Cold-Failover with Oracle Weblogic Server 10 R3

Hi ALL,
It is possible to configure cold-failover using Oracle Weblogic Server?/
- 2 instances with the same ip, if one fails the second will run
- Not comunication between nodes like in normal cluster
Thanks

Hello All,
Have anybody configured auto server migration for cold failover?
I have a few questions regarding this setup, any help is much appreciated.
1. for the floating ips to work, do I need 2 NICS and two cables on each server?
2. Do I have to configure 2 different ips on one interface, which will be used as node manager listen address's for each of the 2 machines?
3. What will be the listen address of each of these servers(primary server & failover server)? Is it the floating ip address? or empty (all local addresses)?
4. can we start both the primary server & failover server so when primary goes down, the failover will be quick?
Thanks,
Chandra

Similar Messages

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

Configuring Apache HTTP Server with Oracle Weblogic Server plugin

Hello friends,
I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
*************************************************log****************************************************
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431>
================New Request: [GET /images/cab.gif HTTP/1.1] =================
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
secondaryJVMID: [NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Thanks

"One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
with server 3 going down it does 1-2-1-2-1...
An example configuration (with SSL off) looks as follows:
LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
<IfModule weblogic_module>
     ConnectTimeoutSecs 10
     ConnectRetrySecs 2
     DebugConfigInfo ON
     WLSocketTimeoutSecs 2
     WLIOTimeoutSecs 300
     Idempotent ON
     FileCaching ON
     KeepAliveSecs 20
     KeepAliveEnabled ON
     DynamicServerList ON
     WLProxySSL OFF
</IfModule>
<Location /LoadTest6>
     SetHandler weblogic-handler
     WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
</Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
"the plugin sometimes redirects to the other active node"
This is somewhat strange, do you have session binding turned off?
"and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

Deployment Manager Error with Oracle Weblogic Server

Hi,
Every time i try to open nexaweb client for Import/Export. I get the following error:-
"Either your session timed out or you are trying to access a page without logging in." .
Are there any other permission I'm suppose to grant nexaweb through Welogic admin control?

I still had no luck with neither
* Weblogic 10.3 (the import applet doesn't match the authentication in the web application, no matter which JDK 5/6 I set in the browser or if I use IE instead of FireFox)
* OC4J (downloaded from the oracle.com): the install_server.sh script complains about the server not being running (while I can shutdown it by RMI console with no problem using the same username/password/RMI port).
Instead I tried JBoss 4.2.3 (downloaded from jboss.com) and unzipped it:install_server.sh works without problem just saying
You must copy the .xldatabasekey file from the \xellerate\config\ directory of the original installation to the \xellerate\config\ directory of the current installation.
+.xldatabasekeyThe Oracle Identity Manager installation log file is located at /opt/oracle/app/middleware/oim/xellerate/logs.+
Which is due to the fact that i previously configured weblogic: so I copied it from my OIM Weblogic installation:
cp ./oim.weblogic/xellerate/config/.xldatabasekey oim/xellerate/config/
Run the OIM-ized JBoss instance and, voila'!, the import applet now perfectly recognizes my logged in user and I can now proceed with my real work ... just thinking that I lost 4 days around configuring the OIM server with Weblogic ...

Starting oracle weblogic server as windows Service

hi dear friends,
i am working with oracle Weblogic server 10.3 and oracle Jdeveloper 11g
i have an Ear file and deployed it on weblogic server and that work truly
now,i want to start my server with windows Services
for this goal i read some of the documents and created a windows service for my server
when i started windows Service of the server just console of weblogic is start
when i used debug mode for checking errors
i saw bottom errors:
java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\NEWORA~1\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<Jul 26, 2009 9:09:32 AM IRDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\NEWORA~1\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<Jul 26, 2009 9:09:33 AM IRDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 26, 2009 9:09:33 AM IRDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 26, 2009 9:09:34 AM IRDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'requestEar' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
how do solve their?

hi
i used your recommendation and set %WL_HOME%\common\bin\*commEnv.cmd to my path
in this case when i am starting service of my server from windows Service console
and then checked Deployment Files on my server
i saw my EAR File could not start and it state was failed
when i started from weblogic console
it had error deploying time
that error was :
weblogic.common.ResourceException: weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was: Locale not recognized
how do i solve it
regards
aghaluie

Oracle Standard Edition 1 / Oracle WebLogic Server 11g Standand Edition

Can anyone tell me if WebLogic Server 11g Standard Edition can be used for installations that use the "Oracle Standard Edition 1" of the database?
If so what sort of licensing costs would be associated with Oracle WebLogic Server 11g Standard Edition?
Thanks!

