CM 4.1 integration to ADAM

Can anyone tell me whether it is possible to integrate CallManager to Active Directory Application Mode?

Would ADAM be supported with CCM 5.0 or does the same apply?
R
Glyn

Similar Messages

A fresh new series of Partner Orientation Webinars - don't forget to register!

September reveals the topics of the Partner Orientation Webinar series we've prepared for you till the end of the year!
Join our experienced BC Partner Greg Marcel from 2140 Interactive on September 18th for a business session, where you will learn about making the most of a one person shop.
Wed, September 18th: Keeping It Small But Making It Big with Greg Marcel from 2140 Interactive
Australian/EU session --- 5:00PM Australia (Sydney) / 8:00AM Europe (London)
US/EU session --- 9:00AM United States (San Francisco) / 5:00PM Europe (London)
To help you put your learning into practice, webinar participants will be receive a 15% discount on their next website. (*Some conditions apply, see below)
Wed, October 23th: Muse & BC: A dynamic duo with Karim Ardalan from AID+BC
Australian/EU session --- 6:00PM Australia (Sydney) / 8:00AM Europe (London)
US/EU session --- 9:00AM United States (San Francisco) / 5:00PM Europe (London)
The series continues in November and December with 2 special presentations where you will see the future of BC in action. For these 2 sessions we have a special surprise, as we are preparing some very cool features with Business Catalyst. Registrations are now open for those instances as well, and we will be sending out more details and a reminder as we move closer to the presentation dates.
Wed, November 13th: Surprise Session
Australian/EU session --- 7:00PM Australia (Sydney) / 8:00AM Europe (London)
US/EU session --- 9:00AM United States (San Francisco) / 5:00PM Europe (London)
Wed, December 11th: Surprise Session
Australian/EU session --- 7:00PM Australia (Sydney) / 8:00AM Europe (London)
US/EU session --- 9:00AM United States (San Francisco) / 5:00PM Europe (London)
If you could not join us live, you can click the links below to access recordings of our past webinars:
Adding value to clients by upselling products & services - with Brendon O'Sullivan from Bosweb
Learn how BC Gurus leverages Web Apps to power their popular Business Catalyst community website - with Brent Weaver from BC Gurus
Online Marketing - with Brett Stockley from PrettyPollution
Developing an Effective Sales Strategy for Your Web Agency - with Tim Gentle from Design Experts
Dreamweaver & Business Catalyst integration - with Adam Broadway (Download presentation deck)
Business Catalyst integration with Muse - with Daniele Beaumont and Chris Kellet
If you have any questions or suggestions please do not hesitate to send them over to [email protected]. We will be happy to answer all your inquiries.
*15% discount coupon applies for new site upgrades on any yearly/biyearly desired plan. Coupon validity: 31-Dec-2013, only available for the webinars’ attendees.

The Melodyne plugin is known for messing with Logic.
Check and see if they have an update for it.

