Code de security

hi it's allan l m from drc (congo) and i need yr help please. l hav nokia C1  01 and l forgot the security password l dnt knw hw can resolve this problem. please show me the mans can i do? thnxs  
MODERATOR'S NOTE: We have edited your post as it contains an attachment that is not a support issue. Thank you for understanding.

Probably need to take the phone to a service centre to have them reset the phone to factory defaults. Obviously you will loose all your data.

Similar Messages

  • Transport  of code based security

    Hello,
    we have WAS 6.40 and we have a lot of differents views in the key storage services, and also a lot of entries in everyone. We granted the domains to every different view and entry, so we have a lot of rules of code based security with differents domains-views-entries.
    The problem is that we want to transport that configuration of code security of the WAS 6.40 from our development enviroment to production enviroment and we don't want to recreate by hand all the code based security, because is a lot of work. Anybody knows how to transport the assigned code domains of every view to the production system? When we save the view, the code domains isn't saved in the file.
    Thanks a lot,
    Daniel Sutil

    Yes, your main security is based on Enterprise groups. This way if something changes on SAP end, group disapears etc.. Your BO security is intact.
    As sub members of Enterprise group SAP group/role will inherit all the parent security.
    On deleting the groups, I think you have to unmap them from SAP page in Authentication.....  Haven't played with that part much, sorry.

  • Je ne me rappel plus de mon code de securité

    je ne me rappel plus de mon code de securité. Comment rentrer dans mon iphone?

    Alexandraren, you may want to switch to your country's Apple support site. Some of us do not understand other languages, you will get more support on your country's site.

  • Code of Security of mi nano does not recognize

    Hello, when trying to put the code of security of my ipod this does not recognize my new one I code to me, already I gave reset him but even it follows without responding, that I can do?
    Thanx

    Hi Miguel,
    Not quite sure if I understand your question but here is a link to 'Secure My iPod' on the iPod 101:
    http://www.apple.com/support/ipod101/maximize/5/
    Hope that helps.
    Seasons Greetings,
    Colin R.

  • ABAP Code Inspector & Security

    All:
    I am currently looking into the Code Inspector that is built into SAP that allows developers to run test/checks on their code related to performance, syntax, and as noted "security". I am trying to track down what exactly the "security" is being checked. I am running tests on my internal SAP systems to see how it acts, but I wanted to get any feedback from the security community on a few things
    1) What "security" checks does the Code Inspector actual check for?
    2) Is there an location with updated documentation from SAP (not dated 2002) which speaks to the security componet, not just mentioned it?
    3) Any useful use-cases within the security community that your organization/clients are using?
    Thanks,
    Matt Urban

    Hi,
    if you display a check variant in SCI there is info linked to each node (icon with I). For example calling C-routine is a security risk. Also dynamic statements are good example of security risk. You need to validate input properly before executing dynamic statement. Not sure about documentation but documentation available in SCI seems OK to me.
    On one project we used SCI to check any custom development (not only security). It helped us to increase quality of custom development. Especially, with less skilled developers.
    Cheers

  • How to get domain name in java code/custom security provider

    Hi all,
    I've developed a custom security provider and deployed it in WL_HOME/server/lib/mbeantypes folder. I also have multiple domain created and running in the same machine. now if a user logs in from a specific domain, say, t3://localhost:7005, how do I retrieve the domain name in my custom security provider?
    I found the following code could do it, but this code needs to know the port number in advance
    Hashtable env = new Hashtable();
    env.put(Context.PROVIDER_URL,"t3://localhost:7101");
    env.put(Context.INITIAL_CONTEXT_FACTORY,
    "weblogic.jndi.WLInitialContextFactory");
    env.put(Context.SECURITY_PRINCIPAL,"weblogic");
    env.put(Context.SECURITY_CREDENTIALS,"weblogic1");
    Context ctx = new InitialContext(env);
    MBeanHome home = (MBeanHome)ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
    String domainName = home.getDomainName();
    System.out.println(domainName);
    Any help is greatly appreciated...
    Thanks,
    Philip
    Edited by: VivaCuba on Nov 14, 2010 9:43 AM

    Check out methods in the following classes: LegacyDirectoryLocator and DirectoryLocator.
    Jonathan
    http://jonathanhult.com

  • Signed code vs security manager

    i've seen tons of information on how to implement a security manager, and tons of information on signed code, but i haven't found information about WHY you choose with one over the other.
    we are implementing security is a very large desktop app.

