Cobol Pro*compiler on Linux

Hello,
Is the Cobol Pro*compiler is available on Linux ?

Look at the file ORACLE_HOME/precomp/admin/pcscfg.cfg
on linux it shuold contain info related to the kernel used
mine is :
# cat ORACLE_HOME/precomp/admin/pcscfg.cfg
sys_include=(/usr/lib/gcc-lib/i686-pc-linux-gnu/2.95.3/include,/usr/include)
ltype=short
Hope it helps
Gilles

Similar Messages

Using a shared library compiled in Linux (.so) on a windows platform

Hi,
Can I interface a shared library compiled in Linux (.so) in LabView on a windows platform?
Gabriel Y

No.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Run C program compiled for Linux on Mac x11?

Hi,
Is it possible to run a c-code program compiled for Linux on x11? If this is not possible, is there a way to have a linux platform runninn os 10.6.8 so I can use these programs?
I knew little about Linux or X11, so I don't know if it is possible or how to recompile the program for x11.
Thanks!

Linux compile code will not run on Mac OS X, and even if you violated the Mac OS X license to run Mac OS X in virtual machine on top of Linux, the Mac environment would still not run the Linux program. The Linux program needs to run on Linux.
If your Linux program is X11 based, then it is possible to run the program on Linux and have the output displayed on your Mac. Start an Applications -> Utilities -> Terminal session, and run the command
ssh -Y [email protected]
LinuxPrompt> run_your_Linux_program
The ssh -Y will establish an X11 DISPLAY tunnel between your Mac and the Linux system. When you run an X11 based app on the Linux system via this ssh session, the X11 display output will be sent back to the Mac.
NOTE: Many Open Source programs have Mac OS X ports. Sometimes there are actual Mac OS X binaries, and sometimes you have to build them yourself. There are also services that will do the heavy lifting of installing a ported Open Source app, such as MacPorts.org and FinkProject.org

Oracle 10g or less Pro Fortran for linux ?

Hello,
I'm looking for the oracle pro-fortran for linux.
Where can i find it ?
Thanks

Doesn't appear to be part of the Linux bundle. It may not have been ported. I checked 10gR1 and 9.2.x.

Case-Sensitive problem while compiling in Linux

Hi All,
We have around 100 forms developed in windows platform. The forms use program units from plls. Compiling against windows do not have any problem. But when they are compiled in linux environment, we get error like frm-18108: unable to load form objects.
Also the program units of the pll's are not referred correctly, since the declaration is in upper case and the calling in the other forms is in other cases.
Is there any way to by-pass this case-sensitive problem, other than making them even in case, in the forms and libraries.
Thanks
Gopal

Hi Francois,
I had already tried with having all combinations of file name but still I am getting
error
"Compilation error on procedure CG$KEY_STARTUP:
PL/SQL ERROR 201 at line 9, column 1
identifier 'SET_MDI_TITLE' must be declared
PL/SQL ERROR 0 at line 9, column 1
Statement ignored".
The set_mdi_title PU is defined in PLL and the library is attached to the form. When I compile the form using f90gen, I am getting the above error.
Please suggest.
Thanks Gopal

Pro*Fortran for Linux

We are porting a system over to Linux machines from an SGI. It uses sql calls
in the fortran code which on the sgi were
handled with the ProFortran compiler. Apparently, Oracle does not support the ProFortran compiler on Linux. Is there a
way to get one, or will it be supported in
the future?
Thanks,
Bob Clouser
MIT Lincoln Laboratory

Doesn't appear to be part of the Linux bundle. It may not have been ported. I checked 10gR1 and 9.2.x.

Pro*Cobol PCO Compilation problem in Linux

Hi,
DB :oracle 11g on RHEL 5.5
when we are compiling the (Pro*cobol ) PCO code it is giving us the error :
System default option values taken from: /oracle/oracle11g/app/product/11.2.0/dbhome_1/precomp/admin/pcbcfg.cfg
Error at line 320, column 35 in file BR2385.PCO
WHERE A.SOC_NO = :PARAM-SOC
..................................1
PCB-S-00223, Undeclared variable "PARAM-SOC".
when we change the pcbcfg.cfg file with flag : declare_section=no it's compile without error.
But in this scenario cobol app doesn't run.
if we declare the undeclared variable in the section
EXEC SQL BEGIN DECLARE SECTION END-EXEC.
PARAM-SOC PIC X(25).
EXEC SQL END DECLARE SECTION END-EXEC.
and compile it with declare_section=yes then cobol app. run fine.
Are different files generated (cob,int,gnt) after compilation with the option declare_section=no and declare_section=yes.
Pls help us in this regards. we have lot of file which having these issue and we don't want to do manual changes "EXEC SQL BEGIN" in it.
Thanks in advance..