Don't miss out on our exciting upcoming Partner webinars – Important Update

Thanks to all of you who have registered to our webinars so far.
We need to announce a last minute update regarding the webinar scheduled for this Wednesday, May 15th - Brendon O'Sullivan’s session on adding value to clients by upselling products & services had to be rescheduled.
The topic and presenter for this webinar session has been replaced with our experienced BC Partner Tim Gentle from Design Experts on Wed, May 15th for a business session, where you will learn how to Develop an Effective Sales Strategy for Your Web Agency.
Wed, May 15th: Developing an Effective Sales Strategy for Your Web Agency with Tim Gentle from Design Experts
Register for these sessions by clicking on the links below:
Australian/EU session (17.00 EST / 09.00 CEST)
US/EU session (09.00 PDT / 18.00 CEST)
To make sure you can put your learning into practice, webinar participants will be receiving a 15% discount on their next website. (Some conditions for the coupon code apply*)
The series continues in June and July with presentations from two of our trusted Partners, Brett Stockley and Brent Weaver, who will teach you how to grow your business into the future. Registrations are now open for those instances as well, and we will be sending out a reminder as we move closer to the presentation dates.
Wed, June 12th: Online Marketing with Brett Stockley from PrettyPollution
Register for these sessions by clicking on the links below:
Australian/EU session (17.00 EST / 09.00 CEST)
US/EU session (09.00 PDT / 18.00 CEST)
Wed, July 10th: Learn how BC Gurus leverages Web Apps to power their popular Business Catalyst community website with Brent Weaver from BC Gurus
Australian/EU session (17.00 EST / 09.00 CEST)
US/EU session (09.00 PDT / 18.00 CEST)
If you could not join us live, or would like to review some parts of the past webinars, you can click on the title and access the recording of past webinars here:
Dreamweaver & Business Catalyst integration - with Adam Broadway: http://my.adobeconnect.com/p9i3707tw4w/
Business Catalyst integration with Muse - with Daniele Beaumont and Chris Kellet: http://my.adobeconnect.com/p66zikge03g/
We would love to hear your feedback on this webinar series and as always suggestions are welcomed at [email protected]
*the 15% discount coupon applies for new site upgrades on any yearly/biyearly desired plan. Coupon validity: 31-Jul-2013, only available for the webinars’ attendees.
See you there!
The Adobe Business Catalyst Team

Hi ZypKode, I couldn't help but reply to your post: Back before Win 95 I was using Digigram's Xtrack audio editor. It didn't run on Win 3.x because that OS wasn't capable enough. Win 95 just managed that when it came out. I looked at Cool Edit Pro around that time, and it was Ok. But for my work which was a lot of interview recording/editing plus radio programme recording in 4 track (2 tracks for voicing, 1 stereo track for music) Xtrack was way out ahead, in terms of multitrack capability but especially speed of work. Even the waveform display had several options apart from the standard full-wave that every editor, even today uses (Audacity offers a dB display which is better, but nothing like the old Xtrack offering). The option I always used was a half-wave display with just the outline, and it was logarithmic rather than linear. Result was that, without resorting to zooming in and out, you could see the noise floor, see the detail of the person's breath and lip-smack. With a little experience you could do most voice edits just by looking without even listening – which, of course, you did afterward, just to make sure :-) Producers used to look at me as if I was a magician when doing the edits like that. If Audition one day offered that as a waveform option, they could put it forward as a revolutionary new experience, since Digigram, better known for their high end audio hardware, dropped Xtrack a few years ago, being too small a company to compete with the big players.

Oracle Access Manager, ADAM & UCM integration? Help please..

I`m currently investigating the potential of using Oracle Access Manager (OAM) as a tool that allows connections to multiple Active Directory(AD) or ADAM servers providing a single point to author and manage users with a good easy to use GUI.
The UCM will connect directly to OAM and authenticate users connecting from AD accounts..
At the moment we use Quest software to manage users, but the cost for setting up users is £15/user where as OAM is only £3. I believe..
Right the questions I have :)
1. Has any one set this type of environment up?
2. ls OAM stand alone or will I need additional software to set it up?
Reading the installation guide it says I need the following:
# Oracle Internet Directory 10g (10.1.4.0.1)
# Microsoft Active Directory
# Oracle Virtual Directory Server 10.1.4.0.1
# Oracle Virtual Directory Manager 10.1.4.0.1
# Oracle Virtual Directory Patch 10.1.4.0.1 (P5667977)
# Stand-alone Oracle HTTP Server 2.x (This needs to be preinstalled in your environment. You can download the OHS 2.x standalone from the Oracle SOA Suite 10g Companion (10.1.3.1.0) release from here.)
3. Can I use IIS instead of Oracle HTTP Server?
4. Can I install OAM on 1 server or do I need multiple servers, I`v been looking at the diagrams and reading through the guides I`m getting a little confused with Identity and Access server?

Hi,
Have you got information reg UCM & OAM integration?
Could you please help me with the integration guide?
Regards,
Ashish

Oracle Access Manager, ADAM & Oracle ECM - UCM integration?

