Code 43 help

Every time I plug my iPad into the computer it says USB device not recognized. I feel like I tried everything and nothing seem to work. I want to update my iPad but I can't because of this. The computer says its code 43. I don't want to buy a new iPad so can somebody help me please

Isn't it a little early to be talking about buying a new iPad? You can Google "error 43", as only you know what OS you are operating there.
A shot in the dark - clean out the docking connector on the iPad (you don't say what model you have either). There's a reasonable chance the problem is no more than a bad connection.

Similar Messages

Program for t-codes -kindly help

dear friends,
i am in need to know abap programs to the t-codes. for example for creation of sales order (va01), there is a program called SAPMV45A. similar to that i want programs for t-codes in mm.
creation of material master- mm01/mm02/mm03
vendor master xk01/xk02/xk03
info record me01/me02/me03
RFQ   ME41/ME47/ME49
purchase request me51n/me52n/me53n
po       me21n/me22n/me23n
GR   MIGO
INVOICE VERIFICATION :- MIRO
is there any other method to see the program for the corresponding t-codes.
kindly help.how to see the programs in sap
regards,
flemmings

Hi,
If u want to see the program enter the t code in command field and then go to system (on top) and then status u will get details of program.
Thanks
suresh

I have a compilation problem with my mini iPod that is preventing my volume from increasing. I can't get the compilation code, please help me

MY mini iPod version number1.1.3 pc robs iPod ,4GB is having volume limit problem ,the volume is very low compare to how it was playing before I mistakenly touch the combination code. I have forgotten the combination code, please help me out.. I have tried to reset settings but it wouldn't work.

i can get the combination code please

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My macbook is blocked by pin code, please help, I dont know what to do!

My macbook is blocked by pin code, please help, I dont know what to do!

When you enter iTunes on the PC and the iPod icon pops up, right click on it and select "Options". Then click on the Music tab. Once you're in the Music tab check the box that says "Enable Disc Use". This means that you've just turned your iPod into a portable hard drive. Click "Ok" and move your iPod from the PC to the Mac. From there, your iPod should show up on the Mac's desktop right under the Hard Drive icon. Click "File" at the top of the screen and select "Add to Library". Find the iPod hard drive in the selection screen and choose the music folder that's on it. Then just click Ok and all your music will be downloaded. That should do the trick, but you might want to do a Google search on the subject to get a second opinion. Best wishes!

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

Window freezes when Product category selected via match-code (search help)

Hello Experts,
I am using SRM 7.0 Extended Classic Scenario.
I maintained a product category hierarchy in the SRM environment.
I maintained the GL Accounts related, the tax determination, the source system etc.
I did all this customizing in a Development environment where everything was working fine.
Now I just transported all this to a Quality environment.
And in the Quality I am facing the following issue :
If I select a product category via the match-code (search help), after the category is selected, the window freezes.
I have to shut it down manually using the Windows Close button.
However, when I type the category number, everything works fine.
Do you have any idea what could be causing this issue, and how to fix it ?
Thanks in advance,
Sofiane

Hello,
We have the exact same issue in SRM 7.0 Extented Classic Scenario. This was working fine before we installed the latest support package 11. Which support package do you have?
The same problem occurs with every drop down menu (search help) in EBP. For example when creating a new shopping cart, if I try to add approver, the same thing happens. After clicking 'Approval Process: Display / Edit Agents' > 'Add Approver', the window freezes. Same thing happens with IE8 and Firefox 3.6.13. Could you also try the same?
Could it be a new bug in SP11?
Thanks and best regards,
Matti Hokkanen
Edited by: Matti Hokkanen on Nov 4, 2011 10:30 AM
Edited by: Matti Hokkanen on Nov 4, 2011 10:43 AM

How to explicitely write PLSQL code for "Help - Display Error"? [SOLVED]

I'm using menu DEFAULT&SMARTBAR and I'd like to write command in PLSQL code for "Help - Display Error" to display error. Has anyone any idea how to do this? I can not find syntaks in form help for this.
Message was edited by:
marussig

Display_Error;

I have tried everything to correct Error Code 16 Help!

I have tried everything to correct Error Code 16 Help!

Hi leolion,
You might want to refer the KB Doc: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Regards,
Rave

HT201304 ello my little brother has developed lock my iPhone and I could not see the unlocking code Please help and thank you

Hello
ello my little brother has developed lock my iPhone and I could not see the unlocking code Please help and thank you
edited by host

Hi Omar_a983,
If you are having an issue with the passcode on your iPhone, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

I can't find my redemption code, please help!

I can't find my redemption code, please help!

You have purchased Creative Cloud Photography plan on Sept. 26, 2014.
If the CC is asking for serial number then please follow the steps in http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
To download the CC purchased you need to install &activate it. Please refer to
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Download and Installation Help
Hope it resolves your issue.
Regards
Rajshree

BADI FOR WITHHOLDING TAX CODES SEARCH HELP

HI,
Is there any BADI for witholding tax code search help. i want to make some changes in it.
field: WITHT
Pls help.

Please find the following BADIs which are called during the transaction FB60.
BADI_FDCB_SUBBAS01
BADI_FDCB_SUBBAS02
PPA_CUST_BADI
BADI_FDCB_SUBBAS03
BADI_FDCB_SUBBAS04
BADI_FDCB_SUBBAS05
What release are you on? I have the same issue for 1042s, but here are some helpful links for turning on the extended withholding tax:
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
Defining withholding tax codes:
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
Reward points if found helpful....
Cheers,
Chandra Sekhar.

