Code for selection screen, urgent

Hi Everyone,
I need code for selection screen.
I have four radio buttons, p1, p2,p3,p4(assume)
If I select second radiobutton, remaining three radiobuttons should be in disable mode and also the information under them should be in disable mode. Give the coding details. Thanks in advance. U will be rewarded.
Regards,
Nagaraju

Hi,
REPORT ZTEST222 .
PARAMETERS : p_add RADIOBUTTON GROUP radi
                         USER-COMMAND radio MODIF ID MOD,
p_disp RADIOBUTTON GROUP radi DEFAULT 'X' MODIF ID pod,
p_chng RADIOBUTTON GROUP radi MODIF ID rad,
p_er_log RADIOBUTTON GROUP radi MODIF ID cod.
SELECT-OPTIONS : s_idn    FOR vendor   MODIF ID mod,
                               s_pcode FOR ws_c_pcode MODIF ID pod.
PARAMETERS: p_plant    LIKE zaw_pol_plan-plant   MODIF ID rad,
             p_zzvend   LIKE zaw_pol_plan-zzvendor   MODIF ID cod.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_add EQ 'X'.
      IF screen-group1 EQ 'MOD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_disp EQ 'X'.
      IF screen-group1 EQ 'POD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_chng EQ 'X'.
      IF screen-group1 EQ 'RAD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_er_log EQ 'X'.
      IF screen-group1 EQ 'COD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
Pls. reward if useful
    ENDLOOP.
Pls. reward if useful

Similar Messages

Creating Transaction code for selection screen of one ztable

Hi ,
    i have one Ztable in order see the data in it , he wants one new transaction . by executing tht transaction he wants to view the data inside the table.
i have created one transaction code by taking the transaction type as report transaction and program name i gave the selection screen program of tht table.
when i executed tht t code selection screen of table contents should come and on executing it i have to get data.
but im not getting data on executing tht selection screen .
why? for this scenario which tcode type i have to select.

Hi Pavan,
Check this,
Step 1
Create parameter transaction (i.e. via SE93)
Select the fourth options
Step 2
Enter transaction details. Within the Proposed values section there are a number of value which
can be setup, simply use drop down menu to view the list. The 2 values assigned in the following
example are as follows:
               VIEWNAME:        Set table name to maintained
               UPDATE:               Open table for update
Mohinder

Code for selection screen

hi all,
in selectin screen i have to populate two fields VIQMEL-KDAUF(sales order) & VIQMEL-QMNUM( shop visit notification),
here i have to give any of the inputs.like, if i give the SALES ORDER as input, SVN should be retrived& if SVN is given as input SO should be retrived.
depending on the given input the second input also should be retrived and passed to others as input.
can any one send me the code for this..i need it immediately.

Hi,
Tables: viqmel.
Data: begin of it_itab occurs 0,
           ls_qmnum like viqmel-qmnum,
           ls_kdauf like viqmel-kdauf,
        end of it_itab.
select-options: s_qmnum for viqmel-qmnum,
                       s_kdauf for viqmel-kdauf.
select QMNUM KDAUF
           from VIQMEL
           into table it_itab
           where qmnum in s_qmnum
           OR kdauf in s_kdauf.
loop at itab.
write: /it_itab-ls_kdauf, it_itab-ls_qmnum.
endloop.
Reward pts if helpfull

How to write HTML code in Web Template for selection screen

Hello All,
Is it possible to write a html code in the web template html tag so that the output of the html is displayed in the selection screen, i.e before the execution of query.
I know that we can write html, which will be displayed once the query has been executed, but can it be done for selection screen.
if so, how.
My exact requirement is : to display a 2-3 lines of text in the selection criteria screen - sort of, various options available to user for entering values in the selection screen. I was thinking of putting this text using HTML code in the selection screen.
Regards,
Nagendra.

Hi Erick,
No, unfortunately nobody replied to this thread. So i assumed it is not possible to modify the selection screen thru html code.
Btw, as my requirement was to provide user with multiple answers on the selection screen. I did the validations on customer exit and popped an errror dialog when applicable.
Regards,
Nagendra.

