Close_Form('XXE_F501_SCRIPTING_START'); this is a command in IESCLPKG.PLL WHEN I AM USING THIS COMMAND MY SCRIPTING WINDOW IS GETTING CLOSED BUT THEN ONE ERROR IS COMMING ,KINDLY GIVE ME IDEA TO DEBUG THAT ERROR
Close_Form('XXE_F501_SCRIPTING_START'); this is a command in IESCLPKG.PLL WHEN I AM USING THIS COMMAND MY SCRIPTING WINDOW IS GETTING CLOSED BUT THEN ONE ERROR IS COMMING ,KINDLY GIVE ME IDEA TO DEBUG THAT ERROR
if (param_value = 'CLOSE_SCRIPTING_WINDOW') then
--go_block('VIEW_IB');
-- SET_WINDOW_PROPERTY('SCRIPTING_WINDOW', WINDOW_STATE, MINIMIZE);
--Set_Window_Property('SCRIPTING_WINDOW', VISIBLE, PROPERTY_OFF);
--hide_window('SCRIPTING_WINDOW');
-- GO_BLOCK('CTRL');
fnd_message.set_string('1');--nimish
fnd_message.show;--nimish
--Close_Form('XXE_F501_SCRIPTING_START'); -- Commented for Nova
fnd_message.set_string('2');--nimish
fnd_message.show;--nimish
Scripting_Util.EndScript;
end if;
THIS IS THE PLL CODE KINDLY GIVE ME A CLEAR SOLUTION.
First: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus
Similar Messages
-
When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin. After that error comes up my computer freezes and I have to force it to shut down. Does anyone know what that means and how I can fix it?
Means you have an incompatible Safari extension installed. Look in the /Home/Library/Safari/Extensions/ folder for the offending plug-in and delete it.
-
My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?
Is this an older "round" version of the AirPort Extreme? If yes, it is true that AirPort Utility 6.x no longer supports the older AirPort Extreme and AirPort Express models.
A model number......located on the bottom of the Extreme or on the side of the Express would be helpful to confirm what you have.
Apple probably does want you to buy a new AirPort Extreme.
The workaround might be to use a Mac or PC running a 5.x version of AirPort Utility.
A more complicated workaround would be to install AirPort Utility 5.6 on Mountain Lion. This is not supported by Apple......it does work for me.....but may not work for you. See this article for more details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
Error when trying to use this query in report region
Hi ,
I am getting "1 error has occurred
Query cannot be parsed within the Builder. If you believe your query is syntactically correct, check the ''generic columns'' checkbox below the region source to proceed without parsing. ORA-00933: SQL command not properly ended"
while trying to use this query in reports region .
Pls help.
Thanks ,
Madhuri
declare
x varchar2(32000);
begin
x := q'!select (first_name||' '|| last_name)a ,
count(distinct(session_id)),manager_name
from cappap_log,
MIS_CDR_HR_EMPLOYEES_MV
where DECODE(instr(upper(userid),'@ORACLE.COM',1),0,upper(userid)||'@ORACLE.COM',upper(userid)) = upper(email_address)!';
if :P1_ALL = 'N' then
x:= x||q'!and initcap(first_name ||' '|| last_name)=:P1_USERNAME!';
else
x:= x||q'!and initcap(first_name ||' '|| last_name)like '%'|| :P1_USERNAME||'%'!';
end if;
if :P1_APP_NAME = '%' then
x:= x||q'! and flow_id like '%'!';
else
x:= x||'flow_id = :P1_APP_NAME';
end if;
x:= x||q'! group by first_name||' '|| last_name , manager_name!';
return x;
end;Hi, I am actually stuck here. Can you please let me know which among these is the higher version.
1) Final Release 3.50
Version 3500.3.016
2) Final Release 3.50
Version (Revision 481)
Because it is working fine in the 1st one whereas its throwing that error pop-up in 2nd one(as soon as we select the Change query global definition option) . -
I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!
Welcome to the Apple Support Communities
When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html -
Hello,
When trying to run CS5 (64 bit) on Windows 7 get error failed to initlialize COOLTYPE ?
