Code/Program to display script assets of a script
Hi Folks,
Is there any API in open script to programatically display all the script assets of a script?
Hi ,
This Forum is dedicated for Project server and project professional related queries. This forum is not appropriate for your query. You should post your query to correct forum which will help you to get resolution.
kirtesh
Similar Messages
-
How to change a Code Page in SAP SCRIPT ?
I have a specific requirement, would need your help :
There is a <u><b>CODE PAGE</b></u> which is getting assigned to the <u><b>SAP SCRIPT FORM</b></u>. <i><b>For E.g : 1100 is generally used for SAP SCRIPTS.</b></i>
I would like to know if there is a possibility to change the <u><b>Code Page</b></u> based on certain conditions ??
Also i would like to know how and where is a <u><b>CODE PAGE and SAP SCRIPT FORM linked.</b></u>
I have analysed that a <b>default code page</b> can be set in the <b>SAP LOG ON PAD</b> but not able to find the issues mentioned above.
Kindly help me out with your valuable suggestions and solutions.
Thankyou
Brijesh.Hi,
MDMP means Multi Display Multi Processing. See the note system for details. The problem of MDMP is that the different languages use different codepages and not all characteres can be displayed in every codepage.
A solution would be a unicode conversion of the system. In unicode there is only one internal codepage, which contains all special characters of the individual languages. However the migration needs several hours of down time and unicode systems need more memory and disk space. I can't tell you a percentage for that. You need at least R/3 4.7 for unicode.
In non-unicode system I believe you can't change the codepage inside a SAPscript document directly. I would have to end form processing an start a new form. To change the language you can try the ABAP-command SET LOCALE. Also see the language parameter in START_FORM.
If that doesn't work I would try using RFC-Connections. Make RFC-Connections in your system which contain the system it self as target system, but with the desired language filled in. You do not need to provide a user or password, that would be taken form the logged on user.
Inside your printing program you put the real printing into a function module. Your report then can call the function via RFC using a connection in the correct logon language.
Greetings -
Doubt in creating program to display application logs
Hi,
I have doubt in creating a program to display application logs.
The standard transaction code SLG1 has been used to display Application logs till now by the user.
They came up with the new requirement on this.
<u>The requirements were:</u>
1)New custom program shoud be created like SLG1 with limited selection fields( data from, date to, Program name and User)
2) Detail list should be displyed immediately when this program is executed because SLG1 gives Basic list,Detailed list which is getting displayed when 'Detail view' is selected in the first list.
I have created one program with limited selection fields as per the requirement using the below function modules .
BAL_FILTER_CREATE
BAL_DB_SEARCH
BAL_DB_LOAD
and BAL_DSP_LOG_DISPLAY
<u>Issue :</u> still I am getting the firt list.
both Basic and Detailled lists are getting triggered at the FM BAL_DSP_LOG_DISPLAY.
Is it only the way to copy and modify this FM.
Could you please suggest me?
Thans in advace,
babu.
Message was edited by:
babu v
Message was edited by:
babu vHello All,
Thanks for your valuable suggitions.
I have seen most of the demo programs.
I found one fm'BAL_DSP_PROFILE_NO_TREE_GET' which avoids the tree list which is getting listed above the profile list.
I have been searching alot to omit the Profile list. I searched alot to find any function modules realted to that.
The requirement was only the Detail list should only be listed.
Could you please suggest me to avopid that profile list also?
Thanks in advance,
babu
Message was edited by:
babu v -
Purpose of RSTXTRAN program for SAP-Script ?? ??
Purpose of RSTXTRAN program for SAP-Script ?? ??
when it is required to run that program ?Hi sarit,
Purpose of RSTXTRAN program for SAP-Script Transfer of SAP script Texts to a Correction.
The report RSTXTRAN allows a set of SAP script texts (or the text key) to be transferred to a correction or repair of the transport system. The name of the correction/repair can either be transferred as a report parameter, or the correction/repair can be selected later in a selection window. The text key can be qualified generically using the asterisk character (*).
When the report has been executed, the list of selected texts appears. Individual texts can be deselected in this list. When the function "Continue" is executed, the final list of texts which are to be transferred is displayed. The transfer of texts to the correction/repair can now be activated by the appropriate function, and must be confirmed in a dialog box.The requirements for this as follows.
