Cockpit and My Menu

Hello,
I enabled the cockpit in SAP 8.8, but now I can't seem to find My Menu. How do I find My Menu items with the cockpit view.
Thanks

Hi,
It is not possible to use both My Menu and Cockpit .
The queries which saved in My menu can be used in Cockpit, instead you need to convert those into Crystal Reports.
Regards,
Bala

Similar Messages

How To Change Hyperlinks And Nav Menu Colors

I continue to see people stating that it's impossible to change hyperlink colors and navigation menu colors until after you publish your site. This is not true. It's quite easy to update your templates with the colors YOU want and when you update the template, you never have to mess with any post-processing. You make a new page? Your colors are already there.
I've gone over this before in this thread:
http://discussions.apple.com/thread.jspa?messageID=3288533&#3288533
But I'll go over the quick and dirty version here as well. Those who want more detail can post a question and I'll elaborate.
First, do you know how to get into iWeb's inner folders? You right click or control click on your iWeb icon and select Show Package Contents from the pop-up menu.
Step 2
Once you've done that, you'll see a new Finder window that shows a folder called Contents. Open that and then open the next folder Resources. Within Resources there's a folder named Shared. Open the Shared folder.
You're now looking at your collection of iWeb template files. You'll notice that each template has seven individual page files - each file defines the layout and styles for the page for which its named. This is actually one of the two places where you'll find the data/images that make up your iWeb pages. This location only contains the images. Now I'll show you were to find the data file.
So you're currently here:
/Applications/iWeb/Contents/Resources/Shared/
You want to go here:
/Applications/iWeb/Contents/Resources/English.lproj
Now if you speak another language and your Mac's system language is set to the language you speak, substitue English with that language. If your system is set to English regardless of the language you speak, and you use the English templates, then stick with the English folder.
When you're in the English.lproj folder, you will see seven sub-folders and one file named TemplatesInfo.plist. TemplatesInfo.plist is the file that registers the templates and tells iWeb what you've got in your collection. But we don't care about that file for now. We're after the template data files.
The seven sub-folders are aptly named for each of the seven page-types as you can see. Open the About Me folder.
Now you will see an "about me.webtemplate" file for every template you have in your collection. Good job. You've learned something new. Move on to Step 3.
Step 3
If you haven't decided yet, now's the time to decide which template you'd like to update. If you're just along for the ride to learn something new, no worries. We won't do anything you can't undo.
Pick a template file now. Perhaps you chose the White template, or:
White About Me.webtemplate
Right click or control click on this file and select Show Package Contents from the pop-up menu. This will launch a new Finder window that displays the contents of the White About Me.webtemplate file.
You will likely see a handful of different files, but the file you want is the one named Index.xml.gz.
Index.xml.gz is the brain behind the template. Within this file are all the settings for the page you chose and it's really not hard to find what you want and change it. So let's take a peek.
Step 4
Double-click the file Index.xml.gz. This will reveal a new file named Index.xml. You might have to scroll down in your Finder window to see it. Rename Index.xml.gz to Index.xml.gz.backup in case you screw things up, you have your original.
Now, open Index.xml with TextEdit. Do not open the file with a code editor unless you have already formatted the file.
When the file opens, you'll notice it's one gigantic jumbled mess of stuff. No worries, we'll straighten that out. All you need to do is a find/replace.
Find all instances of: ><
And replace with:
<
The line break is important so maybe just copy the lines right out of this post. When you replace all of those, the file will be far more easy to view.
Assuming you've completed that step. You're basically ready to make your change and test it out! Not hard ey?
So let's say you want to change your hyperlink color from grey to blue. Search for this string:
BLDefaultHyperlinkCharacterStyleIdentifier0
When you find that string, you will see a few lines below it, two lines that look similar to this:
<sf:fontColor>
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r=".8" sfa:g="1" sfa:b="0.4" sfa:a="1"/>
This is how the template specifies color. It's RGB100. Your Mac came with a program called Art Director's Took Kit and that application can tell you the RGB100 values for any color you want. Tinker with that and you'll have a lot of fun with this.
So I picked out a nice royal blue for you. The RGB100 values for it are:
R:0 G:25 B:100
What you need to do is update the color line to match those values:
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g=".25" sfa:b="1" sfa:a="1"/>
Notice that you specify these in terms of a percentage, where 25 became .25 and 100 became 1.
Step 5
Save your file. It's time to see your work in action. Open iWeb if it isn't open already and create a new page using the template you've just altered. If you altered the White About Me page, then select that and create the new page.
It there are hyperlinks already on this page, you should already see that they reflect your new color. If there aren't any hyperlinks, then type some text and create one. You should see your new link color right away!
Now if you don't see the new color, either you picked the wrong page or you neglected to rename the Index.xml.gz file a few steps back. If you did not rename that file, then it's still in control of your template. Rename it now and try again.
If you don't like that color, simply swap back to the TextEdit page and change it until you like it - switching back and forth between the file and iWeb to view your changes. Once you're happy, make note of the color you chose and make the change for the remaining six pages in the tempalte you selected. Just be sure to follow the steps for each page you edit. If you fail to see your change, again, check to see that you renamed Index.xml.gz.
Side Notes
For the more technical, rather than editing an existing template, you might want to duplicate and rename a template. This essentially creates a brand new one. If you're pretty good within Finder then go for it, just be sure that you duplicate the files in both locations:
/Applications/iWeb/Contents/Resources/Shared/
/Applications/iWeb/Contents/Resources/English.lproj/...
Choose a unique name for the duplicated template and change every single file so that the new name replaces the old one. You would have to register this new template in the TemplatesInfo.plist file as well, but I'm not going to get into that here.
The thread I referenced at the top has all kinds of search terms to find the other hyperlink styles (rollover and visited) and all the navigation menu styles plus a bunch of other fun stuff.
Now, it seems long, but that's because I wrote it well. The shortest version of this I've ever written was two sentences, but that was for a UNIX geek and he got it. It's just as easy for you, but I write it out so that anyone can do this, because anyone can. It's just not hard.
If you have questions about any of the steps, go ahead and ask.

