Clip properties not recognized

Made the leap to FCP-X. Getting "The video Properties of this clip are not recognized." on clips never edited or touched by FC Express. They are Quicktime MOV clips. It was to change settings to NTSC SD 720X480 29.97p. All of which confuses me. Any Suggestions?

After being pulled from a Sony DCR-SR220 HDD the files were converted to .mov via MPEG Streamclip.
QT won't open the file now "The document “kids christmas eve.mov” could not be opened. A required codec isn't available."
That may be the problem, despite other earlier conversions by Streamclip working and accepted by FC X.

Similar Messages

Fcpx: the video properties of this clip are not recognized.

The original footage is 300fps hi-speed video, shot with Casio Exilim EX-F1. Resolution 512x384, framerate 29.97
When I imported the footage into FCPX, I marked "Transcoding: Create optimized media". So I did.
Now I start a new project, drag the clip into the timeline and I get the message "The video properties of this clip are not recognized." andI can choose to import the clip as 640x480. But I don't want that, and why have I just transcoded into pro-res if FCPX itself cannot recognize the clip afterwards? What am I missing here?
For the record: I also bought Compressor4 and Motion5 so if they are needed for my solution, no problem. I tried importing the clip first into Compressor4 but couln't find a way to export into a FCPX-project.
Short note about myself: long time Premiere user, recently switched to Apple + FCPX.

I can't show you screenshots because I don't have access to FCP at the moment. Take the first clip you want to be in the project. Open it into the timeline using the Open in Timeline function. You can now blade this clip however you like. Cut the beginning, cut the end. Slice it however you want it. The audio will be separate from the video. You can collape it into a compound clip if you want. This only happens with the first clip. Leave the timeline open. In the event event browser, find the second shot you want. Mark In and Out points. Press the E key to append it to timeline. You want to insert a a different shot in the beginning. Move the playhead in the timeline back to the beginning. Find the shot you want in the browser. Mark in and out points. Press the W key to insert the shot. You want to add transitions. Select the clips in the timeline and press Cmd-T. You want to add a timeline. Put the playhead in the timeline wherever you want. Double click the title to put it into the timeline. Add more shots into the timeline. Do you see what's happening? You are editing your program into that first clip's timeline. The dimensions of that first clip remain intact in that timeline. When you export you're exporting that clip's timeline. As I said, it's not ideal, but it's a workaround. Basically FCP only works with standard video formats.

Clipping paths not recognized (in InDesign)

Some of my coworkers brought me some files that don't allow the clipping path to be selected in InDesign. These images are saved as PSD format, have a good path drawn and saved. When placed in InDesign, the option to use the clipping path or not is not even available, and the image is not clipped by default. If I place a file showing the import options, I can turn on the path, and it places on the page properly. But invoking the Clipping options in InDesign still shows Photoshop Path as unselectable, but it is checked as it is turned on.
Saving the path as simply a regular path, or as defined as a clipping path, in an EPS file gives me the correct options to use the path in InDesign. Simply resaving the PSD file to another file on my desktop does not fix it.
Is there any way to see what is going on in the file? Though it manifests itself as an InDesigns option problem, the error is inside of the Photoshop file. There is no way to resave the same image document and have it work properly.
The only way for me to "fix" the file is to make a new doc the same size, copy the image, paste into new document, copy path, paste into new doc, and save as a new name. Then the "started from scratch" file works properly.
Anyone have any suggestions?

@WasDYP: It's only a couple of files so it's not something I'd think anyone could recreate really easily.
Here are the files that are having this problem:
ftp://ftp.clippermag.com/PhotoshopFiles/DAV44462.psd
ftp://ftp.clippermag.com/PhotoshopFiles/DAV44463.psd
ftp://ftp.clippermag.com/PhotoshopFiles/DAV44464.psd

Java Beans properties not recognized

I'm trying to access a javabean property from jsp, but however this is what I get when I try to do so:
org.apache.jasper.JasperException: Cannot find any information on property 'PatientIcNo' in a bean of type 'Action.Profile'
my bean is Profile.java which is class in the package Action. I think i've compiled this successfully. But why am I still getting this error.
In my bean I've declared the getPatientIcNo() and setPatientIcNo() methods.
Thanks in advance.

