I have dual displays. My dock is on the MBP bottom and the menu bar is on the extended monitors top.

I have a Dell 2408 acting as the main display and a 15" MBP. For some reason, today the dock ended up on the MBP screen at the bottom and the menu bar is on the Dell at the top. I can't seem to move the dock back to the Dell. Can someone help? I tried moving the menu bar to the MBP and then back, hoping the dock would follow but no luck.
Thanks for your help.

When the dock is defined as on the bottom, it will appear on the screen of the extended desktop that is lowest.
Move the second monitor where the bottom edges are equal or the Dell is lower and the dock will move there.
Regards,
Captfred

Similar Messages

HT5706 I have not used my apple tv in a few years, and just got it out of the bag. I connected it up, and it cannot set date, time. it also does not interact with the remote. Could it be as simple as a new batter is needed for remote?

I have not used my Apple TV in a few years, and just got it out of the bag to use on a new TV. I connected it up to power and with an HDMI cable toTV. It attempts to set date and time and cannot. I cannot get the remote to interact with the box also. Could it be something as simple as needing a new battery?

Hi kybriar,
Thanks for using Apple Support Communities. This article has steps you can take to troubleshoot the remote itself:
Troubleshooting the Apple Remote
http://support.apple.com/kb/ht1722
For the issue of setting the date and time, these articles may help:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Reset Apple TV by unplugging it from the power outlet, waiting about five seconds, then plugging it in again.
Power off your TV, wait five seconds, then power it back on.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connectionshttp://support.apple.com/kb/TS4546
Ensure that Apple TV is within range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and cable/DSL modem are connected to power and turned on.
Make sure other devices (computers, iPhone, iPad, for example) are able to connect to the Wi-Fi network and access the Internet.
Check your Wi-Fi network settings on Apple TV:
Select Settings > General > Network > Wi-Fi and press the center button on the remote to display nearby networks.
Choose your Wi-Fi network from the list.
If your Wi-Fi network uses a password, make sure you are entering it correctly.
Restart your Apple TV by selecting Settings > General > Restart.
Try restarting your Wi-Fi router or modem by turning it off and then on again.
If possible, connect an Ethernet cable and verify your Internet connection. If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by selecting Settings > General > Software Update. If your Apple TV can be updated, install the update and then try the steps again.
Cheers,
- Ari

I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that it needs to connect to iTunes. iTunes says my phone needs to be restored before it will work with iTunes. HOw do i avoid restoring?

I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,

I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

MacBook 2008 10.6.8 no dock and no menu bar

MacBook4,1 (13 inch 2008 model)
OS: 10.6.8
No OS operating disc or bootdisk
I am rewriting/submitting this question as I didn't think the original title was helping my cause:
I have an older macbook (white macbook4,1) without any boot disc or OS disc. Currently using 10.6.8 OS. As the Administrator, I can log in and do get a dock and menu bar. All seems okay. However, this is my childs computer and when she is able to log in, but the only thing that appears is a blank screensaver screen. There is no dock or menu bar. Only the cursor appears. Again, I do not have any discs as I purchased this sometime ago and it was a used macbook and didn't come with any discs. BTW, this just recently occurred as she was able to use normally and as far as I know, nothing was downloaded knowingly that caused this. We've been using 10.6.8 OS for sometime now on this unit. Thank you
Macbook4,1 (13 inch, 2008)
Current OS: 10.6.8 (no original discs)
MacBook, Mac OS X (10.6.8), no original bootdisc

You will need to purchase the retail copy of Snow Leopard:
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Any suggestions?

I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
Any suggestions?

Dear all,
(THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
RUN A FULL BACK UP BEFORE DOING ANY OF THIS
1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
2. Connect your iPhone 4S to iTunes.
3. Once connected, two options will show: ‘restore’ and ‘check for update’.
4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’ (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
A full back up is recommended before firmware upgrade.
HOPE THIS HELPS

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

HT4914 My wife and I both have iPhones and iPads. Can we both have access to the same iTunes Match library or do we have to have separate subscriptions? Our devices are synced to the same computer and we currently download titles from the same library.

My wife and I both have iPhones and iPads. Can we both have access to the same iTunes Match library or do we have to have separate subscriptions? Our devices are synced to the same computer and we currently download titles from the same library. We both use separate apple id's on our devices.

You need to reconfigure your phone for use with your Apple ID. I suggest you restore yours as new then reconfigure it with your information and Apple ID. Be sure to disable Find My Phone, if it's enabled, before proceeding.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.

First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

HT1977 I did this and a bar showed up at the bottom and now I cant click on the apps and cant transfer them. Please help because I have accidently deleted the App store from my i pad 1. I am not very technoligically advanced so please respond in a noncomp

I synced my ipad to my itunes store on my computer and a bar showed up on the bottom of the screen showing how many gigabytes i was using. Now i cant click on the screen to move the app from itunes to my ipad for some reason, or my movies/ music for that matter either. The real reason i am doing this is because i accidently erased the app store and dont want to erase all the apps i already have on their. So if someone can help me get the app store or fix the syncing problem that would be great because i use it for school which requires certain app be installed. Please respond quickly!

Jimmyt97 wrote:
Now i cant click on the screen to move the app from itunes to my ipad for some reason, or my movies/ music for that matter either.
What are you talking about?

I am currently managing 20 iPads on a macbook. I would like to manage the same 20 iPads on a new macbook pro. I have logged into the iTunes account on the new machine and see our apps but not the devices. How do i get the devices to be shown on new comp?

I am currently managing 20 iPads on a macbook. I would like to manage the same 20 iPads on a new macbook pro. I have logged into the iTunes account on the new machine and see our apps but not the devices. How do i get the devices to be shown on new comp?

Has anyone used apple cpnfigurator for this purpose?

I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

I did call apple care and they guided me through everything.. they said it was the hardware
I was given this phone last year as a present
i know, it was not new.. so it could have been on an other cell provider i am not sure if it was so at the moment that is all i can do

What is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?

what is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?

what is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?

Hey guys I seriously need help... I just got my iPad 3 delivered the before yesterday and yesterday i was going though the AppStore and found some app called "performamce test and I ran the test and that apps tell me I have poor 3d perfoamce. *worried* :(

Hey guys I seriously need help... I just got my iPad 3 delivered the before yesterday and yesterday i was going though the AppStore and found some app called "performamce test and I ran the test and that apps tell me I have poor 3d perfoamce. *worried* :( I've been up since tomorrow. Could you install that app and tell me what scores do you guys get? :(

http://www.google.com.pk/url?sa=t&rct=j&q=performance%20test%20mobile%20itunes&s ource=web&cd=2&ved=0CGYQFjAB&url=http%3A%2F%2Fitunes.apple.com%2Fus%2Fapp%2Fperf ormancetest-mobile%2Fid494438360%3Fmt%3D8&ei=cOf_T-r2AuzT4QSpv4zBCA&usg=AFQjCNGi c8vn6zl8AINqrYuNc2RYobSiVA
Here's the link.

I have dual displays. My dock is on the MBP bottom and the menu bar is on the extended monitors top.

Similar Messages

Maybe you are looking for