Bundling messages from two interfaces

Hi all,
I did finish create the BPM, fork with two receivers, transformation step and send step.
if anyone done this before can you please post the n:1 mapping for two source messages and one target message.
i was struggling for last 3 days.
Kind Regards,
Praveen.

i already did all these steps i did finish mapping also. when i test the mapping iam not getting two messages.
can you please tell me which nodes i must map to get the target structure. (take any sample structures).
source message
Messages
Message1
one_mt
details----1...unbounded
employee
Message2
two_mt
details-----1..unbounded
employee
target message
Messages
message1
target_mt
details-----1..unbounded
employee
Kind Regards,
Praveen
Edited by: Praveen Kumar on Dec 20, 2007 11:05 AM

Similar Messages

Collecting and bundling messages from multiple interfaces using BPM

Hi friends,
I am currently working on bpmpatternmultilf(without condition).
In my source i have 3 messages having same message type.
Message type:
ID
Overall no
In the source i am placing 3 files like
message1.txt ID 100 Overall no 200
message2.txt ID 100 Overall no 300
message3.txt ID 100 Overall no 400.
I have used correlation element as ID.
But in the target file I am getting the result as ID 100 Overall no 200.
Overall no 300 and 400 are not present?
I understand that the messages are not getting collected and bundled?
Please help me out on this.
Thank you in advance

Hi, deepak:
To collect the message of same message interface, if you know that all the files will exist for a while,
and next bundle of file will come to the folder after a period of time saying 30 minutes.
You can have your receive step, followed by container operator to append individal messages to multi-line elements.You will need deadline block, put timeout to saying 10 minutes.
This to say that you collect all the messages in 10 minutes, and put them in multi-line elements, now you collected all the messages with different ID.
Next you need to design you multi-mapping, since your message is based on ID, you multi-mapping is m:n
Eventually, you will need transformation step to call the multi-mapping, map the multi-line elements to n target messages. Your final send step send n files to your target system.
Regards.
Liang

Reading message from two queues and sort according the time stamp

Hi
I have a requirement where i have to read the message from two queue .. and sort according the Time stamp ( Field in payload ) and send it ot the Webservice ..
How i acheive using the BPM..
in the BPM i have to collect the message for every 20 sec ... and then sort it tout ...
S V

Do you mean from two sender? What do you exactly mean by "reading from two queues"?
Regards,
Prateek

Mail is not downloading messages from two accounts but the messages are in the server.

Hello, I'm having this problem. Mail is not downloading messages from two accounts. I don't know why but there're two accounts working so bad. If I click with the right button on the account and click to see the account details, I can see the messages on the server but not in inbox. I made a sync with this account and my iphone and then the iphone downlad the messages with out problems. Not my imac at work or my imac at home... what can be wrong?
Thanks.

For Gmail, this is normal, there is nothing you can do about it -- just type Mail AND Gmail in the search box to see threads discussing how Gmail works.
As for the other accounts, this shouldn't happen. I wonder if what you're seeing is just that Mail is ignoring this setting for mail that was already on the server when you started using it. I've seen something like this happen when playing with that setting, e.g. changing it from "After one day" to "After one week". Mail would just ignore messages that fell in the timeframe where the two settings could interfere and I didn't notice it until some time later, when Mail "forgot" those messages had already been downloaded and, being faced with them again, dutifully downloaded them as if they were all new.
I believe that, if you leave the setting however you wish and stop playing with it, then Mail shall correctly process any mail that arrives from now on. In order to manually delete old messages that Mail seems to be ignoring, you can invoke the Account Info window (this is probably what you meant when you said "I can delete messages individually"; if that's not the case and want more info on this, just ask).

755p treo...phone's email "gets" messages from two years ago...super old mail...how can I get my newer messages?

