Cluster Installation failure on AIX 6.1

Hi All,
One of my customers is facing an issue with the RAC installation.
The issue is being observed as soon as the setup is done and while running the root.sh which tries to bring up the services configure.
Post which we are not even able to bring up the same manually or using VIPCA.
Details:
A status check on nodeapp is resulting the below.
./srvctl status nodeapps -n lpar1
VIP is not running on node: lpar1
GSD is running on node: lpar1
PRKO-2016 : Error in checking condition of listener on node: lpar1
ONS daemon is running on node: lpar1
Please let me know any thoughts on the same.
Thanks in advance for your help
Thanks & Regards,
Anoop

Thanks and that very helpful.
That error got corrected but he hit a new error.
This time its this error :
./srvctl start nodeapps -n lpar1
Lpar1:ora.lpar1.vip:Invalid parameters, or failed to bring up VIP (host=lpar1)
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.lpar1.vip'.
My guess was that there is something wrong with the etc/hosts which is causing this vip issue:
The etc host looks like this:
127.0.0.1          loopback localhost     # loopback (lo0) name/address
#255.255.255.128     172.21.197.167
172.21.197.168     lpar1
172.21.197.163 SPEAIXP5LP11 SPEAIXP5LP11.ad.infosys.com
172.21.197.171 speaixp5lp51
172.21.197.166 speaix550-2 speaix550-2.ad.infosys.com
172.21.197.143 SPEHPPA2 SPEHPPA2.ad.infosys.com
172.21.197.170 lpar2 lpar2.ad.infosys.com
172.21.197.172 speaix5501 speaix5501.ad.infosys.com
172.21.197.169 speaixp5lp41 speaixp5lp41.ad.infosys.com
172.21.197.246 spe66hp2 spe66hp2.ad.infosys.com
172.21.197.148 speaix1
172.21.197.247 spe76hp1 spe76hp1.ad.infosys.com
172.21.197.180 spesuns4p1 spesuns4p1.ad.infosys.com
#Virtual IP Address
172.21.197.228 lpar1-vip
172.21.197.229 lpar2-vip
#Interconnect RAC
10.2.2.3 lpar2-priv
10.2.2.2 lpar1-priv
10.66.119.59 TCCSERVER TCCSERVER.ad.infosys.com
Any pointers will be very helpful.
Thanks for your help again.
Thanks in advance
Thanks & Regards,
Anoop

Similar Messages

SQL 2008 R2 cluster installation failure - Failed to find shared disks

Hi,
The validation tests in the SQL 2008R2 cluster installation (running Windows 2008 R2) fails with the following error. The cluster has one root mount point with multiple mount points :
"The cluster on this computer does not have a shared disk available. To continue, at least one shared disk must be available'.
The "Detail.txt" log has alot of "access is denied" errors and here is just a sample. Any ideas what might be causing this issue?
2010-09-29 12:54:08 Slp: Initializing rule      : Cluster shared disk available check
2010-09-29 12:54:08 Slp: Rule applied features : ALL
2010-09-29 12:54:08 Slp: Rule is will be executed : True
2010-09-29 12:54:08 Slp: Init rule target object: Microsoft.SqlServer.Configuration.Cluster.Rules.ClusterSharedDiskFacet
2010-09-29 12:54:09 Slp: The disk resource 'QUORUM' cannot be used as a shared disk because it's a cluster quorum drive.
2010-09-29 12:54:09 Slp: Mount point status for disk 'QUORUM' could not be determined. Reason: 'The disk resource 'QUORUM' cannot be used because it is a cluster quorum drive.'
2010-09-29 12:54:09 Slp: System Error: 5 trying to find mount points at path
\\?\Volume{e1f5ca48-c798-11df-9401-0026b975df1a}\
2010-09-29 12:54:09 Slp:     Access is denied.
2010-09-29 12:54:09 Slp: Mount point status for disk 'SQL01_BAK01' could not be determined. Reason: 'The search for mount points failed. Error: Access is denied.'
2010-09-29 12:54:10 Slp: System Error: 5 trying to find mount points at path
\\?\Volume{e1f5ca4f-c798-11df-9401-0026b975df1a}\
2010-09-29 12:54:10 Slp:     Access is denied.
2010-09-29 12:54:10 Slp: Mount point status for disk 'SQL01_DAT01' could not be determined. Reason: 'The search for mount points failed. Error: Access is denied.'
2010-09-29 12:54:10 Slp: System Error: 5 trying to find mount points at path
\\?\Volume{e1f5ca56-c798-11df-9401-0026b975df1a}\
2010-09-29 12:54:10 Slp:     Access is denied.
Thanks,
PK

