Multiple Models & Conditional Display in Dynamic Table.
Hi
There are 5 models pointing to different systems. The user will randomly select the system and accordingly the models will get executed.
My issue is in the second screen I need to populate a table which should display the data from multiple models at the same time.. I need to loop trough the models and check, the search term entered by the user, in which all system the same is present and accordingly I need to display in table...
Please help me by placing some sample code for looping in multiple output nodes and create table dynamically and display the data in the coloumn...Coloumn numbers are fixed.....
Regards
SU
Hi
I suggest to create a value node to show the results in a view.
and loop at all the model nodes and when match found create an new element for the table and add it to the table node.
This is the code to Create Table and its columns dynamically.
place the code in wdDoModifyView()
IWDTable <tableref> = (IWDTable) view.createElement(IWDTable.class,"<tablename>");
<tableref>.bindDataSource(wdContext.node<node>().getNodeInfo());
IWDTableColumn <colref> =(IWDTableColumn)view.createElement(IWDTableColumn.class,"F");
IWDInputField inf = (IWDInputField )view.createElement(IWDInputField.class,"d");
inf.bindValue(wdContext.node<node>().getNodeInfo().getAttribute("<attribute>"));
<colref>.setTableCellEditor(inf);
<tableref>.addGroupedColumn(<colref>);
IWDTransparentContainer <grp> =(IWDTransparentContainer)view.getElement("RootUIElementContainer");
<grp>.addChild(<tableref>);
Regards
Abhimanyu L
Similar Messages
-
How to give color of particular cell in alv list display for dynamic table
Dear Experts,
i want to give color of a particular cell in alv list display (reuse_alv_list_display). Here i am passing data through dynamic table?Hi,
Se this:
DATA: lt_color TYPE lvc_t_scol WITH HEADER LINE.
DATA: BEGIN OF data_tab OCCURS 0.
tabcolor TYPE lvc_t_scol,
END OF data_tab.
* Befone ALV call
alv_layout-coltab_fieldname = 'TABCOLOR'.
* For each row in data_tab
REFRESH: lt_color.
CLEAR: lt_color.
lt_color-color-col = 6.
lt_color-color-int = 1.
lt_color-fname = FIELD1'.
APPEND lt_color.
lt_color-color-col = 2.
lt_color-color-int = 0.
lt_color-fname = 'FIELD2'.
APPEND lt_color.
data_tab-tabcolor[] = lt_color[].
append data_tab.
Best regards,
Leandro Mengue -
Have to display a dynamic table on specific height of JSP page
I have large data.
I have to show this data in dynamic table on jsp page.
the JSP page is logically divided in different pages (as this page is used for printing on specified size of page)
I can only display atmost 12 single rows on one page
but some times text of one column of row become so large that rows expands vertically and occupies space of 2 or 3 rows (thats why now i have to display 8 or 9 rows on first page and then remaining on next )
becoz of this i cant implement this check (only show 12 rows on a page).
so what can i do to show specified height of table on one page and remaining move to next page.hi,
its not so easy ...i had this problem once befor 2 months in the work
i think u have to implement a Controller.java class that controll the iterating between pages ...
u should have an pageIndex and just play with this index (increment and decrement) -
Complex conditional display in report table
Hi,
I built a report in a region, and want to make one of the columns conditionally display based on attributes from two other columns in the table. The drop-down for the conditional display only lets me refer to the current item. Is there a way I can reference the other cells in that table row in a PL/SQL expression (e.g.: something akin to #COLB# is not null and #COLC#>1000 ?)
Related question: I'm assuming the reason I can't directly change the source for the report region and can only modify it from the Query Definition tab is because I used a wizard to create it. Is there a way to "undo" this and make the source for the report fully editable? That would also solve the problem, since I could just add a function-derived column to the query.
Thanks in advance,
KeithOne final update and rephrasing of the problem, because maybe there's another way to solve this.
I have a column in a report that links to another page, but the link is only shown if a certain condition is met (which is based on other cells in this table row). I can test for those conditions in my original SQL query, so that a null value in my link column results in no user-clickable link being created. (I have to make sure that a null value appears as null on the report page, too.)
