Code generation error when implementing an accumalator

Hi everyone,
I am implementing an accumalator which implements X = X + Y where X and Y are memories of length say 5. Initially I write 5 values into X and Y using a for loop. Then I perform the addition inside a single cycle timed loop and store the results in a temporary buffer(another memory) again of length 5. In another single cycle timed loop, I copy the data from the temporary buffer to memory X.
I changed the arbitration option to never arbitrate for X, but I get a code generation error because of arbitration. Could anybody please tell how to solve this problem.
Regards,
Prashant
Solved!
Go to Solution.

Hi NitzZ
I figured out a way to solve the problem. I chose the "Never Arbitrate" option for all memories and replaced the for loop with a timed loop. Now there are no errors.
Thanks,
Prashant

Similar Messages

Generic oracle eway code generation error in Java caps 5.1.3

Hi,
I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
     at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
     at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
     at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
     ... 10 more
Regards,
Abdul

hi...
i too getting same problem..how did u reslove this...
please help me out...
thanks in advance
KK

Internal error when implementing extension

Hello everyone
At the moment I create a new contract (transaction RECN) an error occurs and I can not solve.
Someone could help me?
Internal error when implementing extension (see long text)
Message no. RECAAP093
Diagnosis
Call of GET_EXTENSION( ) method for enhancement CL_FILACI_VICN01_EXTENSION failed.
It tried to use an add-on or customer-specific enhancement that is not implemented in your system.
To be able to determine the technical attributes of enhancement CL_FILACI_VICN01_EXTENSION, the RECA_STORABLE_EXT Business Add-In has to supply the desired information. However, this was not the case. In an implementation of RECA_STORABLE_EXT, the GET_OBJNAME_EXT( ) method must supply the required enhancement CL_FILACI_VICN01_EXTENSION.
Below is example code for GET_OBJNAME_EXT( ):
CASE ID_OBJNAME_STD.
WHEN '...'.
APPEND 'CL_FILACI_VICN01_EXTENSION' TO CT_OBJNAME_EXT.
ENDCASE.
For more information, refer to the documentation for the RECA_STORABLE_EXT Business Add-In.
Start BAdI Builder
Procedure
Contact your system administrator.
tks a lot!

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Code Generation Error - SUP 2.2 / SUW 2.2

Hi,
I have formatted my laptop PC and re-installed Sybase Unwired Workspace 2.2. After the installation I get Code Generation Error message:
Before Code Generarion attemp the Java Build Path / Source tab is empty and after the Code Generation the error specified above is generated and the following path is added to the Java Build Path / Source tab:
XXX/Generated Code/src (missing)
I cannot resolve the problem. Does anybody has idea about the problem?
thanks,

Hi,
1. I created a new model having only one MBO and generated code successfuly.
2. The result is the same after deletion of "Generated Code" and creating new folder
3. The result is the same after generation code to another folder.
nothing has changed but I discovered additional information in the "workspace\.metadata\.log" file:
com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:115)
at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.sendRequest(CodeGenerationJob.java:200)
at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.processTasks(CodeGenerationJob.java:172)
at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.runInWorkspace(CodeGenerationJob.java:123)
at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
Caused by: com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
at com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException.<init>(CoordinatorException.java:27)
... 6 more
Caused by: com.sybase.modeling.templatej.runtime.adapter.impl.NoSuchMemberException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
at com.sybase.uep.tooling.codegeneration.CodeGenerationException.<init>(CodeGenerationException.java:26)
at com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException.<init>(ClientObjectAPIException.java:27)
at com.sybase.uep.tooling.codegeneration.clientobjectapi.impl.ClientObjectAPIDelegator.generate(ClientObjectAPIDelegator.java:155)
at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:86)
... 5 more

Graphics tab in REBDBU: Internal error when implementing extension

Hello,
Seek your kind help please.
I have entered in the building master data using REBDBE. We have a tab called Graphics. The pictures etc of the building are uploaded using a software called Korasoft. When i am clicking on the Graphics tab, it is entering the screen but immediately afterwards flashing the following message, "Internal error when implementing extension".
Doing a F1 on the error message shows the foll details:
"Diagnosis
An internal error occurred during the implementation of a customer-specific enhancement. A CHANGE-API module was called with an object reference (parameter IO_OBJECT) that was not instantiated in the required activity for changing (02). The API modules are function modules and begin with API_RE_.
Procedure
Within the BAdI implementation, transfer the parameter IO_OBJECT from the BAdI method directly to the API module. Make sure that the transferred instance is allowed to be changed."
I found that the SAP note 1139014 causes this error message to be generated. Note 1139014 forms a part of support pack level 13 (release 600). Recently we have upgraded our systems from support pack level 8 to support pack level 13. Naturally even this note got implemented at that time.
But now this note is causing this error message and so I will be grateful if someone can please tell me how to rectify the error.
Regards,
Suvarghya Dutta
Edited by: Suvarghya Dutta on Feb 11, 2009 5:30 PM