Hi,
We were asked by the PSS engineer to give the following privileges the account used to install SQL Server - i am referring to the user domain account as apposed to the SQL service account. These privileges were already applied to the
SQL service account prior to the SQL installation. Assigning these privileges to the user account resolved the issue.
Act as Part of the Operating Sywstem = SeTcbPrivileg
  Bypass Traverse Checking = SeChangeNotify
  Lock Pages In Memory = SeLockMemory
  Log on as a Batch Job = SeBatchLogonRight
  Log on as a Service = SeServiceLogonRight
  Replace a Process Level Token = SeAssignPrimaryTokenPrivilege
Thanks for everyones assistance.
Cheers,
PK

SAP Cluster Installation instance number issue

Hi,
We had some problem about the sap cluster installation .
OS : AIX 6.1
Database : DB2
We are trying to install the sap cluster under AIX + DB2.
But we are not sure whether we have
CI instance = 00
DI instance = 03
will it have problem . ( e.g. will we need to adjust the transport
configuration eachange due to the instance number different )
Because we had saw other case on window which is
CI instance = 00
DI instance = 00
So which is working fine and no problem.
Please help and give some recommendations. We would like to confirm is window / aix the same , are there any concern here( CI instance is need to different
with DI or not , if not what will be affect. ) .
Regards

Hi,
Per my understanding the
stms > system overview > [SID of the cluster] > Display TMS Configuration : System xxx > communicate tag > RFC Address
on that column is not able to use logon group.
But if you not setting that part correctly , then the auto transport is not able to do e.g. QAS forward the request to PRD
Am I correct ?
thx,
Tony

ABAP+JAVA in Cluster installation

Hello gurus,
I've read all tha SAP HA documents and have noticed that in several cluster installation they split up
the ABAP SCS and JAVA SCS from the CI when installaing a double-stack system (ABAP+JAVA).
As much as I know, the SCS instances doesn't require a lot of memory or cpu, they are not the problem when there is a bottleneck (correct me if I'm worng ...).
So, what is the reason for splitting up the SCS isntances from the cluster group of central instance ?
Please advice,
Dimitry Haritonov

Hello Dimitry,
Basically the SCS instances determine the CI. Without having running message and enqueue servers, there is not a running NetWeaver cluster at all. So these processes together with the database and the global file system are critical for the cluster and its high availability. These are the so called single points of failures and need to be protected by the failover cluster. For more details refer to sections 2.2.4, 2.3.2 and 4.1 of "SAP WAS in Switchover Environments" technology handbook available at service marketplace.
You are right that SCS processes do not consume a lot of memory and cpu. They do not require a lot of time to start so for performance reasons it makes sense to split them from the ABAP and Java processes, which are much slower. If the SCS instances are installed in a separate cluster group than the whole CI, the switchover process will take less time.
I hope I answered to your question.
Best Regards
Vyara