Good. Okay here's how to apply a background color to your nav bar buttons. For example, my Aerolite template sets the selected page to a black background color. The rollover effect uses a gradient fill. I'll describe both of those here.
First, here are the navigation menu search terms:
navbaritem-style-normal-default
navbaritem-style-rollover-default
navbaritem-style-selected-default
navbar-pargraph
The first three set the button effects and text colors. The last one there sets the font, font size and other paragraph styles.
To change the selected page button background color, or gradient or image, first search for it using the search term above. Start from the top of the file because there are two instances of those terms, one where you can set the values, the other is only reference to the first and does not allow you to change settings.
When you find the search term, you might want to insert an empty line above it to help separate it from the rest of the code. You can also insert an empty line below the section. The end of this style ends with:
</sf:navbar-item-style>
Be careful not to mix that up with </sf:navbaritem-character-style>
Now, within this section, you'll find all kinds of settings... stroke, fill, character styles, etc. Notice you can change font color in there. But for this demo, you want to find the section that looks like this:
<sf:fill>
<sf:null/>
</sf:fill>
I'm assuming you're editing an Apple template that does not already have a fill effect. If it does have one, then your example might not look exactly like that.
To apply a color fill, change those three lines to these lines:
<sf:fill>
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g="0" sfa:b="0" sfa:a="1"/>
</sf:fill>
You can see that we've inserted the line that specifies color - something you should be familiar with by now. Here you can specify the color that will become the background of your nav bar button. This example specifies black. Easy no?
If you would prefer a gradient fill, then replace those three lines with this:
<sf:fill>
<sf:angle-gradient sfa:ID="SFRAngleGradient-1111" sf:opacity="1" sf:type="linear" sf:angle="0">
<sf:stops sfa:ID="NSMutableArray-1111">
<sf:gradient-stop sfa:ID="SFRGradientStop-1111" sf:fraction="0">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0.40" sfa:g="0.40" sfa:b="0.30" sfa:a="1"/>
</sf:gradient-stop>
<sf:gradient-stop sfa:ID="SFRGradientStop-2222" sf:fraction="1">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0.64" sfa:g="0.66" sfa:b="0.54" sfa:a="1"/>
</sf:gradient-stop>
</sf:stops>
</sf:angle-gradient>
</sf:fill>
Now, don't panic Here's what this is. The first line allows you to specify the angle of your gradient. Play with the numbers from 0 to 359 until you have what makes sense for your design.
Then, you will see two familiar lines again - the lines that allow you to specify color! The first line is the first color of your gradient and the second color is the second color of your gradient. That's all there is to it!
SECRET: It might be possible to add additional colors, not just two. Do you see the part sf:fraction="0" and sf:fraction="1"? These are gradient stops. I'm willing to bet that if you inserted a thrid gradient stop with a fraction setting of .5, you'd have a three-color gradient!
<sf:gradient-stop sfa:ID="SFRGradientStop-3333" sf:fraction=".5">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g="0.25" sfa:b="4" sfa:a="1"/>
</sf:gradient-stop>
I have never tried this - it just occurred to me as I was looking at this code. Big prize for the first person to prove the theory
NOTE: You will notice that the number 1111 and 2222 are within this code. iWeb XML relies on identification tags here and there. It's nothing you really have to care about except if you insert gradient fills in more than one area. Those numbers need to be unique so if you paste that code in for your selected page button and then paste it again for your rollover buttons, you'll need to update the numbers for the second button. Any numbers are fine. Use 3333 and 4444 for the second set, 5555 and 6666 for the thrid and so on. I often just type 4345781476 - doesn't matter.
Next lesson will be images.