But how did you declare patientIcNo?
private String patientIcNo;
or
private String PatientIcNo;
Believe it or not, it makes a difference.
Pay attention to the Java Bean Standard.
The JavaBean spec states that properties are case sensitive and start with a lower case character.
So in the JavaBean you should declare:
private String patientIcNo;
and the getter is:
public String getPatientIcNo() {
return patientIcNo;
In the JSP the syntax are:
<jsp:useBean id="patient" scope="request" class="Action.Profile" />
<jsp:setProperty name="patient" property="patientIcNo" value="RickyBobby" />
<jsp:getProperty name="patient" property="patientIcNo" />
<%= patient.getPatientIcNo() %>
<% patient.setPatientIcNo("Sidecar"); %>
If by chance you name the property PatientIcNo instead of patientIcNo,
<%= patient.getPatientIcNo() %>
and
<% patient.setPatientIcNo("Sidecar"); %>
work, but the others won't.
setPatientIcNo maps to the property patientIcNo.
But there isn't such a property in your bean!!
You named it PatientIcNo.

HttpsURLConnection is not recognizing the ssl.proxyHost properties

Hello All,
We have a requirement to do https post outside our network. I'm trying to tunnel through a proxy by setting system properties.
System.setProperty("ssl.proxyHost",myProxy );
System.setProperty("ssl.proxyPort",80 );
but some how weblogic.net.http.HttpsURLConnect is not recognizing the above settings and trying to post data directly.
we are currently on weblogic 8.1 sp1. Could some one please help me on this.
Thanks
pn

I also has this kind of problem setting a proxy :
1/- Try setting the properties in your start up script :
JAVA_OPTIONS="-Dssl.proxyHost=proxy -D....
2/- Try an upgrade to WLS8.1 SP3
Alexandre

Desperate...Premiere not recognizing any video

Hi everyone! I'm obviously very desperate if I'm posting to a forum for help.
The problem is my clips won't show in the timeline. When I drag and drop the video file, every single thing I've read online states that it should AUTOMATICALLY separate my video into clips for editing, and an audio track. It should read "Video 1", "Video 2," "Audio 1", etc. In the default setting, before a video is added to the timeline, it reads "Narration" and "Soundtrack." But, as I said, when I drag and drop a video it is supposed to automatically change. Even YouTube tutorials have shown this.
Well...mine doesn't.
When I drag and drop a video, not only does it NOT separate the video and audio, but it doesn't even separate it into clips. The words "Narration" and "Soundtrack" remain on the left side, where it's supposed to read "video" and "audio." So it's as if the program is not recognizing my video file.
Fine, so I tried another video file. One of those sample ones that were already on the computer. No dice, it still did the same thing.
So I'm at an impasse. No help sites or anything I've found have addressed the problem of the program just NOT WORKING like it's supposed to! And I know exactly what it's supposed to look like, because it's not that dissimilar from Windows Movie Maker which I have used before.
Any help would be greatly appreciated.

It's not from a camcorder, it's an .avi file directly from my hard drive. Saved on my desktop, no less.
Two things here:
AVI is but a wrapper, and so very much can be inside that wrapper. See this ARTICLE for some background, and also tips on how to peek inside that wrapper.
Second, I would not use the Desktop for your Assets. It is basically a special folder and one with special properties. Often, PrE (and many other programs) will have difficulty accessing the Desktop folder, due to those special properties. Just create a New Folder (or use the My Documents>My Video folder), and Move your AVI file(s) to that. This should be done, with PrE closed. When you Open that Project back up, PrE will ask you, "Where is file _____.avi?" From the Finder, just navigate to that New Folder, or to the My Videos folder, and choose that "missing" file.
This might also be a good point to talk a bit about what a Project file (PREL file) really is. This ARTICLE will give you some background. It will also explain why PrE asked "Where is file ____.avi?" once you Moved it.
Good luck, and for a very good starter set of articles, I strongly recommend Steve Grisetti's Basic Training Series at Muvipix. To go beyond those articles, he has some great books on PrE, also at Muvipix.
Good luck,
Hunt

