Cmd+t in Excel 2011 not working

Hi,
I've just started moving over to the Mac. A search tells me that in Excel cmd+t is the Windows equivalent F4, which changes the absolute references within the cell. Unfortunately, this key combination is not working for me. Any help is appreciated. I am using Excel 2011 for the Mac and using Mac OS X v10.7.5.
Thanks.

Have a look on the right on this page under 'More like this'.

Similar Messages

I started to download Maverick but then read that Word and Excel do not work with Maverick. I hit pause on the download. How do I stop the download. In non technical terms please!

How do I stop the download of Maverick on my MacBookPro? I started downloading then discovered that 2008 Word and Excel do not work with Maverick. I have too many files in the 2008 version to upgrade them at this time. I just need instructions in non technical terms to stop the Maverick download.

I did the same as Tapmr and have paused the "upgrade". So am I to understand that the upgrade only downloads and will not automatically install it? I am an extreme novice here, and cannot afford any issues after I upgrade/download. I don't know how to make a clone copy as you suggested either.
I need assurance that if the upgrade is allowed to continue that I will be able to delete the upgrade downloaded and continue on as before with my regular system.

Interface for Excel does not work in Windows 7 - Important

Hi,
Im using BPC 75 MS SP04 with a computer Windows 7, IE 9, Office 2007. Apparently the Excel works "fine", the issue is that whenever I try to access to Interface for web from the main page (clicking the icon) it does not work, does not do anything...
What do you suggest to do?
Working directly in excel is not a problem, accesing to templates vía "Etools - Open dynamic templates" is fine.
The issue is that users that have every access controlled by BPF's (using Interface for Web) cannot work.
Also, we use a template that uses 12 EVDRE reports in the background, we know it is a lot... but it was required like that.
Once accesing to this template vía Etools -Open dynamic template... Excel gets stuck and I have to force it to shut down.
Also Im working with a Vista system, Office 2003.
For this systems, we also use the template EVDRE (12 reports). Once any of both systems access to this specific template, Excel gets stuck and I have to shut it down. Any other template is able to work with, but these 2 machines (7 and Vista) cant.
Please help !
Velázquez

Hi Velázquez,
Based on SAP Note: 1603248, IE9 is not supported on BPC 7 and 7.5.
So you have to revert to IE8.
Only IE8 and IE7 are supported in 7.5 MS.
Hope this helps.
Karthik AJ

Service Process Monitor export to excel is not working

Hi,
The Tx. CRM_SRV_REPORT ( Service -> Service Process Monitor) is not working.
When you try to export to Excel (press button Excel (CtrlshiftF7) is not working. However, this button in other transaction is working, for example Activity Monitor.
Any idea?
Lyda

Report to SAP. They sent a solution... it's an error

Sharepoint 2013 open in excel button not working

Hi,
We have a problem with buttons which are in top of the PowerPivot Workbook like OPENI N EXCEL, DATA , FIND, neither of
the buttons are not working. This is happening for ie11 browser with windows 8.1.
For Ie10 browser those are working fine. We suspect that if we upgrade that if we update from windows 8.0 to 8.1 those
are working fine for some machines, but most of the cases these options are not working for ie11. Can anyone please help what could be problem for this issue. we
need to find out when there is going to be a fix for this from SharePoint.
Thanks,
Bharath

Hi Bharath,
In IE11 if you choose the Browser mode to IE 10 does it works? Also enable Status bar on the Browser to see if there are any script errors. Check by adding the web site address to Local Intranet/Trusted sites zone to see if that makes any difference.
Does this happen for all users including Administrators with IE11.
Regards, Bhavik Jain

Excel Filter not working in Bex

Hi All
I have a report in Bex where I have a date field called basic date. Now when user is trying to select some basic function like greter than or less than a particular date(When we apply filter in excel we have the optioon Custom where so many option like greter than, less than, equals are available). It is giving blank value. I tried to change the format to date but still not working.
Please suggest.
Sunny

Hi Sunny,
The problem occurs if you set your auto filter in the wrong cell. I have found the easiest way to get auto filter to trigger in the correct cell is to click on a blank cell (i.e. outside of the analysis grid) and then switch on auto filter in Excel as normal. You should find that the filter icons appear in a different set of cells and when you use them they will contain the values in the columns.
Hope this helps!

27" iMac (refurb, June 2011) not working as an external display for my MacBook Pro.

I just got a 27" iMac (refurb, June 2011) and it's not working as an external display for my MacBook Pro (not Thunderbolt). Any idea why? Command+F2 does nothing. I am connecting via Belkin Minidisplay Port-to-Minidisplay Port adapter.
Any help is appreciated...thanks!