This works fine if the link text is just that: text. Because not meeting the condition returns null, so no text == no link.
Now the only problem I have comes if I want to use an icon (e.g.: the edit icon) instead of link text.
What I really want is for the icon to only appear if a certain condition is met. However, the icon replaces the column value so I can no longer use a null value to prevent the link from appearing.
The original question asked whether I can use other report cells (#foo#) in the conditional display for a cell. If that's not possible, any suggestions on how to achieve the desired effect without resorting to JavaScript?
Thanks.
Edited by: kswartz on Jun 20, 2009 1:56 AM -
Multiple and conditions in the same table
Ok I am going to kick myself for this, but I can't figure it out. I am trying to figure out how to find employees which match multiple criteria in the same table.
create table emp
(empno number,
name varchar2(10))
create table skills
(skill_id number,
skill_code varchar2(20))
create table emp_skills
(empno number,
skill_id number,
rating number)
insert into emp values(1, 'SMITH');
insert into emp values(2, 'JONES');
insert into skills values (1, 'SQL');
insert into skills values (2, 'PLSQL');
insert into skills values (3, 'JAVA');
insert into emp_skills values(1,1, 8);
insert into emp_skills values(1,2, 9);
insert into emp_skills values(1,3, 10);
insert into emp_skills values(2,1,9);
insert into emp_skills values(2,2,2);
insert into emp_skills values(2,3,7);Now I need to come up with a query finding all employees who match all 3 of the following criteria:
1) Have at least a 5 rating in SQL
2) Have at least a 6 rating in PLSQL
3) Have at least a 7 rating in JAVA
So using this I would expect to return only SMITH since his/her skills meet all 3 criteria. I dont want to use OR in my query since I want all 3 to match not just one of them.
I have a feeling I will need to self join the table - but this is going to be part of a dynamic query for APEX where the users can choose the skills and ratings they want employees to adhere to, so I dont know the number of criteria or the exact criteria in advance. But I figure if I can get a proof of concept SQL I can make it work dynamically.
Any ideas are appreciated - sorry for the long post but I figure more detail is betterwith es1 as(
select s.skill_code, es.empno, es.rating
from skills s, emp_skills es
where s.skill_id = es.skill_id
/* main */
select e.*
from emp e
where
exists
(select 'x' from es1
where es1.rating >= 5
and es1.skill_code = 'SQL'
and es1.empno = e.empno)
and
exists
(select 'x' from es1
where es1.rating >= 6
and es1.skill_code = 'PLSQL'
and es1.empno = e.empno)
and
exists
(select 'x' from es1
where es1.rating >= 7
and es1.skill_code = 'JAVA'
and es1.empno = e.empno)
-- Addition (Another example)
with es1 as(
select s.skill_code, es.empno, es.rating
from skills s, emp_skills es
where s.skill_id = es.skill_id
/* main */
select e.*
from emp e
where
(select count(distinct es1.skill_code) from es1
where
((es1.rating >= 5 and es1.skill_code = 'SQL')
or
(es1.rating >= 6 and es1.skill_code = 'PLSQL')
or
(es1.rating >= 7 and es1.skill_code = 'JAVA')
and es1.empno = e.empno)
=3; -
How can I filter which records are displayed in my dynamic table?
I have what I think is probably an easy question for anyone
who is experienced with PHP/MySQL and Dreamweaver (which I am not).
I have a website where users login, and then have access to
their homepage which displays a dynamic table of all of the records
that they have inserted into a database (this page also has a link
to the form where they submit a record). However, right now I can
only get to display all records that have been inserted instead of
only the ones that they have inserted (which is what I want). How
can I accomplish this?
I already have a session variable, 'MM_username', which
allows me to bind the user_ID to anything I need to, and when a
user inserts a record, their 'user_ID' is already inserted into a
column in that record for that table, so I'd like to display the
dynamic table in a way that filters it out so it only shows the
records that match the logged-in user's 'user_ID'.