IPod NOT recognized in iTunes...'Recognized' in My Computer...W7

Hello, just joined community, my name is Dominick, glad to be here.
So all of the sudden my iPod is NOT being recognized by iTunes. I have the most recent version of iTunes. I am running Windows 7 64-bit on my Lenovo Laptop. Long story/synopsis below...
It is being recognized in 'My Computer.' It is recognized as "Removable Disk." If I click on it, it then says "You need to format the disk in drive G [USB port its in] before you can use it". Then asks me if I want to Format Disk or Cancel. However, if I ask it to Format disk, it fails to do so every time. After failing, it then says...
"Windows can't Format G...Check to see that disk and drive are connected properly, make sure that the disk is not read-only, and then try again. For more information, search Help for read-only files and how to change them."
Can anyone provide some clarity on this statement? Can I change its properties to read-only and will that work?
Again, my iPod is NOT being recognized in iTunes, so I cannot restore it. I figured that would be my best solution at this point. When I run Diagnostics in iTunes and run the "Device Connectivity Tests", it tells me all 3 Support Services are working/green amd 2 of the 3 Ports are working/green...the only not working/red item is "No iPod...found", which of course just means itunes cant recognize my iPod when plugged in...back to square 1.
Also, I came across the Apple page dedicated to troubleshooting an iPod that is NOT recognized in iTunes, but is recognized in My Computer.
http://support.apple.com/kb/TS1363?viewlocale=en_US
However, after exhausting all options listed here, my iTunes is still not recognizing my iPod. I then tried uninstalling iTunes and all its component programs, e.g. Quicktime, Bonjour, Apple Device Services, etc. and reinstalling and this did not work. I then tried plugging in my iPod into a friend's computer with latest version of iTunes and that didn't work either.
To provide a little more background on how I got here, my iPod was acting funky over the past 2 weeks...meaning it would be slow to response, random songs would freeze/not play, and then start playing again, or freeze altogether, then I'de have to reset my iPod by pressing Menu and middle-button...I was planning on restoring it yesterday just to fix its minor issues that at the time were just annoying...but as fate would have it, here I am now...
When I plugged it into my laptop to Restore it yesterday morning, it took a LOOONG time for iTunes to recognize it, then iTunes told me the iPod was corrupt and I should Restore it...well, being an ignorant peion that I am, I instead disconnected it and tried Resetting it again to see what that would do...it then was totally frozen, wouldnt respond to pressing Menu and middle button to Reset iPod, and wouldnt get recognized by iTunes or My Computer when I plugged it in...once the battery died, I was able to charge it up, all the music and files were gone, and I had to select a language...I then plugged it into my Laptop to see what would happen, and per above, here I am now with iTunes no longer able to recognize iPod, but My Computer can, and everything else per above.
I've tried EVERYTHING I can find under the sun to fix / Restore my iPod / get iTunes to recognize it. Any last-ditch efforts from the Apple Community? Again, I already exhausted all options I can think of / find, including per link above...http://support.apple.com/kb/TS1363?viewlocale=en_US....my hope is mebbe someone else here can provide another option that will magically work or can decipher what my Computer is telling me per above when it fails to Format my iPod. Otherwise, this iPod is probably now FUBAR...
Hope that makes sense. Please lemme know any thougts or questions. you may have. Thank you for your time.
Dom

From the Classic iPod manual.
To reset iPod classic:
1 Toggle the Hold switch on and off (slide it to HOLD and then back again).
2 Press and hold the Menu and Center buttons for at least 6 seconds, until the
Apple logo appears.

