Cluster setup in remote machines using weblogic8.1??

          Hi,
          How to run a clustered setup in remote machines??
          This is my setup:
          I have a domain called mydomain
          I have three server instances Adminserver, ManagedServer1 and ManagedServer2.
          I have a cluster called cluster1 with two servers , (ManagedServer1 and ManagedServer2).
          I have two machines, machine1(localhost) and machine2(remote machine connected
          to LAN).
          My machine1 has two servers , Adminserver, ManagedServer1 and
          My machine2 has one server ManagedServer2.
          I have installed weblogic 8.1 in both the machines.
          I have started nodemanager in machine1 .
          Iam able to run Adminserver and Managedserver1 in machine1(localhost)
          My question:
          1. I have to run the managedserver2 in the remote machine.
          2. Should i create a domain of the same name called mydomain in machine2(remote
          machine)???
          3. Already nodemanager is running in machine1.............Should i run nodemanager
          in machine2(remote machine) also ???
          4. What should be my configuration parameters (Java home, bea home,classpath,rootdirectory,arguments)
          for managedserver2 ??? should these details be with respect to machine1 or machine2???
          thanks&rgds,
          girish

you just need to install wls and configure the domain there on that machine
 2 and run the startmanagedserver script to use the admin server url and it
 will get its configuration from there. better yet, if you have a shared
 installation use that.
 "Girish" <[email protected]> wrote in message
 news:[email protected]...
 >
 > Hi,
 > How to run a clustered setup in remote machines??
 >
 > This is my setup:
 > I have a domain called mydomain
 > I have three server instances Adminserver, ManagedServer1 and
 ManagedServer2.
 > I have a cluster called cluster1 with two servers , (ManagedServer1 and
 ManagedServer2).
 > I have two machines, machine1(localhost) and machine2(remote machine
 connected
 > to LAN).
 > My machine1 has two servers , Adminserver, ManagedServer1 and
 > My machine2 has one server ManagedServer2.
 >
 > I have installed weblogic 8.1 in both the machines.
 > I have started nodemanager in machine1 .
 > Iam able to run Adminserver and Managedserver1 in machine1(localhost)
 >
 > My question:
 > 1. I have to run the managedserver2 in the remote machine.
 > 2. Should i create a domain of the same name called mydomain in
 machine2(remote
 > machine)???
 > 3. Already nodemanager is running in machine1.............Should i run
 nodemanager
 > in machine2(remote machine) also ???
 > 4. What should be my configuration parameters (Java home, bea
 home,classpath,rootdirectory,arguments)
 > for managedserver2 ??? should these details be with respect to machine1 or
 machine2???
 >
 >
 > thanks&rgds,
 > girish

Similar Messages

Creating a directory on a remote machine using a UNC path

Hi all,
Is it possible to create a directory on a remote machine using a UNC path such as \\Server\Share\Directory?
If so, how would i go about this? (Sorry for the newbie question, that's exactly what I am!)
Thanks,
Rob

The tables on your pages are images. Not very convenient if the visitor wants to copy the information and use it.
Read this how to use tables :
http://www.wyodor.net/blog/archives/2010/01/entry_297.html
http://www.wyodor.net/blog/archives/2010/01/entry_298.html
Samples :
http://www.wyodor.net/mfi/Maaskant/Seabreeze.html
http://www.wyodor.net/mfi/Maaskant/Experiment.html
http://www.wyodor.net/mfi/roodhout/Prices.html
And here's a non-iWeb page with a sortable table :
http://www.wyodor.net/htmlegg/TallCard/TallAjax.html?pg=tablesorter
Or use a database on the server with MySQL and make tables with PHP :
http://www.google.com/search?q=create+html+table+with+data+from+mysql+database
Here's a very simple way to do it :
http://home.wyodor.net/w3school

When I try to connect to a remote machine using IPSecuritas, am getting the following error