I've tried to use the filter function in the recordset dialog
box, nut I just can't get it to work correctly. Any help on this
would be much appreciated!I already tried that. I set the table to filter out and
display only the records that match the landlord ID to the session
variable(which I named 'Landlord_ID' not 'MM_username ' like I said
earlier). When I tried to simply insert the session variable into
the page just to see what data would show up, the result is just a
blank space, so the session variable itself apparently has no data
value to echo in the PHP form.
Because of that, I have no idea how to tell dreamweaver to
filter based on the Landlord_ID, even though I CAN echo the
landlord ID variable in the recordset, I can't figure out how to
put that runtime value in the filter. -
Hello experts,
is it possible to call an ALV via ( class cl_salv or fm REUSE_ALV_GRID_DISPLAY) with a dynamic table?
This dynamic table has for example one fix column for the material number and dynamic colums for additional data.
One material has 1 additional column, the other material has two additional columns.
So i need an ALV with 3 columns material add_data1 add_data2 (add_data2 of material one is empty this is ok).
To build an itab which can handle this is possible i know.Hello Benjamin,
Maybe you already found a solution for this, but if not (or for others looking for a solution), here is a sample program that creates, fills, and displays a dynamic table:
report ztpar_dynamic_salv.
parameters: p_colnr type i default 3.
start-of-selection.
perform execute.
form execute.
data t_table type ref to data.
** create dynamic table
perform create_dynamic_table using p_colnr
changing t_table.
** fill dynamic table
perform fill_dynamic_table changing t_table.
** display dynamic table
perform display_table using t_table.
endform.
form create_dynamic_table using colnr type i
changing table type ref to data.
data: lo_field type ref to cl_abap_typedescr,
lo_struct type ref to cl_abap_structdescr,
lo_table type ref to cl_abap_tabledescr.
data: t_comp type cl_abap_structdescr=>component_table,
l_comp like line of t_comp.
lo_field ?= cl_abap_typedescr=>describe_by_name( 'CHAR10' ).
do p_colnr times.
move sy-index to l_comp-name.
concatenate 'COLUMN' l_comp-name into l_comp-name.
condense l_comp-name no-gaps.
l_comp-type ?= lo_field.
append l_comp to t_comp.
enddo.
lo_struct = cl_abap_structdescr=>create( p_components = t_comp p_strict = space ).
lo_table = cl_abap_tabledescr=>create( lo_struct ).
create data table type handle lo_table.
endform.
form fill_dynamic_table changing table type ref to data.
field-symbols: <fs_table> type standard table,
<fs_line> type any,
<fs_field> type any.
assign table->* to <fs_table>.
do 5 times.
append initial line to <fs_table> assigning <fs_line>.
do.
assign component sy-index of structure <fs_line> to <fs_field>.
if sy-subrc ne 0.
exit.
endif.
<fs_field> = sy-index.
enddo.
enddo.
endform.
form display_table using i_table type ref to data.
data lo_alv type ref to cl_salv_table.
field-symbols <fs_tab> type any table.
assign i_table->* to <fs_tab>.
try.
cl_salv_table=>factory(
importing
r_salv_table = lo_alv
changing
t_table = <fs_tab> ).
catch cx_salv_msg.
message 'Cannot display result!' type 'E'.
endtry.
lo_alv->display( ).
endform.
Best regards,
Tanguy -
Dynamic table with dynamic drop-down list values
Hi,
I need to display a dynamic table with 2 columns on an interactive form.
My Context is defined as below:
Root
StudentData 0..n
StudentName
StudentCourses 0..n
Text
Value
The 1st column should display student name, 2nd column should display student courses. The courses will be different for each student. I populated the context properly. I checked it by printing them. My DDL is bound to "Student Courses".
When there is one row -> The DDL is populated with the courses of student 1 (as there is only one).
When there are more rows -> The DDLs for all the students are populated with all the courses of all the students.
I want to see the data populated like:
TEXTFIELD DROP-DOWN LIST
Student 1------Student1-Course1
Student1-Course2
Student1-Course3
Student 2------Student2-Course1
Student2-Course2
Student2-Course3
I tried to do this in plain web dynpro using SVS.. it is also working similarly.
