Clonning Using RMAN

I am trying to clone 10g database from one windows machine to another windows machine. I am using RMAN for this purpose.
I have carried out following steps in order to do so ..
On machine - 1
1. Done alter system switch logfile thrice;
2. Shutdown Immediate
3. Startup mount
4. Then took full database backup using RMAN with controlfile autobackup on
5. On machine two I coped backup pieces to same location as that of machine 1
On machibe-2
1. Started database in nomount stage.
2. rman target /
3. restored controlfile from autobackup
4. alter database mount;
5. run{ restore database
Recover database;}
At the end of step 5 on machine-2 I am getting following error
Starting recover at 12-OCT-07
using channel ORA_DISK_1
starting media recovery
unable to find archive log
archive log thread=1 sequence=7
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 10/12/2007 11:03:27
RMAN-06054: media recovery requesting unknown log: thread 1 seq 7 lowscn 550503
RMAN>
I don't understand why RMAN is asking for online redo log when I have taken RMAN backup with database mounted.
Cant we take true cold backup using RMAN.. (true in the sense it should not ask for any recovery at the time of restoration)

Answers To FAQ For Restoring Or Duplicating Between Different Versions And Platforms Doc ID: Note:369644.1
How to make a copy of a database on the same Windows NT machine
Using a hot backup) Doc ID: Note:73301.1
How To Copy An Oracle Database To Another Machine
Using a cold backup) Note 174226.1
OERR: RMAN-6054 { Message text depends on version }
Doc ID: Note:48210.1
Have you used reset logs?
Adith

Similar Messages

Clonning using RMAN Cold Backup?

Hi,
I have a COLD RMAN backup in prod server and now i want to clone test db using this backup through RMAN. I have 2 question regarding this
1) Where do i need to place the prod RMAN COLD backup files in test server?
2) If i ran below command how RMAN will know where did i placed the backup in test server?
In Test Server
RMAN> duplicate target database to test;DB Version is : 10.2.0.4
Thanks in advance

thanks. Now it is unable to restore the datafiles from rman backup.Below steps i tried.
[oracle@Test test1]$ rman target /
Recovery Manager: Release 10.2.0.4.0 - Production on Tue Feb 21 08:58:46 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup nomount pfile='/u01/app/oracle/product/10.2.0/db_1/dbs/initprod2.ora';
Oracle instance started
Total System Global Area     603979776 bytes
Fixed Size                     1268896 bytes
Variable Size                163578720 bytes
Database Buffers             436207616 bytes
Redo Buffers                   2924544 bytes
RMAN> restore controlfile from '/u01/app/oracle/product/10.2.0/backup/test1/21_RMAN_BACKUP_08n3s02u_1_1.bak';
Starting restore at 21-FEB-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:05
output filename=/u01/app/oracle/product/10.2.0/oradata/test1/control01.ctl
output filename=/u01/app/oracle/product/10.2.0/oradata/test1/control02.ctl
output filename=/u01/app/oracle/product/10.2.0/oradata/test1/control03.ctl
Finished restore at 21-FEB-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> catalog start with '/u01/app/oracle/product/10.2.0/backup/test1';
Starting implicit crosscheck backup at 21-FEB-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 21-FEB-12
Starting implicit crosscheck copy at 21-FEB-12
using channel ORA_DISK_1
Finished implicit crosscheck copy at 21-FEB-12
searching for all files in the recovery area
cataloging files...
no files cataloged
searching for all files that match the pattern /u01/app/oracle/product/10.2.0/backup/test1
List of Files Unknown to the Database
=====================================
File Name: /u01/app/oracle/product/10.2.0/backup/test1/21_RMAN_BACKUP_07n3rvvq_1_1.bak
File Name: /u01/app/oracle/product/10.2.0/backup/test1/21_RMAN_BACKUP_08n3s02u_1_1.bak
Do you really want to catalog the above files (enter YES or NO)? yes
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /u01/app/oracle/product/10.2.0/backup/test1/21_RMAN_BACKUP_07n3rvvq_1_1.bak
File Name: /u01/app/oracle/product/10.2.0/backup/test1/21_RMAN_BACKUP_08n3s02u_1_1.bak
RMAN>
RMAN> restore database;
Starting restore at 21-FEB-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/app/oracle/oradata/prod2/system.dbf
restoring datafile 00002 to /u01/app/oracle/oradata/prod2/usr04.dbf
restoring datafile 00003 to /u01/app/oracle/oradata/prod2/undo.dbf
restoring datafile 00004 to /u01/app/oracle/oradata/prod2/sysaux.dbf
restoring datafile 00005 to /u01/app/oracle/oradata/prod2/p1_01.dbf
restoring datafile 00006 to /u01/app/oracle/oradata/prod2/p2_01.dbf
channel ORA_DISK_1: reading from backup piece /u01/app/oracle/product/10.2.0/backup/test1/21_RMAN_BACKUP_07n3rvvq_1_1.bak
ORA-19870: error reading backup piece /u01/app/oracle/product/10.2.0/backup/test1/21_RMAN_BACKUP_07n3rvvq_1_1.bak
ORA-19504: failed to create file "/u01/app/oracle/oradata/prod2/system.dbf"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
failover to previous backup
creating datafile fno=1 name=/u01/app/oracle/oradata/prod2/system.dbf
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/21/2012 09:01:09
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '/u01/app/oracle/oradata/prod2/system.dbf'