I've got a Treo 755p...and I'm happy with it, except email has never worked right. When I connect to my gmail account to "get" messages, all it downloads are 350 messages from the year 2008. I've got to keep downloading, and deleteing 350 messages at a time which are two years old. What can I do with the phone or at gmail to "get" the more recent mail. It seems there must be a way to eliminate these old messages and concentrate on newer messages.
Thanks for the help, I appreciate it and do enjoy the phone. I've got a wireless keyboard coming and that seems like an awesome accessory. Thanks again!!
Post relates to: Treo 755p (Sprint)

I feel your pain. I awoke this morning to check my text messages on my iPhone (I'm away working in Norway) only to notice a text my girlfriend sent over the night. The title bar over the message listed her Italian mobile number instead of her name. I thought that odd, only to realize that virtually all of my contacts have disappeared from the iCloud. Even more strange, there appears to be no order, rhyme nor reason, or any form of sense as to what has been deleted. If this (and a few other issues I have with post-Jobs Apple) is indicative of Apple's trajectory, they're not going to be around long. I'm beyond ******-off over this and I'll be thinking very hard about buying Apple products in the future.

Validating an XML message from Outbound Interface.

Hi All,
I hav an xml generated from an outbound interface and is to be validated against a BC Schema that hav been specifically created from the sample XML docs.I'm strucked at how to validate the XML in XI against the xsd file. Can anyone pls help me out in this regard.It's a bit urgent.

Hi Anil,
When you create a dataType by yourself, then XI generates the XSD.
Instead, you could create the dataType by importing a XSD. Two ways:
1. While creating a new dataType, Goto Tools->'Import XSD' and select your XSD file.
2. You can import your XSD as 'External Definitions'
In these 2 cases, the dataType will be as per your XSD. Then use this dataType for receiving the data into XI.
XI validates against that dataType XSD, which is your XSD.
Hope this helps!
regards,
Pops V

Mac mail automatically deletes messages from two weeks prior

I'm using Mac Mail on 10.6.8 - snow leopard. I use this program for my work emails and mail will automatically delete messages in my Inbox that are two weeks old. The email account is IMAP. I have looked in the "Account Preferences/ Advanced" and can not find a setting to correct this. What am I missing?

Are you sure it's Mail that's doing this? It could be on the other end (the server end).
Mac Mail has a preference for "Remove copy from server after retrieving a message", but there's no choice for 2 weeks, so I doubt that's it.

Importing/Merging two Mac Mail messages from two laptops

I have created 3 mbox files by archiving the messages on my laptop.
I would like to import them into my existing computer.
If I do this will it erase all the messages I currently have on my existing computer or will it merge them?

You're welcome.
Should the older computer be in Target mode, or just mounted via network?
As long as Mail can see the files to be imported, and you have read access permissions to them, it doesn't matter.
WIll this also work across user accounts on a single computer?
Probably not, because of permission issues. If you have administrator privileges, however, you can make a copy of the mailboxes to be imported, even if you don't have read access permissions to them. When copying files, the Finder makes the user that copies them the owner of the copy without altering ownership of the original files, which would allow you to import the copy afterwards.

My iMessage history will not load. I scroll up to load older iMessages and it takes me back to text messages from two years ago.

Has anyone else experienced this problem? Can anybody suggest steps to get my iMessage history working properly again.

Anyone? C'mom, I know some of you techie type folks know how to fix this!

