Clip in use

Hey all,
I'm sure this question is out there somewhere but I couldn't find it.
Anyway, maybe I'm blind but in CS$ is there a Field you can add in the Project window to show you if a clip is In Use somewhere on the time time line--where it is or what sequence?
thanks!

Did you look at the metadata options, where you can enable that display?
Use the button at the top right corner of the project window to show the options (right click) and then select Metadata options to show these field options:
If that is not what you meant, maybe click on the specific clip in the project window and see something like this:

Similar Messages

  • Imovie on my ipad ...refuses to recognize AVCHD Video. Also when i remove video clips already used in a project, it is unable to recognize missing clips after I've put them back. How do I get around these 2 issues?

    My iMovie refuses to recognize, import, or work with AVCHD Video. It also refuses the same video clips even after I have converted them to Mp4. Also, when I delete a video clip already used in a project, then later import the same clip back to my ipad, the software is unable to recognize and find the clip again! Help! How do I get around these issues?

    Hi Craig,
    I also got the second problem. The storyboard on iMovie trailer has all these missing videos. If I import them on my iPad it doesn't find them.
    If you find a solution it would be much appreciated to share it here ... I'll do the same.
    Thanks,
    Rafael

  • Identifying which clips are used in browser

    I am learning FCP for the first time but I am extremely familiar with editing video on a PC. My version of FCP is 6.0.6. I really want a way to see in the browser which clips I have used in a sequence. I know I could manually mark each take by using a label but that is a huge time waste with hundreds of clips in my program. Show duplicate frames is helpful in figuring out if I have used a shot before but I want to avoid having to ever even put the same shot into the time line.
    If I have 100 shots and I have used 75, I want a fast way to see the other 25 shots in my browser so I don't waist time trying every shot to see if there are duplicated frames in my time line. And I don't want to have to manually change a label every time I edit in a shot for the first time.
    Premier does this so much better.
    Thank you.

    Thank you but I know how to enable "Show Duplicate Frames." I want to avoid needing to use this in the first place.
    In Premier's equivalent to the browser window we have a field labeled "used" and it's checked if we have used the clip in the time line / sequence. Then I can instantly see which clips I have pulled nothing from.
    Yes I could edit my piece and use the "Show Duplicate Frames" to find out I used 30 clips twice or more in a montage. I want to avoid putting the clips into the sequence it first place so I don't waste time. I also don't want to waste time editing a clip to the time line just to find out if I have used it before with the Show Duplicate Frames setting enabled. That wasts lots of time when you have a large number of clips. I don't want to try say 50 clips in the time line to find the 1 or 2 that I haven't already used.
    I want to be able to see what clips are used in any sequence from within the browser so I can quickly see what's left. This is not Show Duplicate Frames. Again I understand what that setting does and it is helpful but not what I am talking about.
    Thank you,
    David

  • Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the online.

    Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the only one.

    Use the search feature and type in Flash and there are like thousands of posts on this.
    You seem to think you are addressing Apple with your post.  This is a user forum and we are all users just like you.

  • I shot a video clip(800MB) using my iPhone4s but could not copy to my PC (windows XP),please help me

    I shot a video clip(800MB) using my iPhone4s but could not copy to my PC (windows XP),please help me

    Limitation of XP, videos over 500MB's can't be imported using Camera/Scanner wizard. Try transfering these Videos directly from your phone by selecting them in My Computer and dragging or copying the movie files to your computer's hard drive.

  • Clipping problems using SPDIF input on SB Live

    .Clipping problems using SPDIF input on SB Li've?Hello everyone
    I'm new to this community and I'm banking on someone being able to help me!
    I'm connecting a DAT player to the SPDIF input on my Soundblaster Li've card and recording using Audacity.
    Within Creative Audio HQ I've got the SPDIF volume level set to 00% (for starters, perhaps someone can explain why there is a volume control when I thought this signal was staying in the digital realm?!) and when I record in Audacity the resulting material clips with high transient sound... a piano, for example, distorts on the louder notes.
    I need to take the level down to about 70% (or the equivalent in Audacity would be 0.7 - the 2 'volume' controls are connected) to avoid any clipping.
    I've had the sound card years and used to use SoundForge without any problems. Any ideas why this is happening in Audacity?
    I'm using XP and?I have downloaded the latest drivers and turned off the MOBO onboard sound in my BIOS.
    I would be grateful for any assistance anyone can give.
    Best Wishes
    Steve

