Coldfusion MX 6.0 Stopped

We have ColdFusion MX 6.0 running on a Windows 2000 server.
On Dec 10th we experienced what appeared to be a "clean" stop of ColdFusion:
This was in the server log: "Information","Thread-0","12/10/09","14:37:42",,"ColdFusion stopped"
We looked in the available logs and found no apparent reason for this stop, no obvious errors, no out of memory errors, etc.
Coldfusion had to manually be restarted.
Has anyone experienced Coldfusion MX stopping on it's own? If so do you know why and how to fix it?
Thanks!

HaHa - yes, this is version 6,0,0,58500
I just started this contract position 5 months ago. They seem to be ok. They reboot every week.
This did not look like a "crash".
Mostly it looked like someone just stopped the CF service but I need to make sure there is no other reason.

Similar Messages

ColdFusion 11 Scheduled Task & IIS 7.5

I have a scheduled task registered in ColdFusion 11 Admin console. ColdFusion 11 is hosted over IIS 7.5. The schedule task is to run 1 perticular file from sub application of the main app. After upgrading application from ColdFusion 9 to ColdFusion 11, scheduled task stopped working.
Note that, on IIS, main App has "Anonymous Authentication - Disabled" and "Windows Authentication - Enabled" ...
While for sub app (which is being called by scheduled task) has "Anonymous Authentication - Enabled" and "Windows Authentication - Disabled".
Moreover, when I try to run the scheduled task manually, it shows "Authentication falure" error in log file as
HTTP Error 401.2 - Unauthorized You are not authorized to view this page due to invalid authentication headers.
Any help would be greatly appriciated.
Thank you.

I've been fighting the identical problem since upgrading from CF8 on Windows Server 2008R2 with SSL enabled. The main CF application's folder is set for Windows Authentication This is happening on two different test servers- one running CF10 and the other running CF11, both of which had been running CF8 tasks with no problems. IIS settings for the subfolder with the scheduled task have only Anonymous authentication enabled (which is set to use the Application Pool identity that the Application Pool's identity is set to). I've set the file system permissions to allow Everybody, as well as IUSR, on the .CFM in question, and have tried using both HTTP and HTTPS forms of the URL in the scheduled task settings.
I can use the same HTTP/HTTPS URL in a browser directly (without authenticating to the server's application first) and the .CFM runs flawlessly. The CF http.log file shows Status Code=401, and saving the scheduled task output shows "IIS 7.0 Detailed Error - 401.2 - Unauthorized". What has changed in CF10 and CF11 if the underlying IIS server settings that worked before haven't changed?
Thanks,
Myron

Does ColdFusion 11 go into sleep mode after a period of non-use?

I've just installed CF11 on my cloud server (running Windows Server 2008 R2) for a shopping cart app using SQL Express Edition in the backend. After periods of inactivity, especially every morning, when I go into my app, it clocks for about a minute then errors out. Eventually, after another try, I'm able to run my app but it's sluggish for another couple clicks then it's back to normal.
I've been running this app on an older version of CF for almost a decade (I just upgraded to CF11 last month) and this problem never happened during that time. Can you provide any guidance on how I can fix this problem?

Unfortunately, you really only answered the first question: Rackspace. I would double check with them to make sure your virtual server itself isn't going into a sleep mode during off-hours.
For question 2, you will need to log into CF Administrator and note the Application and Session timeout settings, and let us know. Also, you need to examine your Application.cfm or Application.cfc and see if server-wide timeouts are being overridden (look for ApplicationTimeout and SessionTimeout).
For question 3: you said in your initial post "After periods of inactivity, especially every morning". This implies there are periods where NO users are using the app, and is quite likely when your timeouts are occurring. If the application times out in ColdFusion, the application is stopped and the first request after it is stopped will restart it. Depending on what you have in your Application.cfm/.cfc, this could either be a very quick process or a very lengthy one.
Another possibility is the database. Depending on the level of activity and if you have any scheduled database tasks running (like database maintenance/index rebuilding or SSIS packages running), the database itself could be the issue. SQL Server Express is throttled to only use one CPU core, 1 GB of memory, and has a size limit on databases (the limit varies depending on which release of SQL Server you are using).
-Carl V.

