into the Job Date table for a job according to the frequency. For example, for Job_ID 1 daily and for Job_ID 2 only Mondays, Tuesdays, Thursdays, Fridays, and Saturdays of the year.
How can we achieve this?

This question smells like this one...
Inserting rows

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

Need to insert rows into 100 tables at a time

hi there,
below is our script for creation of 100 tables...
we need a plsql script, to insert rows into 100 tables at a single time...
please help us...vey urgent...
DECLARE
counter NUMBER;
sql_string VARCHAR2(2000);
BEGIN FOR counter IN 1..100 LOOP sql_string := 'CREATE TABLE emp_table'||counter||'
(id integer primary key, col_a VARCHAR2(42),col_b date,col_c number,col_d varchar2(20),col_e varchar2(20),
col_f varchar2(20),col_g varchar2(20),col_h date,col_i varchar2(20),col_j varchar2(20),col_k date)';
EXECUTE IMMEDIATE sql_string;
END LOOP;
END;
/

hi,
below is our procedure and the error we are getting...
Name Null? Type
ID VARCHAR2(10)
COL_A VARCHAR2(10)
COL_B VARCHAR2(10)
COL_C VARCHAR2(10)
COL_D VARCHAR2(10)
COL_E VARCHAR2(10)
COL_F VARCHAR2(10)
COL_G VARCHAR2(10)
COL_H VARCHAR2(10)
COL_J DATE
DECLARE
counter NUMBER;
sql_string VARCHAR2(4000);
BEGIN FOR counter IN 1..100 LOOP sql_string := 'CREATE TABLE emp_a'||counter||'
(id varchar2(10), col_a varchar2(10), col_b varchar2(10), col_c varchar2(10), col_d varchar2(10), col_e varchar2(10),
col_f varchar2(10), col_g varchar2(10), col_h varchar2(10), col_j date)';
EXECUTE IMMEDIATE sql_string;
END LOOP;
END;
DECLARE
counter NUMBER;
sql_string VARCHAR2 (2000);
BEGIN
FOR OuterCounter IN 1 .. 100 LOOP --- table prefix in which it is to be inserted
FOR InnerCounter IN 1 .. 100 LOOP --- records to be inserted
sql_string := 'INSERT INTO emp_a' || Outercounter || ' (id, col_a, col_b, col_c, col_d, col_e, col_f, col_g, col_h, col_j)
VALUES ('
|| InnerCounter || ', to_char( ''col_a''' || innercounter || '),'
|| InnerCounter || ', to_char( ''col_d''' || innercounter || '),'
|| ', to_char( ''col_e''' || innercounter || '),'
|| ', to_char( ''col_f''' || innercounter || '),'
|| ', to_char( ''col_g''' || innercounter || '),'
|| ', to_char( ''col_h''' || innercounter || '),'
|| ', to_char( ''col_j''' || innercounter || '), SYSDATE)';
EXECUTE IMMEDIATE sql_string;
END LOOP;
END LOOP;
END;
DECLARE
ERROR at line 1:
ORA-00907: missing right parenthesis
ORA-06512: at line 17
please check the procedure and write the correct one...

Help in inserting rows into a table

I have a table called acct_fact,
I need to insert rows in the table using a script but the problem is there's a column called seq_nbr which has random seq nbr of 14character length like 'ZWX98MGD9MVAD6J','ZWX98MG67RVAD6J' etc.,
While inserting rows I need to generate such seq_nbr for those columns and insert rows into the table, can I use any such mechanism in my insert query to insert such random nbr's while inserting rows into a table.
If so please suggest me

Hi Peter,
Thankyou for the quick reply:)
can you suggest me how to implement it here in my script snippet:
while read var_acct_nbr
do
echo "update acct_attr set acct_attr_exp_dt ='$ExpDate' where Acct_Attr_Value_Text='15' and acct_attr_exp_dt is null and person_id='LDCarrBillAgrm' and acct_nbr='$var_acct_nbr' ;" >> ./$DirectoryName/SQLQuery_$TimeStamp.sql
echo "insert into acct_fact values ('$var_acct_nbr','$ExpDate','$ExpTime','*seq_nbr*','N','ProjTereza','Remoção de acordo d; data de expiração: $ExpDate',null,'1','LDE',null);" >> ./$DirectoryName/SQLQuery_$TimeStamp.sql
done < ./$DirectoryName/ExpireAccts_$TimeStamp.LOG
the script takes each acct_nbr nbr form a input file and fires an insert statement.
The one in bold is the column where such sequence need to be inserted.can you help me in implementing the way you suggested in my script i.e., insert statement
Thanks in Advance:)
Edited by: rkrish on Jun 27, 2012 3:04 AM

How do i insert a row into Numbers

I'm new to numbers - how do i insert a row into a spreadsheet please? The spreadshet started life in excel and was imported and saved as numbers. I did try the help option but didn't seem to get the answer.

right click on the row tab then select the "Add Row Above" or "Add Row Below"

CLIENT_OLE2 - Attempting to insert additional rows into a table in MS Word

Similar Messages

Maybe you are looking for