Cold backup from AIX to HP-UX

Hi,
Is it possible to restore a coldbackup which has taken form AIX machine to HP-UX machine?
I think there are endians different and not possible.. Please suggest me and correct me
Thanks
KSG
Not (AIX to Solaris) Edited by: KSG on Aug 11, 2010 6:25 PM

As I said above, if endaness are not same, you should use transportable tablespace across plateform, if they are same then you could use transportable database.
But most likely you cannot copy the file from AIX to Solaris and hope that'll work, you have to do some stuff especially on tablespaces containing rollback segment.
Please, read the doc I linked earlier, everything is in there, you have to convert the database on source or on target (it is up to you), but simply copy won't work.
Again, following that doc should remove the doubts and shows the way to take.
Nicolas.

Similar Messages

  • Cold backup from disaster system

    Hi,
    We are using oracle 9.2.0 ,HP UNIX and SAP version 4.7E.  We have disaster recovery configuration.
    We are normally taking oracle cold backup using UNIX commands and at the time of taking cold backup we shutdown the production system.
    My queries are:
    1.I do not want to shutdown production system. I want to shutdown disaster recovery system and take cold backup from disaster system using UNIX commands.
        (I) what are the prerequisites to follow this?
        (ii) Is it right way to take backups?
    Thnaks&Regards,
    Nani

    Hi Nani,
    The reply to your queries are below :
    1) Prerequisites :
    a) Make sure that the archive logs generated at the production site are stored temporarily at the DRP site, so that when the DRP DB starts after backup gets completed, it will get recovered using those logs.
    b) Make sure that there are scripts or procedures in place for automatic shipping and application of redo logs at the production and DRP sites respectively.
    c) Ensure that two consecutive backups of the DRP DB don't overlap, otherwise the redologs will only fill the temporary location (usually oraarch or saparch) without getting actually applied.
    2) This is definately a much better and efficient way to take backup of your production server. This will ensure higher availablity of your production server for carrying out business.
    Regards,
    Deoraj Alok.

  • RMAN Backup and Restore - From AIX to Linux

    Hi All,
    I want to take RMAN Backup from AIX (Oracle 11.2.0.3) and restore it to RHE Linux . Both of them are 64-bit.
    Can someone please, let me know the steps ?
    Thanks,

    airmax012 wrote:
    hello can i restore an RMAN backup from AIX to LINUX?
    thanksI give up.
    Can you.
    post Oracle version to 4 decimal places

  • Test cold backup database in archive mode

    Hello,
    We doing every week a cold backup from Oracle database, us database is in archive mode.
    We would like to test us cold backup in other server but the drive where we have to copy
    the datafiles and logs and rollback are different on this server.
    In the production server the oracle_home and the oracle_sid:
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    ORACLE_SID=ENCY
    and on the other server to test the backup are:
    ORACLE_HOME=I:\oracle\product\10.2.0\db_2
    ORACLE_SID=ENCY
    Can somebody help me saying please the steps that I have to follow to restore the database in other server
    to test if the last cold backup is fine?
    My understand is copy the files(datafiles, log files, control files, pfile,...) in the new server, when everything is copied into new server,
    I have to:
    Modify the parameter CONTROL_FILES in the pfile
    Mount the database and rename the datafiles and redolog files
    Thanks.

    user641364 wrote:
    Hello,
    We doing every week a cold backup from Oracle database, us database is in archive mode.
    We would like to test us cold backup in other server but the drive where we have to copy
    the datafiles and logs and rollback are different on this server.
    In the production server the oracle_home and the oracle_sid:
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    ORACLE_SID=ENCY
    and on the other server to test the backup are:
    ORACLE_HOME=I:\oracle\product\10.2.0\db_2
    ORACLE_SID=ENCYThe only difference between servers is different ORACLE_HOME path?
    All other directories are the same?
    >
    Can somebody help me saying please the steps that I have to follow to restore the database in other server
    to test if the last cold backup is fine?
    My understand is copy the files(datafiles, log files, control files, pfile,...) in the new server, when everything is copied into new server,
    I have to:
    Modify the parameter CONTROL_FILES in the pfile
    Mount the database and rename the datafiles and redolog filesYou shoud modify and rename only in case if path to datafiles, redologs, controlfiles, dump, archive log directories is different on test server.
    If that will be the same, then no need to rename.
    If it is different, then modify pfile in order to meet correct one paths.

  • Cold backup on HP-UX PA-RISK restore at HP-UX Itanium

    I have taken Cold backup from HP-UX 11.11 PA-RISK.
    I want to restore on at HP-UX 11.32 Itanium, does it support?