Infoset query ('At Selection-Screen') - Urgent

Hi All,
The below code for selection criteria 'At Selection-Screen' for an infoset-query works ok, but i find 2 problems, can someone help.
1. When user presses F4, i wanted the output to display
   SG Singapore
   IN   India
   But at the moment it just displays
   SG
   IN
2. If the user enters any other value apart from the above 2 i do not want the query to execute, instead show something like enter a valid value. But at the moment if i enter another country code manually just to test eg: US, the query runs with this selection which i do not want.
Hope my problem is clear, await inputs.
Code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR VEN_CTY-LOW.
        IT_LAND-VEN_CTY = 'SG'.
        IT_LAND-LTEXT   = 'Singapore'.
          APPEND IT_LAND.
        IT_LAND-VEN_CTY = 'IN'.
        IT_LAND-LTEXT   = 'India'.
          APPEND IT_LAND.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD   = 'VEN_CTY'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = IT_LAND
      RETURN_TAB = IT_RETURN
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2.
IF SY-SUBRC = 0.
    READ TABLE IT_LAND INDEX 1.
    MOVE IT_RETURN-FIELDVAL TO VEN_CTY-LOW.
ENDIF.

Hi vivek,
for the 2nd problem,
create a range for ingapor and india say r_range.
and
r_range will have two values say india, singapore.
loop at VEN_CTY.
if ven_cty not in r_range.
display error message.
exit.
endloop.
try this and let me know.
reward if helpful.
thanks .
ranya

Dinamic variant for selection screen

Hi,
I got a requirement where i need a Dynamic variant for selection screen .There is a date field in the selection screen i want to create a variant such that when i choose it,it should give the current day date in selection screen.can anyone help me.
Regards,
Ravi

Hi,
Using Customer Exit code you can give it.
Create a Customer Exit Variable and write simple code in CMOD. See the usefull Exit code for reports in the following url.
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
WHEN 'ZV_DAT'.
    IF i_step = 1 .
      CLEAR l_s_range.
      l_s_range-low = sy-datum.
      l_s_range-opt = 'EQ'.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
    ENDIF.
Thanks
Reddy

Help For selection screen

Hi,
I dont have any selection screen in my program.
But when user press enter the transaction he should get some screen in which some message is written" This pgm is for background".
Plese suggest me.

Try this code:
AT SELECTION-SCREEN.
if sy-batch <> 'X'.
Display ur message
endif.
Regards,
Joy.

Transaction Variant for Selection Screen

Hi, experts!
A question regarding transaction variants: Is it possible to create screen variants and transaction variants via SHD0 for selection screens? I' ve created a customer report with one selection screen including parameters and select options and would like to provide the users with a variant transaction for this.
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported. And trying to create a transaction variant via SHD0 fails because values entered in the selection screen parameters and select options help screens are not saved and presented.
Any hints are more than welcome!
Regards,
Thomas

You wrote
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported.
But, give the variant a name beginning with "CUS&" and this variant will be transported. Variant beginning with "CUS&" or "SAP&" are so-called "system variant" and are transported automatically. You can then copy the transaction code and use this new variant in the new transaction.
Regards,
Raymond

Global Variable for selection screen variable

Hi All,
We need to create a report where calendar day has to be included in the selection screen.Later after executing the report we should be able to retrieve the selection screen input for calendar day and modify it and use the modified one for other calculations.Can somebody help me out in finding the global variable in the variable exit where we find all the inputs for selection screen variables....
Regards,
Shravani

shravani,
I_vnam will store the varaible names...if you have varaible in the query...
please use this code for ur help...
DATA: ww_der_date LIKE sy-datum,
        wzdate LIKE sy-datum,
        wzact_gi_dte TYPE /bi0/oiact_gi_dte.
wzact_gi_dte = sy-datum.
IF i_step = 2.
    READ TABLE i_t_var_range INTO wa_i_t_var_range WITH KEY vnam =
    'ZNODAYS'.
    ww_der_date = sy-datum - wa_i_t_var_range-low.
        CLEAR wa_i_t_var_range.
    IF i_vnam = 'ZVAGIDCUSTEXIT'.
      CLEAR l_s_range.
      l_s_range-low    = ww_der_date .
      l_s_range-high   = wzact_gi_dte.
      l_s_range-sign   = 'I'.
      l_s_range-opt    = 'BT'.
      APPEND l_s_range TO e_t_range.
      CLEAR l_s_range.
    ENDIF.
ENDIF.
in this case user will enter no.of days in ZNODAYS and that being is used in calculation and used in the next varaible....

How to create variant for selection screen which is in subscreen

Hi,
How to create variant for selection screen which is in subscreen in a module pool program?
it is very urgent.
Thanks in advance.