Any ideas ?
I tried re-installing CS5 Master collection but that failed as well.
Running out of ideas
RichardI have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes. I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.' I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly. What a joke.
-
Hi ! i have this new itunes account but when i wanna use this for apps he ask me for a card number but i don't have one .what i supposed to do ?
Hi Mada7ina,
If you are looking to set up an iTunes Store account without an associated credit card, you may find the following article helpful:
Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
Regards,
- Brenden -
When trying to sign in to the iTunes store I get the following message, "We could not complete your iTunes Store request. An unknown error occurred (5002). There was an error in the iTunes store. Please try again later." How do you resolve this? Has been going on for days now.
I started getting this message a couple of days ago.
Started a thread of my own before I saw your post. https://discussions.apple.com/thread/4660828 -
gets close but then a screen pops up saying ' Service apple mobile device failed to start. Verify that you have sufficient privilages to start systme services'. Please HELP!!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
New user here. Trying to import iPhoto 9.4.2 libraries into Aperture 3.4.3 as referenced files. When accessing File>Import>Library, it finds the iPhoto library just fine, but then imports it as Master files. No option that I can find to leave the photos in place on the file system. All the literature says their should be an option to choose, but I never get that option. What?
All the literature says their should be an option to choose, but I never get that option.
That has been true for the previous Aperture versions. Now Aperture simply treats the original image files exactly as they are in the imported library. Referenced images will stay referenced, managed will be imported as managed. But you can always relocate the imported managed images afterwards by using "File > Relocate".
Regards
Léonie -
I rented a movie from itunes(The Untouchables), and it won't play. It lets me click on it but then is just black and won't play. I saw that I was billed for it. What should I do?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
Why, when I try to install the latest iTunes update, itsays that I have an "invalid" signature...I have used this same machine and have installed all the previous updates with no problem.
That one suggests the installer has gotten damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
If so, how do I delete the Web tab? Or is that just normal for when I'm using photo stream on my iphone? Thanks in advance!
I just fired up iPhoto and I've the same Web>PhotoStream tab - and I don't even own an iOS device. But I do have PhotoStream active under iCloud and see a dozen or so pics that I've added in the last couple of months.
Go to System Preferences>iCloud>PhotoStream and click on the 'options' button - you should be able to see the option to share or not to share. This may be a more appropriate question for the iPhoto or iPhone forums, though... unless someone else comes along that does have an iOS device.
Good luck,
Clinton -
I unplugged my iPod Classic without ejecting it first. It played for many hours(about 8) after that but then suddenly stopped working and it has a blackend screen that seems to say paused. Wondering if there is a way to get it to work again.
Hey hughborg25,
I found an article that can help you troubleshoot when an iPod becomes unresponsive or the screen goes black:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
I would go through all the steps listed there, and the issue should be resolved by the end.
Live long and prosper,
David
Maybe you are looking for
-
DB connection not working in compiled programme
Hi all, I have a calibration vi working fine in the development mode and run. Yet when i build an exe for it, the exe fails with the following message? any ideas? Error -2146824584 occurred at Conn Get Properties.vi->DB Tools Create Parameterized Que
-
When exporting projects in AP2.....
what does "consolidate images into exported projects" mean? Is it best to leave the box unchecked or to check it? Does it make any difference when importing these projects back into AP2 or AP3 if they are or are not consolidated?
-
How can i stop getting pinwheels when i add music?
Mac OSX v. 10.6.7, 1.83 GHz Intel Core Duo, usb 2TB WD external HD ever since my last update for itunes, whenever i add music, it is taking 10x longer to add the files and i get pinwheels for over a minute. for example, i added a 9 track album and i
-
Remove Address Bar and Menu Bar frm WebHelp
Hi, I'm working with the latest RoboHelp (actually TCS) with all the updates. My project is now in WebHelp and want to display the Help part only. I don't want the Address Bar, Menu Bar displayed in the browsers, and the ability to create tabs. Just
-
"Final Cut Pro quit unexpectedly" when I try to "share" my project.
I can't export my project. Every time when I try, the FCPX close and show "Final Cut Pro quit unexpectedly".