Unable to consume web service

I'm trying to consume a web service through ColdFusion, but I
get stopped by a Java compilation error. Here's the cfm:
<cfinvoke
webservice="
http://www.xmethods.net/sd/2001/TemperatureService.wsdl"
method="getTemp"
returnvariable="aTemp">
<cfinvokeargument name="zipcode" value="55987"/>
</cfinvoke>
<cfoutput>The temperature at zip code 55987 is
#aTemp#</cfoutput>
And here's the error message I see when I run the page:
coldfusion.jsp.CompilationFailedException: Errors reported by
Java compiler:
Found 2 system errors:
*** Error: Could not find package "java/util" in:
C:/Program Files/Java/jre1.5.0_11/lib/ext/dnsns.jar
C:/Program
Files/Java/jre1.5.0_11/lib/ext/sunjce_provider.jar
C:/Program Files/Java/jre1.5.0_11/lib/ext/sunpkcs11.jar
F:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\classes
F:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\lib\cfmx_bootstrap.jar
F:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\lib\cfx.jar
F:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\lib\commons-beanutils.jar
F:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\lib\commons-collections.jar
F:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\lib\commons-dbutils-1.0.jar
F:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\lib\jaxen-1.1-beta-2.jar
F:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-I....
at
coldfusion.jsp.JavaCompiler.compileClass(JavaCompiler.java:136)
at
coldfusion.xml.rpc.XmlRpcServiceImpl$2.run(XmlRpcServiceImpl.java:260)
at java.security.AccessController.doPrivileged(Native
Method)
at
coldfusion.xml.rpc.XmlRpcServiceImpl.registerWebService(XmlRpcServiceImpl.java:236)
at
coldfusion.xml.rpc.XmlRpcServiceImpl.getWebService(XmlRpcServiceImpl.java:475)
at
coldfusion.xml.rpc.XmlRpcServiceImpl.getWebServiceProxy(XmlRpcServiceImpl.java:430)
at
coldfusion.tagext.lang.InvokeTag.doEndTag(InvokeTag.java:381)
at
cfsymplicityTest2ecfm1539161069.runPage(G:\sys\goat\cf\dev\stomcava\symplicityTest.cfm:5)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at
coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
at coldfusion.CfmServlet.service(CfmServlet.java:107)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at
com.intergral.fusionreactor.filter.FusionReactorFilter.B(Unknown
Source)
at
com.intergral.fusionreactor.filter.FusionReactorFilter.A(Unknown
Source)
at
com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(Unknown
Source)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:259)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
This is the first time I'm trying to consume a web service
through ColdFusion. Any ideas what the problem that iscausing the
error and how to fix it?

stomcavage01 wrote:
> C:/Program Files/Java/jre1.5.0_11/lib/ext/dnsns.jar
well for starters, cf doesn't run 100% on 1.5.

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

ColdFusion randomly stops rendering

So, this is an issue we've been dealing with indefinitely. CF10 on a Win2008 environment just stops working. I remote into the server, the ColdFusion services are using 0% CPU, usually eating about 600-850MB of memory, and no pages are being delivered. Simply a white page. Browser (Chrome 30) times out eventually reporting an 'ERR_UNEXPECTED' error.
Restarting World Wide Web Service has no effect. Restarting IIS sites/server (nodes) has no effect. ONLY restarting the ColdFusion Application Server service results in services getting restored. And it takes normal amount of time to STOP the service, but starting it up takes a long time (though it eventually starts, and ColdFusion is rendered again)
I don't have troubleshooting skills necessary to know what log files to watch or a background in networking know-how, but I'd really love to start taking steps to finding out what the heck is doing this. So if you guys can suggest any steps, I'll gladly take them. The last time this happened for us was around 10:00AM-10:30AM on January 9, 2014 EST.

Hi
Test the below steps during development
Go to C:\ColdFusion10\cfusion\runtime\conf and take a back up of server.xml. Open server.xml and enable the built in port : 8500 like this

<Connector executor="tomcatThreadPool" maxThreads="50"
port="8500" protocol="org.apache.coyote.http11.Http11Protocol"
connectionTimeout="20000"
redirectPort="8445" />

Restart CF 10 service and then place few test cfm files in CF 10 root (C:\ColdFusion10\cfusion\wwwroot)
Open URL : http://localhost:8500/a.cfm and observe that CF is rendering the pages or not. If yes, then CF 10 is working fine.
Now you need to test when a request is coming to webserver, is your webserver forwarding the request to CF 10 or not. You can create a new test website in your webserver and configure that website with CF 10. Place few .cfm files and then observe the behavior. While you launch the webserver connector tool to add this test website, click on Advanced and check "Enable Verbose logging for connector"
NOTE: Enabling verbose is not all recommended in production environment.
This way you will be able to capture logs and troubleshoot accordingly. You can also check the Failed Request Tracing logs of IIS to find the root cause of this issue.
If you still encounter the issue, you can share the stack trace here.
Also, if this is a dev environment and you think that you have messed up some settings without backup then go ahead and give a shot to reinstall CF 10
HTH
Thanks
VJ

ColdFusion Developer stop functioning!

