Collecting and bundling messages from multiple interfaces using BPM

Hi friends,
I am currently working on bpmpatternmultilf(without condition).
In my source i have 3 messages having same message type.
Message type:
ID
Overall no
In the source i am placing 3 files like
message1.txt ID 100 Overall no 200
message2.txt ID 100 Overall no 300
message3.txt ID 100 Overall no 400.
I have used correlation element as ID.
But in the target file I am getting the result as ID 100 Overall no 200.
Overall no 300 and 400 are not present?
I understand that the messages are not getting collected and bundled?
Please help me out on this.
Thank you in advance

Hi, deepak:
To collect the message of same message interface, if you know that all the files will exist for a while,
and next bundle of file will come to the folder after a period of time saying 30 minutes.
You can have your receive step, followed by container operator to append individal messages to multi-line elements.You will need deadline block, put timeout to saying 10 minutes.
This to say that you collect all the messages in 10 minutes, and put them in multi-line elements, now you collected all the messages with different ID.
Next you need to design you multi-mapping, since your message is based on ID, you multi-mapping is m:n
Eventually, you will need transformation step to call the multi-mapping, map the multi-line elements to n target messages. Your final send step send n files to your target system.
Regards.
Liang

Similar Messages

Collecting and Bundling Messages - One Interface

Hi ,
I am trying this Collecting and Bundling Messages - One Interface my interface is File .
Followed all the steps in the SAP documentation under Examples and Usage cases.
But I get only one message from the inbound channel .
when I check the Mapping in the MONI . It shows 2 instances of interface in the MessageIn but the output message of the BPE moni shows only 1 message . Message that is in the first instance of the Mapping IN .
Is it error in the multi mapping ? can some body through some light on this ..
Regards,
KLK

Hi Behaves & Moor,
S, I am trying the pattren given by SAP . Following the weblink given by Mr.Moorty.
I made source and Target Msg type as 0.. Unbound and Multiline for Transformation step.
But when I test the mapping in the Design time by importing a XML with following structure (Please dont mind bad syntax)
<Messages >
   <ns0:Message1>
      <Filesender_MT >
         <Record>
            <Row>
               <ID>1</ID>
            </Row>
         </Record>
      </ns1:Filesender_MT>
   <Message1>
   <Message2>
    <Filesender_MT >
         <Record>
            <Row>
               <ID>2</ID>
             </Row>
         </Record>
      <Filesender_MT>
   <Message2>
</Messages>
I get only one message :
<Messages >
   <ns0:Message1>
      <Filesender_MT >
         <Record>
            <Row>
               <ID>1</ID>
            </Row>
         </Record>
      </ns1:Filesender_MT>
   <Message1>
<Messages>
which is wht i am getting from the inbound CC.
how do I test Multi Mapping ? and when I check the MONI->PE --> Technical Details --> Mapping --> MappingIN
It shows 1 entry but the nestted table shows both the file contents that I have put in the Sender Communication channel.
I am putting 2 files in the Sender CC and expecting these two file contents to Merge and give me 1 file as out put . this is the scenario understood from the SAP documentation please correct me if I am wrong .
Thanks and Regards
K.L.K

Collecting and bundling messages - transformation n- 1 messages problem

Hi guys,
I try to implement the scenario with collecting and bundling messages. I have a question: when you look at the samples in Basis6.40 SW Component, namespace http://sap.com/xi/XI/System/Patterns, there is an example, which uses message mapping BpmPatternCollectMerge.
My question is: how can this mapping work??? it is mapping of N messages into 1 of the same type!!
And when you try to test it, it does not work...
Can you help, how to solve it? Or any ideas for other possibilities, how to merge the messages?
Thanx, Peter

Hi,
To perform a N:1 transformation, these are the follwing important steps,
DESIGN
1. In your message mapping, make sure that the occurence of the source message interface is made to be n.
2. Likewise, in your Interface mapping, the occurence of the Source Message Interface should also be made N.
CONFIGURATION
If you are using SP14 or SP15, the mapping can be done without a BPM as follows,
u will have to go for a BPM with a receive step inside a loop with a multiline container element and the transformation step outside the loop to do the N:1 mapping
Hope this clarifies and helps,
Regards,
Bhavesh
Message was edited by: Bhavesh Kantilal

Bundling messages from two interfaces

Hi all,
I did finish create the BPM, fork with two receivers, transformation step and send step.
if anyone done this before can you please post the n:1 mapping for two source messages and one target message.
i was struggling for last 3 days.
Kind Regards,
Praveen.

i already did all these steps i did finish mapping also. when i test the mapping iam not getting two messages.
can you please tell me which nodes i must map to get the target structure. (take any sample structures).
source message
Messages
Message1
one_mt
details----1...unbounded
employee
Message2
two_mt
details-----1..unbounded
employee
target message
Messages
message1
target_mt
details-----1..unbounded
employee
Kind Regards,
Praveen
Edited by: Praveen Kumar on Dec 20, 2007 11:05 AM

Log messages from multiple instances in single file.

Hi!
I have a requirement that i need to log messages from muliple instances of the same object in a file. The new file will be created every day. Likewise, multiple objects might have various instances each.
One class
->multiple instances
-> log message stored in single file.
Note :
I am using the Message driven bean. I need to log from the bean class. JDK 1.3
If u could help me out that would be great.

As long as they are all from the same OS program (a single Java VM), that's OK - you can use Log4j, and use a rotating file logger.
If you point two different virtual machine processes at the same file, one may have it open when the other is trying to rotate it, and your rotation may fail (at best) and/or you may lose the old log (the worst case).
If you need to collect log messages from multiple processes (or even multiple machines), use a syslog-based logger (Log4j has a SyslogAppender) or use Log4j's SocketAppender to write to a log4j-builtin log listener (SocketNode).