I have set the singleton property of nodes "StudentData" and "StudentCourses" to false.
Could any one tell me where I am going wrong?
Thanks
RamRam,
I'm not sure how much this will help, but I know I had the same problem as you when I tried to get a similar thing working, but I can't remember which of the many changes I made fixed the problem, so I'll just show you my code and perhaps you can see if anything is different than yours.
Here's where I'm creating my dropdown - in my case EastNew_RegOut is the same as your StudentData, and RateTypeDropValues is the same as your StudentCourses (the comments in the code are not meant to sound bossy to you, this is actually an example piece of code that other developers in my company "steal", so I have to put very specific instructions in there!):
int nodeSize = wdContext.nodeEastNew_RegOut().size();
for (int i = 0; i < nodeSize; i++) {
//create an element called "table", that's the element at i. So, basically it's a row. Maybe I should have
//called it "row" instead of table.
IPublicDeviceExchange.IEastNew_RegOutElement table = (IPublicDeviceExchange.IEastNew_RegOutElement)wdContext.nodeEastNew_RegOut().getElementAt(i);
//this line of code just executes an rfc that finds out what rates need to be in the dropdown for this particular row
executeRateTypeDropdown(rateCategory, table.getNum(), wdContext.currentEastNew_MeterOutElement().getReggrp());
//clear out what's already in there before we re-populate it.
table.nodeRateTypeDropValues().invalidate();
//now, I'm looping through all the values in the *actual* rate type dropdown (the one that's an RFC, populated by the above "execute" method)
for (int j = 0; j < wdContext.nodeEastRatetype_DropdownOut().size(); j++) {
//for each element in the *actual* Rate type dropdown, I'm going to create an element in my node that I created
//and set the values from the *actual* one as the values in my node.
IPublicDeviceExchange.IRateTypeDropValuesElement element = wdContext.createRateTypeDropValuesElement();
IPublicDeviceExchange.IEastRatetype_DropdownOutElement rateTypeOut = (IPublicDeviceExchange.IEastRatetype_DropdownOutElement)wdContext.nodeEastRatetype_DropdownOut().getElementAt(j);
element.setText(rateTypeOut.getText());
element.setValue(rateTypeOut.getRatetype());
//here's another key - notice how I don't say wdContext.nodeRateTypeDropValues() - it's the one that's
//directly off that table I created earlier - the thing that's essentially a row in my newReg table.
//So, what I'm doing here is adding that new element I created to the dropdown FOR THAT ROW!
//(btw, if you're trying to duplicate this, and this method does not exist for your "table" object, it's
//probably because you didn't listen to me above and you didn't create your node with the singleton property
//set to false.)
table.nodeRateTypeDropValues().addElement(element);
As for my layout... my table is bound to the EastNew_RegOut node, and the column with the dropdown is bound to RateTypeDropValues.Value (that's probably obvious, but there you have it anyway)
Finally, in my context, EastNew_RegOut is singleton = true (I was surprised about this, actually, I would have assumed it was false) with a selection of 0..1 and RateTypeDropValues has singleton set to false with a selection of 0..1
I hope that helps to some degree!
Jennifer -
How to create dynamic table using POJO based DataControl
Hi,
I'm using JDeveloper 11.1.1.5.0. I'm not using ADF BC.
I've a requirement to display the Dynamic table in my search page.
In our product we are using POJO based Data controls.
I created a task-flow and page fragment. I tried to create the dynamic table by drag-drop of searchResults from my Data control, I see the option for Read-Only Dynamic Table, but when I select this option, I don't see anything happening.
Does the Dynamic Table work with POJO data controls?
Any inputs would be helpful.
Thanks
RaviFirst U have to crate Extended View Object to your actual View obj.