    paush wrote:
    Hi, I am trying to sample my old vinyl record collection using my Sound Blaster Li've! PCI (think that was the model - it was the original (not Value) version of the card with the seperate header for the coaxial digital and MIDI I/O). Unfortunately, I get severe clipping regardless of the recording volume on the Volume Control panel. I know that my photo pre-amp is capable of high voltage outputs and therefore wondered if anyone was aware of the sensitivity of the analogue line input in volts of this particular model? Many thanks.
    Regards, Paul.
    If your pre-amp is a phono pre-amp (with RIAA in-build), I suppose it's not the culprit for clipping.
    How have you set the recording and source (input) levels on Volume Control and Recording Control?
    Try adjust the recording level by the 'hights' (loudest outputs) of the record (you know those recordings so you can easily find those places (or you can look on vinyls surface where the darkest areas are --> loudest outputs)).
    jutapaMessage Edited by jutapa on 0-23-2006 :38 PM

  • How to find out where movie clips are used?

    When I look at FLA project tree, I see Use Count column next to a movie clip. How do I find where this movie clip is used?

    Hi,
    You can use Edit > Find and Replace panel and set Symbols to Search
    Hope this Helps
    Thanks!
    Mohan

  • I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1.  Thanks for any input.

  • Does Editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

    Does editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

    C5ELEN wrote:
    . Didn't we have that in 7?  Seems like I remember we could set the number of undo levels.
    Legacy FCP has Revert Project to return to the last saved version, and it has Restore Project to go back to one of the autosaved versions. The maximum number of undo's can be set in user preferences. A lot different than X.
    Russ

  • Extracting audio from video clip to use as narration?

    Hi there,
    I have a video clip in which I want to take the audio of actor speaking and put it onto another video.
    I.e. he is speaking about walking in the park. I want to take him speaking about walking in the park and put it onto the clip where he is actually walking in the park.
    How do I do this in premiere elements 10?

    Hi Bill,
    Thanks for the quick response. I guess my question now is how would I do those two things?
    In terms of exporting the audio, where can I find that option when I'm on timeline?
    What do you mean by "Alt-click" and what is a "muxed file"?
    Thanks again,
    Mallory
    Date: Fri, 13 Jan 2012 19:01:51 -0700
    From: [email protected]
    To: [email protected]
    Subject: Extracting audio from video clip to use as narration?
        Re: Extracting audio from video clip to use as narration?
        created by Bill Hunt in Premiere Elements - View the full discussion
    Welcome to the forum. There are several ways to accomplish this, and your choice might well rest on how you like to work, and what you are doing, such as Deleteing Video. First, you could Export/Share just the Audio as a PCM/WAV @ 48KHz 16-bit, from your Timeline, and Import that into a New Project, where the Audio WAV file would be used. OTOH, you could Atl-click on the Video portion of the muxed file, and Delete the Video, leaving only the Audio portion. Good luck, Hunt
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4139273#4139273
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4139273#4139273. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Are there longer music clips to use in iMovie you can find online? How to loop current audio?

    I have a video that almost 50 seconds long and I can't figure out how to make the clip I am currently using to loop without coming to a full stop in the middle of the video and then start over again about about 5 or 6 sec of silence. Are there websites I can find music clips to use in iMovie that are longer than the ones that come with the application on my iMac? Or how can I make the audio that I am already using loop continously until the end of the video?
    Thanks!

    If no one answers soon you could try over in the iMovie forum https://discussions.apple.com/community/ilife/imovie.

  • Problem merging clips automatically using audio waveforms

    I am new to Premiere Pro CC and am trying to use CC's new audio synch feature. I'm following the steps outlined in this video http://tv.adobe.com/watch/learn-premiere-pro-cc/merge-clips-automatically-using-audio-wave forms/. Even though production used a slate, and camera has audio reference, I am unable to synch, and keep getting this message: "Could not synchronize one or more clips in the current selection because a match could not be found." Any thoughts?