I`m currently investigating the potential of using Oracle Access Manager (OAM) as a tool that allows connections to multiple Active Directory(AD) or ADAM servers providing a single point to author and manage users with a good easy to use GUI.
The UCM will connect directly to OAM and authenticate users connecting from AD accounts..
At the moment we use Quest software to manage users, but the cost for setting up users is £15/user where as OAM is only £3. I believe..
Right the questions I have :)
1. Has any one set this type of environment up?
2. ls OAM stand alone or will I need additional software to set it up?
Reading the installation guide it says I need the following:
# Oracle Internet Directory 10g (10.1.4.0.1)
# Microsoft Active Directory
# Oracle Virtual Directory Server 10.1.4.0.1
# Oracle Virtual Directory Manager 10.1.4.0.1
# Oracle Virtual Directory Patch 10.1.4.0.1 (P5667977)
# Stand-alone Oracle HTTP Server 2.x (This needs to be preinstalled in your environment. You can download the OHS 2.x standalone from the Oracle SOA Suite 10g Companion (10.1.3.1.0) release from here.)
3. Can I use IIS instead of Oracle HTTP Server?
4. Can I install OAM on 1 server or do I need multiple servers, I`v been looking at the diagrams and reading through the guides I`m getting a little confused with Identity and Access server?

The OAM identity system (identity server and WebPass) sound like a good fit for what you want to do. One constraint is that if you want to create/manage users in different directory instances via a single OAM identity system installation, you would also need OVD.
And yes you definitely can have IIS host the WebPass - OHS, OID etc are not required.
-Vinod

Changing LDAP System from AD to ADAM in CUCM 7.1.5

Hello Guys,
First time poster here, so be gentle...
We have a query regarding LDAP Synchronisation in CUCM 7.1.5.
A brief background :
Our CUCM environment has expanded since we first put it in a couple of years ago. We originally had, and continue to have, a single LDAP System configured on CUCM for only one of our AD forests.
We have a multi-forest AD environment, with us rolling out more and more CUCM enabled sites from our differing AD forests.
1 x CUCM 7.1.5 Pub (+ 2 x Subs)
1 x Presence
1 x MP
1 x UCCX
1 x Unity Connection
3 x Unity
We are building an AD LDS (ADAM) server to enable our multi-forest integration and LDAP synchronisation from CUCM. This is built based of this Cisco doco :
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080b2b103.shtml
Our question :
Changing the CUCM LDAP System (and thus also changing the LDAP Directory and Authentication)
From : "Microsoft Active Directory"
To : "Microsoft Acive Directory Application Mode" (ADAM)
AND : After running the first CUCM sync with the new ADAM server.
What impact will this have on the existing user accounts in CUCM (in terms of their Associated Devices and their Permissions Groups and Roles)?
Will they be overwritten and thus the above fields be blank? Leaving us having to manually add all that back in to our existing user base.
Or, (which we feel is most likely), will there be duplicate accounts created in CUCM?
The reason we feel there will be duplicates is due to the nature of multi-forest deployments and the issue of having the same usernames in two or more forests. All authentication requests must be performed using their User Principal Name (UPN), such as [email protected], rather than the standard way of just using your userid : jdoe
Sorry for the long winded query.
Appreciate any thoughts/opinions on this.
Cheers,
Rick.

Rick,
I haven't done this myself, so keep that in mind. As you say, be gentle.
Putting ADAM aside for the moment, in an LDAP sync configuration when you establish a sync agreement the CUCM does the following:
1. All user objects in the CUCM db are marked inactive
2. CUCM begins sync'ng with LDAP
3. For each user object learned from LDAP: The LDAP attribute chosen to map to the user ID in CUCM is compared to existing CUCM user objects.
- If a match is found, the account is activated
- attributes for first name, last name, telephoneNumber, etc. are then overwritten with the LDAP values (based on attribute mappings)
4. After the sync completes, any CUCM user object that did not have a LDAP object with the same user ID are still marked inactive. These objects will be purged during the next clean up interval
To give an example, I had a project where the customer was doing an upgrade from 4.1 to 7.1(3). As part of the upgrade, user objects were moved over to CUCM 7.1(3). Then we enabled LDAP sync. User objects were not deleted, nor were there duplicates. Configurations such as device associations were unaffected. The only thing we needed to do was check the CUCM user DB against LDAP user objects (running scripts against both) to find any mismatches between sAMAccountName and the CUCM user ID.
Assuming the sync process and behavior for activating/deactivating accounts is the same with an ADAM integration, then I wouldn't expect you to have an issue.
HTH.
Regards,
Bill