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Code 5 error when downloading smartprint

Like other users when attempting to download Smartprint, I get as far as "Configuration Setting" but then am told "an unexpected error has occurred- error code 5". I cannot find any infomation regarding Error 5 in HP Support pages. that would correct the problem. If anyone can help, I will be very grateful

Hi , I see by your post that you are getting a "code 5" error when trying to download Smart Web Printing Software. I would like to help you.
What Internet Explorer version are you using?If it is a newer version, then most likely that is why you are getting the error. HP Smart Web Printing Software - Internet Explorer 9 and Later Versions are Not Compatible with HP Smart Web Printing. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

Float4() causes "error saving Pixel Bender Byte Code file" error when exporting for flash player

Simple test
<languageVersion : 1.0;>
kernel untitled
<   namespace : "Your Namespace";
    vendor : "Your Vendor";
    version : 1;
>
    input image4 src;
    output pixel4 dst;
    void
    evaluatePixel()
        dst = float4(sampleNearest(src, outCoord()));
The above code will produce a "error saving Pixel Bender Byte Code file" error when exporting for flash player in Pixel Bender Toolkit 2.5.449694.
"dst = (sampleNearest(src, outCoord()));" works fine. And anything like "float4 a= float4(b);" will give same error.

Thank you for the error report. I'll put it into our bug database. We're bottling things up for the current version. Gven the workaround, it is unlikely we'll be addressing this bug soon. Please accept my apologies for the annoyance this will cause.
In your second example, float4 a = float4(b), does it return an error if b is only a float4 or regardless of what b is? If b is a scalar float, for example, is the conversion performed correctly? If so, this could be an error that only crops up when using constructor/conversion syntax when the thing being converted is already the correct type.
Thanks,
Chuck.

Generation Error - when trying to publish a Java web service

Hi All,
I keep getting the following Generation Error -- java.util.NoSuchElementException_ when I'm trying to create a Java Web Service using the jdeveloper wizard.
I have 2 entities and 2 stateless session beans acting as their facades. One entity has a One-One(FK) relationship with the other entity. I test out the entities and session beans using the test client and the OC4J embedded container and everything seems to work. When I try to generate a Java WebService from one of the entities I keep getting the "Generation Error". Could someone please provide me with some insight into why I'm facing this problem, because it seemed fine when I published J2EE web services previously and now this happens and I cant seem to publish web services anymore. Everytime I keep getting the same GenerationError. Thanks in advance.

Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

NI Motion Assistant LabVIEW Code Generation Error

Hello, the following is my current setup:
NI PCI-7334 motion control board
NI UMI 7774 splitter board
3 x NI P70530 Drives
3 x NI CTP12ELF10MAA00 Stepper Motors
3 x Power supply units for drives
LabVIEW 2010
NI Motion Assistant 2.6
Motion and Automation Explorer 4.7
I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
Thank you for your help.

Hi Joe,
I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
Attachments:
1111.vi ‏9 KB
1 axis movement.zip ‏8 KB

How to catch thrown error when implementing HttpSessionBindingListener?

I would like to write code to implement the class HttpSessionBindingListener for using the valueBound and valueUnBound method.
As I have put some codes for inserting data in database when the valueBound method is invoked, I would like to catch the SQLException error when insertion fails. However, when i try the following:
public class SessionTracker implements HttpSessionBindingListener
throws Exception{
Compilation error like the following appears:
Class SessionTracker should be declared abstract; it does not define method valueUnbound(javax.servlet.http.HttpSessionBindingEvent) in interface javax.servlet.http.HttpSessionBindingListener
My question is: How can I throw caught error?
Thanks for replying!

May be i should clarify a little bit?
My question is: What error would the implemented method throw?

" Path not found() "error when implementing single sign on

Hi,
We are implementing single sign on so that when users click on the "Reports Login" he is navigated to the obiee presentation services screen. For the reports login we have a .asp page which directs to the presentation services.
I have done the necessary changes in the instanceconfig and credentialstore xml files.
I have been receiving a strange error when I click on the reports login. I get the error
Path not found ()
Error Details
Error Codes: U9KP7Q94
I have checked the presentation server log file and I see the below error
Type: Error
Severity: 45
Time: Tue Mar 09 09:18:44 2010
File: project/websubsystems/ssportal.cpp Line: 1907
Properties: ThreadID-2672;HttpCommand-Dashboard;Proxy-;RemoteIP-127.0.0.1;User-;Impersonator-
Location:
     saw.subsystem.portal
     saw.httpserver.request
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
Path not found ()
Can anyone provide me an input how to resolve this issue?
This is bit urgent for me.
Thanks