Hello all,
Yesterday, I installed ColdFusion Developer Edition and it
was working fine for about a hour. Then, suddenly it completely
stopped working. I know the code is correct because I uploaded my
document to a remote server with ColdFusion support and everything
worked correctly.
All I'm doing is simply defining a variable with
<cfset> and calling it with <cfoutput>, and for
whatever reason the ColdFusion server is now it seems like the code
is never even getting to the ColdFusion server because when I look
at the "view > source" in internet explorer, the <cf> tags
appear for the client to see.
What might have caused ColdFusion to stop functioning all of
a sudden? How can I get it working again? I have already tried
uninstalling, and reinstalling, and installing the MX 7.2 update,
and it still isn't working. Is there some way to reset everything
within ColdFusion? I'm basically at a loss here, any help would be
greatly appreciated.
Thank you,
Brian

whooopsies! I figured out what I was doing wrong. Noob
mistake -- rather than browsing to my files using
http://localhost:portnumber/directory
.... I was trying to just right click on my .cfm files on my hard
drive and open them in my browser....
C:\CFusionMX7\wwwroot\examples\variables_form.cfm -- in which case,
obviously the browser didn't know to route the files to the port of
the ColdFusion server, and thus wasn't compiling the code...

Flash Forms Stopped Working In ColdFusion 9

We moved our websites, many of which use Flash Forms, from a server running ColdFusion 7 to a server running ColdFusion 9.
At first all the Flash Forms in the various websites worked fine.
However, on the same day all the Flash Forms stopped working on the ColdFusion 9 server. No changes were made to the websites, to IIS 6, or to ColdFusion. We've restarted ColdFusion, IIS 6, and the server.
The error we get when loading a page that includes a Flash Form is:
412 Unknown
Here is the output reported by FireBug when loading a page (for example http://www.futurefamilydocs.org/test/testflashforms/index.cfm) that includes a Flash Form
The same page with the same flash form works fine in our ColdFusion 7 server (for example see: http://test.futurefamilydocs.org/test/testflashforms/index.cfm)
We cannot figure out what the issue is. Both servers are setup exactly the same Windows 2003, IIS 6, same ColdFusion settings, same access rights for internet users.
We'd appreciate any help as it will be significant work for use to change all the Flash Forms to normal forms. We're a small non-profit company and this is having a big impact on our members until we get it fixed or replace all the Flash Forms.
Thank You
Bruce Phillips

We have found the error message coldfusion is generating when we try to access a page that has a flash form:
C:\ColdFusion9\runtime\logs\coldfusion-event.log
03/29 13:02:45 user CFSwfServlet: Error: The class 'mx.rpc.RemoteClassRelayResponder' could not be loaded.
03/29 13:02:45 user CFSwfServlet: at C:\Inetpub\wwwroot\futurefamilydocs\test\testflashforms\inde.mxml:393
I researched that error and found suggestions to redo the IIS configuration for ColdFusion. I did that but still get the same error.

ColdFusion stops rendering pages - need help troubleshooting

We have a ColdFusion 10 Standard server out in production on an IIS 7.5 Windows 2008 R2 Datacenter virtualized environment. Randomly throughout the week, requesting our page will result in a blank white page (viewing source shows absolutely nothing).
I remoted into our server and noted that coldfusion.exe was taking up 730MB. I don't track these things so I don't know if that's a lot or not. And usually restarting the service takes 15-20 seconds. This time it took 20 seconds to stop the service and about 30 to start it.
I am not familiar with which logs to check in order to provide some useful information, but if anyone has an idea of where to send me looking, it would be greatly appreciated.