Let's see how this ends.. Verizon's integrity. This could affect YOU. **Important**

Hi all, I'm sorry to have to make my first post about such a subject, but I am a fairly new customer to Verizon and I've uncovered something pretty ugly about the company, I guess we'll see if they make it right or not.
The situation:
I had my iPhone stolen on the 7th of Feb 2013 (a week or so ago). I wasn't too worried about it, because I'd called to get insurance added shortly after receiving my iPhone 5.
I completed the necessary steps (find myy iPhone app, no luck there so I erased my iphone remotely, to protect my data, reported the theft to police)
Then, I called Verizon to file an insurance claim.. this is where I come to a screeching halt.
The rep I spoke to, tells me that my phone is not insured. This can't be right.. I definitely insured it. I asked the rep to double check. Nope, no insurance. Then I asked them why the insurance wasn't added, and they were able to find the notes from the call I had, when I insured the phone. Problem solved.
After putting me on hold for a while, the rep comes back and tells me "although the phone is technically uninsured, Verizon have agreed to give you a new iphone 5, at a discounted price, so you will pay the same cost that you would have paid with insurance. The cost of the deductible." - please note, when I quote the rep, it may not be verbatim.
So that's a relief! Great..
The rep puts me on hold again while she goes to order my new phone for me.
After some time she comes back again and tells me "I'm so sorry but the iphone 5 is on back order, so I'm not able to put the order in for you. You would be better off going to your local Verizon store, where they will be able to give you the phone at the promised price"
I was a little worried that the store would not be able to, but when I asked about that, the rep assured me "Don't worry, they will be able to see the notes. I am notating your account that you will be getting your new iPhone 5 at the same price of the deductible."
It's not easy for me to get time to go out to the Verizon store, but I decide to make the trip, it seems worthwhile, to get my replacement phone on the spot.
A couple of days after the phone call with the rep, I found the time to go to the store, but when I got there, they seemed confused and after quite a bit of time, finally refused to give me the iphone 5, telling me that it's not possible and that I need to order it through customer service.
So I call customer service again.
This time I speak to another rep, who tells me that they cannot in fact give me the iphone at the discounted rate. She started from scratch even though I asked her to look at the notes so we didn't have to go through everything again.
She starts to question the other rep's decision, saying that the other rep was in a different part of the company, and "maybe that's how they do things there". I tried to explain to her that while they may have different departments, I expect them to all be "Verizon". As far as the customer is concerned, every part of Verizon should represent the company as a whole, not as this branch of customer service versus another.
By this time I'd become increasingly frustrated, having been led in circles, told something different by each person I spoke with, and having wasted a substantial amount of time on the phone and driving to the store, talking to the people at the store, back on the phone etc. so I asked to speak to a manager about the issue to try to get it resolved once and for all.
The manager got on the phone and from the start seemed very confrontational. Maybe I got him on a bad day, or maybe he just loved to fight.. either way, things did not go smoothly.
He started out by trying to twist the blame of not having insurance on the phone, back around onto me even though Verizon had previously accepted responsibility.
I asked him how he could justify this being my fault, and his answer blew me away.. "well, you should have looked to make sure the insurance had in fact been activated" So disgusted I was at this point, by the sheer lack of professionalism. But still I kept my composure, and calmly asked him if Verizon's policy was to have it's customers check to make sure they did their job.
He basically latched onto that idea, that it was my responsibility to check it and make sure the insurance had been applied. I could not believe it.. aghast, I just told him that it was irrelevant anyway, because Verizon had already accepted the responsibility and promised me a replacement at the same cost as a deductible.
To that, he replied: "Well, I'm not going to honor that. Our rep could offer you a million dollars. Do you expect me to honor that too?"
Think about this for a second.. Clearly, a customer service representative offering to replace a phone because of an error made by the company she represents is not the same as a rep offering me a million dollars. This guy was just completely adamant on helping me, and it seemed to me it was more about "winning the argument" than anything else for him.
I knew I would not get anywhere with him, so I asked him to please escalate the case. His reply to that was: "I'm as high as you're ever going to get, speaking to Verizon. I'm it.. it doesn't get escalated higher than me. My decision is final"
I asked one more time, what what the official reason is for not honoring the other reps promise, and how he could justify not doing it even though it had been offered to me. (Now, I'd like to add, this promise was not something I'd imagined or made up. It was actually written in the notes, that I had been offered the replacement for the same cost as a deductible. I confirmed this by going on chat to speak with a sales rep later that day, and I had the rep go into my account and confirm that this promise was made. I also had them email me the chat transcript, so I had something in writing.. I have evidence of this promise.)
His answer was simply: "That offer is no longer on the table" - That part is verbatim. I remember clearly those were his exact words. That offer is no longer on the table. I asked for him to clarify, but he just repeated, "That offer is no longer on the table", followed by "..and there's nothing you can do about it."
In all my life, I have never seen a large company like Verizon behave in this way. It has been extremely the most stressful dealing I have ever endured with a company of this scale.
Now, a week later I still have no resolution. I'm currently without a phone, which is a very big deal for me, because I have two young daughters in Australia, who have my number memorized as an emergency contact and they call me and speak to me often. I miss them a lot, and after having not seen them for over a year, speaking to them on a daily basis has become something that's very important to me, and to my girls.
I'm hoping and praying someone from Verizon will read this, and help me, or maybe some of you on the forum may have some idea on what to do at this point.
Thank you so much for reading, thank you for your time, please comment, or let me know if you have any advice for me. I'll be posting this on several other sites as well.
Along with hoping to get some help with my situation, I'm also hoping others who read this will be cautious about trusting the word of your Verizon rep, and please get everything in writing, (although even if I had my offer in writing, I have no idea how it would help.)
I plan also to open a case with Consumer Affairs, as well get my story out there on a large scale via certain media.
Thanks again
Aloha