Now take Page with Panel Splitter ,on First facet drag View obj as table and on second Facet Drag Extended View Obj as table.On page loading U have delete all rows from Extended View object.And then u have write bean code on button click to get current select rows from above view objct,and for Filter rows from Second View obj according to selection of rows from first view obj... -
Dynamic table rows created based on input value
I've been searching the forum for either a tutorial or input
on how to create a table where the number of rows are based on a
user input value. I can't seem to find anything on this.
Here's what I'm trying to do. I have site where people are
charged based on the number of items they register. So if they want
to register 2 items. They would input the number 2 for quanity and
I would display a dynamic table with 2 rows. The user will input
their data for the 2 items and I insert this into an
itemsRegistered table. If they entered 4 I would give them 4 rows
for input. I am using dreamweaver with PHP and MySql database. Can
anyone point me in the right direction. Any help would be
appreciated!Not exactly. The items are all the same but have a different
registration number (like a serial number). So if the user wants to
register 2 items. They would input the number 2 on the form. Then 2
rows would appear on the table, one for each registration number.
When they finish entering the data it would be inserted into the
database as 2 records.
So for example if item 1 has registration number 10000 and
item 2 has registration number 11000. The registration numbers are
unique. The table would look like this :
CustomerID (links to customer table)
RegistrationID (Unique in this table)
ItemColor
ItemShape
I don't know if I've explained this well but thanks for even
attempting to answer this! I really appreciate it! -
Display Data from multiple models in one table
Hi Experts,
Is it possible to display data from multiple models in one table smltnsly.
I have created a table dynamically.Now I would like to display data from multiple models... If this possible,can anyone give me a lead as to how to do it..
Regards
SUHi
Your Model Nodes be
Model1
---Output_Model1
Attrib1
Attrib2
Model2
---Output_model2
Attrib1
Attrib2
and the value node is
ValueNode
---Attrib1
---Attrib2
Now the coding.
int size;
IPrivate<ViewName>.IOutput_mode1Node node1 = wdContext.nodeOuptut_Model1();
IPrivate<ViewName>.IValueNodeElement elem;
size = node1.size();
for(int i=0; i<size; i++)
elem = wdContext.createValueNodeElement();
elem.setAttrib1( node1.getOutput_Model1ElementAt(i).getAttrib1() );
elem.setAttrib2( node1.getOutput_Model1ElementAt(i).getAttrib2();
wdContext.nodeValueNode().addElement( elem );
similar code for Model Node 2
Regards
Abhimanyu L -
Hide multiple rows in a dynamic table based on the row value.
Hi,
I need to hide multiple rows in a dynamic table based on the specific value of that row.
I cant find the right expression to do that.
please helpGo to the Row Properties, and in the Visibility tab, you have "Show or hide based on an expression". You can use this to write an expression that resolves to true if the row should be hidden, false otherwise.
Additionally, in the Matrix properties you should take a look at the filters section, perhaps you can achieve what you wish to achieve through there by removing the unnecessary rows instead of just hiding them.
It's only so much I can help you with the limited information. If you require further help, please provide us with more information such as what data are you displaying, what's the criteria to hiding rows, etc...