    It's not an either/or decision. You can use both. If you use code signing and a security manager you can get more fine-grained control in your .policy file.

  • Code for secure WebService

    Hi All,
    I am using Weblogic App. Server and I want to write code for encrypting the data sent through the Java Web service. I am new to this so can anyone please tell me the steps for that? If you have working code for that, it will be of great help. Its very very urgent for me.
    Thanks,
    Radhakrishna

    helping you would compromise security, so no we can't help you.

  • Nokia 5610 Lost unlock code ( not security code )

    I buy nokia 5610 and set password guard for keyboard. I press incorrect. I has not change security code ( 12345 ) Please help me. Now I only used answer any call .... huhuhuhu
    Message Edited by geronimo on 02-May-2008 06:53 AM

    if you haven't changed the security code then the unlock code should be the same....
    I don't understand why you are saying that the default code ain't working!!
    It should work..
    !!!OHOO!!!

  • JVMTI and instrumented unsigned code opens security hole?

    I wonder if someone has tested this before ... I use a framework like e.g. bouncycastle (or anything other security relevant) which is signed and no one should ever manipulate the contained *.class files (hence this is signed?). So it is possible (I think) to write an agent which hooks the classload event and injects some "evil" bytecode in lets say ... a encryption implementation (which could break security mechanisms).
    On *.class level (in the jar file) the security is given, manipulations can be detected by verifying signed jars. But what about raw bytecode injection at runtime? Does the VM distinguish between signed and unsigned bytecode? Or does the user probably not even know that the "private data" he enteres at a java program is not encrypted by the "original" bouncycaste *.class?
    Thank you for ideas ;-)
    (assume that placing an "-agent" commandline and *.dll is not impossible on desktop applications)

    Did you repair permissions after updating?
    If your Safari keeps crashing, or if you are updating Safari (or just have):
    Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    (Trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail, Dashboard widgets etc also rely.)
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-on that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.0.4.
    You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed the correct version for your Mac of Security Update 2008-001.
    As Leopard also uses Safari 3.0.4, much of the above may well also apply to Leopard, but is not guaranteed.

  • Mac OS X Server 10.8 and Wiki Code Snippet Security Settings

    I want to disable the embed security settings in Server's Wiki Service because with the default settings you can't embed anything on to pages, which makes it a lot less useful.
    I know to do this you change:
    /Library/Server/Wiki/Config/whitelist.plist
    but I'm not sure how to change it to allow all types of embeds. I'm aware of the security risks but I trust my users on this Server to embed what they need to embed.
    Message was edited by: takpschool - text truncated in title after ampersand

    I found the Lion Server Advanced Admin Guide which mentioned changing the key  `FiltersEnabled` to `False` `/etc/collabd/collabd.plist`.
    Once I figured that this plist has been moved to /Library/Server/Wiki/Config in Mountain Lion Server from /etc/collabd/ in Lion Server I changed the preference - and we can embed to our hearts' content.

  • Code access security for SSRS 2012 extension?