When am trying to connect to remote machine using IPSecuritas, I am getting the following error and hence not able to establish connection. Imported the security policy and when I start IPSec, I get this error.
Info     APP IKE daemon started
Info     APP IPSec started
Error    IKE Foreground mode.
Info     IKE @(#)ipsec-tools CVS (http://ipsec-tools.sourceforge.net)
Info     IKE @(#)This product linked OpenSSL 0.9.7l 28 Sep 2006 (http://www.openssl.org/)
Info     IKE Reading configuration from "/Library/Application Support/Lobotomo Software/IPSecuritas/racoon.conf"
Info     IKE Resize address pool from 0 to 255
Error    IKE failed to bind to address 192.168.1.2[4500] (Address already in use).
Info     APP IKE daemon terminated
Error    IKE failed to bind to address 192.168.1.2[500] (Address already in use).
Error    IKE no address could be bound.
Info     APP IPSec terminated
Please help me in fixing this issue. Thanks in advance!!..
Thanks,
RV

Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

How to login to remote machine using SSH?

Hi,
I have a requirement where in I am required to connect to a remote machine using SSH and execute some commands, say a tail -100 on some file over there and pull back output data from the remote machine.
I know we can use sockets to connect to remote machines and Runtime.exec to execute external commands. But I am unable to tie together the two of these to achieve whatever I want to do.
Is it possible to somehow connect w/o using a custom server socket? The problem is that there is no concrete list of servers to connect to. It will be decided by the user. So I will not be able to install a server socket on each and every machine.
Any help would be most appreciated. Thanks a lot.
With regards,
Ganesh

Hi,
I am writing a java program that will try to use a SSH client to connect to a remote machine. I do not want to log into every single remote machine to moitor stuff over there.
My plan goes like this:
Have a web application that can connect to a DB for all information regarding remote servers to be monitored.
Based on user selection of a particular server, use data from the DB to connect to the particular remote server and pull in some data.
Hope I am clear enough now. Thanks a lot.
Ganesh

Not able to access database from a remote machine using SQL Server Management Studio

Hi,
I have a DB_BOX with SQL Server 2008 R2 installed. I can access the databases on the local machine using SQL Server Management Studio but it is not accessible from other machines, though the machines are in same domain.
I have remote enabled on SQL Server box, TCP enabled, firewall off. I checked with IP Address too, all SQL Server services are running.
The SQL Server log shows the message
The requested service has been stopped or disabled and is unavailable at this time. The connection has been closed.
I get the below message in SSMS from remote machine.
Details of error message are
===================================
Cannot connect to DB_BOX.
===================================
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=64&LinkId=20476
Server Name: DB_BOX
Error Number: 64
Severity: 20
State: 0
Program Location:
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
   at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
   at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
   at System.Data.SqlClient.TdsParserStateObject.ReadByte()
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

Sorry, missed the message from the errorlog in the original post. You shouldn't have included that big .Net dump that hid the important facts. :-)
My first Google attempt on that message (which I have never seen before) suggests that the TCP Enpoint is stopped, so try this:
ALTER ENDPOINT [TSQL Default TCP]
STATE=STARTED;
Erland Sommarskog, SQL Server MVP, [email protected]
This solves the problem. Thanks...

How to test oracle is up and running in remote machine using shell script

Hello,
I need help to write an linux script.
I have a java application server running on machine 192.168.5.20 and our oracle 10g standard 1.0.2 is running on machine 192.168.5.21.
I have found script to start oracle when computer is turned on.
But I cannot start my application server automatically since it depends on whether oracle is up and running or not on the remote machine.
Therefore, in case of power failure or maintenance, our client has to call us to start application server.
I would be grateful if someone can help me "How can I write script to check oracle is up and running in machine 192.168.5.21 from machine 192.168.5.20.
For your information, I have no oracle installed in application server. So tnsping won't work.
What I want is when power is back, application server script automatically and tesing for oracle server is up and running. If it is up, script will start application server.
Thanking you.