Ebs r12 cloning using rman online backup

dear all,
how are you guys? i have ebs r12 on multi node and i want to clone db tier and apps tier using rman online backup,can anybody provide me the detail steps of cloning ebs(db tier and appstier ) using rman online backup and directory structure on source and target database is also different.your help highly appreciated thanks in advance.
regards.

Hi,
You cannot use RMAN to clone the Apps tier of the EBS and you may use RMAN only on the DB tier. For a complete backup, as mentioned by Hemant K Chitale, you will have to use the rapid clone utility.
To perform a rapid clone using RMAN there are plenty of step by step instructions in google which may guide in addition to support.oracle.com, Let me google that for you
Thanks &
Best Regards,

Cloning using rman backups?

Is it possible to clone using RMAN backups?
How do we do it . Please tell me the steps of configuring.

Hi,
Let's take the example to create the auxiliary (clone) database using the rman backup in same server.
1)Building the auxiliary database directory structure
a) datafile, control file, redo file location
b) pfile,bdump,cdump,udump
2) Create the pfile from spfile (if required) and use it for auxiliary database with appropriate modification
3) Make all the necessary changes to your aux1 init.ora file
control_files=….
background_dump_dest=….
user_dump_dest=…
log_archive_dest_1=….
db_name=‘aux1’
instance_name=‘aux1’
remote_login_passwordfile=exclusive
4) Start aux1 instance in nomount mode
ORACLE_SID=aux1
export ORACLE_SID=aux1
sqlplus /nolog
sql>connect / as sysdba
sql> startup nomount pfile=/test/initaux1.ora
5)Configure the listener and tnsname.ora file for auxiliary database. Restart the listener.
lsnrctl>stop
lsnrctl>start
listener.ora entry
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = AUX1)
(ORACLE_HOME=/ORAHOME1/)
(SID_NAME = AUX1)
TNSNAMES.ORA ENTRY
AUX1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = xxx) (PORT = 1521)
(CONNECT_DATA =
(SID = AUX1)
(SERVER = DEDICATED)
6) Connect to the target and auxiliary instance and run the duplicate command
Rman>connect target /
Rman>connect auxilary sys/password@aux1
RMAN> connect target sys@prod
target database Password:
connected to target database: aaaa (DBID=4199802962)
RMAN> connect auxiliary sys@aux1
auxiliary database Password:
connected to auxiliary database: aux1 (not mounted)
RMAN> run
2> {
3> set newname for datafile 1 to 'C:\AUX1\SYSTEM01.DBF';
4> set newname for datafile 2 to 'C:\AUX1\UNDOTBS01.DBF';
5> set newname for datafile 3 to 'C:\AUX1\CWMLITE01.DBF';
6> set newname for datafile 4 to 'C:\AUX1\DRSYS01.DBF';
7> set newname for datafile 5 to 'C:\AUX1\EXAMPLE01.DBF';
8> set newname for datafile 6 to 'C:\AUX1\INDX01.DBF';
9> set newname for datafile 7 to 'C:\AUX1\TOOLS01.DBF';
10> set newname for datafile 8 to 'C:\AUX1\USERS01.DBF';
11> DUPLICATE TARGET DATABASE TO aux1
12> LOGFILE
13> GROUP 1 ('C:\aux1\redo01.log') size 100m reuse,
14> GROUP 2 ('C:\aux1\redo02.log') size 100m reuse;
15> }

How to refresh the database from target to clone system using RMAN ?