Hi,
Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
Thanks,
Venkat

Error when implementing CUA

Hi,
I wanted to implement a test of CUA with my DEV systems (DEV R3, DEV BW, and DEV SRM). When i've created the model distribution in my central system (DEV R3 client 030), and saved the model, i had the following error in my child system (DEV SRM) : "ERROR when starting the text comparison". I didn't have any error in the other systems (DEV R3 and DEV BW).
I've checked my RFC connections, I don't know how to sove this problem.
Thanks in advance for your aswers...
Regards,
Mohamed

OK, I've solved the problem by myself.
In fact, I didn't have an RFC user connection between my child system DEV SRM and my central system DEV R3. I had just RFC users connection between my central system and my child systems...
Mohamed

ODBC Error when implementing BI Apps on SQL Server

Hey,
we are implementing BI Apps using SQL Server as the warehouse database, and we are running into the following errors when viewing the out-of-the-box reports:
[ODBC SQL Server Driver][SQL Server]'concat' is not a recognized built-in function name
[ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'NULLS'..
It appears that the standard reports are using Oracle-specific SQL functions that are not available in SQL Server. Yet BI Apps is supposedly certified with SQL Server.
Have anyone else run into this issue? If so, how did you get around it?
Thanks,
Yi

Ah, sorry, I misunderstood.
Yes, the CONCAT_SUPPORT feature is checked for both value and default. However, CONCAT_NULL_RETURNS_NULL is not checked. Should I check it?
It's great to know that you have it working on SQL server. I must be missing some configuration then.
Thanks,
Yi

Unicode error when implementing a BADI

Hi All,
I get a Unicode error when trying to implement either one of these two BADIs: ME_GUI_PO_CUST, ME_PROCESS_PO_CUST:
In Unicode programs, the "-" character cannot appear in names, as it does here in the name "MMCNT_EKKO-BEDAT".
There are two more similar errors. They all refer to the type group MMCNT, which is an SAP delievered object and is active. Has anyone ever encountered these errors?
Thanks!
Roman D.

Hi,
You did not mention which version of SAP you're using, but I just thought that the OSS Note 829031 might be relevant for you.
Regards,
Anand Mandalika.

Fpga code generation error after updating from 8.5.0 to 8.5.1

Hi All,
I have a FPGA-VI which was compiled in LV 8.5.0 without errors. After I updated to 8.5.1 the Code Generation stops, telling me the clock domain is not supported for write FPGA I/O node (see attachment). Also I attached a picture of a simplified FPGA-VI which brings up the same error.
I use a PXI-7833R connected to a cRIO-9151 R Series Expansion Chassis with a NI-9421 modul (8-ch DI, 24V) installed in it.
My original FPGA-Code has a theoretical maximum of 22MHz, so I can't change the clock domain to 40MHz.
Do you have any suggestion how to get the VI compiled?
Uli
Solved!
Go to Solution.
Attachments:
ErrorMessage1.jpg ‏30 KB
FPGA-VI1.jpg ‏17 KB

Hi Ruhmann, hi Basset Hound,
thank you for your reply and giving me a better insight in things.
I started my VI with 40MHz clock domain. The Vi got bigger, some more logic here and some more code there. Finaly the compiler couldn't satisfy the timing any more. Instead of optimising the code, I reduced the clock domain.
Until your post I didn't realise I use CompactRIO I/O. Is There a difference to (let me call it) "direct R-Series I/O"?
I need the Expansion Chassis (Connector 1), the 9421 (8-ch DI) and 94?? (8-ch DO) to connect 24V logic to the FPGA. Additionally I have two SCB-68 (Connector 2+3) for 5V logic (DI, DO, A/B linear position measurement, pulse generation) and some analog input. All code in 1 VI, but distributed in 3 loops.
To change the clock domain back to 40MHz, I have to optimise my code . Well, the code is sloppy , so optimising is OK .
To tell the hole story:
After updating to 8.5.1, my first contact to NI was by phone. The engineer asked for the Code, the project and the hardware.
It took a while for me to put the information in an email. Meanwhile engineer the found a paper with the solution I
mentioned in my second post and send it to me, before looking at my code. The paper said someting about "tightend timing constraints",
"safe communication" and "multiple DMA target to host transfer". Not exactly what I was doing, but I reinstalled
RIO 2.3.1 and ... compile successful.
@ Basset:
The simple VI (picture) in my first post reproducese the issue exactly.
I'm not at work any more, so I can't provide the full code or the SRQ# until tuesday (holiday on monday ).
FYI I'm located in Germany, so I called the german NI support.
Uli

Code generation error when implementing an accumalator

Similar Messages

Maybe you are looking for