There is a correction/repair in which the selected text keys can be entered, if it is not being processed. The report can only insert text keys in corrections or repairs, not however in transport requests. However, the objects contained in a correction can be transferred to a transport request with the correction and transport system transaction.
It should also be noted that the report selects texts in the current client, but that the transport system generally exports texts from client 000.
When the report has been executed,the output can be a list of the selected texts. Information about whether transfer to the correction/repair was possible is displayed for each text key.
Reasons for failed transfer include
o the correction/repair is currently being processed
o the correction/repair does not exist
For Example
All German standard texts with the ID ST, whose names begin with SAPSCRIPT, are to be entered in the correction B20K009999. The report parameters are then assigned values as follows:
o Correction: B20K009999
o Text object: TEXT
o Text name: SAPSCRIPT*
Thanks,
Usha -
Subroutine program its display the text at line item as it's service order
Hi All,
Am looking for subroutine program its display the text at line item as it's service order, I want to view the text in sapscript in the tcode ME9F of the order text.
Ex:- in tcode ME23N, select PO & item details in Account Assignment tab, ORDER field is not displaying for some of the orders, but while debugging I can see the ORDER values.
Can'nt see the ORDER field in print preview, Pls let me know.
Edited by: Nagendra DS on Feb 19, 2008 3:18 AMHi,
If you are retrieving the values in the print program, the values will definetly get populated to the sap script. In case of subroutines in the form, the values you pass it to the structure ITCSY should be characters only.
Hope this helps.
Sudha -
How to know print program for SAP Script
Hi friends,
how to know print program for SAP Script form name ?Hi ,
You can use the following code changes in the layout & see..
You have to create a program Z_BC460_EX4_HF for that..
/:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
/: USING &CUST&
/: CHANGING &NAME&
/:ENDPERFORM.
Dear &NAME&
The ABAP routine could be defined as follows:
IMPORTANT: The structure itcsy must be used for the parameters.
REPORT Z_HENRIKF_SCRIPT_FORM .
tables scustom.
form get_name tables in_tab structure itcsy
out_tab structure itcsy.
read table in_tab index 1.
select single * from scustom
where id = in_tab-value.
if sy-subrc = 0.
read table out_tab index 1.
move scustom-name to out_tab-value.
modify out_tab index sy-tabix.
else.
read table out_tab index 1.
move 'No name' to out_tab-value.
modify out_tab index sy-tabix.
endif.
You could also fill the ouput parameter table this way
READ TABLE out_par WITH KEY 'NAME1'.
out_par-value = l_name1.
MODIFY out_par INDEX sy-tabix.
endform. -
Asset Quanity ( Manually updated in Master data) is not Display in Asset Invetory report
Dear Experts
I have created as Asset master ( T code AS01) and given the quantity 1 EA and there is no acquisition with any value . But when I try to pull out the asset report with quantity, the above mentioned assets are not updated/displaying in any assets reports .
My requirement is , the assets report should be updated with quantity which I updated manually. How can I rectify this issue? Please advise
Thanks & Regards
Sijo
FICO ConsultantSijo,
you can display this assets by AR12 since there are no postings yet. Reports like AR01 displays only Asstes with value.
Regards -
Provide Sample Program for Display Symbol?
Hi All,
I want write program for display symbol in S94, but want to know which table i can refer, please provide me a sample program for that.
Regards
AvinavHi,
Do you mean the ICONS ?
TYPE-POOLS : ICON
In your code use the icon name.
In case of ALV, in the fieldcatalog mention wa_fielcat-icon = 'X'.
Thanks
Swarna -
Error message "This program cannot display the webpage when uploading images to Cafe Press
I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
Most likely causes:
• You are not connected to the Internet.
• The website is encountering problems.
• There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address."
I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
Server not found
Firefox can't find the server at members.cafepress.com.
* Check the address for typing errors such as
ww.example.com instead of
[url=http://www.example.com]www.example.com[/url]
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
Nancy
http://www.cafepress.com/calendarflrSounds like your desktop application is in fact running from
a server. CHMs were identified as a security risk by Microsoft and
are best suited to the user's PC.
Click
here for more information. -
Module pool programming - supressing display of some fields
Moderator message: better to start a new thread.
Hi i have similar requirement to this. module pool programming - supressing display of some fields
suppose i am displying
BUKRS 0001
Sales org 0001
KUNNR 1000
i dont want todisplay if the field is blank.
suppose if sales org is blank
expected result is liek this
BUKRS 0001
KUNNR 1000
i tried through loop at screen by uisng that
i am getting output like below.
