Cluster errors when switching messagins resources

Hi
I have two nodes configured in the sun cluster and runninng sun messaging server
1) cluster version
root@bglbbpp1 # scinstall -pvv
Sun Cluster 3.1u1 for Solaris 9 sparc
2) bglbbpp2 / # scstat -g
-- Resource Groups and Resources --
Group Name Resources
Resources: mstorebgl-rg mstorebgl-lh-res mstorebgl-hastp-res mstorebgl-msg-res
-- Resource Groups --
Group Name Node Name State
Group: mstorebgl-rg bglbbpp1 Online
Group: mstorebgl-rg bglbbpp2 Offline
-- Resources --
Resource Name Node Name State Status Message
Resource: mstorebgl-lh-res bglbbpp1 Online Online - LogicalHostname online.
Resource: mstorebgl-lh-res bglbbpp2 Offline Offline - LogicalHostname offline.
Resource: mstorebgl-hastp-res bglbbpp1 Online Online
Resource: mstorebgl-hastp-res bglbbpp2 Offline Offline
Resource: mstorebgl-msg-res bglbbpp1 Online Online - Start succeeded.
Resource: mstorebgl-msg-res bglbbpp2 Offline Offline - Stop Succeeded
bglbbpp2/ #
3) when i do scswitch to switch messaging resource from pp1 to pp2 I get below errors and it fails back to pp1.
# scswitch -z -h bglbbpp2-a-fixed.dataone.in -g mstorebgl-rg
scswitch: Resource group mstorebgl-rg failed to start on chosen node and may fail over to other node(s)
/var/adm/messages on pp2
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_prenet_start> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <300> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_prenet_start> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_prenet_start> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <1800> seconds
bglbbpp2 SC[SUNW.HAStoragePlus:2,mstorebgl-rg,mstorebgl-hastp-res,hastorageplus_prenet_start_private]: [ID 582276 daemon.warning] This node has a lower preference to node 1 for global service datadg associated with path /messaging. Device switchover can still be done to this node.
bglbbpp2 SC[SUNW.HAStoragePlus:2,mstorebgl-rg,mstorebgl-hastp-res,hastorageplus_prenet_start_private]: [ID 582276 daemon.warning] This node has a lower preference to node 1 for global service datadg associated with path /MMP. Device switchover can still be done to this node.
bglbbpp2 SC[SUNW.HAStoragePlus:2,mstorebgl-rg,mstorebgl-hastp-res,hastorageplus_prenet_start_private]: [ID 582276 daemon.warning] This node has a lower preference to node 1 for global service datadg associated with path /backup. Device switchover can still be done to this node.
bglbbpp2 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for datadg
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_prenet_start> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <1800 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_start> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <500> seconds

bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_start> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <500 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_start> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <90> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_monitor_start> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <300> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_start> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <90 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_monitor_start> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <90> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <ims_svc_start> for resource <mstorebgl-msg-res>, resource group <mstorebgl-rg>, timeout <300> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_monitor_start> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <90 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_monitor_start> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
bglbbpp2 SC[SUNW.ims,mstorebgl-rg,mstorebgl-msg-res,ims_svc_start]: [ID 855581 daemon.error] Failed to get the configuration info
bglbbpp2 Unable to initialize the MTA; compiled configuration version mismatch; recompile the configuration with imsimta cnbuild
bglbbpp2 SC[SUNW.ims,mstorebgl-rg,mstorebgl-msg-res,ims_svc_start]: [ID 450358 daemon.error] Error retrieving services from iMS configuration
bglbbpp2 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <ims_svc_start> failed on resource <mstorebgl-msg-res> in resource group <mstorebgl-rg> [exit code <1>, time used: 0% of timeout <300 seconds>]
bglbbpp2n Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_monitor_stop> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <300> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_monitor_stop> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <90> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <ims_svc_stop> for resource <mstorebgl-msg-res>, resource group <mstorebgl-rg>, timeout <300> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_monitor_stop> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <90 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <ims_svc_stop> completed successfully for resource <mstorebgl-msg-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_stop> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <1800> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_stop> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <1800 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hafoip_stop> for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, timeout <300> seconds
bglbbpp2 ip: [ID 683231 kern.notice] TCP_IOC_ABORT_CONN: local = 010.016.018.026:0, remote = 000.000.000.000:0, start = -2, end = 6
bglbbpp2 ip: [ID 440816 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hafoip_stop> completed successfully for resource <mstorebgl-lh-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <300 seconds>
bglbbpp2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <hastorageplus_postnet_stop> for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, timeout <1800> seconds
bglbbpp2 Cluster.RGM.rgmd: [ID 736390 daemon.notice] method <hastorageplus_postnet_stop> completed successfully for resource <mstorebgl-hastp-res>, resource group <mstorebgl-rg>, time used: 0% of timeout <1800 seconds>
bglbbpp2 Cluster.Framework: [ID 801593 daemon.notice] stdout: no longer primary for datadg
Please advice throw some lights where is something going wrong.
thanks