    It doesn't seem to work when you include a stand alone audio file.  I'd consider it a bug.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How to reveal from Project window where clip is used on timeline? CS4

    I've inherited a huge project. One of my tasks is to go through replacing all the audio (done as .mp3) and replace with .wav versions. In the project window's bins I have the .mp3 version sitting next to the .wav version.
    I'm sure I've seen a way that you can select a clip in the project window and get Premiere to show where on the timeline and in which sequence(s) this clip is used. I've searched the help and googled for the answer but can't find it! Have I been dreaming? Is there a way to show whereabouts in the project a clip is used? If there isn't, can anyone suggest a good workflow for me? I have about 150 .mp3s to replace with .wavs...
    Thanks
    Mark

    Mark,
    Great news! I thought that it had been added. I too inherited a major Project and could have used that 1000 times. Unfortunately, I am still on PrPro 2.0 (CS4 was not out then), so I had to do it pretty much manually. Fortunately, many of the Assets were in a semi-logical order, so it was not as tough as your case. Also, I was able to place the old edit into logical Sequences, so I was only working with 1 Timeline at a time, and not the original 8+ hour behemoth, that had been started. This limited my searches to maybe 100 Assets at a time.
    Glad that you found it, and now I can look forward to using it, when I upgrade.
    Hunt

  • I'm trying to crop individual frames. Can this be done without the crop being applied to the entire clip? Using imovie 11

    I'm trying to crop individual frames. Can this be done without the crop being applied to the entire clip? Using imovie 11

    use the cmd-B(lade) command to split your single clip into individual ones

  • FCP 5.1.4 no longer playing clips it used to play w/o rendering first

    G5 2.7 Dual GHz PPC, 4.5 GB SDRAM, OSX 10.4.11
    I haven’t used FCP 5.1.4 for quite a while. I digitized some home movie footage from miniDV directly into FCP 5.1.4. It plays back fine in the preview window. It plays fine if I open it up and play it from Quicktime v 7.6.4 (518.35). But when I put the FCP digitized clip in the timeline I get the red line indicating that it has to be rendered before I can see it play back in the canvas window. I tried to digitize new footage thru firewire directly into FCP with the same result – plays fine in the preview window and in QT. But it won’t play in the timeline / canvas window until I render it first. And the render file is twice the size of the original footage I digitized directly into FCP.
    Also, playback is getting stuck on footage that used to play fine. The audio keeps playing alright, but the video gets stuck, then catches up and plays a bit, then gets stuck again, sometimes never coming back. If I export the file as a QT movie, the QT movie plays with the video getting stuck – I don’t know if it’s in the same places. But it makes exporting a waste of time as an option to “work around” the problem.
    Did something change in FCP in the last year that I am not aware of? Like, maybe, FCP now upconverts / up-renders DV footage as HD footage as a default, or something like that? I used to just digitize 4:3 standard def footage into FCP, then drag it down into the time line, hit the space bar, and FCP would just play the files. Trim, delete sections, normal edits, and FCP would always play w/o rendering.
    I don’t want to upconvert any of my standard def 4:3 home movies. I just want to digitize the footage thru / via DV, make some straight cuts, adjust low volume, put in some chapter markers, and send the edited home movies to Compressor so I can make DVD’s out of my home movies. I’m not even putting in transitions and FCP says I have to render the entire file from beginning to end!
    I did add an iPhone to the scenario since I last used FCP. I noticed that the syncing that seems to go on constantly as a result of / related to the iPhone seems to reek havoc with FCP. So I shut auto-sync off. Now I have double everything in my iPhone again. But I’ll do whatever I have to in order to be able to use FCP to make DVD’s of all my old home movies.
    I stopped using this USB 2.0 drive. The last time I tried to digitize something it was on an internal hard drive – separate from my boot drive, and not a partition of my boot drive, a separate internal hard drive, which should be even faster than the firewire 400 hard drives I used to use.
    Please tell me if there is something I have to unselect to make FCP 5.1.4 just stay in Standard Def 4:3 so I can just edit my home movies without having to use 166% more hard drive space and wait for rendering on most everything I do.
    If my session is corrupt and I have to start all over in a new session, please let me know whether there is a way to export the chapter markers that I’ve already painstakingly inserted on the home movies I’ve already struggled through, so I don’t have to re-figure, re-locate, re-name, and recreate them again. Even a printout of the chapter marker location times and the names of the chapters in simple text format would be better than having to recreate each and every one of them from scratch all over again.
    Thank you.
    Options – that were already – selected in User Prefs:
    Sync audio capture to video source if present
    Warn when importing non-optimized media
    Auto-render
    Render: Open Sequences
    Render RT Segments
    Message was edited by: Tone Sanchez

