Closing reminders notifications on ipad closes them on my laptop - very bad!

When I'm using my iPad, a reminder notification pops up, making me respond before continuing. But if I close it, it also closes the reminder notification on my laptop. It took me months to figure this out, as I'd often be away from home when using my iPad. Today, I finally was using my iPad and laptop at the same time and saw it happen twice in ten seconds. Close on the iPad --> notification disappears on the laptop. Close it on the iPad --> notification disappears on the laptop. I couldn't understand why dozens of reminder notifications were disappearing. Now it's perfectly clear.
Is there any way to disconnect this function so that I can close on my iPad (I see no quick way to snooze them) without closing them (essentially erasing the notification alert) on my computer? Reminders is the only way I can manage a schedule that would crush many people.
Thanks ahead of time!

Maybe go into the iCloud settings for your iPad and disable reminders? then it shouldn't update them

Similar Messages

  • After updating mini ipad to ios7 the sounds are very bad. Kind of distortion. Any idea?

    After updating mini ipad to ios7 the sounds are very bad. Kind of distortion. Any idea?

    Found it myself.
    Restore settings + restart device fixes the problem.

  • My Ipad mini keeps going through various applications all by itself and won't allow me to close them

    My Ipad keeps going through my contacts, e-mail, ITunes, types by itself and will go through these apps over and over again. I can close them while in the process but just as I close them with the home button it starts right up again. I have tried closing all the open apps by double clicking the home button, which it will show the screen of all the apps but when I try to hold them down to delete them it doesn't respond. I have tried hard reset twice by holding the home button and the top button until the apple logo appears but this hasn't worked.
    Diver

    Hi Diver,
    I haven't ever seen this happen, but if quitting apps and hard resets don't do it you might want to start clean. Are you able to run a backup of your iPad mini? If I was in your shoes, I would back up the iPad, erase the iPad and then restore the data to see if that fixes it.
    Step 1 would be to back up the data (see http://support.apple.com/kb/ht1766).
    Step 2 would be to restore the iPad to factory settings (see http://support.apple.com/kb/HT1414).
    Step 3 would be to restore the backup (see http://support.apple.com/kb/ht1766).
    Hope this helps!!
    ~Joe

  • How to restore the contacts from iPad 2 to iPhone 5? I lost some of my contacts after deleting a closed email account; however I have them all in my iPad!

    How to restore the contacts from iPad 2 to iPhone 5? I lost some of my contacts after deleting a closed email account; however I have them all in my iPad!

    Do you see those in www.icloud.com? Yes- sign in to icloud on the phone.
    No- how did you get those to the ipad?

  • I'm new to iPad. I've installed some apps. The apps are "open" even when I go to something else or close that page. I just did some updates on other apps and see those apps are still "open". How do I close them?  I'm sure it's draining my battery. Help!

    I'm new to iPad. I've installed some apps. The apps are "open" even when I go to that page and go off it. How do I close them?  I'm sure they are draining my battery. Can someone explain what I'm doing or not doing correctly?  Thanks

    1blindmouse wrote:
    I'm new to iPad. I've installed some apps. The apps are "open" even when I go to that page and go off it. How do I close them?  I'm sure they are draining my battery. Can someone explain what I'm doing or not doing correctly?  Thanks
    If you are referring to the fact that, in the App Store app, after you have installed or updated an App, that the Install button changes to now read "Open" then this does not mean that the App is Open and running. It means, rather, that, if you touch the button now marked "Open", the App will be started and "Open". It's just a quick way to get to the App you have just installed or updated.

  • Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them

    HI
    i am keep seeing this message in ulsviewer of splogs in a webfront end server
    Detected use of SPRequest for previously closed SPWeb object.  Please close SPWeb objects when you are done with all objects obtained from them, but not before.  Stack trace:  
    at Microsoft.SharePoint.SPWeb.get_Exists()   
    at Microsoft.SharePoint.WebControls.CssLink.OnLoad(EventArgs e)   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.ProcessRequest()   
    at System.Web.UI.Page.ProcessRequest(HttpContext context)   
    at ASP._layouts_icc_icc_scan_view_aspx.ProcessRequest(HttpContext context)   
    at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)   
    at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)   
    at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)   
    at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)   
    at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   
    at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   
    at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   
    at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
    adil

    Hi,
    Your SPweb object is not disposed properly.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3a25eb86-8415-4053-b319-9dd84a1fd71f/detected-use-of-sprequest-for-previously-closed-spweb-object-please-close-spweb-objects-when-you?forum=sharepointdevelopmentprevious
    http://sharepoint.stackexchange.com/questions/50793/detected-use-of-sprequest-for-previously-closed-spweb-object-after-spquery
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Reminders Notifications in Mountain Lion latest update keeps freezing on my homescreen and won't go away when trying to close. Please help.