Your code is faulty and has to be fixed.
No compilation problem is present, the compiler correctly barfs.
As this is not a support forum, kindly keep your non-issues out of this forum.
Thank you!!!
Sybrand Bakker
Senior Oracle DBA

Pro c on linux oracle 8.1.5

I use oracle 8.1.5 on redhat linux 6.1
and I encounter a problem
when compile the demo from oracle
pro c version 8.1.5
in precomp/demo directory
make -f demo_proc.mk
[oracle@dragon proc]$ make -f demo_proc.mk
make: `/home/oracle/lib/libclntsh.so' is up to date.
[oracle@dragon proc]$
what problem?...
null

Hi,
U should use this command
make -f demo_make.mk samples
or
instead of samples , u can use the sample1 or sample2 .....
Note: above mentioned commands are lnking libraries dynamically. So should set LD_LIBRARY_PATH.
For static building
make -f demo_make.mk samples build_static
If u have any more doubts, U can send personal mails also.
With regrads,
Boby Jose
null

Compiled on linux, trying to run on win32

newbie here.
I compiled & ran several simple apps on my redhat box. No problem there.
What I'm now trying to do is run them on my win32 (win2k pro) box. I have the jre installed on my win32 box, so that's kosher. It appears that I'm not packaging things correctly though. What do I need to do? Obviously simply copying the .class files over isn't doing the trick. Help?

Here's the cmd line
C:\>java c:\temp\francConverter
(I've tried setting -cp, but maybe this is the problem... i may be doing this incorrectly. I've also tried this & other programs with the .class extension after them - figure that both should work)
It's a NoClassDefFoundError which I've searched the docs on -> way to many search results there, and I couldn't find any addressing my specific issue.
Exception in thread "main" java.lang.NoClassDefFoundError: c:\temp\francConverter
Here's the francConverter.java src file:
import java.text.*;
public class francConverter {
public static void main(String[] args) {
double dollars;
double francs = 100.00;
final double RATE = 6.85062;
dollars = francs/RATE;
DecimalFormat myFormatter = new DecimalFormat("$###,###.00");
String output = myFormatter.format(dollars);
System.out.println(output);
I just started learning yesterday, so pls forgive my ignorance. All is running beautifully on Linux. Just don't know how to distribute x-platforms outside an applet, and it's difficult to find info on distributing java programs.
Much thanks java people. I'm having great fun learning.

Personas suddenly not working Firefox 30, 31, 32 on Win 7 Pro x64 and Linux Mint 16 x64

Personas which have been working for a long time suddenly quit working on Win 7 and Linux. I tried changing to a different persona to change the background for the top border of the window and it just goes to some odd color and the personas just don't show up. This has been with Firefox 30, 31, 32. The personas still work with Win XP Pro run as a virtual machine on Win 7 host or Win 8 host. I thought it was a Windows thing until I saw the same problem with Linux. Everything else seems normal so this isn't a real bad problem. It's just odd.

Make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history).
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*Deselect: [ ] "Always use Private Browsing mode"

How to compile Oracle Linux source?

I accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?
I tried to search this forum as well as other places but couldn't find any information hence thought of opening a thread before I proceed to download correct file which will again take 10+ hrs with my Internet speed :(
Any help is highly appreciated. Also I need to know which packages are required to be installed for compiling the source if at all that is possible. I am using Ubuntu 11.10 Desktop.
Thanks in advance for any help and hope to get a reply soon :) I need to urgently install Oracle 11gR2 on it.
Edited by: user6582219 on Apr 12, 2012 1:10 AM
While browsing the forum for any possible solution I came to a thread that discuss installation of a package oracle-rdbms-server-11gR2-preinstall. When searched through search engine I came to know about recent certification Oracle 11gR2 on Oracle Linux 6, here is the link https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.
I would still appreciate if someone could answer my question just for knowing the procedure compiling source. May be it can help someone else trying to achieve this.
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.
Before proceeding here are my environment details:
Machine: x86 32 bit with 2 GB RAM/250 GB HD.
OS: Kubuntu 11.10 Desktop and Oracle Linux 6 Update 2 in dual boot mode.
Here are my partition details for your reference but as I am planning to do the installation from the scratch following new ideal scheme you can jump to last paragraph following the line "*********************************" for my questions.
Unfortunately my partition plan went wrong and here is what I have now:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3d5ba9e1
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1002047 500000 83 Linux
/dev/sda2 151525080 361253654 104864287+ 7 HPFS/NTFS/exFAT
/dev/sda4 1003518 151001087 74998785 5 Extended
/dev/sda5 1003520 7002111 2999296 82 Linux swap / Solaris
/dev/sda6 7004160 11001855 1998848 83 Linux
/dev/sda7 11003904 51001343 19998720 83 Linux
/dev/sda8 51003392 110041087 29518848 83 Linux
Partition table entries are not in disk order
/dev/sda1 here is /tmp, /dev/sda2 is my data partition, I have separate /home / (root) partition for Kubuntu and remianing around 20 GB in extended partition is used for Oracle Linux 6.2 with default Oracle suggested LVM partition. I also have separate /boot for Kubuntu and I chose not to install grub while installing Oracle Linux. I later modified grub.cfg to add entries for Oracle Linux and now I can boot both OSs successfully.
My issue now is I cannot extend 20 GB space (in extended partition) that I have given to Oracle though I have around 40 GB space available. This is because I alreay have 4 primary partitions (one for /boot others for "data" and one extended partition). So I have to make primary partition out of free space and install Oracle in a single partition without following recommended partition layout scheme.
Now I want to do the installation of both the OS from the scratch and really need an advice on partition layout scheme. Here is summary of what I wan to achieve:
1. Keep the "data" partition (primary) intact and carve an ideal partition layout for both the OS with separate /boot, /tmp, /home, swap (and may be for /usr???). Also may be I can share swap?
2. How do I go about using LVM and is it recommended for this case? What would be ideal locations for each partitions and sizes? I already used 100 GB for "data" so now I want to keep 60 GB for Oracle Linux (and Oracle DB for which I will again make few sub-partitions) and remaining will be for Kubuntu.
Well, I am not sure if this is the right place to ask these questions but since I can see very knowlegeable top contributors here that are willing to help novice users I thought of posting these questions.
I would really really appreciate if someone can provide me rough draft of partition scheme in my case considering the sub-partitions needed for Oracle DB. I went thorugh number of forums and documentations to come up with solutuion and finally thought of getting help after much confusion.
I really need to carefully plan this time because it's third time I am doing reinstallation from the scratch because of poor plan I followed previously.
Thank you very much in advance and please let me know in case more information is needed from my side.
Regards,
Ramesh

I accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?Google will be your best friend for such a question, for instance, "Creating a Custom centos Linux bootable ISO Image". There is no need to duplicate the effort. I recommend you download the correct installation DVD, e.g. 5.8
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.So you don't need to install 5.2 anymore, but you want the information how to compile a installation DVD from the 5.2 source anyway?!
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.Questions may be important for you, but not necessarily for others. No one will complain if you create a new thread for particular questions or subjects. It is better to separate your topics and questions rather than creating a multi-mega thread, which does little to help anyone else but you. It means more work on your end, but it will be easier for anyone to participate or answer your questions, and it will allow you to better award answers.
Regarding your partitioning questions: It is generally difficult to address such topics in a forum. You are asking for a book of information. My advice is to drop the old fashioned concepts of dual or triple boot options and install Oracle VirtualBox instead. It will make all of these questions obsolete and you can use whatever defaults when installing your virtual machine guest OS. Its a far more superior way of dealing with multiple operating systems on one and the same computer.
I am using Ubuntu 11.10 Desktop.
I need to urgently install Oracle 11gR2 on it.For what it's worth, if you can combine the two source below you should be able to install and run 11gR2 on Ubuntu 11.10.
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
However, check out VirtualBox.

Using Pro*C on Linux Oracle 8.1.6.0 on RH 6.2

Whe have some problems using Pro*C:
the program runs ok on all Oracle versions, including Oracle 8.1.6.0 on DEC OSF, but various sql errors are encountered on Linux Red Hat 6.2:
1) "ORA-01458: invalid length inside variable character string" for this code:
EXEC SQL BEGIN DECLARE SECTION;
varchar I_LANGLB [4];
short O_NOLBLB ;
varchar O_LIBELB [26];
EXEC SQL END DECLARE SECTION;
EXEC SQL INCLUDE SQLCA.H;
EXEC SQL WHENEVER SQLERROR GO TO MAJ_RESULT;
EXEC SQL WHENEVER NOT FOUND CONTINUE;
EXEC SQL DECLARE C0 CURSOR FOR
SELECT LBL.NOLBLB, LBL.LIBELB
FROM LBL
WHERE LBL.EDITLB = 'MON' AND LBL.LANGLB = :I_LANGLB;
strcpy (I_LANGLB.arr, "fra");
I_LANGLB.len = 3;
EXEC SQL OPEN C0;
for ( ; ; )
EXEC SQL WHENEVER NOT FOUND DO break;
EXEC SQL FETCH C0 INTO :O_NOLBLB, :O_LIBELB;
EXEC SQL CLOSE C0;
2) with Dynamic Sql: "ORA-01007: variable not in select list"
SELECT
nvl(MODEME, ''),
nvl(NBANME, 0),
nvl(BASEME, '0'),
nvl(PRORME,'0'),
nvl(EVALME, '0'),
nvl(DECOME, '0') ,
nvl(CDDAME, '0'),
nvl(CDMIME, '0'),
nvl(TXMIME, 0),
nvl(CDMAME, '0'),
nvl(TXMAME, 0),
nvl(CDTXME, '0'),
nvl(CDSUME, '0'),
nvl(TXSUME, 0),
nvl(DUMIME, 0),
nvl(MTVNME, 0),
nvl(NOANML, 0),
nvl(TAUXML, 0),
DESIME
FROM MET, LME
WHERE MODEME = MODEML
AND nvl(INLBME,'1')='1'
ORDER BY MODEME,NOANML
[ or
ORDER BY 1,17 ]
In both cases,
We use the following precompiling options:
include=/oracle/OraHome1/precomp/lib ireclen=132 oreclen=132 sqlcheck=syntax parse=partial select_error=no char_map=VARCHAR2 mode=ORACLE unsafe_null=yes
dbms=V8
Could someone help ?
Thanks ...