OK, here's some of the coldfusion-out.log file around the time we discovered CF was rendering white pages: I bolded areas of interest.
Oct 15, 2013 12:31:25 PM Error [ajp-bio-8012-exec-134] - File not found: [path]/ajax.cfm The specific sequence of files included or processed is: \\[path]\ajax.cfm''
Oct 15, 2013 12:31:25 PM Error [ajp-bio-8012-exec-121] - File not found: [path]/ajax.cfm The specific sequence of files included or processed is: \\[path]\ajax.cfm''
Oct 15, 2013 13:08:10 PM Information [scheduler-0] - Run Client Storage Purge
Oct 15, 2013 14:15:10 PM Information [scheduler-1] - Run Client Storage Purge
Oct 15, 2013 15:00:00 PM Information [DefaultQuartzScheduler_Worker-2] - Task default.Public FTP Purger triggered.
Oct 15, 2013 15:00:00 PM Information [DefaultQuartzScheduler_Worker-2] - Starting HTTP request {URL='http://[server-name]:80/[path]/index.cfm', method='get'}
<GroupWise WebAccess> WebAccess Servlet is shutting down
Oct 15, 2013 15:00:27 PM Information [pool-2-thread-2] - ColdFusion stopped
10/15 15:00:54 INFO License Service: Flex 1.5 CF Edition enabled
10/15 15:00:54 INFO Starting Flex 1.5 CF Edition
Oct 15, 2013 15:00:55 PM Information [pool-2-thread-1] - Starting logging...
Oct 15, 2013 15:00:55 PM Information [pool-2-thread-1] - Starting license...
Oct 15, 2013 15:00:57 PM Information [pool-2-thread-1] - Standard Edition enabled
Oct 15, 2013 15:00:57 PM Information [pool-2-thread-1] - Starting crypto...
Oct 15, 2013 15:00:57 PM Information [pool-2-thread-1] - Starting security...
Oct 15, 2013 15:00:58 PM Information [pool-2-thread-1] - Starting scheduler...
Oct 15, 2013 15:00:58 PM Information [pool-2-thread-1] - Starting WatchService...
Oct 15, 2013 15:00:58 PM Information [pool-2-thread-1] - Starting debugging...
Oct 15, 2013 15:00:58 PM Information [pool-2-thread-1] - Starting sql...
Oct 15, 2013 15:00:59 PM Information [pool-2-thread-1] - Pool Manager Started
Oct 15, 2013 15:00:59 PM Information [pool-2-thread-1] - Starting mail...
Oct 15, 2013 15:00:59 PM Information [pool-2-thread-1] - Starting runtime...
Oct 15, 2013 15:01:01 PM Information [pool-2-thread-1] - CORBA Configuration not enabled
Oct 15, 2013 15:01:01 PM Information [pool-2-thread-1] - Starting cron...
Oct 15, 2013 15:01:02 PM Information [pool-2-thread-1] - Starting registry...
Oct 15, 2013 15:01:02 PM Information [DefaultQuartzScheduler_QuartzSchedulerThread] - Task default.Public FTP Purger misfired.
Oct 15, 2013 15:01:02 PM Information [pool-2-thread-1] - Starting client...
Oct 15, 2013 15:01:02 PM Information [pool-2-thread-1] - Starting xmlrpc...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting jaxrs...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting graphing...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting solr...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting archive...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting document...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting eventgateway...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Event Gateway Disabled.
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting FlexAssembler...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting .NET...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting Monitoring...
Oct 15, 2013 15:01:03 PM Information [pool-2-thread-1] - Starting WebSocket...
Oct 15, 2013 15:01:04 PM Information [Thread-6] - Same Serial Number found on another ColdFusion server.The server may be out of compliance.
Oct 15, 2013 15:01:06 PM Information [pool-2-thread-1] - WebSocket server listens on port: 8575
Oct 15, 2013 15:01:06 PM Information [pool-2-thread-1] - ColdFusion started
Oct 15, 2013 15:01:06 PM Information [pool-2-thread-1] - ColdFusion: application services are now available
10/15 15:01:06 INFO Macromedia Flex Build: 87315.134646
Novell GroupWise WebAccess
Version 8.0.2
(C) Copyright 1993-2010 Novell, Inc. All rights reserved.
<GroupWise WebAccess> WebAccess Servlet is ready for work
Oct 15, 2013 15:02:41 PM Error [ajp-bio-8012-exec-3] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:42 PM Error [ajp-bio-8012-exec-26] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:42 PM Error [ajp-bio-8012-exec-6] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:42 PM Error [ajp-bio-8012-exec-38] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:42 PM Error [ajp-bio-8012-exec-30] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:42 PM Error [ajp-bio-8012-exec-39] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:42 PM Error [ajp-bio-8012-exec-2] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:42 PM Error [ajp-bio-8012-exec-11] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is:[path]\index.cfm, line: 409
Oct 15, 2013 15:02:41 PM Error [ajp-bio-8012-exec-13] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:43 PM Error [ajp-bio-8012-exec-18] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:43 PM Error [ajp-bio-8012-exec-28] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:02:43 PM Error [ajp-bio-8012-exec-25] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: [path]\index.cfm, line: 409
Oct 15, 2013 15:13:33 PM Information [ajp-bio-8012-exec-66] - Session rotated successfully.
Oct 15, 2013 15:13:33 PM Information [ajp-bio-8012-exec-66] - User admin logged in.
Oct 15, 2013 15:13:36 PM Information [ajp-bio-8012-exec-66] - Starting HTTP request {URL='http://www.adobe.com:80/go/coldfusion-updates', method='get'}
Oct 15, 2013 15:13:37 PM Information [ajp-bio-8012-exec-66] - HTTP request completed {Status Code=200 ,Time taken=854 ms}
Oct 15, 2013 15:15:56 PM Information [ajp-bio-8012-exec-66] - Session rotated successfully.
Oct 15, 2013 15:15:56 PM Information [ajp-bio-8012-exec-66] - User admin logged in.
We have Groupwise WebAccess on this server (Novell's web-based email web application). It seemed to terminate around 3PM, and CF followed shortly thereafter. Not sure why a task "misfired". As for the dual-license keys, our key was registered for 2 servers (our public web server, which is this log file, and our private intranet server). So I think that's just a false positive.