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

The spry pop-up menu I built in Adobe Dreamweaver worked fine in my old Firefox, I updated Firefox today and the menu no longer works--despite disabling the pop-up blocker in Firefox preferences...what's the problem??? I need the menu to work!!!

I built a new pop-up menu for my website using Spry in Adobe Dreamweaver. Because of some differences in .HTML and .XHTML
it took me days to get it right. I tested every variation in Firefox until it worked perfectly. Today, I installed the newest version of Firefox and now the pop-up no longer works. I changed the preferences in Firefox to disable to pop-up blocker and it STILL DOESN'T WORK...although an older style of pop-up menu (menu machine) which is no longer supported by Adobe, DOES WORK.
HELP!!! THIS IS IMPORTANT.

pixlor:
OP is using CS3 and the menu blog is talking about the menus
in earlier
versions of FW, so *most* of the points made in the blog
don't apply.
That's not to say that using CS3 pop-up menus is a *good*
thing....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixlor" <[email protected]> wrote in
message
news:gbce7b$a50$[email protected]..
>
quote:
Originally posted by:
captainbianco
> I agree completely and totally, and I will haha but I'd
like to get this
> one
> fixed if I can. You can view the page here
>
http://www.flooringanswers.com/nysurfaces/index2.htm
> Hover over the letters to see the pop-up menu's. The one
over "t" is the
> problem.
> Under Flooring, for example, you have a div with id of
> MMMenu0910163730_1_1
> (ugh). Under that are four items and they have their own
IDs:
> MMMenu0910163730_1_1_Item_0
> MMMenu0910163730_1_1_Item_1
> MMMenu0910163730_1_1_Item_2
> MMMenu0910163730_1_1_Item_3
> MMMenu0910163730_1_1_Item_4
>
> Your CSS file, however, doesn't have location
information for the ..Item_4
> object.
>
> That's just from a quick, cursory look. In order to fix
this, you're going
> to
> have to go through it line by line and debug it. By the
time you do this,
> you
> might be better off getting something else and starting
from scratch.
>
> Read this:
>
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
>

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

Jayhawk
I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
ATR

I accidently unmarked the book marks tool bar, the tool bar and the menu bar how do i get them back ?becaus now only the tabs are visible and i cant access my features or book marks

i was getting to know my firefox so i accidentally unmarked the menu bar the book marks tool bar and the tool bar. so now only my tabs are visible and i cant get to any of my add-ons or extensions.
and even surfing the net has become difficult cause there is almost nothing i can do with a new empty tab.
how can i get these bars back. i tried taking the cursor up to the thin line above the tabs and the window border but the menu to mark the above mentioned features does not appear any more.
i tried restarting firefox several times but it didn't work. i even uninstalled and completely downloaded a new version of firefox and installed it but the problem still persists.
i am operations system is windows XP.

Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
The F10 can also be used on most PC's to temporarily reveal the Menu bar.
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

Mac Mini desktop folders/icons and top menu blinking on and off

Hello. I've just returned to my Mac Mini after being away for a few days. Upon booting and having the desktop fully load, I have been experiencing all folders/icons and top menu bar blinking on and off every ten seconds. I have only opened Fire Fox to try and diagnose why this is happening. No solution yet.
I am running Snowleopard with Mavericks and I'm aware Mavericks is a little buggy at the moment (beach ball used to blink on and off every now and again and performance has gotten slow) I only have the HDD replaced last week as the last one failed. I really need to fix this problem soon as I rely on my Mac to work from home.
Any help would be greatly appreciated
Jan

I have sovled the problem! for now at least. I came across another users suggestion to dissable "sync status icons" in google drive as it confics with the finder in Mavericks. I guess this would only work with others having this problem with Google Drive and Mavericks.

I have dual displays. My dock is on the MBP bottom and the menu bar is on the extended monitors top.

I have a Dell 2408 acting as the main display and a 15" MBP. For some reason, today the dock ended up on the MBP screen at the bottom and the menu bar is on the Dell at the top. I can't seem to move the dock back to the Dell. Can someone help? I tried moving the menu bar to the MBP and then back, hoping the dock would follow but no luck.
Thanks for your help.

When the dock is defined as on the bottom, it will appear on the screen of the extended desktop that is lowest.
Move the second monitor where the bottom edges are equal or the Dell is lower and the dock will move there.
Regards,
Captfred

Please Help SL - Everything 'quits unexpectedly' and top menu bar flashing

Please Help. Snow Leopard - Everything 'quits unexpectedly' and top menu bar flashing.
Basically, I have been using snow leopard for about 1-2 weeks now without any problems, apart from the strange trackpad expose glitch, but I can live with that. But a new problem has arisen that I CANNOT live with. Basically I plugged in my MiniDisplay > VGA adaptor and a Wacom internet tablet for the first time. And when it booted up rather than just the usual spinning gear, their was a progress bar as-well. Then it booted into Safe Mode.?
Everything was fine in safe mode apart from spotlight didn't work properly so I rebooted and this time it loaded normally. EXCEPT about 5 minutes after I logged on the top menu bar started to flash on and off about ever 1-2 seconds and virtually every single application would quit unexpectedly before even loading. I haven't really looked into it apart from a quick search on google which doesn't seem to bring up anything similar, but atm I am having to use my bootcamp partition with windows installed (shock horror :D) just so I can browse the internet.
Additional details -
I have tried resetting PRAM + NVRAM with no joy
While logging on (before it crashes), menu items (e.g. Airport, Battery Indicator, Facebook Notifier) all load up on the far right BEFORE the clock, which never happened before the problem, don't know if this will help isolate the problem, but its worth mentioning..
Don't really want to go down the fresh install route if possible, as I did this with leopard about 2 months before Snow Leopard was released

I noticed it some weeks after installing Snow Leopard, and didn't think much about it since I have a Wacom mouse, and the Wacom driver often has some little peculiarities at startup with the Mac OS--sometimes everything is perfectly ordinary, there will be an OS update and a little oddness shows up, the driver eventually gets updated and the oddness disappears until some other OS update, and so on. I just figured that was what it was until my brother asked about the missing the menu bar after startup, which reappears with a click. He doesn't use a Wacom mouse, but he does have some other 3rd party mouse. I don't know whether 3rd party mouse drivers are at fault or not. But it is not a problem with the SystemUIServer.....the entire menu bar is missing, not just a goof-up on the Spotlight end, where SystemUIServer is in charge of things. Since simply clicking the mouse brings the menu bar up I've never even bothered to check the logs to see if anything is noted there.
Francine
Francine
Schwieder

Split Suite Bar and Ribbon Menu in SharePoint Online / O365

As we all know the suite bar and ribbon menu controls are loaded from a single control. I have a requirement to place a div between suite bar and ribbon menu as shown in the image. Is it possible in SharePoint Online / O365?
Current suite bar and ribbon menu control(HTML Master Page Template)
<div id="ms-designer-ribbon">