I created the database using RMAN from target (Node A) to clone (Node B)
I want to refresh the data what are all the changes happened in (Not complete database only chages) target to clone system using RMAN ? or any other way?

I want to refresh the data what are all the changes
happened in (Not complete database only chages)
target to clone system using RMAN ? or any other way?Incremental changes can't apply, once database is open using RMAN or any other B&R method.STREAMS can be use to capture and apply changes.
Cheer,
Virag

Clone database using RMAN

We are using Oracle 10g R2 on Linux.
We have a development database which is in non-archival mode. Can we clone this database without shutting it down using RMAN.

<off-topic>
Paul M. here below what I've seen from the "Overview" tab:
=================================================================================
@PaulM. replied (in response to Moazzam)
We have a development database which is in non-archival mode. Can we clone this database without shutting it down using RMAN. …
5 minutes ago
=================================================================================
I know you, that was impossible that you said this or asked such a question, but my heart missed a beat. I've had to open the discussion or "preview" your response to be sure about what you said.
We all have to take care about what we are quoting here.
</off-topic>
Nicolas.

Clonning from RAW file system to Coocked using RMAN ..Possible ?

One of our customer wants(For a project) to migrate their 9.2.0 database from one machine to another using a physical standby. Their current production machine uses RAW files for the Oracle datafiles. On the new machine (what will originally be the physical standby) they want to use filesystems (eg cooked files).
The process (very basically) will be :
1. backup production
2. restore production to new server
3. establish physical standby
4. switchover/failover to standby
5. Former standby is now production
The question is, assuming that the backups are being taken with RMAN, is it possible to restore the datafiles to cooked filesystems (given the original backups were taken from raw)? Are there any additional steps or gotchas we have to watch out for when doing this? Do you have any documentation which details how to clone a database in this way?
Regards
Manoj

he question is, assuming that the backups are being
taken with RMAN, is it possible to restore the
datafiles to cooked filesystems (given the original
backups were taken from raw)? Are there any
additional steps or gotchas we have to watch out for
when doing this? Do you have any documentation which
details how to clone a database in this way?Yes, it is possible. and infact this one advantage of using RMAN. RAW or cooked filesystems makes no difference to RMAN.
As far as I know , no additional steps are needed ( except common step to define new loaction).
Virag

Create standby DB using RMAN in Oracle10.2 standard ediction

I am tring to create a standby DB in different host with different directory using RMAN. when I issued the command <duplicate target database for standby>, RMAN gave the error msg as follow:
Starting restore at 02-MAY-06
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=78 devtype=DISK
creating datafile fno=1 name=/export/database/oracle/HTS1/system01.dbf
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/02/2006 11:24:28
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01180: can not create datafile 1
ORA-01110: data file 1: '/export/database/oracle/HTS1/system01.dbf'
Path '/export/database/oracle/HTS1' exists in the standby host and permission are granted, some initial parameter for standby DB was set to:
db_file_name_convert='/export/home/oracle/oradata/HTS1','/export/database/oracle/HTS1'
log_file_name_convert='/export/home/oracle/oradata/HTS1','/export/database/oracle/HTS1'
db_create_file_dest='/export/database/oracle/HTS1'
Can anyone shed some light on the cause of this error? Thanks
Jackson

I found the reason. it was because of the the backup set not available.
But after I prepare the backup set at hte primary host, rman still gave err msg:
RMAN> duplicate target database for standby;
Starting Duplicate Db at 02-MAY-06
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=78 devtype=DISK
contents of Memory Script:
restore clone standby controlfile;
sql clone 'alter database mount standby database';
executing Memory Script
Starting restore at 02-MAY-06
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /export/home/oracle/flash_recovery_area/HTS1/backupset/2006_05_02/o1_mf_ncnnf_TAG20060502T131953_25ftztpo_.bkp
ORA-19870: error reading backup piece /export/home/oracle/flash_recovery_area/HTS1/backupset/2006_05_02/o1_mf_ncnnf_TAG20060502T131953_25ftztpo_.bkp
ORA-19505: failed to identify file "/export/home/oracle/flash_recovery_area/HTS1/backupset/2006_05_02/o1_mf_ncnnf_TAG20060502T131953_25ftztpo_.bkp"
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
failover to previous backup