Similar Messages

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

Error When Modifying a Resource Event as Designate

Hi,
I'm developing an app for a conference room device using the C APIs and am having a problem modifying an event for a resource. If I use the same user ID as with which the event was created, everything works fine. However, I'm attempting to use an ID that is set as a designate for a group of resources, and when I do, I get a CAPI_STAT_DATA_UID_NOTFOUND error when using the CSDK_FLAG_STORE_MODIFY flag.
Here's the data I'm sending:
VERSION:2.0
PRODID://Oracle//CAPI//EN
BEGIN:VEVENT
UID:20070111T141735Z-101b6d4-65-3559-Oracle
X-ORACLE-EVENTTYPE:APPOINTMENT
DTSTART:20070111T092000
DTEND:20070111T095000
END:VEVENT
END:VCALENDAR
Flags CSDK_FLAG_STORE_MODIFY | CSDK_FLAG_STREAM_NOT_MIME
The SDk version is 10.1.2.0.0
Is there any inherent problems with this approach?
Thanks,
Dave Bowman

Here's some additional information on the problem and the sequence of events:
1) Open the connection using user ID that is a designate for the resource.
2) Change the user ID to the resource identifier ("?/RS=RENCI - Europa
Conference 520/") using CSDK_SetIdentity with the flags set to CSDK_FLAG_NONE.
The function call appears to work correctly and returns no errors.
3) Modify the event data using CSDK_StoreEvents with the the above data.
4) The error returned is: CAPI_STAT_DATA_UID_NOTFOUND. And the event ID is
correct.
I've tried both with and without using the CSDK_SetIdentity function, with the
same results.
Is it feasible to use this approach to have a resource be able to modify an
event that was created by another user? Or is the use of another ID with
higher privileges required? Such as 'SYSOP'? If the latter, obtaining SYSOP
privileges may be problematic as we are just users of the Calendar system and
not the owners.
Thx.......

Master data error - when switching an attribute to navigable

Hi,
I have a serious problem on a master data. I have this master data that until yesterday did have not a problem.
Now, when I add an attribute not navigable (DIS), no problem. When I switch to DISPLAY and activate, following error occurs:
Error in activating the InfoObjects
Characteristic 0FS_CTR_NO: The attibutes SID table(s) could not be filled
Error in BW:
Error when activating InfoObject 0FS_CTR_NO
Characteristic 0FS_CTR_NO: Error when generating master data routines
Error when resetting InfoObject 0FS_CTR_NO to the active version
I tried to make this modification also directly in Quality without transport, and the error is the same.
Master data is empty, so I cannot understand why there is a problem with SIDS.
Any suggestions?
Thanks,
Gianluca

Hi,
as Raj said, when infoobject attribute is changed from dispaly attribute to navigational attribute there will be impact.
check this thread.
Link: [Error when activating 0MATERIAL after adding Navigation attribute]
Regards
Daya Sagar