    It will support.
    Regards
    Asif Kabir

  • RMAN restore from AIX to Linux

    hello can i restore an RMAN backup from AIX to LINUX?
    thanks

    airmax012 wrote:
    hello can i restore an RMAN backup from AIX to LINUX?
    thanksI give up.
    Can you.
    post Oracle version to 4 decimal places

  • Cold backup restore to a different bit level

    Hi all. I am planning for a coldback restore between two databases. The source db is 10.2.0.3 on 32-bit server Windows 2003 and the destination db is 10.2.0.4 on windows 64-bit. Is it possible to perform this restore? Also is RMAN restore possible? Thanks for any responses.

    Hi, I performed a restore of cold backup from 10.2.0.3 database to 10.2.0.4 database on another server. I am receiving this error:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01159: file is not from same database as previous files - wrong database id
    I am restoring only the schema specific datafiles from the old database and not system, sysaux files .. I understand that there is a mismatch here because the source datafiles are not compatible with the new system files. Any idea what can be done here to get around this error? I am trying to perform a clone of the database into another server. The database name is same.

  • Cold backup restore on fail safe environment.

    Hi,
    The setup:
    Windows 2008 with 2 node MSCS cluster in active/passive configuration.
    Oracle Database 11.1.0.6 .
    Oracle Failsafe 3.4.2
    Database :test database; 2 in no. ,both Single instance. Both database are created with cold backup from production.
    The Requirement:
    To refresh both the test database with cold backup from the same production database as before. And then with the same cold backup create a physical standby database of the newly recreated testing database.
    The Plan:
    1.take all dbfile,controlfile,redologfiles,standbyredologfiles,tempfiles backup from production.
    2.after taking the testing database offline from failsafe and normaly starting on node1; restore dbfile,controlfiles,redologs,srl,tempfiles to testing server. spfile should be properly pointing the new controlfile.
    3.startup mount.
    4.directory structure for control,redo,srl,dbfiles,tempfiles are diffrent.so,rename file for all dbfiles,redologs,srl,tempfiles.
    5.creating a standby controlfile for creating physical standby db of this testing database.
    6.open the database.
    7.shutdown immediate.
    8.start with failsafe.
    The doubt:
    1. is this plan ok for refresh of the test databases?
    2. with the backup taken at step1 and standby ctl file created at step 5 can i create a physical standby database of the testing db?
    Please note, the production database is only in picture while taking backup.
    Please guys help me for clearing the said doubts.
    regards.
    g

    The doubt:
    1. is this plan ok for refresh of the test databases?
    2. with the backup taken at step1 and standby ctl file created at step 5 can i create a physical standby database of the testing db?
    Please note, the production database is only in picture while taking backup. You are taking cold backup, So the mentioned procedure you can follow. But ensure all the services/background processes related to database are not running.
    Once you prepare Primary database, even from that database you can create standby control file, so that it will be used for standby database.
    But i'm not aware of how fail safe it works, As per the core database part whatever the steps you mentioned, it looks fine.
    Thank You.

  • Enterprise Manager Configin a new host after recovery from cold backup

    Dear friends ,
    we have recovered a DB in new host(windows) from the cold backup.
    Listener is configured and EM is also configured .
    I am able to login through the EM . In the front page i get an error like
    java.lang.exception:unknownhost exception sensding request ::<hostname>.<domain>
    Please Note :The hostname from which we have taken backup(operation system) is different from the new host name where have recovered the DB.
    Also when i clicked the link for administration page or performance page
    i was taken to the login page which was showing as follows
    user name:
    password:
    Connect String : <old host name>.<domain name>
    Now i dont know where is parameter of old host details are stored and how it has to be replaced.
    Please reply if anyone can have the solution .
    Thanks in advance
    Madhu

    Please Note :The hostname from which we have taken backup(operation system) is different from the new host name where have recovered the DB
    This is the call for trouble actually.EM repository stores the info of hostname/ipaddress of the machine where it is configured. So any change in that information will not let you use EM.There are couple of files which are there in which this information is stored and if needed, that information can be be manualy edited.But manual editing is not a good way to deal with repository.So the better option for you is to recreate the repository of your EM
    Follow the link for the description of the commands.
    You would have to use
    $emca -deconfig dbcontrol db -repos drop
    $emca -config dbcontrol db -repod createHTH
    Aman....

  • How to do media recovery from cold backup?????????/

    Hi
    i take cold backup of my 9i database ....
    in case my database is up .....
    how will i recover my database if i lose a single database file and i want to recover it from cold backup......
    Thanks in advance
    Gagan