Unable to restore TABLESPACE using RMAN backups

Hi,
I am not able to restore tablespace using RMAN (TSPITR).
I have full backup of database,
While try to restore it's failed.
RMAN> recover tablespace TEST1 until logseq 706 auxiliary destination '/tmp';
Starting recover at 16-OCT-13
using channel ORA_DISK_1
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS2
Creating automatic instance, with SID='CsFz'
initialization parameters used for automatic instance:
db_name=TRAINEE
db_unique_name=CsFz_tspitr_TRAINEE
compatible=11.2.0.0.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=/tmp
log_archive_dest_1='location=/tmp'
#No auxiliary parameter file used
starting up automatic instance TRAINEE
Oracle instance started
Total System Global Area     292933632 bytes
Fixed Size                     1336092 bytes
Variable Size                100666596 bytes
Database Buffers             184549376 bytes
Redo Buffers                   6381568 bytes
Automatic instance created
List of tablespaces that have been dropped from the target database:
Tablespace TEST1
contents of Memory Script:
# set requested point in time
set until logseq 706 thread 1;
# restore the controlfile
restore clone controlfile;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log
sql 'alter system archive log current';
# avoid unnecessary autobackups for structural changes during TSPITR
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
executing Memory Script
executing command: SET until clause
Starting restore at 16-OCT-13
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=81 device type=DISK
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle/product/11.2.0/dbhome_1/dbs/c-332232391-20131016-09
channel ORA_AUX_DISK_1: piece handle=/oracle/product/11.2.0/dbhome_1/dbs/c-332232391-20131016-09 tag=TAG20131016T144951
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/tmp/TRAINEE/controlfile/o1_mf_95wbkpvj_.ctl
Finished restore at 16-OCT-13
sql statement: alter database mount clone database
sql statement: alter system archive log current
sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
contents of Memory Script:
# set requested point in time
set until logseq 706 thread 1;
# set destinations for recovery set and auxiliary set datafiles
set newname for clone datafile 1 to new;
set newname for clone datafile 7 to new;
set newname for clone datafile 2 to new;
set newname for clone tempfile 1 to new;
set newname for datafile 6 to
"/oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf";
# switch all tempfiles
switch clone tempfile all;
# restore the tablespaces in the recovery set and the auxiliary set
restore clone datafile 1, 7, 2, 6;
switch clone datafile all;
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /tmp/TRAINEE/datafile/o1_mf_temp_%u_.tmp in control file
Starting restore at 16-OCT-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /tmp/TRAINEE/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00007 to /tmp/TRAINEE/datafile/o1_mf_undotbs2_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00002 to /tmp/TRAINEE/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00006 to /oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf
channel ORA_AUX_DISK_1: reading from backup piece /tmp/1iomi9rv_1_1
channel ORA_AUX_DISK_1: piece handle=/tmp/1iomi9rv_1_1 tag=TAG20131016T144935
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:15
Finished restore at 16-OCT-13
datafile 1 switched to datafile copy
input datafile copy RECID=11 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_system_95wbkybb_.dbf
datafile 7 switched to datafile copy
input datafile copy RECID=12 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_undotbs2_95wbkycy_.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=13 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_sysaux_95wbkybz_.dbf
contents of Memory Script:
# set requested point in time
set until logseq 706 thread 1;
# online the datafiles restored or switched
sql clone "alter database datafile 1 online";
sql clone "alter database datafile 7 online";
sql clone "alter database datafile 2 online";
sql clone "alter database datafile 6 online";