RAC 11gR2 cluster installation: root.sh failed on the 1st node

Hi,
Does anybody know why is possible when I run the root.sh on the 1st node, during the Oracle 11gR2 RAC installation (cluster installation) to get the following error?
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: y
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-06-29 14:17:43: Parsing the host name
2010-06-29 14:17:43: Checking for super user privileges
2010-06-29 14:17:43: User has super user privileges
Using configuration parameter file: /oracle/grid/crs/install/crsconfig_params
Creating trace directory
User oracle has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'trz1test_rac'
CRS-2672: Attempting to start 'ora.mdnsd' on 'trz1test_rac'
CRS-2676: Start of 'ora.gipcd' on 'trz1test_rac' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'trz1test_rac'
CRS-2676: Start of 'ora.gpnpd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'trz1test_rac'
CRS-2676: Start of 'ora.cssdmonitor' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'trz1test_rac'
CRS-2672: Attempting to start 'ora.diskmon' on 'trz1test_rac'
CRS-2676: Start of 'ora.diskmon' on 'trz1test_rac' succeeded
CRS-2676: Start of 'ora.cssd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'trz1test_rac'
CRS-2676: Start of 'ora.ctssd' on 'trz1test_rac' succeeded
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'trz1test_rac'
CRS-2676: Start of 'ora.crsd' on 'trz1test_rac' succeeded
Now formatting voting disk: /data_gpfs/oracle/crs/vdsk.
CRS-4603: Successful addition of voting disk /data_gpfs/oracle/crs/vdsk.
## STATE File Universal Id File Name Disk group
1. ONLINE 653624f2aa1f4f83bf774e8052889a32 (/data_gpfs/oracle/crs/vdsk) []
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'trz1test_rac'
CRS-2677: Stop of 'ora.crsd' on 'trz1test_rac' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'trz1test_rac'
CRS-2677: Stop of 'ora.ctssd' on 'trz1test_rac' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'trz1test_rac'
CRS-2677: Stop of 'ora.cssdmonitor' on 'trz1test_rac' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'trz1test_rac'
CRS-2677: Stop of 'ora.cssd' on 'trz1test_rac' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'trz1test_rac'
CRS-2677: Stop of 'ora.gpnpd' on 'trz1test_rac' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'trz1test_rac'
CRS-2677: Stop of 'ora.gipcd' on 'trz1test_rac' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'trz1test_rac'
CRS-2677: Stop of 'ora.mdnsd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'trz1test_rac'
CRS-2676: Start of 'ora.mdnsd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'trz1test_rac'
CRS-2676: Start of 'ora.gipcd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'trz1test_rac'
CRS-2676: Start of 'ora.gpnpd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'trz1test_rac'
CRS-2676: Start of 'ora.cssdmonitor' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'trz1test_rac'
CRS-2672: Attempting to start 'ora.diskmon' on 'trz1test_rac'
CRS-2676: Start of 'ora.diskmon' on 'trz1test_rac' succeeded
CRS-2676: Start of 'ora.cssd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'trz1test_rac'
CRS-2676: Start of 'ora.ctssd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'trz1test_rac'
CRS-2676: Start of 'ora.crsd' on 'trz1test_rac' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'trz1test_rac'
CRS-2676: Start of 'ora.evmd' on 'trz1test_rac' succeeded
*/oracle/grid/bin/srvctl start nodeapps -n trz1test_rac ... failed*
Configure Oracle Grid Infrastructure for a Cluster ... failed
This is because ora.eONS daemon is not starting. There is a Metalink note that we MIGHT start this daemon manually ... but this is not working.
*./srvctl status nodeapps -n trz1test_rac*
-n <node_name> option has been deprecated.
VIP trz1test_rac_vip is enabled
VIP trz1test_rac_vip is running on node: trz1test_rac
Network is enabled
Network is running on node: trz1test_rac
GSD is disabled
GSD is not running on node: trz1test_rac
ONS is enabled
ONS daemon is running on node: trz1test_rac
eONS is enabled
eONS daemon is not running on node: trz1test_rac