RSL failover error when compiling a resource module swf

Hi, I have migrated my application from Flex SDK 3.4 to 4.1. I am moving to Flex SDK 4.5.0.17689 (Hero Milestone build) to use the Spark Form control for better layout of the RTL languages.
I am compiling my resource bundles into SWF files and using them. I am including the required framework bundles also when compiling my resources into SWF. It was working well with SDK 4.1. But when I am trying to compile the resource bundles with SDK 4.5.0, I am getting the following RSL failover.
Loading configuration file C:\Program Files (x86)\Adobe\Adobe Flash Builder Burrito\sdks\4.5.0\frameworks\flex-config.xml
Required RSLs:
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.17689/framework_4.5.0.17689.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/tlf/2.0.0.139/textLayout_2.0.0.139.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.17689/spark_4.5.0.17689.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.17689/sparkskins_4.5.0.17689.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.17689/rpc_4.5.0.17689.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.17689/osmf_1.0.0.16316.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.17689/mx_4.5.0.17689.swz with 1 failover.
D:\FlashBuilder_Burritto\myApp\src\MyAppResources_en.swf (39276 bytes)
The SWF files gets generated, I copied it to the deployment folder and when I start the application, I am getting the following error even though this bundle is included in my compile command.
Error: Could not find compiled resource bundle 'core' for locale 'en'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\hero_private_bet a\frameworks\projects\framework\src\mx\resources\ResourceManagerImpl.as:367]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\hero_private_be ta\frameworks\projects\framework\src\mx\resources\ResourceManagerImpl.as:287]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()[E:\dev\hero_private_beta\fram eworks\projects\framework\src\mx\core\FlexModuleFactory.as:631]
    at mx.core::FlexModuleFactory/docFrameHandler()[E:\dev\hero_private_beta\frameworks\projects \framework\src\mx\core\FlexModuleFactory.as:601]
    at mx.core::FlexModuleFactory/docFrameListener()[E:\dev\hero_private_beta\frameworks\project s\framework\src\mx\core\FlexModuleFactory.as:129]
This is the command that I use to compile resource bundles into SWF file.
C:\"Program Files (x86)"\Adobe\"Adobe Flash Builder Burrito"\sdks\4.5.0\bin\mxmlc -locale=en -source-path=locale/{locale} -include-resource-bundles=core,effects,skins,styles,components,layout,MyAppResources -output MyAppResources_en.swf
What do I need to do to remove the above error?

Dear Vijayudu1,
First things first.
1. Failovers are NOT errors. They are just showing that if particular url set for the RSL(Runtime Shared Libraries) as mentioned in flex-config.xml, is not found then they had used a backup url to get connected.
Have a reference from : http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf674ba-7fff.html
2. Try using: -locale en_US -source-path=locale/{locale} -keep-all-type-selectors=true ,and other paramaters for compiling resource bundles. Hope you may resolve your errors.

"View failed to load" error when I open Resources - Project Server 2013

Hello,
I get the following error when I open the Resources Page (I am using Project Server 2013):
"The view failed to load. Press OK to reload this view with the default settings. Press Cancel to select another view"
Help please.

Hi,
Is your environment up to date with the latest SP/CU?
HAve you tried selecting another view?
See those hotfix :
http://support.microsoft.com/kb/2760261/en-us
http://support.microsoft.com/kb/2863881/en-us
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Event Code Error when switching networks

Although I am running a standalone version of P6 on my laptop, I continually receive event code errors when I switch between two networks. This often happens when I need to switch from a client network to my mobile hotspot. Or, if I'm away from laptop for any length of time and it 'goes to sleep' without having closed out of P6, when I return I will have an event code error that requires me to close and then restart P6.
I'm running Windows 7 SP1, Firefox 24.0, P6 Release 7.0.0 (Build 00000092)
Any help is greatly appreciated.