Coldfusion service stops responding

We have a BIG problem on our Coldfusion production server.
Today is stopped responding on requests. It has been more and
more frequent lately.
Server info:
ColdFusion MX
Version: 7,0,1,116466
Edition: Standard
Operating System: Windows 2003
Java Version: 1.4.2_05
Usually we can’t find anything in the log files but
today we did get this:
Component Prog ID: 3[ODBC][Env 2fc1978]
Method Name: IDispenserDriver::CreateResource
Process Name: w3wp.exe
Exception: C0000005
Address: 0x7C8224B2
Call Stack:
+ 0x7c8224b2
+ 0x40280006
Faulting application w3wp.exe, version 6.0.3790.1830,
faulting module ntdll.dll, version 5.2.3790.1830, fault address
0x000224b2.
Any idea’s? Any one that would know how to
debug/monitor this?
Morten

That sounds like a problem with IIS, rather than ColdFusion.
In which log did you find this error - in the system event log?
One thing that might help, install the IIS Diagnostics
Toolkit (iisdiag):
http://www.microsoft.com/downloads/details.aspx?familyid=9BFA49BC-376B-4A54-95AA-73C915670 6E7&displaylang=en
You can use the debugger to capture detailed crash dumps and
run analysis reports that can usually point you to the source of
the problem.
Another thought, I've heard of people running into issues
with Windows 2003 server where the OS itself is at Service Pack 1
(or 2), and IIS was installed from an older binary (e.g...the
original Windows 2003 installation CD). That can sometimes create
strange IIS issues, as described here:
http://www.coldfusionusers.com/blog/index.php/2006/05/18/recent-troubles-with-iis-60-coldf usion-mx7/
Best of luck with it.

Coldfusion services stop working when windows 2000 hotfix patches are installed on the windows 2000 operating system

The following windows 2000 hotfix patches were installed on
windows 2000 operating system -
KB917537
KB917159
KB914388
Coldfusion service stopped working and wouldn't restart
later...When I uninstalled the patches. I got back coldfusion. Do I
have to make changes in the settings of coldfusion administrator
for having hotfix patches?

Princess MX wrote:
> Please see the attached in response.
All of these are old and show CF working just fine. Do you
have any
errors from the time CF stopped working? Is there anything in
the event
viewer? When you say "stop working", do you mean fails to
start, throws
errors, silently fails? How have you configured CF?
Multiserver? Single
server? Does CF still work through the built-in webserver?
Can you start
CF from the command line jrun?
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

Coldfusion Builder 2 internal browser stopped working

CFB2's internal bowser function have stopped working. I can execute to an external browser. This all worked correctly last Friday, but this morning all I get is a blank window. I'm using Firefox and IE. The tabs are there as before, but when I click on them the window is blank (nothing happens). I've seen this problem discussed in other places but I've never seen a solution or reason. My version of CFB2 did just convert from standard to express today, but based on the CFB2 documentation that should not have caused this problem (unless I missed something).
I am evaluating CF9 and CFB2 as a potential platform for our organization. Based on what I have read about Adobe in other forums their support is somewhat lacking. I've also discovered several other problems/issues with missplaced .js files and certain feature randomly working/not working.
Any advise/explanation would be greatly appreciated.

I'm in exactly the ame situation. I have posted in all the CF blogs I could find and nobody has been able to provide an answer or explanation yet. Ended up filing a bug report at https://bugbase.adobe.com/ but haven't heard back from the Adobe folks.
I've been struggling for more than a year with CF9, and currently 10 on CF-Builder 2.1, and I agree, Adobe support is definetely lacking.

Stop a coldfusion request

This is what I'm looking for.. example:
2 users log in.. both pull reports... User 2 pulls the report
and waits, but user 1 gets impatient and closes the browser halfway
through the request being completed. I'm guessing I will have to
use sessions here, but how do I kill or abort user 1's request
using CF?

187_2007 wrote:
> This is what I'm looking for.. example:
>
> 2 users log in.. both pull reports... User 2 pulls the
report and waits, but
> user 1 gets impatient and closes the browser halfway
through the request being
> completed. I'm guessing I will have to use sessions
here, but how do I kill or
> abort user 1's request using CF?
>
You don't at least not easily. The browser does not inform
the server
that it has been closed. Part of that 'stateless' nature of
the HTTP
protocol.
You could theoretically use JavaScript to send a request to
inform the
sever the page has been closed possible using AJAX to keep it
behind the
scenes. But this is not very reliable.

Too many open socket connections causing ColdFusion to crash?