USB Device Not Recognized on Windows 7 - USB mouse

I have a 4 week old Inspiron 1545 with Windows 7 Home premium that has developed an error: USB errors while trying to install a Microsoft USB mouse on this Laptop. Interestingly, my Microsoft USB Mouse installed perfectly first time and worked for about 2 weeks, and then failed. In looking at the system restore points, it tells me that there have been two driver updates to the USB environment since the unit was shipped from Dell. I wonder if an automatic update from Microsoft has somehow inadvertently updated or replaced a Dell factory driver.
Two nights ago I spent 45 minutes with Dell tech support doing remote control bug fixing on this laptop. They werent able to fix it (in the time allowed). They downloaded at least one of their newest drivers onto this machine and rebooted it - and they seemed pretty savvy - but still not working. So I went ahead a did a system restore to a point about 10 days back because I could see that a USB driver would be affected (as shown in the system restore menus), and I would like to compliment Microsoft on this very cool functionality!
At this point, I've unplugged the USB mouse , used the Device Manager to delete the 'unknown device', and done a system restore back to what I suspected was a working point. But still getting a 'Device not recognized' warning every few minutes, and still don't have a working mouse. I don't want to have to do system restores back to pprevious dates, although I suspect this is one solution.

Hello,
I just wanted to let u know, I had this same issue for about 2 weeks. Basically what happened was a bad install of my AMD Chipset drivers. When I attempted to upgrade, the install didn't go all the way through.
I then restarted my system, and BAM! No Mouse or Keyboard functionality thru USB.
Even when I went into SAFE MODE the Mouse and Keyboard were not functional. The only time they worked was when the computer first attempted to start, BEFORE windows loaded.
So, this means that your issue is a software problem.
I thought it was some other software that I installed, and ran a restore session, but that wasn't the issue. Still no functionality.
I even tried removing my CMOS battery, to reset it, since some people said that had solved their problems...Still nothing.
I then read other forums around the web using my Android phone to try and find a solution, only those solutions were no help.
I was also advised to run: MSCONFIG and Hide all Windows programs and then stop every other driver, source from loading (of course if my mouse and kb worked, I would have tried that).
I had even read that because I was using USB, that I should try using a PS/2 Mouse and Keyboard connection.
It took me 2 weeks to get the correct PS2 adapter that worked, which would essentially allow me access to my system again...
I Purchased a USB A Female to PS2 (MDIN6) Male Adapter (for Mouse) from http://www.SFCable.com
This my friends, was a lifesaver. I only have one PS2 port on my system, so I used my mouse to try every option I had previously read about. Of course you cannot type because the keyboard doesn't work, so you need to know the location of the folder where
the programs you are trying to run are.
So, a little after I got back into my system, and I closed down all programs, the warning screen came up that ALL of my USB Ports failed and could not be updated. I even Uninstalled every last USB port from the System Properties and restarted, and still
that didn't work.
I had forgotten that during the time when this problem arose, there was a failed install of my AMD chipset drivers, so luckily I had not deleted the source file and I tried to reinstall, and VIOLA! I'm back up and running and my USB ports are restored
and everything is working!
I hope this solution is able to help other people out there.
Thanks,
JE - [email protected]

My ipod not recognized by the computer or itunes?

Ok, the iPod works fine playing music and watching videos and everything else it is supposed to, and it charges fine. But when i plug it up my PC to sync new music, the screen on the iPod does like normal and goes to the gray and orangeish screen that says Connected, then immediately says Disconnecting iPod and shows the little progress bar as if you had ejected it. How can it do this on it's own before anything has recognized it?
I have done everything that the Support on here has said, the 5 r's and all that, and nothing. Checked device manager on my computer and it actually says that is is plugged up and recognized, but has a yellow exclamation point beside it. The properties of it says this error...
"Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)"
These errors occurred two days again until now, i have made no recent updates on my computer or iPod to have damaged anything but these problems randomly occur. it's really odd and if someone could help me it would be great.