Hi,
In regards to the problem when the computer goes to sleep, if you look in the event viewer you will see that Windows is dropping the network connection - not sure of any other workaround to this than disabling the sleep/hibernate function.
As for the problem when you switch between networks, other than making sure you log out before making the network switch the only thing I can think of would be to try and make sure the connection is using 'localhost' or possibly '127.0.0.1' instead - this is in the vague hope that these connections will hold true even when the network behind the scenes is changing (this also assumes SQL Server, changing this for an Oracle XE database would be a bit different)
Good luck.
Regards
Alex

Error when switching accounts in XP

I get an error when I switch to another account on my win xp prof.
the error message is "
Core Center
Failed to load hardware monitor driver
When I click OK I get the next error message "
No Hardware Monitor !
After clicking OK again the systems craches en reboots
Anyons know how to fix this ??
TiA

I personally don't reccomend the use of "corecenter" and I don't have a solution, but what it sounds like to me is a poorly scripted peice of software. See, when you "switch" accounts, but don't log off, some of the registry remains, and possibily the software doesn't see that you have switched users, so it's looking around for something that isn't there.
So in other words, I don't like corecenter, most of us around here use speedfan.
So if anyone knows of a solution....

Error when switching between drafts: "The instruction at "0x009f6487" ...

Running Contribute CS3 and get this error frequently when switching between documents in the Draft Console:
The instruction at "0x009f6487" referenced memory at "0x06bd7a24". The memory could not be "read".
Click on OK to terminate the program
Click on Cancel to debug the program
I do not get this error any other time. Only when editing multiple documents and switching between them. Clicking Save for Later on the toolbar, instead of clicking directly on the document in the Draft Console does not help.
Any help or suggestions are much appreciated.

Can you please try clearning the Contribute preferences?
To Clear the preference, quit Contribute, and then delete the Contribute CS3 folder in C:\Documents and Settings\<user>\Local Settings\Application Data\Adobe\ and also run the following command " reg delete "HKCU\Software\Adobe\Contribute 4.1" /f " if you are using Contribute CS3. Reconnect to the site and try the same scenario.
Note that, if you clear the preferences then no connection will be listed in Contribute, you need to recreate the connections. It will be like a fresh installation.

Sun cluster failed when switching, mount /global/ I/O error .

Hi all,
I am having a problem during switching two Sun Cluster nodes.
Environment:
Two nodes with Solaris 8 (Generic_117350-27), 2 Sun D2 arrays & Vxvm 3.2 and Sun Cluster 3.0.
Porblem description:
scswitch failed , then scshutdown and boot up the both nodes. One node failed because of vxvm boot failure.
The other node is booting up normally but cannot mount /global directories. Manually mount is working fine.
# mount /global/stripe01
mount: I/O error
mount: cannot mount /dev/vx/dsk/globdg/stripe-vol01
# vxdg import globdg
# vxvol -g globdg startall
# mount /dev/vx/dsk/globdg/mirror-vol03 /mnt
# echo $?
0
port:root:/global/.devices/node@1/dev/vx/dsk 169# mount /global/stripe01
mount: I/O error
mount: cannot mount /dev/vx/dsk/globdg/stripe-vol01
Need help urgently
Jeff

I would check your patch levels. I seem to remember there was a linker patch that cause an issue with mounting /global/.devices/node@X
Tim
---