I’m currently working on an e-commerce site which sends and receives information to/from the client’s order management system via XML over a TCP/IP socket. It uses a very old java-based custom tag called CFX_JSOCKET (which appears to have been written in 2002) to open the socket, send the data, and get the response. The code that calls the custom tag and sends/receives data from the OMS pre-dates my working on the site, but its always worked, so I haven’t paid it much attention.
Back in the summer of 2009 we started experiencing issues with ColdFusion (v.7 on Window 2003 at the time) locking up on a more and more frequent basis, until it ultimately became a daily issue. After extensive research we narrowed the issue down to the communication between the web server and our client’s order management server. It seemed the issue with ColdFusion hanging was either related to there being too many connections open, or to these connections hanging and resulting in dead threads. This an educated guess based on a blog post I’d seen online, not actual monitoring of either CF or the TCP/IP connections. As soon as we dialed back the timeout on the CFX_JSOCKET tag from 20 seconds to 10, the issue disappeared, so we left it at that and moved on.
Fast forward to this January. The site is hosted at a new location, on a 64-bit Windows 2008 box running ColdFusion 9. Over the years traffic on the site has continued to grow. The nature of the clients business means that August and January are their business times of the year (back to school for college kids) and in January ColdFusion once again started locking up on an almost-daily basis.
One significant difference is that the address cleansing software that previously ran on the box and was used to verify shipping addresses is not available for 64-bit, so when we moved to the new server last summer, that task was moved to the client’s order management software and handled via XML like all other interaction with that system. However, while most XML calls to that server (order input, inventory check, etc) take under a second to complete, the address cleansing call regularly takes over 5 seconds to return data, and frequently times out.
Once we eliminated the address cleansing call from the checkout process, ColdFusion once again stopped locking up regularly. So it appears that once again it’s the communication between the web server and the order management server that’s causing problems. We currently have that address cleansing call disabled on the web site in order to keep ColdFusion from crashing, but that’s not a long term solution.
We don’t have, nor can I find online, the source code for the CFX_JSOCKET custom tag, so I decided I’d write some CF code utilizing the java methods to open the socket, send the data, get the response, and close the connection. My test code is working fine (under no load). However, in trying to troubleshoot an issue I had with it, I started monitoring the TCP/IP connections using TCPView. And I noticed that all the connections to the order management server, whether opened via the custom tag or my new code, remain open in either a TIME_WAIT or FIN_WAIT2 status for well over 2 minutes, even though I know for a fact that my new code is definitely closing the connection from the web server side.
They do all close eventually, but I’m wondering 1. Why they’re remaining open that long; 2. Is that normal; and 3. If all these connections remaining open could be what’s causing ColdFusion to choke.
Does this sound plausible? If so, does anyone have any suggestions/recommendations about how to fix it? My research seems to indicate this might be a matter of the order management system not closing the connection on its end, but I’m in way over my head, and before I go to client and tell them it’s their OMS causing the issue, I need to feel a little more confident that I’m on the right track.
Any help or advice would be very greatly appreciated. And thanks for taking the time to read through my long-winded explanation of the problem.
Set-up details:
ColdFusion Version: 9,0,0,251028 Standard
Operating System: Windows Server 2008
Java Version: 1.6.0_14
Java VM Name: Java HotSpot(TM) 64-Bit Server VM
Java VM Version: 14.0-b16
Thanks,
Laurie

Hi Laurie,
Not aware of custom tag called CFX_JSOCKET. I guess the process you described very well is consuming a resource then you are getting a problem. Trick is what parameter to adjust. Perhaps you are running out of one the threads in CFadmin > Server Settings > Request Tuning.
I expect if you enable CF Metrics logging where you can log the threads and other resources then you can find out which parameter needs adjusting. Let me know if you want some details on enabling CF Metrics. Perhaps others will have much better idea than me and help without the overhead of logging.
The other interesting thing is you are using CF9.0.0. Do you have some reasons for not being on updater1 CF9.0.1?
HTH, Carl.
PS I posted before however seems to have gone, just hope does not come back and then I have posted twice.