Am having problems buying app from App Store ... It's not recognizing my credit card security code... It's says " incorrect code" any help pls wot do I do

Am having problems buying app from App Store ... It's not recognizing my credit card security code... It's says " incorrect code" any help pls wot do I do

This can be caused by a few things.
      Make sure the billing card address, the one on the statement is the exact
             same as in iTunes.
      Note even the zip code being off can cause this.
       Try a different CC
      and the way the always works
          An iTunes GC.

Logical error in code, please help, thanks alot.

I have this file Socks.java which reads in a file containing information about a sock drawer. The file is of the format:
11
red athletic
green casual
blue athletic
blue athletic
red athletic
so when the program runs, it is supposed to output the socks that are pairs: so it would output
1 pair red athletic
1 pair blue athletic
my code compiles and runs fine and i am testing it with println statements, but I am not getting the desired ouput. Can someone look over it and see if they spot what is wrong. Right now in the code I am seeing what the value of socks[i] and socks[j] is by printing them out as you will notice. If anyone can help, I appreciate it. Thanks so much for all your wonderful help
Here is the code:
import java.io.*;
public class Socks {
public static void main(String args[])
try
String socks[] = new String[1000];
int pairs[] = new int[500];
int numOfsocks;
int i;
int j;
FileReader fr = new FileReader("test.txt");
BufferedReader inFile = new BufferedReader(fr);
numOfsocks = Integer.parseInt(inFile.readLine());
int possiblePairs = numOfsocks/2;
//System.out.println(numOfsocks);
//System.out.println(possiblePairs);
for(i = 0; i < numOfsocks; i++)
socks[i] = inFile.readLine();
//for(i = 0; i < numOfsocks; i++)
//System.out.println(socks);
for(i = 0; i <= possiblePairs;i++)
for(j = i; j <= possiblePairs;j++)
System.out.println(socks[i]);
System.out.println(socks[j]);
//if(pairs[i] >= 2)
//System.out.println(pairs[i]/2 + " pairs" + socks[i]);
inFile.close();
catch(IOException e){}
          System.out.println("File Not Found or no File Specified");

Try the following quickly revised version of your code.
import java.io.*;
public class Socks {
public static void main(String args[])
try
    String socks[] = new String[1000];
    int pairs[] = new int[500];
    int numOfsocks;
    int i;
    int j;
    FileReader fr = new FileReader("test.txt");
    BufferedReader inFile = new BufferedReader(fr);
    numOfsocks = Integer.parseInt(inFile.readLine());
    for(i = 0; i < numOfsocks; i++)
      socks[i] = inFile.readLine();
    for(i = 0; i < numOfsocks; i++)
      if (socks[i] != null)
        pairs[i]++;
        for(j = i + 1; j < numOfsocks; j++)
            if (socks.equals(socks[j]))
pairs[i]++;
socks[j] = null;
System.out.println(pairs[i]/2 + " pairs " + socks[i]);
inFile.close();
catch(IOException e){
e.printStackTrace();

Trying to set download apps...says it needs my credit card info...I put it in....but then it won't take it because it says I need to enter my zip code. I live in Canada and have a postal code, not a zip code. Help

I am trying to set up my new Iphone 4 and download apps. I made an Apple Id which is all good. But when I try and enter in my credit card info it keeps asking for my Zip code and state. I live in Canada not US. I changed the phone to Canadian but it still keeps asking for it and won't let me put in my right information which in turn won't let me download any apps. Can anyone help?

Postal & Zip codes are same. Just enter postal code without space. It will accept.

Files opening in unreadable code need help urgently please

When I was given my new Toshiba laptop as a gift in 2007 Microsoft Office with Word and Excel etc were already set up so I do not have any discs or keycodes. .Being a senior person, it is also possible that my son who gifted it to me may have installed the above mentioned discs to help set me up, but he does not have any recollection of this, except that he gave me the Toshiba Recovery Disc which I do have.
My laptop had to go back to Toshiba some time ago for a Manufacture- related issue. They also informed me that some of my files were corrupted. All features remained on my computer as prior to repair, so nothing was lost or had to be re-loaded.
I have found that since then all my docs are opening in code form and are unreadable. Microsoft Word seems to have disappeared and I have had to install an old Microsoft Works 2001 disc in order to be able to work on new documents. Microsoft Onenote was on the disc but not Word, so the docs will not open with Onenote, so I am stuck.
Is it possible for me to find out if Toshiba holds the keycode to my original Microsoft Office and would I be able to download it again.? I cannot afford to buy a full new Office system and I have no way of knowing which Microsoft Office ( 2007? )created the documents. I have to know if there is any way I can read these documents and also to establish which of them may be corrupted so that I can delete them. Would a system restore make the documents readable? I am very untechnical minded with regard to computers as you can observe from my wording and would really appreciate any help you can give as I cannot afford to pay someone who keeps my computer for a day or more and then charges me an extortionate amount.
Thank you so much in advance if you can help me in any way with easy to follow instructions/advice.

What is the model number of your laptop?
A Trial version of MS Office may have been pre-installed. If you activated Office (Purchased a license), then you could try calling Microsoft to re-activate it.
If you reinstall Windows using your Toshiba Recovery Disc, the Office installation should be installed. (Note that the Recovery Disc will delete your data, so back up your files first).
Alternatively, you could use OpenOffice to read your documents. OpenOffice (free) works with Microsoft Office files.

Code 43 help

Similar Messages

Maybe you are looking for