    Here you go
    These are the steps:
    1. Restore the lost file from a backup.
    2. If the database is down, mount it.
         SVRMGR> STARTUP MOUNT PFILE=<location_of_pfile>;
    3. Issue the following query:
    SVRMGR> SELECT V1.GROUP#, MEMBER, SEQUENCE#,
    FIRST_CHANGE#
    FROM V$LOG V1, V$LOGFILE V2
    WHERE V1.GROUP# = V2.GROUP# ;
    This will list all your online redolog files and their respective
    sequence and first change numbers.
    4. If the database is in NOARCHIVELOG mode, issue the query:
         SVRMGR> SELECT FILE#, CHANGE# FROM V$RECOVER_FILE;
    If the CHANGE# is GREATER than the minimum FIRST_CHANGE# of your logs,
    the datafile can be recovered. Just keep in mind that all the logs to
    applied will be online logs, and move on to step 5.
    If the CHANGE# is LESS than the minimum FIRST_CHANGE# of your logs, the
    file cannot be recovered. Your options at this point would be to restore
    the most recent full backup (and thus lose all changes to the database
    since) or recreate the tablespace as explained in scenario a.
    5. Recover the datafile:
    SVRMGR> RECOVER DATAFILE '<full_path_file_name>'
    6. Confirm each of the logs that you are prompted for until you receive the
    message "Media recovery complete". If you are prompted for a non-existing
    archived log, Oracle probably needs one or more of the online logs to
    proceed with the recovery. Compare the sequence number referenced in the
    ORA-280 message with the sequence numbers of your online logs. Then enter
    the full path name of one of the members of the redo group whose sequence
    number matches the one you are being asked for. Keep entering online logs
    as requested until you receive the message "Media recovery complete"
    7. If the database is at mount point, open it.

  • Recovery from cold backup

    Hi,
    We take Hot backup everyday, but I took a cold backup using the same catalog. If I want to restore the cold backup I took, what is the proceedure. We are running on 10g in HP Unix.
    Thanks.

    Hi Rock2,
    If you want to restore the cold backup you need to know the tag belonging to this backup.
    Using the logfile of the coldbackup or <list backup summary;> in rman you should be able to get this info.
    The restore would be similar as:
    connect catalog rman/pwd@define_rcv;
    # check in catalog database for the dbid.
    # If so set the appropriate dbid by unhashing the line directly below using the current dbid
    # set dbid = define_dbid
    connect target /;
    STARTUP NOMOUNT;
    run {
    allocate channel tc1 type 'SBT_TAPE'; # or 'DISK'
    allocate channel tc2 type 'SBT_TAPE'; # or 'DISK'
    # adjust the TAG in the following lines
    restore controlfile from tag TAG0000001;
    sql 'alter database mount';
    restore database from tag TAG0000001;
    sql 'alter database open resetlogs';
    release channel tc1;
    release channel tc2;
    Regards,
    Tycho

  • ORA-00313: open failed for members during restore from COLD backup

    Hi all,
    I took a cold backup of an 11.1 database using RMAN (database in mount state).
    I used the following command to restore it:
    restored the controlfile and then
    RESTORE DATABASE FROM TAG 'TAGxxxxxxxxxx';
    Now I'm restoring it and it's taking too much time. When checking alert log it says:
    ORA-51106: check failed to complete due to an error. See error below
    ORA-48318: ADR Relation [HM_FINDING] of version=3 cannot be supported
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/oracle1/oradata/******/redo1_02.log'
    ORA-27037: unable to obtain file status
    HPUX-ia64 Error: 2: No such file or directory
    Additional information: 3
    RMAN is still in progress, why does it complain about redo?
    I'm not doing recovery since it was a cold backup.
    Thanks in advance.

    Hi Michael,
    Yes, it's the correct one because it says "full restore complete":
    ORA-00312: online log 1 thread 1: '/oracle1/oradata/******/redo1_01.log'
    ORA-27037: unable to obtain file status
    HPUX-ia64 Error: 2: No such file or directory
    Additional information: 3
    Tue Apr 30 14:38:14 2013
    Full restore complete of datafile 32 /oracle1/oradata/******/apr_sesm_index_01.dbf. Elapsed time: 1:25:42
    checkpoint is 12652187135448
    last deallocation scn is 12651877642745
    Tue Apr 30 15:38:04 2013
    Full restore complete of datafile 34 /oracle1/oradata/******/apr_stage_data_01.dbf. Elapsed time: 6:42:52
    checkpoint is 12652187135448
    last deallocation scn is 12651877637877
    thanks,

  • Restore from cold backup (rac server)

    Hi All,
    Oracle version : 10g
    OS : SunOS dixie1 5.10 Generic_118855-36 i86pc i386 i86pc
    I am having cold backup of RAC server (2 nodes), I want to restore from cold backup.
    The problem is that : when i performed the cold backup using rman at that time Oracle was having 3 ASM diskgroups.But unforunately that disk is no more in use due to some fault.
    Now my question is how can i restore from the cold backup as when i'll restore from the cold backup this will ask for the same ASM diskgroups.Even more if i creates the same diskgroup with the same name and same configuration then my doubt is that rman will allow me to restore the same from the cold backup as ASM disk header changed now ?
    Thanks,
    Vipin