Problem setting up ColdFusion on Windows 7 and IIS

Using Windows 7 version 6.1 Build 7601 Service Pack 1 on a Dell N5110 Laptop running an Intel Core i5-2430M CPU @ 2.4 GHz and 6 GB RAM, 64-bit OS.
Under Control Panel > Programs > Turn Windows Features On and Off > Internet Information Services I have turned on all the features and subfeatures EXCEPT for FTP Server. Internet Information Services Hostable Web Core is also turned ON though it's unclear whether it's necessary or not.
Installed ColdFusion version 10 after enabling IIS as described above.
Used instructions at http://learn.iis.net/page.aspx/266/troubleshooting-failed-requests-using-tracing-in-iis/ to set up and test tracing, working around all the ambiguities and errors there until tracing actually worked as described for a 404.2 error on a .asp file. THEN reset the trace to work on all 500 errors for ISAPI Extension and WWW Server.
Ran the Web Server Configuration Tool for ColdFusion as described at http://help.adobe.com/en_US/ColdFusion/10.0/Installing/WSc3ff6d0ea77859461172e0811cdec18a1 5-7ffb.html to configure IIS for ColdFusion in Windows. Then these parts of the configuration were possible to verify at C:\ColdFusion10\config\wsconfig :
Verify your IIS configuration
Verify that the following folder was created: cf_root/config/wsconfig/number.
To set the <samp class="codeph">connectionpooltimeout</samp> and <samp class="codeph">reuseconnectioncount</samp> click on Advanced Setting tab. The option to enable buffering and verbose debugging is available on the same page.
Configuring IIS:
Creates a folder <samp class="codeph">1</samp> in <samp class="codeph">cfroot\config\wsconfig</samp>, that contains all connector-related files.
Creates a virtual directory <samp class="codeph">Jakarta</samp> in <samp class="codeph">cfroot\config\wsconfig</samp> (in IIS).
Adds an entry, <samp class="codeph">tomcat</samp>, under the<samp class="codeph"> ISAPI FILTERS</samp>. This points to <samp class="codeph">cfroot\config\wsconfig\1\isapi_redirect.dll</samp>.
Some of the parts of the verification process were skipped, for the reasons described :
Adds an entry, <samp class="codeph">tomcat</samp>, to <samp class="codeph">cfroot\config\wsconfig\1\isapi_redirect.dll</samp> with permission <samp class="codeph">allowed</samp> under ISAPI and CGI Restrictions. It is applicable for global sites in IIS manager.
No kind of 'entry' is possible for the specified .dll at that location under its Properties, nor can permissions be allowed under Properties for anything remotely resembling 'ISAPI and CGI Restrictions'. There is nothing resembling "Global Sites" in IIS manager either where this information might be found.
Adds the following <samp class="codeph">isapi</samp> handlers: <samp class="codeph">cfcHandler</samp>, <samp class="codeph">cfmHandler</samp>, <samp class="codeph">cfmlHandler</samp>, <samp class="codeph">cfrHandler</samp>, and <samp class="codeph">cfswfHandler</samp>.
The logical place for these "handlers" would be in IIS but there is no description provided for where they might be found and searching around provides no clues so this is impossible to verify as well.
For debugging issues, set the log level to <samp class="codeph">debug</samp>, in the <samp class="codeph">isapi_redirect.properties</samp> file present in the <samp class="codeph">cfroot\config\wsconfig\1\ </samp>directory.
This was done and these are the contents of that file:
extension_uri= /jakarta/isapi_redirect.dll
log_file= C:\ColdFusion10\config\wsconfig\1\isapi_redirect.log
log_level= debug
worker_file= C:\ColdFusion10\config\wsconfig\1\workers.properties
worker_mount_file= C:\ColdFusion10\config\wsconfig\1\uriworkermap.properties
iis_buffer_enable= true
To disable webserver buffer, change the <samp class="codeph">is_buffer_enable</samp> to <samp class="codeph">false</samp> in the <samp class="codeph">cfroot\config\wsconfig\1\isapi_redirect.properties</samp> file. Disable webserver buffer if you want <samp class="codeph">cfflush</samp> to work over an IIS connector. If your application does not use <samp class="codeph">cfflush</samp>, set it to <samp class="codeph">true</samp> for increase in the performance.
This was left on 'true' as shown in the file contents above.
THIS IS THE ERROR NOW OBTAINED at http://127.0.0.1/CFIDE/administrator/index.cfm:
Server Error in Application "DEFAULT WEB SITE"
Internet Information Services 7.5
<fieldset><legend>Error Summary</legend>
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
</fieldset>
<fieldset><legend>Detailed Error Information</legend>
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
cfmHandler
Error Code
0x800700c1
Requested URL
http://127.0.0.1:80/CFIDE/administrator/index.cfm
Physical Path
C:\ColdFusion10\cfusion\wwwroot\CFIDE\administrator\index.cfm
Logon Method
Anonymous
Logon User
Anonymous
Failed Request Tracing Log Directory
C:\inetpub\logs\FailedReqLogFiles
</fieldset>
The supplied path C:\inetpub\logs\FailedReqLogFiles is a nonresponsive link but there are .xml files created in that subdirectory such as C:\inetpub\logs\FailedReqLogFiles\W3SVC1\fr000015.xml which contains this information:
Request Diagnostics for http://127.0.0.1:80/CFIDE/administrator/index.cfm
STATUS_CODE 500, 46 ms, GET (2012-8-16, 16:59:5:778)
Request
Summary
Request
Details
Compact
View
Complete
Request Trace
Filter
Notifications
Module
Notifications
Performance
View
Authentication
Authorization
ASP.Net
