Clips not working in one event.

Hi,
I have one event that doesn't work properly. When I movie through the clips the video is fine but there is no audio coming out. When I try to drag a clip into the project it doesn't show at all and the preview window shows gray.
I did delete the com.apple.iMovie8 in the catches file and it fixed it for a while but today it happened again.
Any idea what should I do now?
Also all my other events work just fine.
I'm running the latest updated X OS and iMovie.
thank you,
Reeno.

update,
I moved one clip into a new event and now I can drag a clip into a project from both events the old one and the new one. The audio works in the project but still no video appears.
Any idea?

Similar Messages

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
It happened suddenly and seemed to get better after a day or two but then went completely after another day.
I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same. Any ideas

I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same. Any ideas

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Imessage is not working for one person

My imessage is not working for one person.
Its been like this for about 2 days
I have an iphone 5
imessage is on
both phones reset network settings,deleted and remade contact, etc.

Does the other person have iMessage on, too? Is the specific phone number/address you are trying to reach them at show up for them in Settings > Messages > Send & Receive?

HT1409 I have done this but it does not work with one of my albums and I dont know why??

I have done this but it does not work with one of my albums and I dont know why??

That would be it. Sometimes you can tweak the album & artist names enough for iTunes to download matching art from the store, or you could add a bonus track featuring 1 second of silence and attach artwork to that, or you could convert the files to Apple Lossless.
tt2

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

My ipad 4th gen touch screen is not working in one area

I had a screen replacement and now the Ipad 4th gen touch screen is not working in one area ( a strip across the middle). We tried 3 different touch screens with digitizer...any ideas?

Since Apple doesn't replace screens, they replace the iPad, I presume you had your screen replaced by an unauthorized service provider or perhaps you replaced it yourself. That voids the warranty and the ability to get assistance from Apple. If someone else replaced your screen take it back to them and demand the correct the problem.

Flash Player 9 not working on one computer

I have two computers. Flash Player 9 is not working on one
computer but OK on the other. It fails using both IE 7 and Firefox
2. It fails connecting to:
http://www.adidas.com/us/heritage/home.asp
and
http://imdb.com/title/tt0264262/trailers-screenplay-E15244-10-2
but seems to work OK to this site:
http://www.adobe.com/cfusion/showcase/index.cfmevent=casestudydetail&casestudyid=207779&lo c=en_us
. It's got to be some setting on the computer but I can't figure it
out for the life of me. Help - Please

Here is what I suspect is the problem:
The certificate for the Shockwave plug that is needed for the
Flash player to play the content is invalid when the browser checks
for it. Maybe this is because it was originally issued by
macromedia.com and it is now adobe.com. I don't know and no one
from Adobe has responded to my e-mail about the problem as of yet.
Very frustrating as visitors to our web site using IE who
haven't recently updated their players will part of the movie but
it will not play properly or display any of the text. This happened
sometime within the last several days as far as I can tell.

Imessage not working on one of the phones associated with my account although imessage is turned on

have imessage on but imessage not working on one of the iphones associated with my account

The following may help http://support.apple.com/kb/ts2755

Play back video clip is not working in the event browser...

Hello,
I have a problem in the event browser only. If I place the skimmer in any clip and press the space bar, nothing happen. If I press the "play" arrow" it does not work neither nor through the presentation menu.
The space bar shortcut to play works perfectly fine in the timeline, but not in the event browser.
In order to preview a clip at normal speed (100%), I have to drag it in the timeline and play it wich is rather anoying.
Any idea on how to correct this issue would be very much welcome.
Thank you very much for your help.

I was having this exact same problem. I tried deleting the preferences, however that didn't work. But, yes, when I switched the view from 'show viewers on second display', back to 'show on main display'... the spacebar worked again... then I switched back to showing the viewers on my second display, the original circumstance (which is definitely my preference)... and so far it is working again.. doesn't seem like anything has been 'fixed', but hopefully this doesn't happen often.
So thanks to this thread, as I had no idea what to do, and it was getting very annoying.

Button within a movie clip not working

Hiya,
I have a movie clip within my swf website that is basically
an icon that you roll over to produce the menu. The movie clip has
coding inside it to produce the rollover effect. This is as
follows:
stop();
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
this.onRollOver = function(){
rewind = false;
play();
this.onRollOut = function(){
rewind = true;
Whilst this coding works fine for this movie clip, for some
reason the buttons within the movie clip that appear as you
rollover them will not work when pressed. I am trying to get them
to navigate the main timeline, i.e. coding as follows:
on (release) {
_parent.gotoAndPlay("home")
_parent should be correct, I've tried it without and with
_parent._parent however still it has no effect. From what I can see
everything should be working fine.
Is there some reason why buttons will not work within this
sort of roll over effect movie clip?
Thanks for your help.

you can't assign mouse handlers to a parent movieclip and
expect a child movieclip to respond to mouse events: the parent
will intercept those events.
to remedy, either assign all your mouse handlers on the child
generation movieclips or use a hitTest() for one of the
generations.