# recover and open resetlogs
recover clone database tablespace "TEST1", "SYSTEM", "UNDOTBS2", "SYSAUX" delete archivelog;
alter clone database open resetlogs;
executing Memory Script
executing command: SET until clause
sql statement: alter database datafile 1 online
sql statement: alter database datafile 7 online
sql statement: alter database datafile 2 online
sql statement: alter database datafile 6 online
Starting recover at 16-OCT-13
using channel ORA_AUX_DISK_1
starting media recovery
archived log for thread 1 with sequence 702 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_702_807275402.dbf
archived log for thread 1 with sequence 703 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_703_807275402.dbf
archived log for thread 1 with sequence 704 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_704_807275402.dbf
archived log for thread 1 with sequence 705 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_705_807275402.dbf
archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_702_807275402.dbf thread=1 sequence=702
archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_703_807275402.dbf thread=1 sequence=703
archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_704_807275402.dbf thread=1 sequence=704
archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_705_807275402.dbf thread=1 sequence=705
media recovery complete, elapsed time: 00:00:01
Finished recover at 16-OCT-13
database opened
contents of Memory Script:
# make read only the tablespace that will be exported
sql clone 'alter tablespace TEST1 read only';
# create directory for datapump import
sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/tmp''";
# create directory for datapump export
sql clone "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/tmp''";
executing Memory Script
sql statement: alter tablespace TEST1 read only
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/tmp''
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/tmp''
Performing export of metadata...
   EXPDP> Starting "SYS"."TSPITR_EXP_CsFz":
   EXPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
   EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE
   EXPDP> Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
   EXPDP> Master table "SYS"."TSPITR_EXP_CsFz" successfully loaded/unloaded
   EXPDP> ******************************************************************************
   EXPDP> Dump file set for SYS.TSPITR_EXP_CsFz is:
   EXPDP>   /tmp/tspitr_CsFz_17454.dmp
   EXPDP> ******************************************************************************
   EXPDP> Datafiles required for transportable tablespace TEST1:
   EXPDP>   /tmp/TRAINEE/datafile/o1_mf_test1_95wbkyck_.dbf
   EXPDP> Job "SYS"."TSPITR_EXP_CsFz" successfully completed at 14:56:02
Export completed
contents of Memory Script:
# shutdown clone before import
shutdown clone immediate
executing Memory Script
database closed
database dismounted
Oracle instance shut down
Performing import of metadata...
   IMPDP> Master table "SYS"."TSPITR_IMP_CsFz" successfully loaded/unloaded
   IMPDP> Starting "SYS"."TSPITR_IMP_CsFz":
   IMPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Removing automatic instance
Automatic instance removed
auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_temp_95wblk08_.tmp deleted
auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_3_95wblj14_.log deleted
auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_2_95wblhn8_.log deleted
auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_1_95wblh8q_.log deleted
auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_sysaux_95wbkybz_.dbf deleted
auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_undotbs2_95wbkycy_.dbf deleted
auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_system_95wbkybb_.dbf deleted
auxiliary instance file /tmp/TRAINEE/controlfile/o1_mf_95wbkpvj_.ctl deleted
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 10/16/2013 14:56:16
RMAN-06963: Error received during import of metadata
RMAN-06961:    IMPDP> ORA-39123: Data Pump transportable tablespace job aborted
ORA-01565: error in identifying file '/oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3