Regards
Andrew Borg Cardona -
Update multiple rows in a dynamic table Dreamweaver CS5.5
hello there
i want to update multiple rows which comes from a dynamic table in Dreamweaver CS5 (a loop in php) here is my Mysql table :
sql code
CREATE TABLE `register`.`s_lessons` (
`lid` int( 5 ) NOT NULL ,
`sid` int( 9 ) NOT NULL ,
`term` int( 5 ) NOT NULL ,
`tid` int( 5 ) NOT NULL ,
`point` double NOT NULL DEFAULT '0',
PRIMARY KEY ( `lid` , `sid` , `term` ) ,
KEY `tid` ( `tid` ) ,
KEY `point` ( `point` )
) ENGINE = MYISAM DEFAULT CHARSET = utf8 COLLATE = utf8_persian_ci;
and this is my page source code:
php file
<?php require_once('../Connections/register.php'); ?>
<?php
session_start();
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$colname1_rs1 = "-1";
if (isset($_GET['term'])) {
$colname1_rs1 = $_GET['term'];
$colname_rs1 = "-1";
if (isset($_GET['lid'])) {
$colname_rs1 = $_GET['lid'];
$colname2_rs1 = "-1";
if (isset($_SESSION['tid'])) {
$colname2_rs1 = $_SESSION['tid'];
mysql_select_db($database_register, $register);
$query_rs1 = sprintf("SELECT s_lessons.sid, s_lessons.lid, s_lessons.term, s_lessons.tid, s_lessons.point FROM s_lessons WHERE s_lessons.lid = %s AND s_lessons.term = %s AND s_lessons.tid = %s", GetSQLValueString($colname_rs1, "int"),GetSQLValueString($colname1_rs1, "int"),GetSQLValueString($colname2_rs1, "int"));
$rs1 = mysql_query($query_rs1, $register) or die(mysql_error());
$row_rs1 = mysql_fetch_assoc($rs1);
$totalRows_rs1 = mysql_num_rows($rs1);
$count=mysql_num_rows($rs1);
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
for ($j = 0, $len = count($_POST['lid']); $j < $len; $j++) {
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
$updateSQL = sprintf("UPDATE s_lessons SET point=%s WHERE tid=%s, lid=%s, sid=%s, term=%s",
GetSQLValueString($_POST['point'] [$j], "double"),
GetSQLValueString($_SESSION['tid'], "int"),
GetSQLValueString($_POST['lid'] [$j], "int"),
GetSQLValueString($_POST['sid'] [$j], "int"),
GetSQLValueString($_POST['term'] [$j], "int"));
mysql_select_db($database_register, $register);
$Result1 = mysql_query($updateSQL, $register) or die(mysql_error());
$updateGoTo = "student_lists.php";
if (isset($_SERVER['QUERY_STRING'])) {
$updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
$updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta name="keywords" content="" />
<meta name="description" content="" />
<meta http-equiv="content-type" content="text/html; charset=utf-8" />
<title>r</title>
<link href="styles/style.css" rel="stylesheet" type="text/css" media="screen" />
<link href="styles/in_styles.css" rel="stylesheet" type="text/css" media="screen" />
</head>
<body>
<div id="wrapper">
<div id="header-wrapper">
</div>
<!-- end #header -->
<div id="page">
<div id="page-bgtop">
<div id="page-bgbtm">
<div id="content">
<div class="post">
<div style="clear: both;">
<form name="form1" id="form1" method="post" action="<?php echo $editFormAction; ?>">
<table border="1" align="center">
<tr>
<th>Student ID</th>
<th>Lesson ID</th>
<th>Semester</th>
<th>Point</th>
</tr>
<?php do { ?>
<tr>
<td class="data"><label for="sid[]"></label>
<input name="sid[]" type="text" id="sid[]" value="<?php echo $row_rs1['sid']; ?>" size="9" readonly="readonly" /></td>
<td class="data"><label for="lid[]"></label>
<input name="lid[]" type="text" id="lid[]" value="<?php echo $row_rs1['lid']; ?>" size="5" readonly="readonly" /></td>
<td class="data"><label for="term[]"></label>
<input name="term[]" type="text" id="term[]" value="<?php echo $row_rs1['term']; ?>" size="4" readonly="readonly" /></td>
<td><label for="point[]"></label>
<input name="point[]" type="text" id="point[]" value="<?php echo $row_rs1['point']; ?>" size="4" />
</tr>
<?php } while ($row_rs1 = mysql_fetch_assoc($rs1)); ?>
</table>
<p>
<input type="submit" name="Submit" id="Submit" value="Submit" />
<input type="hidden" name="MM_update" value="form1" />
</p>
</form>
</div>
</div>
<div style="clear: both;">
</div>
</div>
<!-- end #content -->
<!-- end #sidebar -->
<div style="clear: both;"> </div>
</div>
</div>
</div>
<!-- end #page -->
</div>
<!-- end #footer -->
</body>
</html>
<?php
mysql_free_result($rs1);
?>
All i want is that when users click on SUBMIT button values of point column in s_lessons(database table) be updated by new entries from user.
i did my best and result with that code is :
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' lid=888, sid=860935422, term=902' at line 1
I would appreciate any idea.
with prior thanksGo to the Row Properties, and in the Visibility tab, you have "Show or hide based on an expression". You can use this to write an expression that resolves to true if the row should be hidden, false otherwise.