NoClassDefFoundError error when deploying a resource adapter rar file

Hi,
Iam trying to deploy a resource adapter(RA) rar file which uses orabpel.jar.
1. When i dont package the orabpel.jar along with the adapter, i get the following error during deployment
[Apr 19, 2007 8:05:00 PM] Connector Module Deployer for BRMAdapter STARTS.
[Apr 19, 2007 8:05:00 PM] Copy the archive to E:\product\10.1.3.1\OracleAS_1\j2ee\home\connectors\BRMAdapter\BRMAdapter.rar
[Apr 19, 2007 8:05:00 PM] Unpacking BRMAdapter.rar
[Apr 19, 2007 8:05:00 PM] Done unpacking BRMAdapter.rar
[Apr 19, 2007 8:05:00 PM] Starting up resource adapter
[Apr 19, 2007 8:05:00 PM] Exception: NoClassDefFoundError: oracle/tip/adapter/api/exception/PCRetriableResourceException
[Apr 19, 2007 8:05:00 PM] Operation failed with error: oracle/tip/adapter/api/exception/PCRetriableResourceException
2. If i package the orabpel.jar file along with the RA, i get ClassCastException.
3. I tried including the imported-shared-libraries section in the packaged oc4j-ra.xml, but this gets overwritten as part of the deployment.
4. I removed the above class which gave NoClassDefFoundError and then tried deploying and got the following error
[Apr 19, 2007 7:49:07 PM] Connector Module Deployer for BRMAdapter STARTS.
[Apr 19, 2007 7:49:07 PM] Copy the archive to E:\product\10.1.3.1\OracleAS_1\j2ee\home\connectors\BRMAdapter\BRMAdapter.rar
[Apr 19, 2007 7:49:07 PM] Unpacking BRMAdapter.rar
[Apr 19, 2007 7:49:07 PM] Done unpacking BRMAdapter.rar
[Apr 19, 2007 7:49:07 PM] Starting up resource adapter
[Apr 19, 2007 7:49:07 PM] Exception: NoClassDefFoundError: Missing class: oracle.tip.adapter.api.OracleConnectionFactory Dependent class: oracle.tip.adapter.brm.BRMConnectionFactory Loader: BRMAdapter:0.0.0 Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/connectors/BRMAdapter/BRMAdapter/BRMAdapter.jar Configuration: in E:\product\10.1.3.1\OracleAS_1\j2ee\home\connectors\BRMAdapter\BRMAdapter The missing class is available from the following locations: 1. Code-Source: /E:/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar (from in /E:/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml) This code-source is available in loader oracle.bpel.common:10.1.3.
[Apr 19, 2007 7:49:07 PM] Operation failed with error: Missing class: oracle.tip.adapter.api.OracleConnectionFactory Dependent class: oracle.tip.adapter.brm.BRMConnectionFactory Loader: BRMAdapter:0.0.0 Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/connectors/BRMAdapter/BRMAdapter/BRMAdapter.jar Configuration: in E:\product\10.1.3.1\OracleAS_1\j2ee\home\connectors\BRMAdapter\BRMAdapter The missing class is available from the following locations: 1. Code-Source: /E:/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar (from in /E:/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml) This code-source is available in loader oracle.bpel.common:10.1.3.
Here is the oc4j-ra.xml i package:
<?xml version="1.0"?>
<oc4j-connector-factories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://www.oracle.com/technology/oracleas/schema/oc4j-connector-factories-10_0.xsd"
schema-major-version="10" schema-minor-version="0">
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"></import-shared-library>
</imported-shared-libraries>
<connector-factory location="eis/BRM" connector-name="OracleBRMAdapter">
<config-property name="ConnectionString" value="ip blrhpdv3 12006"></config-property>
<config-property name="DBNumber" value="1"></config-property>
<connection-pooling use="none"/>
<security-config use="none"/>
<connectionfactory-interface>
javax.resource.cci.ConnectionFactory
</connectionfactory-interface>
</connector-factory>
</oc4j-connector-factories>
Currently i package orabpel.jar file along with the RA rar file, deploy, later go and modify the oc4j-ra.xml from application-deployments/... to include the imported-shared-libraries, remove the orabpel.jar from the connectors/BRMAdapter directory, restart the AS and it works
Iam using Oracle AS 10.1.3 as part of the SOA Suite.
Any help would be appreciated.