Verizon staff, if you're reading this, I hope that you will see it as an opportunity to show other customers and potential customers that this type of thing is not your usual way of treating customers.
I hope that you see it as a chance to prove Verizon's integrity.
I will be updating this thread, to let people know how the situation is handled from this point on.
I have not yet posted this in any other forum, and I do not plan to reach out to a wider audience yet. If all goes well, it will stop here.. Please give this story a happy ending.
Thanks.

T530 Lenovo Integrated Camera not working, Lenovo Camera Settings does not Display

Hello, I have a new T530 with Windows 8 OS. I am having trouble using the integrated camera. It functions neither in the Windows camera app nor in Skype. In both cases I get a picture with a gray background and a camera with a line through it. In Device manager, the camera does appear, is enabled, and the drivers are up to date.
After looking through other threads, I tried checking whether the camera was plugged in and indeed it was. When using Skype and I set the camera to on (Skype did detect the camera), I still got the gray no camera image, but the green light on the camera itself turned on.
I also tried using Fn+F6 to check settings. Lenovo settings opens, but the when I click the camera settings Icon, the screen loads a blank page that says "Camera" in the top right and has a back button (left pointing arrow) in the top left hand corner. The back button does not seem to work and I must change the window to something else in order to exit/close settings.
I tried manually installing both camera drivers and "power management" ("energy management"?) drivers. Neither of this solved either of these issues.
Please help me to resolve this problem. Thank you.