    As far as I can tell, they are not different, except for:
    Aud Rate: 48001.8Hz on the older clip
    Aud Rate: 48001.9Hz on the new clip
    I cannot explain why the sample rates are not 48000 exactly. I didn't try to digitize them at the rates they digitized. The first, older clip came off of a miniDV tape via firewire from a JVC SR-VS30 miniDV / S-VHS deck. The second, new clip was digitized from the original BetaMax recording, in real time, through the same JVC SR-VS30 miniDV / S-VHS deck configuration, FCP set to DVDVCPRO50, the standard setting for DV that was the preset, that I have always used, using the miniDV deck as a "non-controllable device" source, recording into FCP in real time "Capture Now". Below are the Item Properties and the Sequence Settings:
    Item Properties for “GM reads letter pt 1” older clip – this file has been rendered:
    Creator: QuickTime Player
    Size: 3.9 GB
    Tracks 1V, 2A
    Vid Rate: 29.97
    Frame Size: 720 x 480
    Compressor: DV/DVCPRO – NTSC
    Data Rate: 3.6 MB/sec
    Pixel Aspect: NTSC – CCIR 601
    Field Dominance: Lower (Even)
    Alpha: None/Ignore
    Composite: Normal
    Audio: Stereo
    Aud Rate: 48001.8Hz
    Aud Format: 16-bit Integer
    Item Properties for “GM Pete Beg to end real time” new clip – this file has NOT been rendered:
    Creator: QuickTime Player
    Size: 16.6 GB
    Tracks 1V, 2A
    Vid Rate: 29.97
    Frame Size: 720 x 480
    Compressor: DV/DVCPRO – NTSC
    Data Rate: 3.6 MB/sec
    Pixel Aspect: NTSC – CCIR 601
    Field Dominance: Lower (Even)
    Alpha: None/Ignore
    Composite: Normal
    Audio: Stereo
    Aud Rate: 48001.9Hz
    Aud Format: 16-bit Integer
    Sequence Settings – General for GM reads letter pt 1 clip:
    720 x 480 NTSC DV (3:2)
    NTSC – CCIR 601 / DV (720 x 480)
    Lower (Even)
    Editing Timebase: 29.97
    Compressor DVCPRO50 – NTSC
    Quality: 100%
    Audio Settings: 48 kHz
    Depth: 16-bit
    Config: Default
    Sequence Settings – Video Processing for GM reads letter pt 1 clip:
    Render in 8-bit YUV
    Process Maximum White as: White
    Motion Filtering Quality: Normal
    Sequence Settings – Timeline Options for GM reads letter pt 1 clip:
    Starting TC: 01:00:00:00 Non-Drop Frame
    Track Display Selected:
    Show Keyframe Overlays
    Show Audio Waveforms
    Show Through Edits
    Show Duplicate Frames
    Video:
    Motion Bar
    Filters Bar
    Keyframe Editor
    Speed Indicators
    Audio:
    Filters Bar
    Keyframe Editor
    Speed Indicators
    Render & Playback:
    Filters
    Frame Blending For Speed
    Motion Blur
    Render:
    Frame Rate: 100%
    Resolution: 100%
    Audio Outputs: 2
    Downmix: 0
    Grouping: Stereo

  • How do I remove a the contents of a movie clip created using loadClip?

    I have a Flash site that loads specific SWFs into a movie
    clip called "content_mc" based on a button click. I do this using
    the "loadClip" method. I then remove (I thought) the SWF from the
    movie clip with "unloadClip" and replace it with a new SWF using
    "loadClip." All seemed to be working fine, but now I see that
    scripts from a SWF that I thought I unloaded are still running.
    I'm sure this is due to my lack of understanding of what
    "loadClip" and "unloadClip" are doing. And there certainly may be a
    better way to do what I want to do... but such is life. What is the
    method to delete a the contents of a movie completely from memory?
    or is there a better way to do what I want to do?
    Thanks for your help,
    David

    Nope you understand more or less correctly. unloadClip takes
    away the contents that loadClip placed. However there are certain
    things that don't go away.
    My guess is that you have some setIntervals. Those must be
    cleared (clearInterval) before you do the unloadClip.
    Or perhaps you have set up some listeners? Again those must
    be removed.

Maybe you are looking for