How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

If you want to use JMS with AQ as datastore then there is some configuration you need to do to enable this. This is outside SOA Suite per sa, e.g. no adapter required.
If you want to connect to the AQ direct then use the AQ adapter.
this blog may be of some help understand the configuration
http://biemond.blogspot.com/2008/01/oracle-jms-with-esb-and-bpel.html
cheers
James

Thank you for your service. I was most disappointed to find, however, that the letters I really wanted (Adobe Garamond Alternate Caps) is not in this collection and indeed, one now has to use another fancy designing program to construct those letters. I

Thank you for your service.
I was most disappointed to find, however, that the letters I really wanted (Adobe Garamond Alternate Caps) is not in this collection and indeed, one now has to use another fancy designing program to construct those letters. I can’t afford to buy Photoshop just to construct two special capital letters. I’ve used the B and M in my logo for Balquhidder Music for years - but from jpgs - and I was hoping to have more flexibility in the future. I spent $169 to make sure I am in compliance. But I didn’t get anything of use to me.
I can’t understand why those Alternate Caps are not part of this - or any other package. I thought Adobe was capable of amazing things.
I assume I am whistling in the dark. So have a nice day.

Actually, when Adobe moved from Type 1 fonts to OpenType CFF fonts, all the so-called “expert typefaces” were consolidated into the base fonts. In other words Adobe Garamond Pro Regular not only has the Western Latin characters of the original Type 1 version of Adobe Garamond, but also has alternate Latin capitals (with titling, titling floating accents, and stylistic alternates), alternate Latin lowercase (swash and superiors), Latin small capitals (alphabetic and floating accents), ligatures, multiple numeric forms (including lining tabular, lining proportional, oldstyle tabular, oldstyle proportional, superscripts, scientific inferior, numerator, denominator forms, fractions, mathematical operators, etc.) plus a raft of other special symbols.
OpenType fonts are Unicode-based and allow for more than the 256 characters in Type 1 fonts which required multiple typefaces all with mappings to a standard keyboard to accommodate all these glyphs.
Thus, hopefully your disappointment will turn to joy.
To assist you in understanding OpenType fonts and to show you what is in the current Adobe Garamond fonts, I have attached a few PDF files for your perusal.
Let us know if you have any questions.
- Dov

How do you take off reseiving messages on multiple devices using the same apple account

How do you take off reseiving messages on multiple devices using the same apple account?

Go to Settings>Messages>Send and Receive on all but one device and add a unique email address on each device and delete the commone Apple ID email device
If there is also an iPhone with iOS 6 associated with the Apple ID, uncheck the phone number on all but the phone.

How can I send a message to multiple contacts using "groups".

How can I send a message to multiple contacts using "groups".
It was easy on my sony ericssonn....do i need to download an app?

There is no group send option like you are looking for.
To send to a group you have to pick each person you want to send to and send as a group that way. Then don't delete that SMS thread and you can reuse it again later.
As for an app, well SMS works via your carrier and the OS, not something an App can do unless the app send the data to them (a third party) and then they relay it to the carrier. Do you really want to be sending your SMS to some 3rd party first?

How to Recover Contacts and Text message from iPhone 6/6 Plus

I am asking for help to recover my iPhone Contacts and Text Message,my iPhone jailbreak failed by myself.lead to my iPhone data was lost,I want to get back my contacts and text message.it is very important for me to recover them.Whether have you any method to help me to regain my contacts and text message from my iPhone device.thank you
Best regards
SimileSky

selenafromshenzhen wrote:
If you have backed up your iPhone before the jailbreaking, then you can recover contacts and text messages by restoring your iPhone with the iTunes or iCloud backup file. Read the guides: iCloud: Restore or set up your iOS device from iCloud & Use iTunes to restore your iOS device to factory settings - Apple Support
i tried to update with new iOS, in between strucked my iphone, after that there is no data in my phone,
can you help me how can i retrive it, Also i dont have backup (itunes / icluod)
is there any possibilities to recover those my datas.
Any softwares are available ???
iPhone 6

Hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

There are multiple ways of doing this. Here are some of them..
The Web Publishing tool allows you to publish the front panel and you can control the front panel remotely.http://www.ni.com/white-paper/2911/en/
The TCP/IP socket can allow you to pass codes "strings" to another computer. Lookup the server client example.
regards,
Gautham

Can ipod touch 4th generation send and receive messages from a phone number?

I have an iphone number connected to imessage but my iphone broke. On my mac messages app it allows me to be reached at (my phone number). Is it possible on the ipod touch 4th generation to send and receive messages from my phone number as opposed to an email address?

Only if you have an iPhone using with iOS 6 or greater using the same APple ID for Settings>Messages>Send and Recevice.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage

Is there a way to send a message from my IPAD using a bluetooth keyboard?

Is there a way to send a message from my IPAD using a bluetooth keyboard? There must be a way, but for the life of me I can't seem to find the shortcut. I'm using Logitech 811 keyboard and have an IPAD 2.
Thank you,

Are you asking if there is a way to press "Send" from the BT keyboard as opposed to reaching over and tapping it on the screen? Not to the best of my knowledge.
Looking at the posts in the More Like the Box to the right, I did find this link. It's old and may not be valid or useful:
http://the.taoofmac.com/space/blog/2012/06/22/0023#command-tab-on-your-ipad
But it's a place to start.

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distress

If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

How do you transfer pictures,video's and text messages from iphone 4 to the new model

How do you transfer pictures,video's and text messages from iphone 4 to the new model?

http://support.apple.com/kb/ht2109

Collecting and bundling messages from multiple interfaces using BPM

Similar Messages

Maybe you are looking for