Currently the ThunderBolt iMacs can only be used as an external display by other ThunderBolt Macs.
http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
Apple is very clear about that.
2009 and 2010 27" iMac with a Mini DisplayPort can be used by other Macs with a MDP-to-MDP cable.
Stefan

Multiple Excel Sheet not working

Hi,
      I have a requirement where I need to split the excel data and send it to my inbox as excel attachment. But the below is not working as expected. Do let me know if there is issue with the below code.
DATA : lv_start type i value '1',
            p_split type i value '10'.
DESCRIBE TABLE i_attachment LINES lv_tot.
DO.
    IF lv_tot <= 0.
      EXIT.
    ENDIF.
lv_start = lv_start + p_split.
    w_packing_list-doc_size =
    ( lv_tot ) * 255 + STRLEN( ls_att ).
    w_packing_list-transf_bin = 'X'.
    w_packing_list-head_start = 1.
    w_packing_list-head_num = 0.
    w_packing_list-body_start = lv_start.
    w_packing_list-body_num = p_split.
    w_packing_list-doc_type = 'XLS'.
    w_packing_list-obj_name = 'ATTACHMENT'(009).
    w_packing_list-obj_descr = 'Excell Attachment2'.
    APPEND w_packing_list TO i_packing_list.
    CLEAR w_packing_list.
    lv_tot = lv_tot - 10.
    IF lv_tot <= 0.
      EXIT.
    ENDIF.
ENDDO.
Regards,
Siva.

Issue is resolved...
Solution is,
Remove selectionListener and selectedKey attributes from the table.
Delete code is:
DCBindingContainer dcBindings =
(DCBindingContainer)getBindings();
DCIteratorBinding dcIterator =
dcBindings.findIteratorBinding("Iterator...");
RowSetIterator rs = dcIterator.getRowSetIterator();
RowKeySet rks = this.t1.getSelectedRowKeys();
Iterator rksIter = rks.iterator();
while (rksIter.hasNext()) {
List l = (List) rksIter.next();
Key key = (Key)l.get(0);
Row row = rs.getRow(key);
if(row != null)
row.remove();
}

Oracle Applications 11i Export to Excel does not work.

The export button does not work. When I click on export it says complete but does not bring up a window asking me to save. I have pop up blocker off and the site added to trusted sites. I have tried everything I have found so far but no luck. Help would be much appreciated.....thanks!!!!

Please post the details of the application release, database version and OS.
The export button does not work. When I click on export it says complete but does not bring up a window asking me to save. I have pop up blocker off and the site added to trusted sites. I have tried everything I have found so far but no luck. Help would be much appreciated.....thanks!!!!Was this working before? If yes, any changes been done recently?
Can you reproduce the issue from other browsers/machines?
Can you find any errors in the database log file?
Please see these docs/links.
Troubleshooting Export and Attachment issues in Oracle Applications 11i [ID 338651.1]
Attachments and Exports, a Troubleshooting Guide [ID 135444.1]
Export To Excel: How To Activate Debugging? [ID 464469.1]
How to Troubleshoot Forms Hanging Using Export Functionality [ID 423261.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Troubleshoot+AND+Export&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Troubleshooting+AND+Export&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Export+AND+Excel&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Upgraded and now word, excel do not work, upgraded and now word, excel do not work

upgraded to 10.7.2 and now my excel, word etc do not work

Office 2004 and older will not work with Lion.

Upload Excel is not working

Hi all, Excel upload program is not working in SAP CRM 7.2 Service Pack 10 with IE 11. Same is working fine in SP08. Below is the code.
The debugger is not coming into Servervent handler method . any notes suggested ? sorry for posting the big code lines.
<thtmlb:fileUpload id="fileUpDown" />
<thtmlb:button id = "UPLOAD"
                iconSrc = "ICON_XLS"
                tooltip = "Upload Excel file"
                text = "Upload"
                onClick = "upload_file( );" />--%>
<thtmlb:textArea id = "Excel_Data"
      text   = " "
      width = "0"
      height = "0"
      rows   = "0" />
<%-- Registering server event--%>
<bsp:htmlbEvent name = "nameUpload"
                  id = "idUpload"
                  onClick = "SERVEREVENT"
<%--                 serverEvent"--%>
                  p1 = "p1"
                  p2 = "p2"
                   p3 = "p3" />
<script language="javascript" type="text/javascript">
function upload_file( ){
var iRow="1",
      jCol="1",
      ActiveRows="0",
      fileName="",
      sValue=" ";
fileName=document.getElementById("<%= controller->component_id %>_fileUpDown").value;
if ( fileName == "" ) {
alert("Upload." + "\n" + " " + "\n" + "Please choose an Excel file as source.");
return;
if ( fileName != "") {
<%--alert("Upload." + "\n" + " " + "\n" + "This file is to be uploaded:" + "\n" + fileName);--%>
var r=confirm("Upload." + "\n" + " " + "\n" + "This file is to be uploaded:" + "\n" + fileName);
if (r!=true)
return;
Excel = new ActiveXObject("Excel.Application");
Book = Excel.Workbooks.Open( fileName );
ActiveRows = Book.Worksheets("Input").Range("A1.IV64000").CurrentRegion.Rows.Count;
<%--ActiveRows = Range("A1.IV64000").CurrentRegion.Rows.Count;--%>
for (iRow=1; iRow<=ActiveRows; iRow++) {
for (jCol=1; jCol<=4; jCol++) {
cData = Book.Worksheets("Input").Cells(iRow,jCol).value;
<%--cData = Cells(iRow,jCol).value;--%>
sValue = sValue.concat(cData,"\n");
sValue = sValue.concat("\n\r");
document.getElementById("<%= controller->component_id %>_Excel_Data").value = sValue;
Excel.Workbooks.Close;
<%--return statement here calls the server event SERVERVENT--%>
return nameUpload();
</script>
regards,rama