Can anyone tell me if WebLogic Server 11g Standard Edition can be used for installations that use the "Oracle Standard Edition 1" of the database?
If so what sort of licensing costs would be associated with Oracle WebLogic Server 11g Standard Edition?
Thanks!

Installing Oracle SOA Suite with the WebLogic Server

Hi all,
I am trying to install Oracle SOA Suite with the WebLogic Server. After following the step-by-step instruction in the "Installing Oracle SOA Suite with the WebLogic Server" document, I ran into the following situation: I have a working WebLogic Server with all applications deployed. However the BPELPM application is in Failed state.
When I try to run the application, I get following exception (AdminServer.log):
####<Mar 30, 2009 9:46:43 AM EEST> <Warning> <Deployer> <javadev2> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1238395603163> <BEA-149004> <Failures were detected while initiating start task for application 'BPELPM'.>
####<Mar 30, 2009 9:46:43 AM EEST> <Warning> <Deployer> <javadev2> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1238395603164> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: [HTTP:101216]Servlet: "cxloader" failed to preload on startup in Web application: "/orabpel".
javax.servlet.ServletException:
ORABPEL START-UP ERROR!!!!!!!!
OraBPEL run-time system failed to start due to exception:
Bean is already undeployed.
at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:87)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:278)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:507)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1723)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1700)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1620)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2761)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:889)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:333)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:891)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:333)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Any help would be highly appreciated.
Boris

Hi Boris,
Looks like you have not run the post upgrade script for 10.1.3.4.
You need to install SOA 10.1.3.4 Basic Installation. Then start following : http://download.oracle.com/docs/cd/E12524_01/core.1013/e13058/weblogic.htm#BHCIIBFB
You basically, first install 10.1.3.4 basic SOA install, Apply the Opatch 7337034 (HOTPLUG: SOASUITE 10.1.3.4 ON WEBLOGIC 9.2 - CHANGES FOR HOTPLUGGABILITY). Install WLS 9.2 MP3.
Now, Download the Oracle SOA Suite 10.1.3.4 WebLogic Server 9.2 : patch : 7490612.
Then , Modify the following mandatory installation properties in the Weblogic_SOA10134_Base\SOADomain.properties file as per the documentation above.
Cheers
Anirudh Pucha

Is Oracle Weblogic server 10.3 compatible with jdk 1.5.0?

When i point 1.5.0 JDK version to Oracle Weblogic server 10.3 "Bad version number in .class file" error is thrown while starting the server.
can any one help me to resolve this issue?
Edited by: user10643892 on Nov 23, 2008 10:40 PM

Hi, there.
You are right. The overview page has no clear statement on JDK. However, if you look into the supported operating system links, you'll find only JDK 6 is supported. Example for Solaris:
http://edocs.bea.com/platform/suppconfigs/configs/solaris/solaris10_103.html
Note that there is support for JDK 5 clients, which may be useful to you:
http://e-docs.bea.com/wls/docs103/notes/new.html#wp1090981
I hope this answers your question.
Cheers,
-Adrian

Oracle Identity Manager 9.1.0.2 and Oracle Weblogic server 11g R1 b(10.3.1)

Hi,
can we Install Oracle Identity Manager 9.1.0.2 version on Oracle Weblogic server 11h R1 b(10.3.1)?
Is it OIM 9.1.0.2 compatible to install on Oracle Weblogic server 11h R1 b(10.3.1).
Early response is appreciated

Check this
http://www.oracle.com/technology/software/products/ias/files/idm_certification_101401.html#BABGBGHI
And Oracle has mentioned that
*2.1 Certified Application Servers*
Note: There is no change in application server certification from
release 9.1.0.1 to release 9.1.0.2.
Oracle WebLogic Server 10.3
But you can try with new version of Weblogic. It shouldn't create any problem.