<div id="TurnOnAccessibility" style="display:none" class="s4-notdlg noindex">
<a id="linkTurnOnAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(true);UpdateAccessibilityUI();document.getElementById('linkTurnOffAcc').focus();return
false;">


</a>
</div>
<div id="TurnOffAccessibility" style="display:none" class="s4-notdlg noindex">
<a id="linkTurnOffAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(false);UpdateAccessibilityUI();document.getElementById('linkTurnOnAcc').focus();return
false;">


</a>
</div>

<div class="DefaultContentBlock" style="background:rgb(0, 114, 198); color:white; width:100%; padding:8px; height:64px; ">In true previews of your site, the SharePoint
ribbon will be here.</div>
</div>



Actual Requirement

Hi,
According to your description, my understanding is that you want to do customization in SharePoint Online with the requirement above.
For the first question, continue to Scott, you can read the rss feed, the rss feed effectively contains the items from the list, you can read the list using Client Object Model to get RSS feed.
For the second question, if you want to get current log in profile in my site, then you can try to use user profile rest api to get it.
User profiles REST API reference
For the third question, if you want to deploy the announcement app from on-premise to Online, if it's OOTB app, then it's not necessary, SharePoint Online have the announcement app as well.
For the fourth question, if the CapIQ is a customize solution, I suggest you can use SharePoint hosted app to publish to the SharePoint online site.
How to: Publish an app for SharePoint by using Visual Studio
For the fifth question, if you want to upload the questions not create in site to the survey, you can use Client Object Model to create the questions.
Here is a similiar thread for your reference:
Importing
Questions into a Sharepoint Survey
For the sixth question, if the information is stored in the list, then you can read the list using Client Object Model and it's better to create a SharePoint hosted app to achieve it.
More information:
How to: Create a basic SharePoint-hosted app
Retrieve list item
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Wouldn't be a handy update if at the top of the open Pages document, next to the Apple and Pages menu option, it showed the open document name or file name?

Just as the title says, really.

I'm not sure where the Apple and Pages menu option is. When I'm editing a document in iCloud Beta the name of the document is in the window caption (below).
But your suggestions should be sent directly to Apple and you can do that via the Send Us Feedback button at the top of the document list page:

Please help! How can I validate Radio Buttons and List Menu with PHP.

Hello everyone, I have been learning PHP step by step and
making little projects.
The point is I find it easy to learn by doing "practical
projects."
I have been reading the David Powers's Book on PHP Solutions
and it's really great, however there is nothing mentioned regarding
Validating Radio buttons. I know the book cannot cover every aspect
of PHP and maybe someone in here can help.
I have been learning how to process HTML forms with PHP.
The problem is every book or tutorial I have read or
encountered fall short on validation.
I'm wondering how I can learn to validate Radio Buttons and
Select List Menu.
I have managed to create validation for all other fields but
have no clue as to how I can get validation for Radio Buttons and
List Menu.
I would also like an error message echoed when the user does
not click a button or make a selection and try to submit the form.
I would appreciate any help.
Patrick