    VipinK wrote:
    Hi All,
    Oracle version : 10g
    OS : SunOS dixie1 5.10 Generic_118855-36 i86pc i386 i86pc
    I am having cold backup of RAC server (2 nodes), I want to restore from cold backup.
    The problem is that : when i performed the cold backup using rman at that time Oracle was having 3 ASM diskgroups.But unforunately that disk is no more in use due to some fault.
    Now my question is how can i restore from the cold backup as when i'll restore from the cold backup this will ask for the same ASM diskgroups.Even more if i creates the same diskgroup with the same name and same configuration then my doubt is that rman will allow me to restore the same from the cold backup as ASM disk header changed now ?
    Yes.You can do these and restore/recover your database.First you need startup your ASM instance then create your ASM disk groups and do following:
    1.Edit pfile and change controlfile location to diskgroup(Consder that +dgr1)
    2.Restore controlfile to this disk group using backup of controlfiles(you say that is cold backup)
    rman target /
    /*Instance  need starting up from pfile*/
    startup nomount ;
    /*then restore controlfile,give full path of controlfile from coldbackup*/
    restore controlfile from 'coldbackup_location\coltrolfile';
    alter database mount;
    catalog start with 'coldbackup_location';
    backup as copy database format  '+dgr1';
    switch database to copy;
    alter database open;