Hi, euterpenc
I would make sure that the BIOS is up to date in the system. The current BIOS for your system is 2.07 and can be found here. Also, I would ensure that the chipset drivers are up to date, and those can be found here.
Hope it helps, and let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

X220 Integrated Webcam

Hi all,
I have weird issue with my Lenovo x220 integrated webcam.
Previously my integrated webcam used to appear as a device under the Printers and Devices, and this also used to get presented through to a windows 7 VM which I run on the x220 tablet using VMware Workstation.
Somewhere down the line (I am not sure exactly when) after numerous system updates etc, the integrated webcam stop appearing under Printers and Devices...and no longer gets passed through to the VM.
The webcam itself works fine on the host and is visible under device manager and can be configured using Fn + F6.
Not sure what made it stop working with vmware workstation, but any insite will be much appreciated.
Cheers
KK

Hi, Maryd1621
What exactly happens when you attempt to use the integrated camera? Which programs have you tried using the camera with? As for the driver, click here for the camera driver for Windows 7, Vista, and XP. If you are using Windows 8, there is not an updated driver on the website, but the default driver built in to the machine should work fine.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Integration with SAP order fulfillment?

Hi, forgive me in advance for my ignorance and high-level questions in this post. Though I am a good programmer, I have never used SAP before and am trying to learn as much as I can as quickly as I can.
I am the founder and director of technology of a small nonprofit, www.sirum.org, that uses an online platform to streamline medicine donation from manufacturers and hospitals to community clinics that serve the uninsured. We recently had a big break through with a number of large manufacturers that they would transition their current proprietary donation software over to us in order for us to develop a cross-manufacturing donation solution so clinics didn't have to deal with each company individually.
The catch is that I believe most if not all of these companies wanted backend integration of our service with their current SAP order fulfillment systems. The webservice SIRUM is creating will have a clinic login to our site, order the medicine they need, tell each manufacturer how much of their drugs were ordered by whom, and then have a delivery request along with the clinics address sent to their distribution center.
I haven't discussed the integration component with them in anymore detail yet, but since I have never integrated a webservice with SAP - let alone even used SAP - before I wanted to get a sense of what a multiple manufacturer webservice integration would entail. Namely,
1) would we just create a WSDL with operations that tell the manufacturer how much was ordered?
2) Since we want the manufacturer to have little or no customization work on their end is there a way to also provide them an SAP program that then take information provided by our webservice and turns it into their ordering syntax.
3) Would this latter piece depend on what modules of SAP each manufacturer has installed, or does all order fulfillment use the same SAP module/solution?
4) Would a solution involve a lot of customization from manufacturer to manufacturer? Is there a way to minimize the amount of customization without sacrificing integration?
5) Do you guys/ladies have any good ideas of any features that could be added to the base functionality (sending an order of medicine from a clinic to a manufacturer and its distribution center for fulfillment)
Thanks in advance for your time,
Adam

If I'm understand your question correctly, you want to send the order you receive on your web to the manufacturer. Then manufacturer will create a sales order and delivery order on their side and deliver the good to the clinic.
In this case,
1,2) It would be better for you to send the order to them instead of creating the wsdl for them to call. There is a standard format EDI for sales order that SAP use to interface with legacy system. You cna generate the data in this format and send to each manufacturer so they can configure the system on their side.
3) The module is called SAP order fullfillment or SAP order-to-cash or SAP SD (Sales & distribution). It means the same thing just some people call it differnetly. SAP SD is the common one.
4) Surely there will be some effort for each manufacture to integrate their system with you. However, If you use the standard EDI, the effort would be minimal for the manufaturer that already implement this with other partner.
5) you can pass along the address in sales order. If the manufacturer system implemented SAP SD, they should be able to create sales order, delivery order and invoice from their side.
Regards,
Chaiphon

[Solved] Gnome Integration Missing In Chromium 35

Hello all,
With the newly released Chromium 35, it seems that Gnome integration is missing.
Specifically, it does not recognize gnome in the Gnome extensions site via the plugin that was available in version 34.
Anything can be done about it?
Thanks, Adam.
http://i.imgur.com/hj7RKqP.png
http://i.imgur.com/R1OQMor.png
Moderator Edit [ewaller] Converted over sized imaged to url links
* EDIT *
Issue due to Chrome 35 no longer supporting the NPAPI plugin architecture.
Last edited by adam777 (2014-05-21 12:58:32)

decryptedepsilon wrote:Also, if anyone is using Hangouts extension, do they experience gnome-shell crashes on starting Hangouts? I have them. Also happens with Cinnamon so it must be gnome-shell related. Chromium 35 added something which doesn't play well with gnome-shell yet.
I use the hangouts extension (a lot!) and google-chrome beta which is currently on version 36+ but have no crashes. Nor did I have any crashes for the months when google-chrome beta was on any of the many 35 versions. [Actually, I had a few gnome-shell crashes over a few days when gnome-shell first moved to version 3.12+ but discovered it due to the skype extension which I removed and have not see one since].