Hi,
Cloud you please cheek below link:
ORACLE Cookies: TSPITR to recover a dropped tablespace
Thank you

Duplicate Oracle Database 8.1.7.0 using RMAN

An old database needs to be duplicated... :(
We have an old database named TAPES running on Windows 2003 (32bit) and Oracle 8.1.7.0
The team wants to duplicate / clone this database to another location. We have setup another server, with Windows 2003 and installed Oracle Software 8.1.7.0 with
starter database. The two machines A and B has no network connection (they are on different sites). Also the structure of the machines are different (the location of the database files are different)
How can I duplicate this using RMAN. We cannot afford any downtime on TAPES prod. The idea is:
-backup TAPES prod using RMAN (hot backup)
-copy and tranport the backup files to the remote machine B
-restore (and recover) the RMAN backup to Machine B
-the duplicate database has the same name
In oracle 9i, 10g and 11g, this is easy...and i must admit...i dont know how to do it in Oracle 8.1.7.0...
I need help... :(
thanks a lot!

thanks...i saw one article with this approach..but the document did not present the detailed process...do you have one? i am still searching for a good procedure to follow...since it is an old database and focusing/studying old versions like this is a pain in the a**... :(

Dataguard configured using RMAN not in sync with Primary

Hi All.
I have configured physical standby using RMAN it has errored out as below message since the Physical standby is came in Mount state and it is not in sync with Primary.
$ rman target sys/oracle1@PROD_st_STBY auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Jul 29 13:27:02 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD_ST (DBID=609107922)
connected to auxiliary database: PROD_ST (not mounted)
RMAN> duplicate target database for standby dorecover;
Starting Duplicate Db at 29-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=156 device type=DISK
contents of Memory Script:
set until scn 239665;
restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/07ngg1p6_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/07ngg1p6_1_1 tag=TAG20120719T140110
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/oracle1/oraerp/PROD_st/cont_.ctl
Finished restore at 29-JUL-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/29/2012 13:27:29
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/undotbs1.dbf conflicts with a file used by the target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/sysaux.dbf conflicts with a file used by the target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/system01.dbf conflicts with a file used by the target database
RMAN>
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
PROD_ST MOUNTED
SQL> select name,db_unique_name,database_role from v$database;
NAME DB_UNIQUE_NAME DATABASE_ROLE
PROD_ST PROD_st_STBY PHYSICAL STANDBY
SQL>
SQL> alter database recover managed standby database disconnect;
Database altered.
SQL>
SQL> alter system set log_archive_dest_state_2=enable;
System altered.
SQL> sho parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string LOCATION=/oracle1/oraerp/PROD_
st/arch/ VALID_FOR=(ALL_LOGFIL
ES,ALL_ROLES)
On Primary
==========
SQL> SELECT THREAD# "Thread",SEQUENCE# "Last Sequence Generated"
FROM V$ARCHIVED_LOG
WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)
ORDER BY 1; 2 3 4
Thread Last Sequence Generated
1 281
ON STANDBY
SQL> SELECT ARCH.THREAD# "Thread", ARCH.SEQUENCE# "Last Sequence Received", APPL.SEQUENCE# "Last Sequence Applied", (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
2 FROM
3 (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
4 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
5 WHERE
6 ARCH.THREAD# = APPL.THREAD#
ORDER BY 1; 7
no rows selected
SQL>
SQL> SELECT THREAD#, LOW_SEQUENCE#, HIGH_SEQUENCE# FROM V$ARCHIVE_GAP;
no rows selected
SQL>
Please suggest solution.
Best Regards,
Edited by: user13707876 on 19-Jul-2012 02:04

Hi,
It has worked now since error with warnings encountered as below:
$ rman target sys/oracle1@PROD_st_STBY auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Jul 29 15:57:39 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD_ST (DBID=609107922)
connected to auxiliary database: PROD_ST (not mounted)
RMAN> duplicate target database for standby nofilenamecheck;
Starting Duplicate Db at 29-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=156 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/0enggc17_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/0enggc17_1_1 tag=TAG20120719T165607
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/oracle1/oraerp/PROD_st/cont_.ctl
Finished restore at 29-JUL-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
contents of Memory Script:
set newname for tempfile 1 to
"/oracle1/oraerp/PROD_st/temp01.dbf";
switch clone tempfile all;
set newname for datafile 1 to
"/oracle1/oraerp/PROD_st/system01.dbf";
set newname for datafile 2 to
"/oracle1/oraerp/PROD_st/sysaux.dbf";
set newname for datafile 3 to
"/oracle1/oraerp/PROD_st/undotbs1.dbf";
set newname for datafile 4 to
"/oracle1/oraerp/PROD_st/users01.dbf";
restore
clone database
executing Memory Script
executing command: SET NEWNAME
renamed tempfile 1 to /oracle1/oraerp/PROD_st/temp01.dbf in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /oracle1/oraerp/PROD_st/system01.dbf
channel ORA_AUX_DISK_1: restoring datafile 00004 to /oracle1/oraerp/PROD_st/users01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/09nggc0j_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/09nggc0j_1_1 tag=TAG20120719T165547
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:03
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00002 to /oracle1/oraerp/PROD_st/sysaux.dbf
channel ORA_AUX_DISK_1: restoring datafile 00003 to /oracle1/oraerp/PROD_st/undotbs1.dbf
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/08nggc0j_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/08nggc0j_1_1 tag=TAG20120719T165547
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:03
Finished restore at 29-JUL-12
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 1 switched to datafile copy
input datafile copy RECID=1 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=2 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/sysaux.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=3 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/undotbs1.dbf
datafile 4 switched to datafile copy
input datafile copy RECID=4 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/users01.dbf
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle1/oraerp/PROD_st/redo.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 2 thread 1: '/oracle1/oraerp/PROD_st/redo_2.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 5 thread 0: '/oracle1/oraerp/PROD_st/log5.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 6 thread 0: '/oracle1/oraerp/PROD_st/log6.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
Finished Duplicate Db at 29-JUL-12
RMAN>
So please suggest can i rename them all redolog file.
Best Regards,

R12 clone with RMAN auxiliary db.