My answer is only for 1. problem (about ORA-01458)
I think that you use declaration for cursor C0 with a varchar
variable before you ininitialize length (member .len of varchar
structure) of this variable.
It's famous that many errors come from uninitialized varchar
variables in Pro*C.

Forms 9i - Compilation on Linux - property class,VA from base form

Hi all,
We have got around 400 forms converted from forms 6i to forms 9i.
We have subclassed property classes and visual attributes to most of the forms from the base form (say std.fmb).
Now , we need them to be compiled on Unix / Linux for the first time.
While compiling, we get message "FRM-18108: Failed to load the following objects." but the .fmx file is created.
We understand that this is due to the reference of the source form as STD and not as std. How to correct this problem but without renaming the form std to STD or having one more copy of that as STD.fmb.
Please suggest

Hugo,
the Forms module can be compiled without having to compile oracle.forms.demos.ProgressBarPJC. Just have the implementation class reference in teh Forms module and use the same jar file.
Frank

Problem compiling in Linux using ant

Hi,
I have a problem using ant in Linux.
When I build my application using ant in Windows it works fine, but when I try to build the same application with ant in Linux it gives me the following exception:
/identifier/MidiReader.java:5: error: Class or interface `javax.sound.midi.Sequence' not found in import.
I have already checked and the 'javax.sound.midi.Sequence' exists in import.
Can anybody help me?
Regards,
David

In your javac task (in Ant), you need to explicitly include any external JAR's required for compilation (see ant.apache.org's docs for info). Importing them in a Java source file does not tell Ant where to locate the JAR for linking.
- Saish
"My karma ran over your dogma." - Anon

Bug in Pro*C on Linux!

When I have installed Oracle8i Release 8.1.5.0.1 on Linux(kernel is 2.2.10).
I use Pro*C/C++: Release 8.1.5.0.0 to precompile the programme list below.
I run this programme to connect to Oracle8 Enterprise Edition Release 8.0.4.0.0
installed on Digital Unix(V4.0) and I get "ORA-01002: fetch out of sequence"!
What's wrong or it's bug!
If I precompile the programme on Digital Unix using Pro*C/C++: Release 8.0.4.0.0
and connect to RDBMS on Digital Unix,all is Ok!Also if I precompile the programme
on Linux and connect to RDBMS on Linux itself,all is Ok too!
#include <stdio.h>
#include <string.h>
EXEC SQL BEGIN DECLARE SECTION;
char usrpwd[30];
char *sqls;
EXEC SQL END DECLARE SECTION;
EXEC SQL INCLUDE SQLCA;
main()
sqls="select dhhm from tyt_yhda";
strcpy(usrpwd,"rmmbis/rmmbis1234@ora8");
EXEC SQL WHENEVER SQLERROR GOTO err_select;
EXEC SQL CONNECT :usrpwd;
EXEC SQL PREPARE SS9 FROM :sqls;
EXEC SQL DECLARE CS9 CURSOR FOR SS9;
EXEC SQL OPEN CS9;
EXEC SQL CLOSE CS9;
exit(0);
err_select:
printf("%s\n",sqlca.sqlerrm.sqlerrmc);
null

Look at the file ORACLE_HOME/precomp/admin/pcscfg.cfg
on linux it shuold contain info related to the kernel used
mine is :
# cat ORACLE_HOME/precomp/admin/pcscfg.cfg
sys_include=(/usr/lib/gcc-lib/i686-pc-linux-gnu/2.95.3/include,/usr/include)
ltype=short
Hope it helps
Gilles

Cobol Pro*compiler on Linux

Similar Messages

Maybe you are looking for