Oracle WebLogic Server 9.2 MP4 - license error

Hi,
I have installed Oracle WebLogic Server 9.2 MP4 on my dev/test server, while starting the server in production mode getting licensed validation error, can any body help on this please.
downloaded 9.2 MP4 from this location (http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html)
<20-Jun-2011 09:04:38 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
Unable to start WebLogic Server!
Exception occurred while reading the license file.
Please make sure you have a valid license.bea
file in the BEA home directory associated with this
installation. For more information about the license.bea
file, see the installation guide for the version of the
software you are using at http://e-docs.bea.com.
Thanks

Hi,
I was able to figure out the root cause. I was using the primitive data type "int" for primary key and foreign key for one of the beans in the relationship. After I changed it to "Integer" wrapper type, the issue got resolved.
-Vinod

Oracle WebLogic Server - Oracle Spatial NDM-LOD Implementation

Hi,
I have a Network Data Model using Load on Demand approach implementation in Oracle WebLogic Server. Upon uploading of the java web service to my WebLogic Server, everything works fine and I can do network analysis functions using the LOD API.
My problem is, whenever I add additional data to my Nodes and Links table, or I totally deleted all records in my Nodes and Links and repopulated the table with new data, I encounter the error Start node cannot be found.
This are my sample screenshots for your reference.
Initial Uploading of Java Web Service (Network Analysis Functions are working):
http://sdrv.ms/1i3Gw6s
After I Deleted all Nodes and Links data and repopulate new Network Data, I encounter Start node cannot be found:
http://sdrv.ms/1i3FDuM
But if you are going to look at my Node Table below, the node is existing in the database.
http://sdrv.ms/1i3G8F4
The only solution that I found to resolve this error is to update or redeploy the Java Web Service that have my Network Analysis functions. But this solution is basically not acceptable since my network data is constantly changing and more nodes and links are being added everyday.
Does anyone have any Idea on how to resolve this without updating or redeploying my Java Web Service?

Hi,
I would like to follow-up with my inquiry above.

Silent install of Oracle WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE

Hi, I'm trying to deploy the Oracle WebLogic Server 11R1 (10.3.6) on multiple computers. So I created a silent.xml file to use in my silent installation. The xml file appears to have the correct syntax. But when I launch the command: oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32.exe -mode=silent -silent_xml="C:\Temp\silent.xml" -log="C:\Temp\silent-install.log", it crash with these 2 errors.
ERROR [readSilentXML] com.bea.plateng.wizard.installer.common.parsers.TemplateParser - Got an error in parsing template.xml!
ERROR [readSilentXML] com.bea.plateng.wizard.installer.silent.tasks.ReadSilentXMLTask - java.lang.NullPointerException
Here's the content of my xml file.
<?xml version="1.0" encoding="UFF-8"?>
<bea-installer>
<input-fields>
<data-value name="BEAHOME" value="C:\Oracle\Middleware_Home" />
<data-value name="WLS_INSTALL_DIR" value="C:\Oracle\Middleware_Home\wlserver_10.3" />
<data-value name="INSTALL_NODE_MANAGER_SERVICE" value="yes" />
<data-value name="NODEMGR_PORT" value="5559" />
<data-value name="INSTALL_SHORTCUT_IN_ALL_USERS_FOLDER" value="yes" />
</input-fields>
</bea-installer>
I need to deploy it to Windows 7 Ent SP1 x64 computers. So I sure like to know what I'm doing wrong?!
Note: I didn't use the value COMPONENT_PATHS because I want to install everything.
Thanks in advance for the help!

I solved the problem myself. I think I was missing my caffeine ;-) <?xml version="1.0" encoding="*UFF-8*"?>
Have a good day!

Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start

I am trying to run .portal file using "Run on server" option in Workshop for weblogic.
After doing this, its trying to start the server Oracle weblogic server v10.3 at localhost and then publish my module.
Server view status shows as "State" as "Starting" and "Status" as "Synchronizing". When status reaches 82% it gets stopped there for a long time, and when 83% comes up, I can see the "State" as "Stopped" and "Status" as "Republish". And then an error window with title as "Problem Occured" and contents saying, Starting server- Oracle weblogic server v10.3 at localhost (Time of error: ...) Details >> Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start. Server did not start after 480s.
But the console tab (when I give the startup & Deployment option as "Launch Weblogic server in eclipse console) shows,
<Sep 8, 2011 6:15:03 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
e changed to STARTING> (final step alone I pasted)
Before this I can see, WLS Start mode = Development, setting Classpath ,
<Sep 8, 2011 5:56:36 PM IST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\user_projects\domains\myPortalDomain\servers\AdminServer\logs\Ad
minServer.log is opened. All server side log events will be written to this file
.>
When I checked Adminserver file its having,
<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315487671986> <BEA-160151> <Registered library Extension-Name: wlp-groupspace-app-lib, Specification-Version: 10.3, Implementation-Version: 10.3.0.1 (EAR).>
And many more similar entries...
Also there is Adminserver.logxxx file which is having,
####<Sep 8, 2011 5:33:58 PM IST> <Warning> <JDBC> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315483438048> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
####<Sep 8, 2011 5:33:58 PM IST> <Info> <JDBC> <CINTNCHEOLY0GX7> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315483438267> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.
     at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
     at com.pointbase.net.netJDBCConnection.a(Unknown Source)
     at com.pointbase.net.netJDBCConnection.<init>(Unknown Source)
     at com.pointbase.net.netJDBCDriver.getConnection(DashoA10*..:170)
     at com.pointbase.net.netJDBCDriver.connect(DashoA10*..:94)
     at com.pointbase.jdbc.jdbcUniversalDriver.getConnection(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.connect(Unknown Source)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:316)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:217)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
     at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2282)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
And many more entries like the above...
I even tried startup & Deployment option as "Start weblogic server in Expressmode" and still same error I am getting and this time instead of in eclipse console, I can see command prompt and here also showing "Server state changed to STARTING"
FYI, I created domain with runtime JRocket 1.6.0_05.
I even tried to clean build the portal project and publish using clean option. Still same problem coming :(
FYI, my system is having 1 GB RAM only and bit slow. Could this be a problem or something else? Please suggest.
Thanks in advance.
Edited by: gopikrish on Sep 8, 2011 6:20 AM

Hi Gopikrish
The root cause for your error is, it is not able to start the Pointbase database. Looks like you configured a domain with default pointbase database. In the domain\bin\ one of the starup scripts like startWeblogic.cmd, you should see some lines that start the pointbase database.
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093
Instead of starting from Workshop, go to the domain root folder and start the weblogic using the command like startWeblogic.cmd (or .sh on unix). This should start the pointbase and then start the portal domain. Portal domain does need this backend pointbase database to store all the portal meta data and has datasources configured for this.
Do you have a Clustered Portal domain, with one of the managed servers located in the remote machine. If yes, and if you use default Pointbase database, you need to change something like pointbase db should not be localhost but the name of the machine where you have the admin server running.
Either way, the issue is not able to stat the pointbase db and thus serve not starting.
Thanks
Ravi Jegga

Oracle JDBC Driver too old in Oracle WebLogic Server 10.3

I check oracle jdbc driver bundles in the Oracle WebLogic Server 10.3
The version is too old,and current version is:
Oracle Database 11g Release 1 (11.1.0.7.0) JDBC Drivers
The question is:
Could we replace the old ojdbc6.jar with the current one (11.1.0.7.0)?
Thanks in advance!

Yes, but be sure the new driver provides the classes registered in Administration Console that are provided by ojdbc6.jar when you configure jdbc resources to Oracle database