It's not that default value is "None." In fact it's not. It
will only be
"none" when the form is submitted.
Also if your submit button is names 'send' then
$_POST['send'] will only be
set if the form was submitted.
Make sure you didn't hit the refresh button on your browser
which usually
reposts the information. Also make sure you did not reach the
form from
another form with the same button names.
Otherwise paste the snippet.
Also you can check what fields are set in the post array by
adding this to
the top of (or anywhere on) your page:
print_r($_POST);
Cosmo
"Webethics" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> Off the top of my head this should be no different than
your radio buttons
> except that 'productSelection' will always fail the
!isset check when the
> form is submitted since the default value is "None", and
therefore always
> set. :-)
>
> So how about this..?
> <?php
> if (isset($_POST['send']) and
($_POST['productSelection'] == "None"))
> {echo "Please select a product.";}
> ?>
>
>
>
>
> "Webethics" <[email protected]> wrote
in message
> news:[email protected]...
> > Another question - how do i applied the code you
just showed me to
> > select
> > menu
> > or select list?
> >
> > This is the list:
> >
> > <div class="problemProduct">
> > <label for="productSelection"><span
class="product_label">Product
> > Name.</span></label>
> > <select name="productSelection" id="products"
class="selection">
> > <option value="None">-------------Select a
product----------</option>
> > <option value="Everex DVD Burner">Everex DVD
Burner</option>
> > <option value="Vidia DVD Burner">Vidia DVD
Burner</option>
> > <option value="Excerion Super Drive">Excerion
Super Drive</option>
> > <option value="Maxille Optical Multi
Burner">Maxille Optical Multi
> > Burner</option>
> > <option value="Pavilion HD Drives">Pavilion
HD Drives</option>
> > </select>
> > </div>
> >
> > I thought I could just change the name is the code
from operatingSystem
> > to
> > productSelection.
> >
> > Something like this:
> >
> > From this:
> >
> > <?php
> > if (isset($_POST[send]) and
!isset($_POST['operatingSystem']))
> > {echo "Please select an operating system.";}
> > ?>
> >
> > To this:
> >
> > <?php
> > if (isset($_POST[send]) and
!isset($_POST['productSelection']))
> > {echo "Please select an operating system.";}
> > ?>
> >
> > But this does not work, any ideas?
> >
> > Patrick
> >
>
>
>
>
> Hey, I tried this about but as you mentioned, since the
default product
> value
> is "None" an error message appears when the page loads.
>
> Is there a way to code this things so that even though
the default value
> is
> "None" there ia no error message untle you hit the
submit?
>
> When I applied the code, it messes up the previous code,
now the operating
> system is requiring an entry on page load.
>
> When I remove the code from the list menu everything
goes back to normal.
>
> I know this is a little much but I have no other
alternatives.
>
> Patrick
>

IWeb images and nav menu not displaying in IE

Hi all,
I've just created my second IWeb page: http://web.mac.com/benbruder/iWeb/Ben%20and%20CC%27s%20Garden/Welcome.html
It displays fine on my MacBook Pro, and loads fine on a PC, but when the page finishes loading, the images and navigation menu both disappear.
Any thoughts?
Thanks much,
Ben

Just figured it out from reading the other posts--having an apostrophe in the title killed the page. When I took the apostrophe out, everything worked.
--Ben

Language conversion IS Oil and Gas Menu

Hi Gurus,
Can anyone help me to understand how to get LANGUAGE SPECIFIC IS oil and Gas menu when we log in a specific language other than english. Right now i am able to view ECC 6.0 Menu in other SPECIFIC LOGIN LANGUAGE but IS Oil and Gas related menu and objects still appear in English.
If anyone has done similar activity can guide please..
Regards

1. ERP 6.0 and higher, you donot need a separate box. Lower releases need a separate box.
2. Please check help.sap.com for IS-OIL. In general SD and MM processes in Oil&Gas are important. Also Oil&Gas specific things like Commodity pricing,Quantity Conversions, exchanges, transportation are imporant.

NO iPhoto Library showing in Desktop and Screensaver Menu in SL

Hi experts,
I have experienced a problem after I updated to SL last night.
I made a fresh install of both SL and iLife 09 on my mbp unibody late 2008.
Afterwards, I replaced the my fresh iphoto library simply with my old iphoto 09 library from time machine (no migration tool, only copy pasts).
But now I recognized a problem that I see no iphoto library in my Desktop and Screensaver Menu in control panel. I cant set iphoto library photos as screensaver cause I cant see them
Does anyone have a solution for it? or does anybody face the same issue?
Thanks!!!

I have the same thing. I wiped everything clean and installed Snow Leopard/iLife '09/etc. I run my iPhoto lib from an Airdisk and I just set iPhoto to point to that same library on the wireless disk. Everything works fine, except I can't set iPhoto pics as my desktop. I see a label for iPhoto (just like when it used to work) except there's no arrow by it and it's empty. If I plug the computer straight into the disk and use the same library, it works fine. Any thoughts?

Cockpit and My Menu

Similar Messages

Maybe you are looking for