  • Problem with restoring a database from cold backup

    All,
    I've got a 10.2.0.4 database that we perform a cold backup on every night with RMAN. On Sunday 2/21, we have level 0 backup. On Monday-Wednesday nights, we take a cold level 1. We also perform a controlfile auto backup each night.
    On a second server where I want to restore the database (same version of Oracle 10.2.0.4), I've copied the control file auto backups, the level 0 and the most recent level 1. I now want to restore. I use an RMAN script similar to the following to restore the control files:
    connect target /;
    set dbid 1973354860;
    # Restore the controlfile from the tag that auto backed up the controlfile at the end of the level 0
    run
    startup nomount;
    allocate channel c1 type disk;
    restore controlfile to '/u01/app/oracle/oradata/ORADB1/control01.ctl' from AUTOBACKUP;
    restore controlfile to '/u02/app/oracle/oradata/ORADB1/control02.ctl' from AUTOBACKUP;
    restore controlfile to '/u03/app/oracle/oradata/ORADB1/control03.ctl' from AUTOBACKUP;
    release channel c1;
    shutdown immediate;
    After the control files restore successfully, I perform some RMAN checks to ensure that all of the files I need for a recovery are there. The RMAN> list backup of database; command shows all of my backup savesets as AVAILABLE for the level0 and level1 backups.
    I then try a restore database command; and get the following errors:
    RMAN> run
    2> {
    3> allocate channel c1 type disk;
    4> allocate channel c2 type disk;
    5> allocate channel c3 type disk;
    6> allocate channel c4 type disk;
    7> restore database from tag='TAG20100221T200045';
    8> }
    using target database control file instead of recovery catalog
    allocated channel: c1
    channel c1: sid=74 devtype=DISK
    allocated channel: c2
    channel c2: sid=70 devtype=DISK
    allocated channel: c3
    channel c3: sid=166 devtype=DISK
    allocated channel: c4
    channel c4: sid=168 devtype=DISK
    Starting restore at 25-FEB-10
    released channel: c1
    released channel: c2
    released channel: c3
    released channel: c4
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 02/25/2010 13:33:19
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 44 found to restore
    RMAN-06023: no backup or copy of datafile 43 found to restore
    RMAN-06023: no backup or copy of datafile 42 found to restore
    RMAN-06023: no backup or copy of datafile 40 found to restore
    RMAN-06023: no backup or copy of datafile 39 found to restore
    RMAN-06023: no backup or copy of datafile 38 found to restore
    RMAN-06023: no backup or copy of datafile 37 found to restore
    RMAN-06023: no backup or copy of datafile 36 found to restore
    RMAN-06023: no backup or copy of datafile 35 found to restore
    RMAN-06023: no backup or copy of datafile 34 found to restore
    RMAN-06023: no backup or copy of datafile 33 found to restore
    RMAN-06023: no backup or copy of datafile 32 found to restore
    RMAN-06023: no backup or copy of datafile 31 found to restore
    RMAN-06023: no backup or copy of datafile 30 found to restore
    RMAN-06023: no backup or copy of datafile 29 found to restore
    RMAN-06023: no backup or copy of datafile 28 found to restore
    RMAN-06023: no backup or copy of datafile 27 found to restore
    RMAN-06023: no backup or copy of datafile 26 found to restore
    RMAN-06023: no backup or copy of datafile 25 found to restore
    RMAN-06023: no backup or copy of datafile 24 found to restore
    RMAN-06023: no backup or copy of datafile 23 found to restore
    RMAN-06023: no backup or copy of datafile 22 found to restore
    RMAN-06023: no backup or copy of datafile 21 found to restore
    RMAN-06023: no backup or copy of datafile 20 found to restore
    RMAN-06023: no backup or copy of datafile 19 found to restore
    RMAN-06023: no backup or copy of datafile 18 found to restore
    RMAN-06023: no backup or copy of datafile 17 found to restore
    RMAN-06023: no backup or copy of datafile 16 found to restore
    RMAN-06023: no backup or copy of datafile 15 found to restore
    RMAN-06023: no backup or copy of datafile 14 found to restore
    RMAN-06023: no backup or copy of datafile 13 found to restore
    RMAN-06023: no backup or copy of datafile 12 found to restore
    RMAN-06023: no backup or copy of datafile 11 found to restore
    RMAN-06023: no backup or copy of datafile 10 found to restore
    RMAN-06023: no backup or copy of datafile 9 found to restore
    RMAN-06023: no backup or copy of datafile 8 found to restore
    RMAN-06023: no backup or copy of datafile 7 found to restore
    RMAN-06023: no backup or copy of datafile 6 found to restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    RMAN>
    But I know from the RMAN crosscheck and list backup commands that the savesets are available on disk. For example:
    RMAN> list backup of datafile 1;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4875 Incr 0 4.37G DISK 00:22:53 21-FEB-10
    BP Key: 4875 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4929_piece_1_date_20100221_711578185
    List of Datafiles in backup set 4875
    File LV Type Ckp SCN Ckp Time Name
    1 0 Incr 5086110241948 21-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4894 Incr 1 1.92G DISK 00:13:46 24-FEB-10
    BP Key: 4894 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4949_piece_1_date_20100224_711836434
    List of Datafiles in backup set 4894
    File LV Type Ckp SCN Ckp Time Name
    1 1 Incr 5086113791743 24-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
    RMAN> list backup of datafile 44; (the first one in the list above)
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4872 Incr 0 7.15G DISK 00:35:17 21-FEB-10
    BP Key: 4872 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4927_piece_1_date_20100221_711576046