    Reminders Notifications in Mountain Lion latest update keeps freezing on my homescreen and won't go away when trying to close. Please help.
    I'm using a 2009 Macbook Pro and have installed the lastest update 10.8.1

    I've been seeing this for some time now and getting quite sick of it. It happens when I've been away at work for the day and come home to find frozen notifications.
    You can fix this temporarily by quitting Notification Centre from Activity Monitor but it keeps happening to me every week or so.

  • I closed apps following the "swipe up" method and it appeared all were closed. However, when I checked in "Apps" it indicated 13 more apps were still open. How do I close them?

    I closed apps following the "swipe up" method and it appeared all were closed. However, when I checked in "Apps" it indicated 13 more apps were still open. How do I close them?

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before.

    I have develop a custom solution for SharePoint Foundation 2010 that provide PDF documents filled with lists data and attachemnts.
    If the Customer run the solution to get the PDF we found in the ULS log following entry:
    03/07/2014 12:07:20.69  w3wp.exe (0x0B10) 0x18EC 
    SharePoint Foundation General                        90hv Unexpected 
    Detected use of SPRequest for previously closed SPWeb object.  Please close SPWeb objects when you are done with all objects obtained from them, but not before.  Stack trace:    at Microsoft.SharePoint.Utilities.SPUtility.GetLocalizedString(String
    source, String defaultResourceFile, UInt32 language)     at Microsoft.SharePoint.SPFieldCollection.get_DisplayNameDict()     at Microsoft.SharePoint.SPFieldCollection.GetFieldByDisplayName(String strDisplayName, Boolean
    bThrowException)     at Microsoft.SharePoint.SPFieldCollection.GetField(String strName, Boolean bThrowException)     at Microsoft.SharePoint.SPListItem.GetValue(String strName, Boolean bThrowException)    
    at Microsoft.SharePoint.SPListItem.get_Item(String fieldName)    
    at ECM_PDF_Excel.ListClicked.GetECOs(Dictionary`2 searchedEC... e918ecd4-7ed6-44bb-9e4f-d764586a2f79 ...RECONumber)    
    at ECM_PDF_Excel.PDF.Create()     at ECM_PDF_Excel.Layouts.ECM_PDF_Excel.ECMPDFExcel.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
    context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
    managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 f... e918ecd4-7ed6-44bb-9e4f-d764586a2f79
    03/07/2014 12:07:20.69* w3wp.exe (0x0B10)                        0x18EC SharePoint Foundation        
     General                        90hv Unexpected ...lags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
    managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
    flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   e918ecd4-7ed6-44bb-9e4f-d764586a2f79
    We check the method
            /// <summary>
            /// Returns the ECOs in a Dictionary: ECO Number, Suffix
            /// </summary>
            /// <param name="searchedECRECONumber">Dictionary, with the search ECR/ECO Number</param>
            /// <returns>Dictionary ECO Number, Suffix</returns>
            public static Dictionary<string, string> GetECOs(Dictionary<String, String> searchedECRECONumber)
                SPSite siteContx = SPContext.Current.Site;
                SPWeb webContx = siteContx.RootWeb;
                Dictionary<string, string> listECOs = new Dictionary<string, string>();
                string ecoNumber = string.Empty;
                string ecoSuffix = string.Empty;
                if (searchedECRECONumber.ContainsKey(ConstantData.listClickedECONumberDictionary))
                    ecoNumber = searchedECRECONumber[ConstantData.listClickedECONumberDictionary];
                else
                    return listECOs;
                // Ich suche die ECO Nummber bei gegebener ECR Nummer
                // Ich brauche den Listen Namen der in den Spalten Realtion ECR Number & Realtion ECO Number einen Wert hat
                SPList dataList = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists);
                if (dataList != null)
                    SPListItemCollection dataListItems = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists).Items;
                    foreach (SPItem dataListItem in dataListItems)
                        Object relationECRColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECRNumber];
                        Object relationECOColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
                        if (relationECRColumnName != null && relationECOColumnName != null)
                            // Ich habe den Listennamen gefunden in dem Spalten Realtion ECR Number & Realtion ECO Number einen Wert haben
                            string searchedListName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_Title];
                            string searchedECOSuffixColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
                            // Get the List from variable listName
                            listECOs = GetECOsDictionary(searchedListName, searchedECOSuffixColumnName, ecoNumber, relationECOColumnName);
                return listECOs;
    - What take we wrong?
    - How can we avoid this message?
    Regards
    Jonnyenglisch
    Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes

    Here the code of GetECOsDictionary:
             /// <summary>
            /// Fill the dicionary with related ECO Numbers/Suffix
            /// </summary>
            /// <param name="searchedListName">String: the name of the list</param>
            /// <param name="ecoNumber">String: the ECO Number</param>
            /// <param name="relationECOColumnName"></param>
            /// <returns>Dictionary</returns>
            private static Dictionary<string, string> GetECOsDictionary(string searchedListName, string ecoNumber, Object relationECOColumnName)
                SPSite siteContx = SPContext.Current.Site;
                SPWeb webContx = siteContx.RootWeb;
                Dictionary<string, string> listECOs = new Dictionary<string, string>();
                SPQuery oQuery = new SPQuery();
                oQuery.Query = "<OrderBy>" +
                                    "<FieldRef Name='" + "Title" + "' Ascending='TRUE'></FieldRef>"
    +
                                "</OrderBy>" +
                                "<Where><BeginsWith>" +
                                    "<FieldRef Name='" + "Title" + "'/>" +
                                    "<Value Type='Text'>" + ecoNumber + "</Value>" +
                                "</BeginsWith></Where>";
                SPListItemCollection searchedListItems = webContx.Lists.TryGetList(searchedListName).GetItems(oQuery);
                foreach (SPItem searchedListItem in searchedListItems)
                    // Wenn die geclickte ECO Nummer gleich der Listen ECO Nummer ist dann setze die gefundene ECO Nummer
                    string foundECONumber = (String)searchedListItem[relationECOColumnName.ToString()];
                    string[] splitECONumber = foundECONumber.Split(ConstantData.splitBy_Slash);
                    if (ecoNumber == splitECONumber[0])
                        ecoNumber = splitECONumber[0];
                        if (splitECONumber.Count() == 1)
                            listECOs.Add(foundECONumber, "0");
                        if (splitECONumber.Count() > 1)
                            listECOs.Add(foundECONumber, splitECONumber[1]);
                return listECOs;
    Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes

  • Since upgrading to ios 8 from ios 7 on my ipad i keep getting the annoying certificatepop ups. Is there anyway to eliminate them? Its more of an inconvinience to keep having to close them.

    Since upgrading to ios 8 from ios 7 on my ipad i keep getting the annoying certificatepop ups. Is there anyway to eliminate them? Its more of an inconvinience to keep having to close them.

    Check to make sure that the year, date, and time are set correctly on your iPad.

  • We have 2 iPad 2's. For one of them it must be very close to the router to pick up a wifi signal. We have restarted and reset it without success. Help!

    We have 2 iPad 2's. For one of them it must be very close to the router to pick up a wifi signal. We have restarted and reset it without success. Using 7.1.1.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How to Change Your iPhone’s (iPad’s) DNS Servers
    http://www.macinstruct.com/node/558
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I updated my iPad to ios 7.1, and now I can't double click on the home button to switch between apps, or to close them. What happened? How can I fix this?

    I can't double click on the home button to switch between apps, or to close them. This happened after I updated to ios 7.1

    Swiping up from the bottom of the screen with four fingers did not bring up the app preview. A single press on the home button still brings me back to the home screen, but a double press of the home button does nothing following updating to 7.1   Given that, when I added a software home button as suggested by DIAVONEX, I found that all of the apps WERE still open! So thank you DIAVONEX, and you should be careful, bobseufert, as your information was inaccurate.( I did try turning it off and that didn't change anything. ) I don't really want a software home button on my screen, but I guess I will use it until either there is another update to resolve this glitch or someone else identifies a quirky setting that I inadvertently activated...

  • My iPad closes apps frequently after last update to iOS 5

    I have an iPad 2 and before I've done the update to get iOS 5 it hasn't happened. I think it is a problem with the new system.
    My sister says the same thing happens with her iPad too.
    Does anyone knows how to fix this?

    You could try closing all apps completely and then do a reset and see if that helps. To close all apps : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    To reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I was closing settings and my ipad froze...

    I was closing settings and my iPad just froze... All i see is my settings half closed! I hear notifications but dont see them, i cant control my volume I cant turn it off. The battery goes down and time passes but its frozen?!? I can talk to siri, i asked if she could open safari but she said she cant... she cant face time or message either... im scared!! Im waiting till the battery dies then I turn it back on, but im not sure if this is right...
    iPad 4 IOS 7.3 or 7.4
    really miss my iPad!

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • TS3274 I have multiple safari windows open, how do I close them 1 at a time?

    Does anyone no how to accomplish closing safarie window 1 at a time or even all at once?

    If you have iOS 5+ with the tabbed browsing then you can close the 'active' tab by tapping the 'x' on the left of the tab (you can't close the last tab).
    If you have iOS 4 or below then tap the icon of the two squares to open the thumbnail/page view and you can close them from there

Maybe you are looking for