Hello all,
Excel = new ActiveXObject("Excel.Application");
the above statement is not working in Service pack 10 CRM 7.2. any help is appropriated
thanks,rama

Word, powerpoint and excel are not working with lion. Has anyone else had this problem

Word, Powerpoint and Excel have stopped working since downloading Lion. Has anyone else got this problem?

Which version? If it is 2004, then you are out of luck - Lion no longer supports apps written for PPC processors, only Intel. There is no solution, either go back to Snow Leopard or upgrade to a later version of Office (2008 or 2011), or switch to another bracnd (OpenOffice, iWork).

SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working

So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.

Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration:            Member Workstation
OS Version:                  6.1.7601
Site Name:                   Default-First-Site-Name
Roaming Profile:             N/A
Local Profile:               C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS CSE Policy
        Windows SBS Client - Windows Vista Policy
        Windows SBS Client Policy
        Update Services Client Computers Policy
        C-Create Syntiro Root Folders
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
        Windows SBS Client - Windows XP Policy
            Filtering: Denied (WMI Filter)
            WMI Filter: Windows SBS Client - Windows XP
    The computer is a part of the following security groups
        BUILTIN\Administrators
        Everyone
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        This Organization
        OPTI9020-01$
        Domain Computers
        System Mandatory Level
USER SETTINGS
    CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS User Policy
        Windows SBS CSE Policy
        Small Business Server Folder Redirection Policy
        U-Word 2013 Default Save Location
        U-Office 2013 Disable Backstage
        U-Office Disable Start Screen
        U-Office Trust Center Settings
        U-Word Autorecover Location
        U-Word Autosave Interval
        U-Word Disable Capitalization First Word
        U-Word Set Arial Default Font
        U-Word UI Customizations
        U-Power Plan Settings
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
    The user is a part of the following security groups
        Domain Users
        Everyone
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        CONSOLE LOGON
        NT AUTHORITY\Authenticated Users
        This Organization
        LOCAL
        Windows SBS Link Users
        Windows SBS Fax Users
        Windows SBS SharePoint_MembersGroup
        Windows SBS Folder Redirection Accounts
        Windows SBS Remote Web Workplace Users
        High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet.

Crystal Reports 2011 not working in windows 2008 server CITRIX

Hi All,
We are using Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
We are using .net applicationton to run the reports.
The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
OK button is not responding. Cancel button too.
Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
Please feel free to ask if required any more details about my problem.
Regards,
Venkat.K

Ido's idea is excellent, only addition I'd like to make is the following:
You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Office for mac 2011 not working correctly on new Macbook Pro- Help

I have a MacBook Pro from September and had One to One transfer all files/programs (including 2008 Office). I then purchased the Office for Mac 2011 program and they installed it (I guess they did not remove the older program). It has never worked correctly and I have tried to contact Microsoft to no avail.
None of the documents open with Fonts intact (Word and Excel open up blank though the graphic elements show up. I have to Select All and choose a font to make it show up.
Powerpoint is barely functional (none of the layouts actually show up when I select them, the sidebar of slides does not update as I type or try to change themese, etc. And then when I type, the program freezes and then shuts down.
I have uninstalled 2008 and 2011 and then re-installed 2011 but the same issues occur. Someone on the microsoft community told me to remove my duplicate fonts, I ddi that and the same issues still occur. My brother has the same laptop and Office for Mac 2011 and no issues.
Can someone help me basically try to start fresh- should I uninstall again? (I waas told that installing/uninstalling too many times can further the problem).
Help!
Thanks,
Bernice

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Cmd+t in Excel 2011 not working

Similar Messages

Maybe you are looking for