Page Traces
Custom
Module Traces
FastCGI
Module
<fieldset>
<legend>-Request Summary</legend>
Site
1
Process
8472
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
46 msec
Url
http://127.0.0.1:80/CFIDE/administrator/index.cfm
App Pool
DefaultAppPool
Authentication
anonymous
User from token
NT AUTHORITY\IUSR
Activity ID
{00000000-0000-0000-6F00-0080000000FB}
</fieldset>
No.
EventName
Details
Time
1.
i
GENERAL_REQUEST_START
SiteId="1", AppPoolId="DefaultAppPool", ConnId="1610612845", RawConnId="0", RequestURL="http://127.0.0.1:80/CFIDE/administrator/index.cfm", RequestVerb="GET"
16:59:05.778
2.
GENERAL_SET_REQUEST_HEADER
HeaderName="AspFilterSessionId", HeaderValue="", Replace="true"
16:59:05.778
3.
i
GENERAL_ENDPOINT_INFORMATION
RemoteAddress="127.0.0.1", RemotePort="50289", LocalAddress="127.0.0.1", LocalPort="80"
16:59:05.778
4.
i
GENERAL_REQUEST_HEADERS
Headers="Cache-Control: max-age=0 Connection: keep-alive Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip, deflate Accept-Language: en-us,en;q=0.5 Host: 127.0.0.1 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:13.0) Gecko/20100101 Firefox/13.0.1 DNT: 1 "
16:59:05.778
5.
i
GENERAL_GET_URL_METADATA
PhysicalPath="", AccessPerms="517"
16:59:05.778
6.
i
HANDLER_CHANGED
OldHandlerName="", NewHandlerName="cfmHandler", NewHandlerModules="IsapiModule", NewHandlerScriptProcessor="C:\ColdFusion10\config\wsconfig\1\isapi_redirect.dll", NewHandlerType=""
16:59:05.778
7.
i
USER_SET
AuthType="", UserName="", SupportsIsInRole="true"
16:59:05.778
8.
i
GENERAL_SEND_CUSTOM_ERROR
HttpStatus="500", HttpSubStatus="0", FileNameOrURL="500.htm"
16:59:05.824
9.
i
GENERAL_FLUSH_RESPONSE_START
16:59:05.824
10.
i
GENERAL_RESPONSE_HEADERS
Headers="Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET "
16:59:05.824
11.
GENERAL_RESPONSE_ENTITY_BUFFER
Buffer="<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal Server Error</title> <style type="text/css">  </style> </head> <body> <div id="header"><h1>Server Error in Application "DEFAULT WEB SITE"</h1></div> <div id="server_version"><p>Internet Information Services 7.5</p></div> <div id="content"> <div class="content-container"> <fieldset><legend>Error Summary</legend> <h2>HTTP Error 500.0 - Internal Server Error</h2> <h3>The page cannot be displayed because an internal server error has occurred.</h3> </fieldset> </div> <div class="content-container"> <fieldset><legend>Detailed Error Information</legend> <div id="details-left"> <table border="0" cellpadding="0" cellspacing="0"> <tr class="alt"><th>Module</th><td>IsapiModule</td></tr> <tr><th>Notification</th><td>ExecuteRequestHandler</td></tr> <tr class="alt"><th>Handler</th><td>cfmHandler</td></tr> <tr><th>Error Code</th><td>0x800700c1</td></tr> </table> </div> <div id="details-right"> <table border="0" cellpadding="0" cellspacing="0"> <tr class="alt"><th>Requested URL</th><td>http://127.0.0.1:80/CFIDE/administrator/index.cfm</td></tr> <tr><th>Physical Path</th><td>C:\ColdFusion10\cfusion\wwwroot\CFIDE\administrator\index.cfm</td></tr> <tr class="alt"><th>Logon Method</th><td>Anonymous</td></tr> <tr><th>Logon User</th><td>Anonymous</td></tr> <tr class="alt"><th>Failed Request Tracing Log Directory</th><td><a href="file://C:\inetpub\logs\FailedReqLogFiles">C:\inetpub\logs\FailedReqLogFiles</a></td></tr> </table> <div class="clear"></div> </div> </fieldset> </div> <div class="content-container"> <fieldset><legend>Most likely causes:</legend> <ul> %09<li>IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.</li> %09<li>IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.</li> %09<li>IIS was not able to process configuration for the Web site or application.</li> %09<li>The authenticated user does not have permission to use this DLL.</li> %09<li>The request is mapped to a managed handler but the .NET Extensibility Feature is not installed.</li> </ul> </fieldset> </div> <div class="content-container"> <fieldset><legend>Things you can try:</legend> <ul> %09<li>Ensure that the NTFS permissions for the web.config file are correct and allow access to the Web server's machine account.</li> %09<li>Check the event logs to see if any additional information was logged.</li> %09<li>Verify the permissions for the DLL.</li> %09<li>Install the .NET Extensibility feature if the request is mapped to a managed handler.</li> %09<li>Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click <a href="http://go.microsoft.com/fwlink/?LinkID=66439">here</a>. </li> </ul> </fieldset> </div> <div class="content-container"> <fieldset><legend>Links and More Information</legend> This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error. <p><a href="http://go.microsoft.com/fwlink/?LinkID=62293&IIS70Error=500,0,0x800700c1,7601">View more information »</a></p> <p>Microsoft Knowledge Base Articles:</p> <ul><li>294807</li></ul> </fieldset> </div> </div> </body> </html> "
16:59:05.824
12.
i
GENERAL_FLUSH_RESPONSE_END
BytesSent="6414", ErrorCode="The operation completed successfully. (0x0)"
16:59:05.824
13.
i
GENERAL_REQUEST_END
BytesSent="6414", BytesReceived="348", HttpStatus="500", HttpSubStatus="0"
16:59:05.824
+Expand All <fieldset> <legend>Errors & Warnings</legend>
</fieldset>
There is nothing under Errors & Warnings. Dead Stop. Nothing Else To Do except Ask For Help. Hoping someone here can provide some guidance.
TIA

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

Coldfusion MX 6.0 Stopped

Similar Messages

Maybe you are looking for