Hi,
It's not failover or experimental. My application server uses JBOSS and JBOSS needs database name to start up. My enviroment is LAN. My database is in different machine as I mentioned before. So In case of power failure, I need to start my application server (JBoss) manually, because I need to confirm that oracle is already running before start app server.
I want an automated script (when power is just on) to start my application server which will wait to check if the datbase server is up I will start application server.
The scripts given above It works if appserver and db server in the same machine (my development machine).
But when I test the script in my production applicaiton server, It shows sqlplus command not found (my app server does not have any oracle client installed).
About hostname yes My applicaiton server hostname is hostapp1 and dabase server hostname is hostdat1.
Do you think Is it possible to test the script without oracle client not installed. or It has to be done writing code like java program and test using jdbc connection.
Best regards.

How to execute a shell script which is present in remote machine using ODI

I have requirement of executing a batch (shell script) which is present in the remote machine.
i have an ODI agent in remote machine as well. I have created agent locally by using the remote machine IP and port.
I am able to test the agent successfully. But when i am executing the package using that agent it is failing with the following error
errorODI-1226: Step Execution of the Scenario REMOTE_DEMO version 001 fails after 1 attempt(s).
ODI-1241: Oracle Data Integrator tool execution fails.
Caused By: oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 ODI-1423: Warning connecting to Agent localagent: work repository WORKREP1 is not bound to the master
My Work Repository Name is : WORKREP1
Remote Work Repository Name is:WORKREP_LOCAL.
Could anyone please help me regarding this.
I can't download shell script and run it locally this needs to be run on that remote machine only.
Thanks
senthilkumar

This is the code.
1. we can declare types dynamically
2. Internal table dynamically
3. Select querry dynamically
just copy paste this code
Here is the code for your question
DATA:v_fieldname
TYPE fieldname,
l_PROG TYPE string,
v_mess TYPE string,
l_sid TYPE string,
wa_ddfields TYPE dntab.
DATA i_tab TYPE STANDARD TABLE OF string.
DATA:l_str TYPE string,
l_str1 TYPE string.
PARAMETERS matnr type marc-matnr.
end-of-SELECTION.
*build the subroutine pool
APPEND 'PROGRAM subpool.' TO i_tab.
APPEND `LOAD-OF-PROGRAM.` TO i_tab.
APPEND `DATA i_tab1 TYPE TABLE OF vbak.` TO i_tab.
APPEND `DATA l_rows TYPE i.` TO i_tab.
APPEND `select * into table i_tab1 from vbak.` To i_tab.
append 'DESCRIBE TABLE i_tab1 LINES l_rows.' to i_tab.
append 'Write : l_rows .' to i_tab.
GENERATE SUBROUTINE POOL i_tab NAME l_PROG
MESSAGE v_mess
SHORTDUMP-ID l_sid.
IF sy-subrc = 0.
PERFORM ('LOOP_AT_TAB') IN PROGRAM (l_PROG) IF FOUND.
ELSEIF sy-subrc = 4.
MESSAGE v_mess TYPE 'I'.
ELSEIF sy-subrc = 8.
MESSAGE l_sid TYPE 'I'.
ENDIF.
Edited by: vijay wankhade on Jan 1, 2009 5:34 PM
Edited by: vijay wankhade on Jan 1, 2009 5:34 PM

How to create a file on a remote machine using PrintStream

I want to create an HTML file on a remote machine connect via LAN the path is "\\vineet\akh\" akh is folder where I want to save the HTML file. Now in PrintStream i can give only a local file. Please help how to do it

.. You can do this in two ways!!
1) easy way
2) hard way
1) EASY WAY
.. as you know for write to a remote dir you must
a) have shared remote dir
b) have write permit on remote dir
if you have point a) and b) the way to follow it's simple as the other user explained to you!!
2) HARD WAY
the hard way is to use RMI (Remote Method Invokation)
i mean to create a service on a remote machine that give to you a remote method that make you write without share anything..!!!
check it out
http://tns-www.lcs.mit.edu/manuals/java-api-1.1beta2/guide/rmi/
i hope i'm been clear!!
SORRy My english!! (please)
Alessandro

How to excute a power shell script to remote machine using power shell script folder path and script name