Hi all,
We require daily clone for our setup due to testing and other reason. Can we replace only database via RMAN Clone?
R12 clone with RMAN Auxiliary DB. Find below steps, if I am wrong correct me.
1.     run autoconfig on apps tier.
2.     perl <AD_TOP>/bin/admkappsutil.pl and Synchronize appsutil on db tier.
3.     Run autoconfig on dbtier or adconfig.sh <contextfile>) (which is correct? i am using autoconfig not with contextfile)
4.     adpreclone.pl dbTier
5.     adpreclone.pl appsTier
6.     copy source to target including db and apps tiers.
7.     perl adcfgclone.pl dbTechStack .
8.     create duplicate db (auxiliary db) from rman backup.
9.     sqlplus "/ as sysdba" @adupdlib.sql so
10.     perl adcfgclone.pl dbconfig <CONTEXT_NAME.xml> (This gives error, I am skipping this step. I have tried with perl adcfgclone.pl database but then also its give error. )
11.     exec FND_CONC_CLONE.SETUP_CLEAN;
12.     perl adcfgclone.pl dbTier (if we run perl adcfgclone.pl dbTechStack ,Is this step require?)
13.     perl adcfgclone.pl appsTier
please correct my steps.
thanks in advance,
sandeep

Hi,
3.     Run autoconfig on dbtier or adconfig.sh <contextfile>) (which is correct? i am using autoconfig not with contextfile)Run $ORACLE_HOME/appsutil/bin/adconfig.sh contextfile=$CONTEXT_FILE appspass=apps -- See (Note: 603104.1 - Troubleshooting RapidClone issues with Oracle Applications R12) for details.
10.     perl adcfgclone.pl dbconfig <CONTEXT_NAME.xml> (This gives error, I am skipping this step. I have tried with perl adcfgclone.pl database but then also its give error. )What is the error?
12.     perl adcfgclone.pl dbTier (if we run perl adcfgclone.pl dbTechStack ,Is this step require?)After running "perl adcfgclone.pl dbTechStack", you need to run "perl adcfgclone.pl dbconfig <Database target context file> -- See (Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone) and (Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12) for details.
Regards,
Hussein

Cloning using RMAN on two different OS

DB version:10gR2
Can i clone DB running on AIX 5.3 using RMAN and recreate it in a Solaris (5.9) machine?

I hope it is possible using transportable database concept for cross platfomr migrations.
It is simple and fastest procedure.
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_PlatformMigrationTDB.pdf
Anil Malkai

Backup procedure using RMAN for 11i Instance

Hi,
we have 11.5.10.2 instance
Node 1 = Application Tier ( 11.5.10.2)
Node 2 = DB Tier ( 9.2.0.7)
as of now, we are taking daily cold backup of both instances.
we want to implement RMAN online backup for DB and take cold backup every week end only.
so, what are the best procedures for implementing RMAN for 11i Database.
Please share your experience, if you have anybody implemented?
which one you prefer in RMAN backup ( backupsets or copy option or backupsets with compressed option) interms of performance.. our db size is 60 GB only.
we apply apps tier patches very rarely . so we want to take RMAN online backup for DB daily and take cold backup for entire apps and db in the week ends.

Hi,
This time, i am going to implement for Oracle 11i Database. thats why, i need you guys advice regarding 11i Database.Well, the same is applicable to 11i/R12 databases. You just need to configure RMAN the same way you configure it on any standalone database.
If you have implemented any where RMAN, can you share, how you are taking RMAN backup? I can share the scripts we use for backup using RMAN. If you are interested, let me know and I shall send it by email.
if we want to clone, are you cloning the TEST instance with RMAN backup or using cold backup.We use both, depends on the time frame of the cloning task and whether it is possible to use cold backup for cloning or not.
Please have a look at the following notes, it should be helpful.
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
Note: 760772.1 - Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=760772.1
Note: 362473.1 - Cloning E-Business Suite Using Hot Backup for Minimal Downtime of Source Environment
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362473.1
Regards,
Hussein

Cloning DB using RMAN Backup in a single system

Hi,
I want to clone my database using RMAN backup in the same system only. Please let me know the suitable document for that in both windows and linux.
Thanks in advance
Mahi

hi
find for both platforms linux and windows
http://www.dizwell.com/prod/node/9
http://www.pgts.com.au/pgtsj/pgtsj0211b.html
Regards
Vignesh Bala
Message was edited by:
Vignesh Bala

Clonning Using RMAN

Similar Messages

Maybe you are looking for