    I have a SSRS 2012 IAuthenticaitonExtension that I am trying to get up and running.
    Currently, it blows up trying to load one of 3rd party required assemblies.  How do I configure SSRS to allow .NET to load my DLL's?
    Failed to initialize the AppDomain:ReportManager_MSSQLSERVER_0
    Exception: System.Web.HttpException
    Message: Could not load file or assembly 'Castle.Windsor, Version=3.3.0.0, Culture=neutral, PublicKeyToken=407dd0808d44fbdc' or one of its dependencies. Failed to grant minimum permission requests. (Exception from HRESULT: 0x80131417)
    StackTrace:    at System.Web.Compilation.BuildManager.ReportTopLevelCompilationException()
       at System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled()
       at System.Web.Compilation.BuildManager.CallAppInitializeMethod()
       at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters)
       at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters)
       at System.Web.Hosting.ApplicationManager.CreateAppDomainWithHostingEnvironment(String appId, IApplicationHost appHost, HostingEnvironmentParameters hostingParameters)
       at System.Web.Hosting.ApplicationManager.CreateAppDomainWithHostingEnvironmentAndReportErrors(String appId, IApplicationHost appHost, HostingEnvironmentParameters hostingParameters)
    InnerException: System.Configuration.ConfigurationErrorsException
    Message: Could not load file or assembly 'Castle.Windsor, Version=3.3.0.0, Culture=neutral, PublicKeyToken=407dd0808d44fbdc' or one of its dependencies. Failed to grant minimum permission requests. (Exception from HRESULT: 0x80131417)
    StackTrace:    at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective)
       at System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory()
       at System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai)
       at System.Web.Configuration.AssemblyInfo.get_AssemblyInternal()
       at System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig)
       at System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName)
       at System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp)
       at System.Web.Compilation.BuildManager.CompileGlobalAsax()
       at System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled()

    Hi scott_m,
    According to your description, you want to load 3rd party assembly into SSRS. Right?
    In Reporting Services, if we want to use the custom/3rd assembly, we need to copy the .dll file into
    C:\Program Files\Microsoft SQL Server\MSRS12.MSSQLSERVER\Reporting Services\ReportServer\bin
    C:\Program Files (x86)\Microsoft Visual Studio 9\Common7\IDE\PrivateAssemblies
    C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies
    Then add the assembly as Reference in Report Properties.
    If the assembly requires additional permission, we need to modify  
    Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer\rssrvpolicy.config
    file
    For more information, please refer to the KB article below:
    How to use custom assemblies or embedded code in Reporting Services
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • HT5047 I've just downloaded ver 7 operating software AND ENTERED A SECURE CODE FOR THE PHONE NOW I CAN"T USE IT TO OPEN  A MESSAGE FROM FACE BOOK

    I just downloaded 0s 7 ser a code for security and when i recieved a nessage from facebook and was asked to enter the code it would:nt work and finally locked my phone. Help!!

    Reinstall Safari 5.1.1
    If that doesn't help install the Mac OS X 10.6.8 Update Combo. It's ok to do this even though you are already running v10.6.8.
    Restart your Mac after installing software.

  • Error code: 3194 when restoring.. "Secure link to iTunes store failed" when diagnostics is ran..

    as mentioned in the title, I have encountered 2 errors, one is when I am trying to restore my iphone and the other when iTunes diagnotics feature is ran..
    I have read the information about the diagnostics result and saw something like "connection attempt to firmware update server unsuccessful". Because of this information I have concluded that the "error code 3194" happens because iTunes itself is unable to connect to the "firmware update server".
    I am using Windows 7 64-bit and iTunes is now on the latest version.
    below are the things I have done so far, but to no avail:
    - removed/disabled my antivirus program
    - put iTunes to exception list of WIndows Firewall
    - disabled windows firewall and windows defender
    - re-installed iTunes and made sure that it is of the latest version (version 10.6.1)
    - performed recommendation from: https://discussions.apple.com/message/17409780#17409780
    - perform flush dns command using command prompt
    In addition to the steps I mentioned, I also tried running the diagnostics on two other computers running on different versions on iTunes, 10.5 and 10.6.0. I also did the same steps as above on these two computers, but I am getting the "secure connection to iTunes store failed" when the diagnostics were ran.
    thanks for any help that you can give.

    I think its weird that I experienced both the 3194 error code and "secure link to the itunes store failed" diagnostics error on three computers running on different OS (XP, vista and 7), itunes version and connectivity types (wireless and cabled). Could it be possible that there is a problem on Apple's server?
    Are you still there, shintenhouji?
    Perhaps try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (I've seen a few cases in recent times of this sort of thing being associated with LSP issues.)

  • Nokia 500 Security code error

    Yesterday I switched on my Nokia 500 with pin code and security code with out any trouble,but after few minutes  it restarted and security code is not accepted, ,I can answer the incoming calls, but i cant connect it to nokia suit help me with this ,

    The default is 12345 have your tried that?
    If you cant fix this it will have to sent to a nokia care point.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for