I run my clusterware/DB on AIX 5.3
When I run runcluvfy.sh here are the things which are not passing:
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
trz2test_rac:en5 trz2test_rac:en5 yes
trz2test_rac:en5 trz1test_rac:en5 yes
trz2test_rac:en5 trz1test_rac:en5 yes
trz2test_rac:en5 trz1test_rac:en5 yes
trz2test_rac:en5 trz1test_rac:en5 yes
trz1test_rac:en5 trz1test_rac:en5 yes
Result: Node connectivity passed for subnet "192.168.1.0" with node(s) trz2test_rac,trz1test_rac
Check: TCP connectivity of subnet "192.168.1.0"
Source Destination Connected?
trz1test_rac:192.168.1.140 trz2test_rac:192.168.1.142 failed
trz1test_rac:192.168.1.140 trz2test_rac:192.168.1.142 failed
Result: TCP connectivity check failed for subnet "192.168.1.0"
NTP daemon slewing option check failed on some nodes
PRVF-5436 : The NTP daemon running on one or more nodes lacks the slewing option "-x"
Result: Clock synchronization check using Network Time Protocol(NTP) failed
NTP mustn't be a problem I guess as the date are identical on the 2 nodes.
I have no idea how to fix the TCP connectivity issue with the subnet "192.168.1.0". Some posts wrote that could be a firewall issue. Are there any other causes ?
Thanks to all,
Paul

ERP ECC 6.0 Cluster Installation under MS SQL Server 2005

Hi,
anybody in the world did a ECC 6.0 Cluster installation under MS SQL Server 2005 database?
Can anyone please share some usefull documents to understand... This is new to me and doing it for first time.
Pls help
RGC

Hi,
I'm looking for a customized document for ECC installation (how to document) and not a SAP Standard one as i'm new to cluster. Please share if any.
How to configure the nodes in three tier architecture?
In which node the DB should be installed?
In which node the CI should be installed?
How to configure Central Point of Failure (CPOF)?
How the ECC 6.0 cluster works and how to distribute the resources (SAP) across nodes?
What are the resources that needed for failover from one node to another?
Expecting help.
rgds
RGC

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Windows 8 installation failure with German language pack

Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}

Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information

Cluster Installation - SQL 2005 / 2003 - Creating cluster group

Hi All,
I am working on the cluster Installation in our environment and facing some issues at the time of installing first node MSCS Installation. let me summarize the activities done so far
Environment Details
Physical Disk :
G: (Physical Disk - SAN )
I : (Physical Disk - SAN )
C: Local disk
Q: (Physical Disk Quorum - SAN )
F: (Database and logs)
-- > SCS installed locally in the server in G drive
Virtual Hostname and IP : SeparateIP & cluster1
Node 1: Hostname and separate IP
Node 2 : hostname and Separate IP
Installed MSCS service and tested the same - its working fine
Installed SQL 2005 database in cluster mode and its working fine
Started installing SAP
Step 1: Installation of SCS instance in node A (Used F drive) - Successfull Installed
Step 2: Installation of First node MSCS in node A
Here I am facing an issue, in the end phase of the installation it will ask for creating cluster group -- > There I need to define the Global disk as F (Which is defined at the time of installing SCS instance) - But i dont see that disk is available in the drop down box .
Is there any other workaround to bring the Global disk while creating the cluster group (First node MSCS installation)
Looking forward for your suggestions
Thanks and Regards
Vijay

Regret for the late update
112266 solved my problem and In my case, I have bisected the disk as two but in the cluster environment that should not be the case. Ensure the the same in disk management
Regards
Vijay

Adobe Camera Raw 6.7 Installation Failure

From Adobe Bridge CS5, I enter Help, then Updates.
Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
I click to install, the software is downloaded tha I get an Installation Failure message.
When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
At no point during the installation was I asked for the serial number.
Regards
Mike

Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Acrobat X pro installation failure

I always have had problem with Acrobat installation.
Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
Here are the error messages:
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Infact, the Creative Suite is the very few first applications I installed after Windows set up.
Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

MSCS cluster installation on win + sql server 2005

Dear Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisit & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarni
Message was edited by:
amol kulkarni