Fusion Order demo + Oracle Weblogic Server 10.3.2

Hello,
I am trying to deploy the Fusion Order demo FusionOrderDemo_R1PS1 -> StoreFrontModule version to Oracle Weblogic server 10.3.2 from Jdeveloper,StoreFrontModule application deployed successfully.
But when i tried to run the http:/<host>:7001/StoreFrontModule/faces/home.jspx I dont see any items or links.In server log I see below exceptions
Caused By: java.lang.NullPointerException
at oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1765)
at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1655)
at oracle.adf.model.binding.DCIteratorBinding.internalGetRowSetIterator(DCIteratorBinding.java:1631)
at oracle.adf.model.binding.DCIteratorBinding.refresh(DCIteratorBinding.java:4295)
at oracle.adf.model.binding.DCExecutableBinding.refreshIfNeeded(DCExecutableBinding.java:341)
at oracle.adf.model.binding.DCIteratorBinding.internalGetCurrentRowInBinding(DCIteratorBinding.java:2184)
at oracle.jbo.uicli.binding.JUIteratorBinding.internalGetCurrentRowInBinding(JUIteratorBinding.java:501)
at oracle.adf.model.binding.DCIteratorBinding.getCurrentRow(DCIteratorBinding.java:2171)
at oracle.adf.model.binding.DCControlBinding.getCurrentRow(DCControlBinding.java:388)
at oracle.jbo.uicli.binding.JUControlBinding.getCurrentRow(JUControlBinding.java:98)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGetRow(JUCtrlValueBinding.java:1288)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getInputValue(JUCtrlValueBinding.java:2693)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.getInputValue(JUCtrlValueBinding.java:2682)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding.getInputValue(FacesCtrlAttrsBinding.java:185)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2274)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding.internalGet(FacesCtrlAttrsBinding.java:277)
at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:750)
at javax.el.MapELResolver.getValue(MapELResolver.java:164)
at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
####<Jan 6, 2010 10:49:29 AM CST> <Notice> <Diagnostics> <ozarks> <AdminServer> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1262796569258> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'AdminServer' has triggered at Jan 6, 2010 10:49:29 AM CST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Jan 6, 2010 10:49:29 AM CST SERVER = AdminServer MESSAGE = [ServletContext@948906564[app:StoreFrontModule module:StoreFrontModule path:/StoreFrontModule spec-version:2.5 version:V2.0]] Servlet failed with Exception
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
at oracle.adf.model.binding.DCIteratorBinding.reportException(DCIteratorBinding.java:373)
at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1671)
at oracle.adf.model.binding.DCIteratorBinding.internalGetRowSetIterator(DCIteratorBinding.java:1631)
at oracle.adf.model.binding.DCIteratorBinding.refresh(DCIteratorBinding.java:4295)
at oracle.adf.model.binding.DCExecutableBinding.refreshIfNeeded(DCExecutableBinding.java:341)
at oracle.adf.model.binding.DCIteratorBinding.internalGetCurrentRowInBinding(DCIteratorBinding.java:2184)
at oracle.jbo.uicli.binding.JUIteratorBinding.internalGetCurrentRowInBinding(JUIteratorBinding.java:501)
at oracle.adf.model.binding.DCIteratorBinding.getCurrentRow(DCIteratorBinding.java:2171)
at oracle.adf.model.binding.DCControlBinding.getCurrentRow(DCControlBinding.java:388)
Any idea why??

I run into the same issue that ravi_b had. When i tried to run the http:/<host>:8001/StoreFrontModule/faces/home.jspx I dont see any items or links.
For "host", I am using the IP of SOAHOST1 and port 8001. In server log I see below exceptions, which is similar to rave_b, but not exactly the same,
####<Mar 29, 2010 4:26:22 PM PDT> <Warning> <oracle.adf.controller.faces.lifecycle.Utils> <obie-as1> <WLS_SOA1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1269905182111> <BEA-000000> <ADF: Adding the following JSF error message: Unexpected exception caught: java.lang.NullPointerException, msg=null
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
at oracle.adf.model.binding.DCIteratorBinding.reportException(DCIteratorBinding.java:373)
at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1671)
at oracle.adf.model.binding.DCIteratorBinding.internalGetRowSetIterator(DCIteratorBinding.java:1631)
at oracle.adf.model.binding.DCIteratorBinding.setRangeSize(DCIteratorBinding.java:3307)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3115)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2791)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:112)
at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:192)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:21)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:231)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:267)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:71)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
My do have -Djps.app.credential.overwrite.allowed=true in JAVA_PROPERTIES.
Any idea why I don't see all items?

Cold-Failover with Oracle Weblogic Server 10 R3

Similar Messages

Maybe you are looking for