Button w/in movie clip not working

I know this question has been raised before and it usually
just boils down to using the frame #'s and labels. But, even with
that it is not working.
I have a map of the US and when each state is rolled over I
would like a menu to appear - this menu is a list with several
options and all of the options are buttons. I have it set up so
that each state is its own MovieClip and each has an invisible
button over it for the hit area and the menu to appear. (i didn't
want it to be simply when it rolls over the state movie clip
because the hit would be square, covering other states and causing
a mess of pop up menus)
Anyway, the menu pops up fine, but the buttons within do not
work. Any ideas of what I'm doing wrong? Thanks Much!!!!
wi_mc.stop(); // wi_mc is the state movie clip
wi_btn.onRollOver = function(){ //wi_btn is the invisible
button
wi_mc.gotoAndStop(15); //frame 15 is where my menu resides
wi_btn.useHandCursor = false;
wi_mc.onRollOut = function(){
wi_mc.gotoAndStop(1);

Alright, I've made adjustments to how I've got it all set up.
I've made the menu it's own swf file, (seeing as how I'm going to
have 48 of them in total I figured it was less messy to have each
as their own file). Anyways... here's the current problem and I'm
hoping someone has a good explaination for why this would be
happening...
on my main file I have 2 invisible buttons - 1 is calling the
movie to load when rolled over and the other is calling the movie
to unload when a roll-out occurs. RollOver works great - fully
functional menu shows up. Roll out, however, is having some issues.
The invisible button is in the same location of the menu, same size
etc. so that when the user rolls away from this the menu should
"unload".
For some reason it's acting as if the hit area for the roll
out is off. I did a trace to find out where it's saying the rollout
areas are and the first is actually when I roll onto it, then only
again when i roll out from the left side of the graphic. I've tried
deleting the button and creating a new one but the same thing is
happening.
Any ideas for a very confused person trying to complete this
simple task of unloading a swf via rollout? MUCH appreciated!!!!
this.createEmptyMovieClip("ExternalSWFHolder",
this.getNextHighestDepth());
var SWFLoader:MovieClipLoader = new MovieClipLoader();
wi_btn.onRollOver = function(){
SWFLoader.loadClip("wi_menu.swf", ExternalSWFHolder);
wi_rollout.onRollOut = function (){
SWFLoader.unloadClip(ExternalSWFHolder);

Synchronize Clips not working anymore

This seemed to be working a few months ago, but no more.
Recently I have been forwarding the files to the editor because I haven't been able to get my own FCPX to work (they use FCP 7). I have this new project that rather important but I need to get this working right.
I'm wondering if the main track file — 3+ hours — is too large.
What I have is about 20 clips from two different camera sources and a "main track" provided by a Zoom H4n of a conference with several speakers. I select all of the HD clips and audio files in list view then select "Synchronize Clips" or use keyboard command. What that produces is a compound clip with all the clips stacked on top of each other with a start point beween 00:00:00:00 and 00:15:32:17 instead of using the audio track for sync. What the timeline should look like is for three levels with all of the clips in sequence along the main track. What I have is 27 levels with a similar start time.
I tried grabbing three clips with the main track and it almost worked with one of the clips preceding the clip it should have followed.
I looked around for answers but the suggestions of trashing the Preferences and reinstalling the application yielded the exact same results.
In July I had the same setup with a 1.5 hour main track and I got far superior results with a more difficult audio source.
Using FCP 10.0.0.5 and OS X 10.8.2 (12C60)

andynick,
Sorry that I took over a week to get back to you. I was doing some workarounds and tests amongst trying to get other projects completed. In any case, I'll be reporting this as a BUG to the overworked Apple developers. I came at this assumption from different angles and always got the similar result.
Your untested suggestion was a reasonable bases to test on even though it overlooks one important question:
If I can place all of the 27 files from two cameras and one audio track into the "New Multicam Clip" without modifying or breaking anything up in any way, why does it produce an "impeccable" Multicam Clip? One should be able to assume that the engine that produces the — properly synched — Multicam Clip is similar to the engine that is used when one wishes a compound clip from the "Synchronize Clips" command.
I think that rationale was sound, but, I tested your suggestion anyway to see if I could produce different results.
First I just tried to see if the "Synchronize Clips" command would work with something else as designed.
I added another camera to the mix and made short clips along with a 20 minute main audio track to synch to. I threw these 20 clips at the "Synchronize Clips" command and VIOLA, It produced a properly synched compound clip that displayed as four levels in the timeline. So, I was able to establish that it could work for some projects of significantly less duration.
I then cut the Main Track down to seven Half hour segments in Adobe Audition. Since I couldn't think of an elegant way to break up the three hour audio track into separate clips that would overlap by about 2.5 minutes. The FCPX workflow doesn't like to create separate files in the Timeline to place into the Events Browser as separate files — that could be synched (as far as I know).
I threw all of those files at the "Synchronize Clips" command. NFG. It stacked everything on top of each other with 7 levels for the audio tracks that should have been two levels. I noticed that I still had a 1.5 hour video clip from the B camera so I tried leaving that out of the synch matrix. This time it mostly failed, but with a slightly different result, the video still was stacked up in many levels instead of just two, but they were spread out a bit more along the first audio clip. A total failure for the video but, a different result. As for the audio, It had an incremental improvement; the second overlapped audio clip synched up at the correct spot on the first clip. However, the other five audio clips just arbitrarily assigned themselves along the first clip instead of stringing out into two levels. So there were one or two successes.
Three out of thirty-four ain't bad…
I was overly optimistic that the new upgrade to 10.0.6 might be an improvement over this BUG but it wasn't. I did some testing before the upgrade, and more testing after.
IT'S a BUG!!
Sorry Bro,
RAW

Clips not working in one event.

Similar Messages

Maybe you are looking for