Have you carefully worked through each and every suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

IPod not recognized in iTunes 7....continued, what I've done so far.

My iPod mini is not recognized in iTunes 7...but it recognized by Windows and this problem persists on all computers which makes me think it's the software on my iPod since it plays perfectly and charges up every time.
I have tried the following:
1. Resetting
2. Changing the Drive Letter from E to I
3. Deleting the Temp folder (as per an article's instructions) but some files would not delete.
4. Optimizing the drive with Norton Systemsworks
5. Changing USB ports
6. Removing and reinstalling iTunes.
I have read suggestions to do "Error-Checking" I found this by right clicking on the drive and clicking properties and then tools. There are two options here: "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors". What should I do? Why would I want to recover "bad sectors"?
Before this first started, I started up my computer when my iPod was plugged in and got this blue screen message:
Checking file system on E:
The type of the file system is FAT32.
The volume is dirty.
Volume Serial Number is 4360-F78C
Read failure with status 0xc000009c at offset 0x79c000 for 0x1000 bytes.
Read failure with status 0xc000009c at offset 0x79c000 for 0x1000 bytes.
Folder \iPod_Control\Music\F03 has bad clusters.
Bad clusters removed from folder.
Unrecoverable error in folder \iPod_Control\Music\F03.
Convert folder to file (Y/N)? Yes
Convert lost chains to files (Y/N)? Yes
507633664 bytes in 82 recovered files.
Windows is verifying free space...
Free space verification is complete.
Windows has made corrections to the file system.
4038922240 bytes total disk space.
335872 bytes in 29 hidden files.
24576 bytes in 6 folders.
2213265408 bytes in 519 files.
4096 bytes in bad sectors.
1825288192 bytes available on disk.

The solution was worked out on this thread:
http://discussions.apple.com/thread.jspa?threadID=941509&tstart=0

HT4623 After updating my software on my iPhone 4s; my phone is not recognized by iTunes and none of the support suggestions have worked. I am not satisfied with my apple support

After updating to the latest software, my iPhone 4s and iPad 2 are not recognized by iTunes. I have attempted all of the suggusted material on Apple support. I am not satisfied as these items are needed daily.

Connect the device to the computer.
Quit iTunes if it launches.
Click the Start menu, right-click on Computer, and choose Properties.
In the upper-left corner, click Device Manager. The Device Manager window should open.
Click the plus icon (or disclosure triangle () for Windows 7) next to Universal Serial Bus controllers to expand this selection.
Right click on apple mobile device USB Driver and update it to latest version.
This worked for me..

ZEN v Not Recogni

Hi, well my computer does not recognise my Zen v 2GB with the message "USB Device Not Recognized" when I plug it into a USB port.
I have the software installed that came with the CD and windows media player does not pick it up.
Under the device manager the MP3 player is listed as "Unknown Device" and I had tried updating it from there but with no luck.(Also when I right click on it and go to properties then click on "Driver details" it says "No driver files are required or have been loaded to this device" )
Now this has not always been the case. You see I upgraded my computer (New Motherboard, RAM and CPU) and I had to format it. I have all of the windows drivers installed also other MP3 player devices seem to work one of which is an IPOD and the other is an old mp3 player which both are picked up by windows. I had tried using different USB ports as well but that did not help. Also the mp3 player does switch on but it is on low battery. (And it won?t charge as the icon does not show).
If someone could help me with this I would appreciate it as I have a long train journey next week.

cmiller wrote:
thats the problem I called and waited on hold for 20 minutes so I hung up. Tried email support and then that brought me here. sorry but not too impressed.
Well, it IS the week after Christmas... Sure we could overhire 300%, but then we'd have to charge more for our products. Not exactly a win-win situation here.
Dale