Hi,
You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
Regards
Sudheer

Detailed pop up screen in selection screen - urgent

hai experts,
how can we give a detailed pop up screen in selection screen.
My requirement is,
To display Details of spool Nos taken for current porogram to take print out from end user.
from OWN SPOOL REQUEST displays all other programs........
can any one give a right solution?
reward will avail for use full answer.
thanks in advance.
regards,
jai.m

Hi Jai
May be you can use this FM POPUP_WITH_TABLE_DISPLAY_OK with the list of spool number populated into internal table.
If you are particulary looking for selection screen, then decalre your selection screen as below
Selection-screen begin of screen 9000.
Selection-screen end of screen.
Then use the statement Call selection-screen 9000 starting at x y.
Hope this helps !
Regards
Ranganath

Change default value (200) of Max No of Hits for selection screen in WAD

How do i change the default value of Maximum Number of Hits from 200 to 1000 for selection screen's find box in Web Application Designer .
Thanks in Advance
Points will be surely Rewarded

Dear Hammad,
Please refer to the wiki created by me,
http://wiki.sdn.sap.com/wiki/display/BI/Information+on+the+user+setting+for+the+selector+dialog
Regards,
Arvind

AT SELECTION-SCREEN - Urgent

Could anybody tell me what does the event( AT SELECTION-SCREEN ) only do ? I am asking only about AT SELECTION-SCREEN
Regards,
SAURAV LAHIRY

hI,
At selection-screen is the event of a report program in which we have to validate the selection screen fields.
SELECTION SCREEN
Selection screens are special screens that are defined with the help of ABAP statements. As programmers do not have access to the flow logic of selection screens, they cannot define dialog modules for selection screens. The ABAP runtime environment fully controls the processing flow of selection screens. To allow programmers to modify the selection screen before it is called (PBO) and react to user actions on the selection screen (PAI), the ABAP runtime environment generates a number of special selection screen events before the selection screen is displayed and after the user has executed actions on the selection screen
AT SELECTION-SCREEN OUTPUT
This event is executed at PBO of the selection screen every time the user presses ENTER - in contrast to INITIALIZATION . Therefore, this event is not suitable for setting selection screen default values. Also, since AT SELECTION-SCREEN OUTPUT is first executed after the variant is imported (if a variant is used) and after adopting any values specified under SUBMIT in the WITH clause, changing the report parameters or the selection options in AT SELECTION-SCREEN OUTPUT would destroy the specified values.
Here, however, you can use LOOP AT SCREEN or MODIFY SCREEN to change the input/output attributes of selection screen fields.
Example
SELECT-OPTIONS NAME FOR SY-REPID MODIF ID XYZ.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CHECK SCREEN-GROUP1 = 'XYZ'.
SCREEN-INTENSIFIED = '1'.
MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST
The event is triggered when the user calls the F4 help for the field field. If no corresponding event block has been defined, no possible values help or values list from the Dictionary is displayed. If a corresponding event block exists, it takes precedence over the default possible values help mechanism. It is then up to the programmer to ensure in the event block that an appropriate list of values is displayed, and that the user can choose a value from it.
No event block AT SELECTION-SCREEN ON VALUE-REQUEST can be created for input fields on the selection screen that are declared within the logical database used. You cannot override the input help mechanism of the logical database within the executable program. You can define separate help within the logical database program using the VALUE-REQUEST option in the PARAMETERS and SELECT-OPTIONSstatements.
Example
INCLUDE DBXYZSEL
PARAMETERS PL_TYPE LIKE SAPLANE-PLANETYPE VALUE-REQUEST.
REPORT SAPDBXYZ DEFINING DATABASE XYZ.
TABLES SAPLANE.
FORM PL_TYPE_VAL.
CALL FUNCTION ...
ENDFORM.
AT SELECTION-SCREEN ON HELP-REQUEST
If the data type of an input field declared in an executable program is defined in the ABAP Dictionary, the documentation of the underlying data element is automatically displayed if the user positions the cursor in that field and presses F1. To create help for input fields that have no Dictionary reference, or to override the help normally linked to the field, you can create an event block for the event
AT SELECTION-SCREEN ON HELP-REQUEST FOR <field>
The event is triggered when the user calls the F1 help for the field <field>. If no corresponding event block has been defined, the help from the ABAP Dictionary is displayed, or none at all if the field has no Dictionary reference. If a corresponding event block exists, it takes precedence over the default help mechanism. It is then up to the programmer to ensure that appropriate help is displayed.
You cannot declare the event block AT SELECTION-SCREEN ON HELP-REQUEST for input fields on the selection screen that are declared within a logical database. You cannot override the help mechanism of a logical database within the program. You can define separate help within the logical database program using the HELP-REQUEST option in the PARAMETERS and SELECT-OPTIONS statements.
REPORT SELECTION_SCREEN_F1_DEMO.
PARAMETERS: P_CARR_1 TYPE S_CARR_ID,
P_CARR_2 TYPE S_CARR_ID.
AT SELECTION-SCREEN ON HELP-REQUEST FOR P_CARR_2.
CALL SCREEN 100 STARTING AT 10 5
ENDING AT 60 10.
This program declares a selection screen with two parameters that both refer to the data element S_CARR_ID in the ABAP Dictionary. The documentation from the ABAP Dictionary is used for P_CARR_1, and a help screen 100 is called for P_CARR_2. The help screen is defined in the Screen Painter as a modal dialog box with next screen 0. It contains the help text defined as help texts. The screen does not require any flow logic.
AT SELECTION-SCREEN ON field
In the PAI event of the selection screen, the event
AT SELECTION-SCREEN ON field
event is triggered. The input field field can be checked in the corresponding event block. If an error message occurs within this event block, the corresponding field is made ready for input again on the selection screen.
Example:
REPORT event_demo.
NODES spfli.
AT SELECTION-SCREEN ON city_fr.
IF carrid-low EQ 'AA' AND city_fr NE 'NEW YORK'.
MESSAGE e010(hb).
ENDIF.
If the user enters AA in the first input field, but not NEW YORK for the departure city, an error message is displayed in the status line until the user enters the correct city.
AT SELECTION-SCREEN ON RADIOBUTTON
In the PAI event of the selection screen, the event
AT SELECTION-SCREEN ON RADIOBUTTON GROUP <radi>
is triggered when the contents of all of the fields in a radio button group are passed from the selection screen to the ABAP program. To define a radio button group <radi>, use the addition RADIOBUTTON GROUP <radi> in the corresponding PARAMETERS statements. This event block allows you to check the whole group. If an error message occurs within this event block, the radio button group is made ready for input again on the selection screen. The individual fields of radio button groups do not trigger the event AT SELECTION-SCREEN ON <field>.
REPORT EVENT_DEMO.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS: R1 RADIOBUTTON GROUP RAD1 DEFAULT 'X',
R2 RADIOBUTTON GROUP RAD1,
R3 RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: R4 RADIOBUTTON GROUP RAD2 DEFAULT 'X',
R5 RADIOBUTTON GROUP RAD2,
R6 RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
IF R1 = 'X'.
MESSAGE W040(HB).
ENDIF.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD2.
IF R4 = 'X'.
MESSAGE W040(HB).
ENDIF.
If the user does not change one of the radio button groups, a warning is displayed.
AT SELECTION-SCREEN ON BLOCK
In the PAI event of the selection screen, the event
AT SELECTION-SCREEN ON BLOCK <block>
is triggered when the contents of all of the fields in a block are passed from the selection screen to the ABAP program. You define a block by enclosing the declarations of the elements in the block between the statements SELECTION-SCREEN BEGIN OF BLOCK <block> and SELECTION-SCREEN END OF BLOCK <block>. You can use this event block to check the consistency of the input fields in the block. If an error message occurs within this event block, the fields in the block are made ready for input again on the selection screen.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