    List of Datafiles in backup set 4872
    File LV Type Ckp SCN Ckp Time Name
    44 0 Incr 5086110241948 21-FEB-10 /u04/app/oracle/oradata/ORADB1/NETINSIGHT_INDEXES_03.dbf
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4893 Incr 1 4.06G DISK 00:26:52 24-FEB-10
    BP Key: 4893 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4947_piece_1_date_20100224_711835238
    List of Datafiles in backup set 4893
    File LV Type Ckp SCN Ckp Time Name
    44 1 Incr 5086113791743 24-FEB-10 /u04/app/oracle/oradata/ORADB1/NETINSIGHT_INDEXES_03.dbf
    As you can see, the level 0 and level 1 backups are showing as available. To double check, I perform a crosscheck backup of database;
    RMAN> crosscheck backup of database;
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=74 devtype=DISK
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4927_piece_1_date_20100221_711576046 recid=4872 stamp=711576046
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4928_piece_1_date_20100221_711576046 recid=4873 stamp=711576046
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4930_piece_1_date_20100221_711578189 recid=4874 stamp=711578189
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4929_piece_1_date_20100221_711578185 recid=4875 stamp=711578186
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4932_piece_1_date_20100221_711579570 recid=4876 stamp=711579570
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4931_piece_1_date_20100221_711579392 recid=4877 stamp=711579393
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4934_piece_1_date_20100221_711580369 recid=4878 stamp=711580370
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4935_piece_1_date_20100221_711580535 recid=4879 stamp=711580535
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4933_piece_1_date_20100221_711580122 recid=4880 stamp=711580123
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4948_piece_1_date_20100224_711835237 recid=4892 stamp=711835238
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4947_piece_1_date_20100224_711835238 recid=4893 stamp=711835238
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4949_piece_1_date_20100224_711836434 recid=4894 stamp=711836436
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4950_piece_1_date_20100224_711836866 recid=4895 stamp=711836866
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4951_piece_1_date_20100224_711837267 recid=4896 stamp=711837268
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4952_piece_1_date_20100224_711837971 recid=4897 stamp=711837972
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4953_piece_1_date_20100224_711837989 recid=4898 stamp=711837989
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4955_piece_1_date_20100224_711838522 recid=4899 stamp=711838522
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4954_piece_1_date_20100224_711838520 recid=4900 stamp=711838521
    Crosschecked 18 objects
    RMAN>
    So I'm unclear as to why RMAN believes the backups of these files don't exist when I attempt to restore the database. Anyone have a clue?
    NOTE: I've also tried to restore spcifically with the tag= clause but I get the same results:
    RMAN> restore database from tag='TAG20100221T200045';
    Starting restore at 25-FEB-10
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 02/25/2010 13:41:04
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 44 found to restore
    RMAN-06023: no backup or copy of datafile 43 found to restore
    RMAN-06023: no backup or copy of datafile 42 found to restore
    RMAN-06023: no backup or copy of datafile 40 found to restore
    RMAN-06023: no backup or copy of datafile 39 found to restore
    RMAN-06023: no backup or copy of datafile 38 found to restore
    RMAN-06023: no backup or copy of datafile 37 found to restore
    RMAN-06023: no backup or copy of datafile 36 found to restore
    RMAN-06023: no backup or copy of datafile 35 found to restore
    RMAN-06023: no backup or copy of datafile 34 found to restore
    RMAN-06023: no backup or copy of datafile 33 found to restore
    RMAN-06023: no backup or copy of datafile 32 found to restore
    RMAN-06023: no backup or copy of datafile 31 found to restore
    RMAN-06023: no backup or copy of datafile 30 found to restore
    RMAN-06023: no backup or copy of datafile 29 found to restore
    RMAN-06023: no backup or copy of datafile 28 found to restore
    RMAN-06023: no backup or copy of datafile 27 found to restore
    RMAN-06023: no backup or copy of datafile 26 found to restore
    RMAN-06023: no backup or copy of datafile 25 found to restore
    RMAN-06023: no backup or copy of datafile 24 found to restore
    RMAN-06023: no backup or copy of datafile 23 found to restore
    RMAN-06023: no backup or copy of datafile 22 found to restore
    RMAN-06023: no backup or copy of datafile 21 found to restore
    RMAN-06023: no backup or copy of datafile 20 found to restore
    RMAN-06023: no backup or copy of datafile 19 found to restore
    RMAN-06023: no backup or copy of datafile 18 found to restore
    RMAN-06023: no backup or copy of datafile 17 found to restore
    RMAN-06023: no backup or copy of datafile 16 found to restore
    RMAN-06023: no backup or copy of datafile 15 found to restore
    RMAN-06023: no backup or copy of datafile 14 found to restore
    RMAN-06023: no backup or copy of datafile 13 found to restore
    RMAN-06023: no backup or copy of datafile 12 found to restore
    RMAN-06023: no backup or copy of datafile 11 found to restore
    RMAN-06023: no backup or copy of datafile 10 found to restore
    RMAN-06023: no backup or copy of datafile 9 found to restore
    RMAN-06023: no backup or copy of datafile 8 found to restore
    RMAN-06023: no backup or copy of datafile 7 found to restore
    RMAN-06023: no backup or copy of datafile 6 found to restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore

    Just as a follow on to my last post, after the RMAN-06023 messages, I list backups of the three datafiles and as you can see RMAN thinks that they are available. If I exit RMAN and list them at the OS level, they are where RMAN things they should be:
    RMAN> restore database;
    Starting restore at 25-FEB-10
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 02/25/2010 16:17:39
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    RMAN> list backup of datafile 4;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4880 Incr 0 1.36G DISK 00:08:57 21-FEB-10
    BP Key: 4880 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4933_piece_1_date_20100221_711580122
    List of Datafiles in backup set 4880
    File LV Type Ckp SCN Ckp Time Name
    4 0 Incr 5086110241948 21-FEB-10 /u02/app/oracle/oradata/ORADB1/users01.dbf
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4890 Incr 1 934.82M DISK 00:09:42 22-FEB-10
    BP Key: 4890 Status: AVAILABLE Compressed: YES Tag: TAG20100222T200047
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4943_piece_1_date_20100222_711664989
    List of Datafiles in backup set 4890
    File LV Type Ckp SCN Ckp Time Name
    4 1 Incr 5086111401249 22-FEB-10 /u02/app/oracle/oradata/ORADB1/users01.dbf
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4898 Incr 1 947.57M DISK 00:08:49 24-FEB-10
    BP Key: 4898 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4953_piece_1_date_20100224_711837989
    List of Datafiles in backup set 4898
    File LV Type Ckp SCN Ckp Time Name
    4 1 Incr 5086113791743 24-FEB-10 /u02/app/oracle/oradata/ORADB1/users01.dbf
    RMAN>
    RMAN> list backup of datafile 3;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4874 Incr 0 2.65G DISK 00:19:50 21-FEB-10
    BP Key: 4874 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4930_piece_1_date_20100221_711578189
    List of Datafiles in backup set 4874
    File LV Type Ckp SCN Ckp Time Name
    3 0 Incr 5086110241948 21-FEB-10 /u02/app/oracle/oradata/ORADB1/sysaux01.dbf
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4885 Incr 1 1.95G DISK 00:15:54 22-FEB-10
    BP Key: 4885 Status: AVAILABLE Compressed: YES Tag: TAG20100222T200047
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4940_piece_1_date_20100222_711663910
    List of Datafiles in backup set 4885
    File LV Type Ckp SCN Ckp Time Name
    3 1 Incr 5086111401249 22-FEB-10 /u02/app/oracle/oradata/ORADB1/sysaux01.dbf
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4895 Incr 1 1.97G DISK 00:18:13 24-FEB-10
    BP Key: 4895 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4950_piece_1_date_20100224_711836866
    List of Datafiles in backup set 4895
    File LV Type Ckp SCN Ckp Time Name
    3 1 Incr 5086113791743 24-FEB-10 /u02/app/oracle/oradata/ORADB1/sysaux01.dbf
    RMAN>
    RMAN>
    RMAN> list backup of datafile 1;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4875 Incr 0 4.37G DISK 00:22:53 21-FEB-10
    BP Key: 4875 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4929_piece_1_date_20100221_711578185
    List of Datafiles in backup set 4875
    File LV Type Ckp SCN Ckp Time Name
    1 0 Incr 5086110241948 21-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4884 Incr 1 1.93G DISK 00:12:34 22-FEB-10
    BP Key: 4884 Status: AVAILABLE Compressed: YES Tag: TAG20100222T200047
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4939_piece_1_date_20100222_711663601
    List of Datafiles in backup set 4884
    File LV Type Ckp SCN Ckp Time Name
    1 1 Incr 5086111401249 22-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    4894 Incr 1 1.92G DISK 00:13:46 24-FEB-10
    BP Key: 4894 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
    Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4949_piece_1_date_20100224_711836434
    List of Datafiles in backup set 4894
    File LV Type Ckp SCN Ckp Time Name
    1 1 Incr 5086113791743 24-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
    RMAN> exit
    $ ls -ltr /u03/oracle_backups/ORADB1/offline
    total 59743688
    -rwx------ 1 oracle oinstall 7677960192 2010-02-25 11:13 ORADB1_level0_set_4927_piece_1_date_20100221_711576046
    -rwx------ 1 oracle oinstall 7980834816 2010-02-25 11:24 ORADB1_level0_set_4928_piece_1_date_20100221_711576046
    -rwx------ 1 oracle oinstall 4691853312 2010-02-25 11:29 ORADB1_level0_set_4929_piece_1_date_20100221_711578185
    -rwx------ 1 oracle oinstall 2847391744 2010-02-25 11:34 ORADB1_level0_set_4930_piece_1_date_20100221_711578189
    -rwx------ 1 oracle oinstall 3530924032 2010-02-25 11:39 ORADB1_level0_set_4931_piece_1_date_20100221_711579392
    -rwx------ 1 oracle oinstall 1566449664 2010-02-25 11:41 ORADB1_level0_set_4932_piece_1_date_20100221_711579570
    -rwx------ 1 oracle oinstall 1459781632 2010-02-25 11:43 ORADB1_level0_set_4933_piece_1_date_20100221_711580122
    -rwx------ 1 oracle oinstall 561774592 2010-02-25 11:44 ORADB1_level0_set_4934_piece_1_date_20100221_711580369
    -rwx------ 1 oracle oinstall 58753024 2010-02-25 11:44 ORADB1_level0_set_4935_piece_1_date_20100221_711580535
    -rwx------ 1 oracle oinstall 4364124160 2010-02-25 11:56 ORADB1_level1_set_4947_piece_1_date_20100224_711835238
    -rwx------ 1 oracle oinstall 2971877376 2010-02-25 12:01 ORADB1_level1_set_4948_piece_1_date_20100224_711835237
    -rwx------ 1 oracle oinstall 2066546688 2010-02-25 12:03 ORADB1_level1_set_4949_piece_1_date_20100224_711836434
    -rwx------ 1 oracle oinstall 2119360512 2010-02-25 12:06 ORADB1_level1_set_4950_piece_1_date_20100224_711836866
    -rwx------ 1 oracle oinstall 1003356160 2010-02-25 12:06 ORADB1_level1_set_4951_piece_1_date_20100224_711837267
    -rwx------ 1 oracle oinstall 1637105664 2010-02-25 12:08 ORADB1_level1_set_4952_piece_1_date_20100224_711837971
    -rwx------ 1 oracle oinstall 993607680 2010-02-25 12:08 ORADB1_level1_set_4953_piece_1_date_20100224_711837989
    -rwx------ 1 oracle oinstall 1130496 2010-02-25 12:09 ORADB1_level1_set_4955_piece_1_date_20100224_711838522
    -rwx------ 1 oracle oinstall 283344896 2010-02-25 12:09 ORADB1_level1_set_4954_piece_1_date_20100224_711838520
    -rwx------ 1 oracle oinstall 4344365056 2010-02-25 16:01 ORADB1_level1_set_4937_piece_1_date_20100222_711662448
    -rwx------ 1 oracle oinstall 2959015936 2010-02-25 16:05 ORADB1_level1_set_4938_piece_1_date_20100222_711662448
    -rwx------ 1 oracle oinstall 2067202048 2010-02-25 16:07 ORADB1_level1_set_4939_piece_1_date_20100222_711663601
    -rwx------ 1 oracle oinstall 2089304064 2010-02-25 16:08 ORADB1_level1_set_4940_piece_1_date_20100222_711663910
    -rwx------ 1 oracle oinstall 955711488 2010-02-25 16:09 ORADB1_level1_set_4941_piece_1_date_20100222_711664370
    -rwx------ 1 oracle oinstall 1623564288 2010-02-25 16:11 ORADB1_level1_set_4942_piece_1_date_20100222_711664872
    -rwx------ 1 oracle oinstall 980238336 2010-02-25 16:12 ORADB1_level1_set_4943_piece_1_date_20100222_711664989
    -rwx------ 1 oracle oinstall 280952832 2010-02-25 16:12 ORADB1_level1_set_4944_piece_1_date_20100222_711665385
    -rwx------ 1 oracle oinstall 1130496 2010-02-25 16:12 ORADB1_level1_set_4945_piece_1_date_20100222_711665521