Additionally, in the Matrix properties you should take a look at the filters section, perhaps you can achieve what you wish to achieve through there by removing the unnecessary rows instead of just hiding them.
It's only so much I can help you with the limited information. If you require further help, please provide us with more information such as what data are you displaying, what's the criteria to hiding rows, etc...
Regards
Andrew Borg Cardona -
Dynamic tables and conditional page break
I have inserted a table in my form and have included an Add New Row button to insert additonal rows. I want a maximum of 16 rows added with a subtotal field. I want the table, then to automatically go to a new page with a subtotal field. At the end of all pages I want to include a total field. The table goes to the next page after a number of rows are entered, but there is not a break; the original form continues. How do conditionally break the page and have a (new) table display in the second page?
Thanks for your help.Hi Paul,
Thanks for working with me on this. I have sent a copy to the gmail.com address. I'm new to LiveCycle, so please forgive me.
Date: Thu, 29 Jul 2010 09:18:53 -0600
From: [email protected]
To: [email protected]
Subject: dynamic tables and conditional page break
You can accomplish that with a single table and some creative script. I suggest that you get the table worked out and working correctly then we can add in the page totals and final total afterwards. Once the table is ready email the form to mailto:[email protected] and I will put together a sample for you that shows what to do. Please include a description of what you want to do with the email as the mail message and this forum are not tied together. Also if you have a data file that fills out the table that would be useful as well.
Paul
> -
Data model with a dynamic table name
Hi,
I have report requirement, where in the table name in the data model query is unknown.So I use lexical parameter like " select * from &P_TABLE_NAME". This dynamic table is created and data populated in the before report trigger and table name is assigned to P_TABLE_NAME. The parameter P_TABLE_NAME has to be assigned an initial value otherwise the report errors with 'invalid table name' error. So I give a dummy table say 'DUMMY' as the initial value which has the same structure (with no data ) as the table that is being created in the before report trigger.
The problem is that the data model query is being parsed ( and maybe executed ) even before the 'before report' trigger is run. As a result, the report o/p is empty, since the query used the DUMMY table for execution. But after the report completes, I can see the dynamic table being created with data.
Question: Why is the before report trigger getting executed after the datamodel query is parsed and executed.
Regards,
SureshHi....
yes, these are the settings I have:
server folder: /Applications/MAMP/htdocs/dwphpelclasico
web url: http://localhost/dwphpelclasico/
They should be correct. But I still get the message:
Warning: require_once(Connections/elclasico.php) [function.require-once]: failed to open stream: No such file or directory in /Applications/MAMP/htdocs/dwphpelclasico/list.php on line 1
Could it be something with list.php?
This is a new file I created to display my tableand where I am inserted the record set.
thanks
Maybe you are looking for
-
Store procedure for sale order
hi i want store procedure that we can't add stand alone sale order without sale quatation
-
ITunes duplicates (I know youve already heard this before but hear me out)
Yes, my Itunes keep making duplicates, triplicates, etc of all my music. Heres the thing, I have gone over them MANY MANY times and there are NO duplicated files, no copies, nothing! This is REALLY making it hard to enjoy Itunes and my Ipod! These du
-
Printing Problem with Konica-Minolta CF2002
I have two different MacPro 2.66Ghz models running 10.4.8. I can not get them to provide full functionality to our Minolta CF2002. Using the EFI Driver w/ the PPD provided my Minolta I can print, but can not access features such as duplexing and pape
-
What are the backgroundjobs we schedule in grc
hello experts, pls tell me what is the requirement of scheduling background jobs in GRC sanajy
-
How can I unsync my default email with my notes app?
Turning off notes under email warns that I will lose my note info from iPad. I just want to separate my Notes as personal and confidential. How can I do this?