Found a soln, add the codesource to the j2ee instance application.xml
eg adding the following
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
solves the problem. Make sure the shared libraries are installed and is added to the instance server.xml
This is described in "Oracle® Containers for J2EE Developer’s Guide 10g (10.1.3.1.0)"
But not sure if the end customers need to be told to edit the configuration file manually.

Error when creating a resource : Failed to initialize the DSDL

Hi,
I've configured a cluster and trying to configure an Oracle mount point. ,ve already created the listerner and server resources for Oracle but having the following error with mount point creation:
Command executed: /usr/cluster/bin/clresource create -t SUNW.HAStoragePlus:5
-g int_group -p
Resource_project_name=default -p FilesystemMountPoints=/global/data
oracle_mount_point
Error message:
clresource: pegase-par-sun-wfl-int-a - Failed to process the resource
information.Failed to
initialize the DSDL.
clresource: (C189917) VALIDATE on resource oracle_mount_point, resource
group int_group, exited with
non-zero exit status.
clresource: (C720144) Validation of resource oracle_mount_point in resource
group int_group on node
pegase-par-sun-wfl-int-a failed.
clresource: (C891200) Failed to create resource "oracle_mount_point"
Could you please help me?

should i have to install a particular library or something like that? DSDL ?
thanks for your help

Error when switching clients in Awesome floating mode

When on a tag in floating mode, if I use the Mod-j or Mod-k keybinding to switch clients, I get the following message:
/usr/share/awesome/lib/awful/client.lua:827: attempt to index local 'colfact' (a nil value)
The keybindings are defined as:
awful.key({ modkey, }, "j",
function()
awful.client.focus.byidx( 1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "k",
function()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end),
Those keys work just fine in tiled tags; I only get this error on floating tags.
Any ideas?
Thanks!

Hi,
Chk out this thread ,
Data Request remains in yellow status after RSAPO_CLOSE_TRANS_REQUEST
Regards,
Priya.

Outlook 2007 getting error when books the resources

Hi Guys,
I have the very interested problem here. We have two offices, A and B. Each office has a couple of meeting rooms as resources listed in GAL. When office A users tried to book office A meeting rooms from outlook 2007, they got the error message
You marked "xxxxx" as a resource. You cannot schedule a meeting with "xxxxx" because you don't have permission for that account. Either enter the name as a required or optional attendee or talk to your administrator about giving
you permission to schedule "xxxxx"
But when I login as the same user on another laptop which has outlook 2010 installed, there is no problems to book the same room at all. And when I tried to book the room in office B with outlook 2007, no problems. Comparing the settings of those two rooms
from exchange side, there is no difference. Same problems happened in all office A resources, but no effect on office B.
PS 1. Not try ask office B users book the room in office A yet.
2. tried the different ways to book the room from Outlook 2007, and same error message at the end.
Any idea to get it fixed?
Regards,
David

Hi,
Please note, it suggests to change the permission to Editor, that's because the resource mailbox requires Editor permissions for the delegate or manager that tries to modify the appointment items from the resource mailbox.
By the way, I found this:
http://community.spiceworks.com/topic/261812-exchange-2010-meeting-room-permissions
Try the suggestion mentioned in that thread:
Try creating a profile for one of the resource rooms you are having problems with. Then log into that profile with Outlook. In Outlook navigate to Tools -> Options -> Preferences -> Calendar Options -> Resource Scheduling -> If any of the
checkboxes are checked, uncheck them, then on one of the users who got the error, now try to book the resource and see if it still errors out.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Swinstsvrui error when switching on N95 8GB

When I switch on my phone (N95 8GB), an application starts to run automatically. Then it says "cannot install the file found on the mass memory". However, this message does not appear when I close Swinstsvrui.exe at startup.
When I look at the mass memory, I cannot find relevant files.
Does anybody know how to kill this error message?

Additionally, I want to mention here that I don't want to reinstall the Symbian software.
Please inform me if you have a solution.

Cluster errors when switching messagins resources

Similar Messages

Maybe you are looking for