Hi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier

PI 7.0 Cluster Installation guidelines

Hello and Merry Christmas,
is there any step by step guide for installing PI 7.0 in MScluster? is the first time that i have to perform Abap&Java cluster installation.
Thank you,
Dimitrios

Dimitrios,
Check the below links
Installation
High Availability
Cheers
Agasthuri

XREF best practices in ESB cluster installation-OESB10.1.3.3

Hi,
We are using Oracle ESB during last 2 years.
2 months ago I migrated our ESB installation to ESB Cluster in production (1 ESB DT, 1 ESB RT for polling
adapters, 2 ESB RT for further message processing).
We are using SOA Suite 10.1.3.3 with MLR#17 applied.
I faced a issue with XREF (populateXRefRow XPath function) in production system and need assistance.
All our ESB Processes contains next main parts:
1) Polling DB-adapter (or FTP-adapter, this didn't matter) that initiates a ESB process, routing service for that polling adapter
that asyncronously (!) invokes Requestor ABC level services (AIA terms);
2) Requestor ABC level-services perform XREF population and continues message
processing.
XREF population is doing with next steps:
we call lookupXRefRow XPath function, if value is not present in XREF, we doing
populateXRefRow call.
This logic is working fine when we are not using ESB cluster, but now step 2) (ReqABC level) is performed by different ESB servers
and frequently we faced unique constraint violation error on XREF_DATA
population (during populateXrefRow call).
ESB RT nodes using to balance load but transmitted data is intersected. For example, we are poll not documents but document details instead (polling table populated by Oracle Streams, there are no guarantee that document header receives earlier than document details, because our system is high loaded and we are using commit_serialization=none with parallelism at APPLY processes).
Each ESB RT instance can receive different rows of same document and xref population done at document header level.
My question is: what is best practices to work with XREF in ESB cluster installations?
May be other peoples faced with this issue and how this issue was resolved?
I know possible workarounds to accomplish this task: not call populateXRefRow function in XSLT, instead call PL/SQL procedure or function that working same but can ignore any exceptions.
This's solution not liked to me, but I dont know any other solutions.
Also I cannot not populate XREF because XREF actively used in inter-systems communication.

Hi,
We are using Oracle ESB during last 2 years.
2 months ago I migrated our ESB installation to ESB Cluster in production (1 ESB DT, 1 ESB RT for polling
adapters, 2 ESB RT for further message processing).
We are using SOA Suite 10.1.3.3 with MLR#17 applied.
I faced a issue with XREF (populateXRefRow XPath function) in production system and need assistance.
All our ESB Processes contains next main parts:
1) Polling DB-adapter (or FTP-adapter, this didn't matter) that initiates a ESB process, routing service for that polling adapter
that asyncronously (!) invokes Requestor ABC level services (AIA terms);
2) Requestor ABC level-services perform XREF population and continues message
processing.
XREF population is doing with next steps:
we call lookupXRefRow XPath function, if value is not present in XREF, we doing
populateXRefRow call.
This logic is working fine when we are not using ESB cluster, but now step 2) (ReqABC level) is performed by different ESB servers
and frequently we faced unique constraint violation error on XREF_DATA
population (during populateXrefRow call).
ESB RT nodes using to balance load but transmitted data is intersected. For example, we are poll not documents but document details instead (polling table populated by Oracle Streams, there are no guarantee that document header receives earlier than document details, because our system is high loaded and we are using commit_serialization=none with parallelism at APPLY processes).
Each ESB RT instance can receive different rows of same document and xref population done at document header level.
My question is: what is best practices to work with XREF in ESB cluster installations?
May be other peoples faced with this issue and how this issue was resolved?
I know possible workarounds to accomplish this task: not call populateXRefRow function in XSLT, instead call PL/SQL procedure or function that working same but can ignore any exceptions.
This's solution not liked to me, but I dont know any other solutions.
Also I cannot not populate XREF because XREF actively used in inter-systems communication.

Cluster Installation failure on AIX 6.1

Similar Messages

Maybe you are looking for