How to set default variant for selection screen

Hi,
I want to make one variant as default for selection screen for one user.
For eg., take COOIS. For the selection screen, i have 3 variants. But i want one variant to be default. Thsi is not for all users. Thsi is for particular user.
I am not seeing any way to do this. please help me..
Thanks
Srini

Hi,
If you are using Z program then you can ask your developer to get Variant name Runtime from Parameter ID.
This means you decide a Parameter ID name : ZVAR in your Z program and ask your developer to load variant each time your Z program loads.
Now, second step will be using SU01 transaction you can set value of ZVAR in Parameters tab for the user. This value will be the variant which you created for this user.
This will solve your problem and you can make n number of variants and assign it to different users.
Regards,
Arpit

Default value for selection screen field

Hi all,
I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
How can I do it?
Thanks
Rahul

Hi Rahul,
In the INITIALIZATION event we can set the default values for selection screen fields.
INITIALIZATION.
loop at screen.
if screen-name = 'S_MATNR-LOW'.
CLEAR S_MATNR.
s_matnr-low = '1234'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr.
CLEAR S_MATNR.
s_matnr-high = '5678'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr
clear s_matnr.
endif.
endloop.
Hope it helps.
Mark if useful
Regards,
Saumya

Code for selection screen, urgent

Similar Messages

Maybe you are looking for