Hi,
Let say, I have 3 parameters.
1. Script FolderPath (Remote path for e.g \\RD101\ScriptSharedFolder Here RD101 is one server)
2. Script Name(StopAllService.ps1)
3. Server Name (RD45)
I want to execute a powershell scritp in my local machine(Test1) and in that script I want to pass the above three parameters.Now I want to excute the StopAllService.ps1 script into RD45 server. But the script is available in RD101 machine.
So What I want to here How can we do this ? I have script name and script folder path and target execution server name.
Pls giude me or give me the script.
By
A Path Finder..
JoSwa
If a post answers your question, please click "Mark As Answer" on that post and "Mark as Helpful"
Best Online Journal

Hi,
You got 2 solutions for your problem:
1- If you have permission to run scripts in the remote computer without specifying your credential,
then, the first reply solve your problem.
2- If you have permission to run scripts in the remote computer
having to specify your credential, l then,
my solution solves your problem.
If the remote computer requires signed scripts only, you need signed script. Period. Or are you trying to break remote computer security?
If you need signed script, there's no psdrive that'll circumvent such requirement.
The problem is that the execution policy is set to "RemoteSigned". Using the URL explicitly tags that script as being from a remote source, and the policy blocks it. The PSDrive provides a local reference for the script. It does not
sign the script but the local drive reference may prevent it from being blocked for being from a remote source. I'll test that later.
Script signing is not and should never be considered a security measure. It is easily circumvented by running the script using powershell.exe, and using the -ExecutionPolicy parameter to override whatever the local execution policy setting is.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

How to get all AD User accounts, associated with any application/MSA/Batch Job running in a Local or Remote machine using Script (PowerShell)

Dear Scripting Guys,
I am working in an AD migration project (Migration from old legacy AD domains to single AD domain) and in the transition phase. Our infrastructure contains lots
of Users, Servers and Workstations. Authentication is being done through AD only. Many UNIX and LINUX based box are being authenticated through AD bridge to AD.
We have lot of applications in our environment. Many applications are configured to use Managed Service Accounts. Many Workstations and servers are running batch
jobs with AD user credentials. Many applications are using AD user accounts to carry out their processes.
We need to find out all those AD Users, which are configured as MSA, Which are configured for batch jobs and which are being used for different applications on
our network (Need to find out for every machine on network).
These identified AD Users will be migrated to the new Domain with top priority. I get stuck with this requirement and your support will be deeply appreciated.
I hope a well designed PS script can achieve this.
Thanks in advance...
Thanks & Regards Bedanta S Mishra