BUKRS 0001
KUNNR 1000
hello subbarao, could you tell if your problem solved.Hi Naidu,
In PBO put
DATA: FLAG TYPE I VALUE 0.
IF SALESORG = SPACE.
FLAG = 1.
ENDIF.
LOOP AT SCREEN.
IF FLAG = 1.
IF SCREEN-NAME = 'SALESORG'.
SCREEN-INVISIBLE = 'X'.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
Thanks,
Chidanand -
I have a problem in loading programs
And display my me Hazh message
(Plase contact itunes support to complete this transaction)You need to contact iTunes Support. There is a "Contact Us" link at the bottom right of every page of the forums.
Best of luck. -
Help regarding program to display even numbers
plz send me a program to display even numbers from 1 to 100.
DATA : VAL TYPE I.
DO 100 TIMES.
COMPUTE VAL = SY-INDEX MOD 2.
IF VAL EQ 0.
WRITE : / 'Even NOs are' , SY-INDEX.
*ELSE.
*WRITE
ENDIF.
ENDDO.
REGARDS
SHIBA DUTTA -
Search print program and sap script
hii , how can i find trigring print program and sap script for a particular purchase order.
regards Aditya
Edited by: aditya shrivastaba on Apr 14, 2008 9:59 AMHey,
First go with Me22 or 23 with po that you had, and then check with output type for that in the transaction. After that go to TNAPR table and check the corresponding form and print program.
Or else, go with NAST table in that put PO num in 123456 and put in OBJKY field in nast table. It will give you the output type of it, so that u can find the print program and lay out in TNAPR
Many thanks,
Raghu. -
Standard driver programs,output type ,scripts,smartforms for SD reports
hi experts,
Can any one list all the standard driver programs,output types ,scripts,smartforms for SD reports.
maniHi,
Check this out
NACE
You can track the form and the print program used for that form
The Tcode NACE is used to link the Standard SAP forms (SCRIPTFORM or SMARTFORM) or the customized form or the new form to its respective print programs. Also the output types, Form entry are linked with their forms and print programs. In short term, i can tell u that configuration or customization of forms to print programs, assigning output types, form entry to the forms are done using this Tcode.
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
Condition records in NACE?
and
NACE is used for message control customizing.
Take a look at the following link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
and also
NACE is used for message control customizing.
Take a look at the following link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
If it helps reward with points.. -
Standard program to display which tables are used by Webdynpro ABAP program
Hi Gurus,
I am working on a couple of enhancements in SAP Promotion Management for Retail (SAP PMR) which works on the principle of Floor Plan Management.
I was wondering if anyone would know of a standard program to display the tables used by Webdynpro ABAP?
(or)
Where can I get info of SAP Tables associated to SAP PMR?Hi,
I am not aware of any standard reports that displays the tables.
If I have to view the tables, I would go to se80, give the package and view all the tables in the package.
Regards,
Daz.
Maybe you are looking for
-
Get back the data in R/3 If R/3 fails
Hi All, If our R/3 system were to fail, and we had to bring it back from a backup that would be dated behind the current status of the CRM due to MW flowing, what would we need to do for R/3 to get back orders/customers that existed in CRM bu
-
Photo Albums order into AppleTV
Hello, looking at my photo library from the Apple Tv 2nd gen I don't see them in the same order as they are shown into iPhoto on my macMini, it seems the Apple Tv shows them sorting by the import date into ATV, while i would like to have them sorted
-
I'm executing the code abouve, but I found an error: double d4 = 19.64 + .51; System.out.println(">>d4:" + d4); [out] >>d4:20.150000000000002 // erro
-
Plz check the code and tell me necessary modifications
report Z_PHANIBDC2 no standard page heading line-size 255. include bdcrecx1. PARAMETERS:P_FILE LIKE RLGRAP-FILENAME DEFAULT 'C:Documents and Settingssarath.vempatiDesktopphani1.TXT' OBLIGATORY DATA: BEGIN OF RECORD1 OCCURS 0, LIFNR(0
-
I got wsdl in every request ?
Hi, my customer has a webservice written in .net, having wsdl with extension .asmx i create a webservice client with jax-ws 2.1 (in fact i use netbeans 5.5.1, it uses jax-ws 2.1) It runs well. However, i realize that for my all webservice operation c