IPod is not recognized in my computer

One day my iPod worked just fine on my PC, then the next day it stopped being recognized. My iPhone works just fine. I've tried different USB ports and different Apple cables. My iPod works on my GF's laptop. I tired every suggestion in Apple Support. I even restored my iPod using iTunes on the GF's computer. Still nothing. iTunes software is up to date; iPod software is up to date and it's fully charged.
Does anyone have any suggestions? Thanks much! mpp

Here's an update: I've reinstalled iTunes and my iPhone still works just fine. However, when I plugged in my iPod classic, Windows tried to install the device but failed.
I've tried following Windows help and support to get the device properly installed, but no luck. I used <run> hdwwiz to install a driver for the device, but it would not install. In device manager the iPod is showing up under network adapters as "Apple Mobile Device Ethernet". in the properties box, general it says "no drivers installed for this device" but under the driver tab driver details there are two drivers listed. When I click on the update driver button, it says the drivers are up to date.
For some reason my computer is not recognizing the iPod and will not install it properly.
Anyone have any suggestions? Cheers! mpp

Windows media player not recognized as a valid plug-in in safari?

on this PB 15 1.67/OS 10.4.3 I experienced some difficult in installing a piece of software, here's the thread....
http://discussions.apple.com/thread.jspa?messageID=1360929#1360929
prior to this difficulty, I had installed windows media player to access video clips embedded on news web sites etc, and everything worked fine, video usually streamed right into the media player, not saving a file to the desktop, but merely playing in a window....
to solve the software install problem above, I returned to the apple store & they suggested and helped me accomplish an archive & re-install of the OS, and afterwards, the problem software installed properly...
since the archive & re-install of OS 10.4.3, my windows media player is not recognized as a valid plug-in by safari.
when I click on a video link (embedded), a seperate window appears that describes my need to install windows media player 9 for mac (and it's already in my app's folder), when I download the file to attempt re-installing media player, stuffit doesn't seem to un zip the file after double clicking on it, no app file appears on the desktop to mount in the apps dierctory?
if the video link is not embedded, I can cntrl-click and save the file to the desktop and it will play normally, but if the file is embedded I have no means to see the news clip etc?
also, for those video files that are not embedded, instead of playing directly via streaming, when a link is clicked, the file downloads to the desktop before playing?
these aren't huge problems (well when trying to view an embedded news clip it is!) but any help in trying to return to normal behaviour would help!
thanks again,
dave
powerbook G4 1.67 Mac OS X (10.4.3)

thanks for the link, but I wa really looking into making the win media player function as it had before I had to archive & re-load OS 10.4.3
I use the player infrequently, but it drives me crazy when I'm looking @ a news page w/an embedded video and can't merely click it's link & see the clip!
any thoughts on why I can't get the win media player sitx file to un-stuff and possibly re-install win media player to allow safari to recognize it as a valid plug-in?
thanks again....
dave

Why wont my shuffle play? Also, my serial number is not recognized!

My shuffle can be connected to my computer fine, I can take songs on and off it. When I disconnect it, plug in my ear buds and hit play, the little green light comes on, but no music comes out. The light does not blink, it is just on. Even when I hit the play/Pause button again, the light stays on. (It always used to blink when it was paused). My ear buds work on other devices, so it is not them. When I tried to get help from apple, they told me they don't recognize my serial number, and yes, I gave them the right one, the one that is in my settings when I plug in the ipod and inscribed under the clip. I have already returned this once, I fear I may have to again, if I can.

Did you ever get an answer to your question? I have the same problem - the shuffle will not play and the serial number is not recognized on the apple website. iTunes recognizes the shuffle and shows the same serial number as what is on the box and under the clip. I have tried restoring the shuffle to factory settings but it still does not play. I tried registering the shuffle (using the model part number) and it says it is registered but it still does not recognize the serial number. I have no idea what to do.

Clip properties not recognized

Similar Messages

Maybe you are looking for