Hey Satyajit,
Thank you for your valuable reply. It is really a great notion to enable account logon audit and collect those events for the analysis. But you know it is also a tedious job when thousand of Users come in to picture. You can imagine how complex it will be
for this analysis, where more than 200000 users getting logged in through AD. It is the fact that when a batch / MS or an application uses a Domain Users credential with successful process, automatically a successful logon event will be triggered in associated
DC. But there are also too many users which are not part of these accounts like MSA/Batch jobs or not linked to any application. In that case we have to get through unwanted events.
Recently jrv, provided me a beautiful script to find out all MSA from a machine or from a list of machines in an AD environment. (Covers MSA part.)
$Report= 'Audit_Report.html'
$Computers= Get-ADComputer -Filter 'Enabled -eq $True' | Select -Expand Name
$head=@'
<title>Non-Standard Service Accounts</title>
<style>
BODY{background-color :#FFFFF}
TABLE{Border-width:thin;border-style: solid;border-color:Black;border-collapse: collapse;}
TH{border-width: 1px;padding: 2px;border-style: solid;border-color: black;background-color: ThreeDShadow}
TD{border-width: 1px;padding: 2px;border-style: solid;border-color: black;background-color: Transparent}
</style>
$sections=@()
foreach($computer in $Computers){
$sections+=Get-WmiObject -ComputerName $Computer -class Win32_Service -ErrorAction SilentlyContinue |
Select-Object -Property StartName,Name,DisplayName |
ConvertTo-Html -PreContent "<H2>Non-Standard Service Accounts on '$Computer'</H2>" -Fragment
$body=$sections | out-string
ConvertTo-Html -Body $body -Head $head | Out-File $report
Invoke-Item $report
A script can be designed to get all scheduled back ground batch jobs in a machine, from which the author / the Owner of that scheduled job can be extracted. like below one...
Function Get-ScheduledTasks
Param
[Alias("Computer","ComputerName")]
[Parameter(Position=1,ValuefromPipeline=$true,ValuefromPipelineByPropertyName=$true)]
[string[]]$Name = $env:COMPUTERNAME
[switch]$RootOnly = $false
Begin
$tasks = @()
$schedule = New-Object -ComObject "Schedule.Service"
Process
Function Get-Tasks
Param($path)
$out = @()
$schedule.GetFolder($path).GetTasks(0) | % {
$xml = [xml]$_.xml
$out += New-Object psobject -Property @{
"ComputerName" = $Computer
"Name" = $_.Name
"Path" = $_.Path
"LastRunTime" = $_.LastRunTime
"NextRunTime" = $_.NextRunTime
"Actions" = ($xml.Task.Actions.Exec | % { "$($_.Command) $($_.Arguments)" }) -join "`n"
"Triggers" = $(If($xml.task.triggers){ForEach($task in ($xml.task.triggers | gm | Where{$_.membertype -eq "Property"})){$xml.task.triggers.$($task.name)}})
"Enabled" = $xml.task.settings.enabled
"Author" = $xml.task.principals.Principal.UserID
"Description" = $xml.task.registrationInfo.Description
"LastTaskResult" = $_.LastTaskResult
"RunAs" = $xml.task.principals.principal.userid
If(!$RootOnly)
$schedule.GetFolder($path).GetFolders(0) | % {
$out += get-Tasks($_.Path)
$out
ForEach($Computer in $Name)
If(Test-Connection $computer -count 1 -quiet)
$schedule.connect($Computer)
$tasks += Get-Tasks "\"
Else
Write-Error "Cannot connect to $Computer. Please check it's network connectivity."
Break
$tasks
End
[System.Runtime.Interopservices.Marshal]::ReleaseComObject($schedule) | Out-Null
Remove-Variable schedule
Get-ScheduledTasks -RootOnly | Format-Table -Wrap -Autosize -Property RunAs,ComputerName,Actions
So I think, can a PS script be designed to get the report of all running applications which use domain accounts for their authentication to carry out their process. So from that result we can filter out the AD accounts being used for those
applications. After that these three individual modules can be compacted in to a single script to provide the desired output as per the requirement in a single report.
Thanks & Regards Bedanta S Mishra

How do you setup a remote project with Netbeans 6.1 and IDM 8?

I have been using Netbeans with IDM 7.1 fine, but have now upgraded to IDM 8 and want to use the new Netbeans plugin. However there is no ide-bundle.zip with IDM 8. If you try to connect to IDM 8 using the previous bundle from 7.1 you get a compatability error. Anyone able to give help on this?

I have setup a remote project using the other setting of configuring the repository yourself. I couldn't use the remote method as it requires this file from your localhost file store and as I am using a different machine to run netbeans this wouldn't work. The other method allows you to put in connection information.
I am not sure of the point of the remote method as it doesn't allow what the name suggests.

How to read file from remote machine

Hello,
Hi, i would like to know how to read text file from remote machine using java source code, any code ?
Thanks very much;
Best regards
Kim

On the server, perform the following steps:
Parse the request and determine the file to serve
Open a FileInputStream to the appropriate file
Obtain a reference to the Servlet OutputStream
Pipe the bytes from the file to the output stream
Flush and close the streamYou might want to call HttpServletResponse.setContentType("application/octet") to indicate to the browser that a file download will be occurring. Do so before getting the reference to the Servlet's OutputStream.
- Saish

How to make OTM scripts to run on remote machines

Hi,
I came across lot of posts which tells how to configure OTM to connect to remote machines.
Some how i dont understand when they say stop the OATS service and configure it manually
Also to use the password for authentication manager.
What i really want to know is step by step for a layman to set up OTM to run scripts on a remote desktop and on the local with the execution being displayed (not suppressed)
How do we configure that?
Any help is deeply appreciated!! my test cases are just stuck inprogress status
Thanks
Radhika