  • Database Restore from COLD Backup

    Dear all,
    I .m trying to restore a production database from a COLD backup. Before the COLD BAckup, we have take a HOT backup as usual and then shutdown the database to perform the Cold Backup.
    After restirong all the oracle files and arch redo log, i have tried to restart the datbase but it failed with the followgin error message:
    SVRMGR> connect internal
    Connected.
    SVRMGR> startup
    ORACLE instance started.
    Total System Global Area 625729520 bytes
    Fixed Size 69616 bytes
    Variable Size 133795840 bytes
    Database Buffers 491520000 bytes
    Redo Buffers 344064 bytes
    Database mounted.
    ORA-01113: file 1 needs media recovery
    ORA-01110: data file 1: '/usr/oracle/8.1.6/disk1/IF1/system01.dbf'
    SVRMGR> exit
    Server Manager complete.
    root@dbserver#su - oracle
    Sun Microsystems Inc. SunOS 5.8 Generic Patch October 2001
    Then i have recovered but it seems that the Oracle process do not started and here is what i have found in alert log file:
    Errors in file /usr/oracle/8.1.6/admin/IF1/bdump/if1_smon_609.trc:
    ORA-00600: internal error code, arguments: [4194], [52], [52], [], [], [], [], []
    Mon Mar 8 11:42:46 2004
    Recovery of Online Redo Log: Thread 1 Group 1 Seq 29954 Reading mem 0
    Mem# 0 errs 0: /usr/oracle/8.1.6/disk2/IF1/redo1a.rdo
    SMON: terminating instance due to error 600
    Instance terminated by SMON, pid = 609
    WARNING! Recovering data file 1 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 2 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 3 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 4 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 5 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 7 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 8 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 9 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 26 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 27 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 29 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 31 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 34 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 36 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 40 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 43 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 49 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 53 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 54 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 55 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    WARNING! Recovering data file 58 from a fuzzy backup. It might be an online
    backup taken without entering the begin backup command.
    Media Recovery Log
    Could someone explain to me what i did wrong?
    Thank you
    ORA-01113
    ORA-01110
    ORA-00600: internal error code, arguments: [4194], [52], [52], [], [], [], [], []

    Please do not confuse between the backup copies you have. Ensure that you have the latest copy whether cold or hot. If you have COLD copy then simply replace all the data files, redo log files, and the control files and start the database it should start. I do not understand your back up strategy because if you have a Hot backup then why do you need a cold backup. Please let me know in what mode your database is running?
    Regards,
    DJ

Maybe you are looking for

  • Can you change the hotkeys in Apple DVD Player?

    I'm trying to change the hotkeys in Apple DVD Player. Really, all I want to do is add a hotkey for slow motion. I need the hotkeys because I'm using a ShuttleXpress shuttle mouse and I want to beable to click a button to put it in slow motion instead

  • How can I integration BPM with OWC spaces

    I use BPM 11g PS4 (11.1.1.5) and I want to integrate my process spaces and displayed in webcenter spaces. I read and practice from http://andrejusb.blogspot.com/2011/02/bpm-portal-11g-ps3-how-to-configure.html and http://andrejusb.blogspot.com/2010/1

  • Port is not listening

    10.6.8 X-serve.  I have an app that requires ports 9100 and 9200 to be open.  I have added these ports to the server firewall to enable.  Started and stopped the sever firewall.  My app is unable to connect via these two ports.  Through terminal nets

  • ITunes randomly loses the location info for my songs. How can I stop this and how can I get everything linked back to itunes easily?

    ITunes ranodmly loses the location info for my songs. How can I stop this from happening? How can I get all of my song locations linked back to iTunes without individually pointing to the location of each one?

  • Icloud freezing on adding contacts on my pc

    I am trying to add contacts to icloud on my PC, icloud keep freezing up and will not let me type anything. When I do manage to add someone it does sync ok to my iphone. It's getting them in there that is the problem.