Hardware sizing for HANA R Integration

Hi ,
I'm researching about HANA R Integration . I see som SCN docs and I understand pre-requisites for this feature .
Guide: Setting up HANA integration with R for use with SAP Predictive Analysis
etc.
I can't set up R serve on HANA host , so I need one more SLES host for this feature .
But I can't find any sizing information for this host .
- Does anyone have any sizing information about R-Serve linux host ? or it is depend on SLES ?
Regards,
JT

In addition to the link Rakesh posted, you can also flip through this ppt document, it has good information on ERP sizing:
http://www.oracle.com/technology/products/applications/sizing/Sizing_EBS_LongVersion.ppt
--Adams

IdM GRC integration

Hi,
I am searching options how to integrate SAP GRC with Microsoft ADAM through SAP IdM, Purpose is GRC will receive a User data and that will be provisioned into ADAM via SAP IdM. As IdM is a good tool used in Identity management will this serve the purpose of Integrator between SAP GRC and Microsoft ADAM. and how to do that
I would like to know pros and cons in this case.
Thanks,
Regards,
Swapnil Lakhe

Hi Richard,
As i said before, requirment at my architecture is Provision HR data from HR system to ADAM, but GRC will be used for sorting all SoD conflicts and other security porcess. So ADAM will be used as source of User master repository where all data will be stoared in tree format. For this purpose i am finding way to Integrate ADAM and GRC, I can read data from GRC after configuring connecter in GRC, but i am not able to write data into ADAM through GRC. This is my concern. I want to get this successful.
I am looking SAP IdM as integrator, as i read it can talk with both GRC and ADAM. So architecture i am thinking is GRC <> IdM <> ADAM. I think i can integrate GRC and IdM through Web services mentioned in GRC conf guide, but not able to find how to integrate IdM-LDAP( Microsoft ADAM), i.e. Integration of Identity store to Ms ADAM. I just want to find how this option work with its pros and cons.
Some facts i came accross this can be achived by running standard templates in IdM through job wizard. option for SUN ONE is available with SAP IdM, but my worries more about Microsoft ADAM.
Thanks for your help.
Regards,
Swapnil Lakhe

IDM-MOSS Integration

Has anyone tried integrating IDM with MOSS( Microsoft Office SharePoint Server ). I'm looking for docuements that will talk about how we provision/deprovision to MOSS, from IDM 7.1.

For the most part, I think you can just provision to AD/ADAM and assign the necessary group memberships. I'd look to examine what MOSS requires and then break it down to workflow steps.
Cheers,
Matt

Fail to install Application Integration on Win2000 SP2

When trying to install "WebLogic Application Integration" InstallAnywhere merely stops after it had finished extracting the files. No warning, no message, no log nothing! Has anyone any idee about what could cause this?
(I am working on Win2000 with Service Pack 2 and have previously installed WLS 6.1)

Two things to try with InstallAnywhere:
http://gamma.zerog.com/devnet_l/uT.jsp?page=kb/viewKB.jsp&itemID=181
Details the out of space messages and potential workarounds
http://gamma.zerog.com/devnet_l/uT.jsp?page=kb/viewKB.jsp&itemID=28
Explains how to put InstallAnywhere in debug mode, which can help show what
is the actual problem.
-Brett Schmoll
ADP/SIS
"Yves Adam" <[email protected]> wrote in message
news:3c4eb619$[email protected]..
When trying to install "WebLogic Application Integration" InstallAnywheremerely stops after it had finished extracting the files. No warning, no
message, no log nothing! Has anyone any idee about what could cause this?
(I am working on Win2000 with Service Pack 2 and have previously installedWLS 6.1)

CM 4.1 integration to ADAM

Similar Messages

Maybe you are looking for