Hi Radhika,
For running Scripts from either the server or the remote machine using OTM you need to run the Agent Manager service as a console not the OATS service. For that you need to stop that service--> set the startup type as manual--> the run the ' C:\OracleATS\agentmanager\bin\AgentManagerService.exe –c AgentManagerService.conf ' command in the CMD to run this service as a console. Because this agent manager service is for OLT to communicate with its agents and works fine even if it is set to automatic or manual and started normally. Hope this helps.....
Regards,
Charles Kingsly

Install SQL Server 2012 SP1 on a Windows Server 2012 R2 Failover Cluster - hangs at "Running discovery on remote machine" on VMWare VSphere 5.5 Update 1

Hi,I'm trying to install SQL Server 2012 SP1 on the first node of a Windows Server 2012 R2 failover cluster.The install hangs whilst displaying the "Please wait while Microsoft SQL Server 2012 Servce
Pack 1 Setup processes the current operation." message.The detail.txt log file shows as follows:(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached PID (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider
: NormalizePid is normalizing input pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached
PID (01) 2014-07-17 15:36:35 Slp: Completed Action: FinalCalculateSettings, returned True (01) 2014-07-17 15:36:35 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True (01) 2014-07-17 15:36:35 Slp: ---------------------------------------------------------------------- (01) 2014-07-17 15:36:35 Slp: Running Action: RunRemoteDiscoveryAction (01) 2014-07-17 15:36:36 Slp: Running discovery on local machine (01) 2014-07-17 15:36:36 Slp: Discovery on local machine is complete (01) 2014-07-17
15:36:36 Slp: Running discovery on remote machine: XXX-XXX-01After about 4 hours and 10 minutes, the step seems to time out and move on, however it doesn't seem to have discovered what it needs to and the setup subsuently fails

Hi,
Sorry Information you provided did not helped can you post content of both summary file and details,txt file on shared location for analysis.
Can you download Service pack again and try once more
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Steps to setup and configure Node Manager on local and remote machine

Hello,
I am using WLS 10.3 on Windows.
I have two machines, One cluster and two managed servers (one on each machine) created under a domain. I have used configuration wizard to create the domain.
I have gone through documents on Node Manager and found what to configure. But I have not found when to configure. In other words I want to know what is the sequence of steps if I have to set Node Manager on my local machine (in which domain exists) and on remote machine.
Please let me know the sequence of steps I need to follow to set and configure the Node Manager on local and remote machine. I want to use Java Node Manager (not the Script node manager).
Thanks,
Sanjay

Hello,
Ok, let me tell you what I have done till now.
1) Installed WebLogic 10.3 on machine A (local machine, on which I have created domain and my Admin Server is running. Also Managed Server 1 is created on this machine).
2) Installed WebLogic 10.3 on machine B (remote machine, on which Managed Server 2 will be created).
3) On machine A I used the configuration wizard and create a domain. While creating the domain I did the following:
i) Created two managed servers.
ii) Created a cluster
iii) Assigned Servers to cluster.
iv) Created two machines.
v) Assigned servers to machines (Admin Server and MS_1 to machine A and MS_2 to machine B).
4) Sarted Admin Server.
5) On the Admin Console I made some configurations for the Node Manager on Machines -> Machine A -> Node Manager. Assigned the values:
i) Type (SSL)
ii) Listen Address (IP_Address of machine A)
iii) Listen Port (5556)
6) Similarly did for Machine B.
So till now phsically the managed server (MS_2) directory and configuration is not there on Machine B (its only configured on machine A because I created the domain on Machine A).
Now I want install/configure/setup NM on both the machines. Start my both the managed servers using Admin Console (which will use the node managers).
What are the sequence of steps I need to follow my task?
Any help and suggestions are welcome with warm regards.
Thanks,
Sanjay

Cluster setup in remote machines using weblogic8.1??

Similar Messages

Maybe you are looking for