Payload from Two diff Outbound interfaces and Business Service

Hi All:
I created a scenario....where messge is coming from two diff outbound message interface..and have only one inbound inteface...
Message_One is coming from one OA interface.
Message_Two is coming from other OA interface.
I am using only one Inbound interface...
Message Mapping
Source Message:
MessageOne
MessageTwo
Target Message:
Message.
Now for this I cretaed one IP
Fork (two receive steps..for message one and mesage two)
Transformation (Interface Mapping between (Message one, Message Two) and Message
Send.
Here is the source from the Test Tab of the IR tool.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns1:MT_Message_One xmlns:ns1="http://t-systems.com/XI/Demo/BPM">
 <CutomerName>Gillette</CutomerName>
 <CutomerID>AA123</CutomerID>
 <ProductName>PN</ProductName>
 <ProductID>1234</ProductID>
 </ns1:MT_Message_One>
 </ns0:Message1>
 <ns0:Message2>
 <ns1:MT_Message_Two xmlns:ns1="http://t-systems.com/XI/Demo/BPM">
 <ProductCost/>
 <ProductManufaturingDate/>
 <ProductExpDate/>
 <ProductID/>
 </ns1:MT_Message_Two>
 </ns0:Message2>
</ns0:Messages>
Now below information is coming from first File
 <CutomerName>Gillette</CutomerName>
 <CutomerID>AA123</CutomerID>
 <ProductName>PN</ProductName>
 <ProductID>1234</ProductID>
This infromation is coming from second file
 <ProductCost/>
 <ProductManufaturingDate/>
 <ProductExpDate/>
 <ProductID/>
Question how my input message looks for both??
I am using HTTP client to send the two diff message from two diff Business Service to same BPM.
Is it like
 <ns1:MT_Message_One xmlns:ns1="http://t-systems.com/XI/Demo/BPM">
 <CutomerName>Gillette</CutomerName>
 <CutomerID>AA123</CutomerID>
 <ProductName>PN</ProductName>
 <ProductID>1234</ProductID>
 </ns1:MT_Message_One>
 <ns1:MT_Message_Two xmlns:ns1="http://t-systems.com/XI/Demo/BPM">
 <ProductCost/>
 <ProductManufaturingDate/>
 <ProductExpDate/>
 <ProductID/>
 </ns1:MT_Message_Two>
 </ns0:Message2>
Thanks & Regards,
Farooq Farooqui

Yes now I achived it...
It like the same as I mentioned
<ns1:MT_Message_One xmlns:ns1="http://t-systems.com/XI/Demo/BPM">
<CutomerName>Gillette</CutomerName>
<CutomerID>AA123</CutomerID>
<ProductName>PN</ProductName>
<ProductID>1234</ProductID>
</ns1:MT_Message_One>
<ns1:MT_Message_Two xmlns:ns1="http://t-systems.com/XI/Demo/BPM">
<ProductCost/>
<ProductManufaturingDate/>
<ProductExpDate/>
<ProductID/>
</ns1:MT_Message_Two>
</ns0:Message2>

I sent some emails from one of my email accounts and now it shows that these emails have been simultaneously sent from two of my email accounts

I sent a few emails from one of my accounts that are set up in my Thunderbird. Now I see that they have been sent from two of my accounts, simultaneously. It shows them in both Sent folders and with the respective email address as sender.
Those email accounts have been set up in my Thunderbird for a long time now and have been working correctly until now.
How can I prevent this from happening again? I don't want to send people messages from two different emails at the same time.
I'd appreciate any help on this.
Thanks,
Borislav

In my case, TB is sending a copy of all my sent mail to the account that is associated with the smtp server. I have four accounts that I check via TB and the sent mail is being kept in the original folder and also in the sent folder of the account to which the smtp server is connected. If I change the smtp server from one gmail account to another, the sent mail follows. I then have two copies of the sent email, one in the original folder and one in the smtp server account's sent folder. I only want the one in the original folder. How do I stop the sent email from also being saved in the smtp account sent folder?

Collecting and Bundling Messages - One Interface

Hi ,
I am trying this Collecting and Bundling Messages - One Interface my interface is File .
Followed all the steps in the SAP documentation under Examples and Usage cases.
But I get only one message from the inbound channel .
when I check the Mapping in the MONI . It shows 2 instances of interface in the MessageIn but the output message of the BPE moni shows only 1 message . Message that is in the first instance of the Mapping IN .
Is it error in the multi mapping ? can some body through some light on this ..
Regards,
KLK

Hi Behaves & Moor,
S, I am trying the pattren given by SAP . Following the weblink given by Mr.Moorty.
I made source and Target Msg type as 0.. Unbound and Multiline for Transformation step.
But when I test the mapping in the Design time by importing a XML with following structure (Please dont mind bad syntax)
<Messages >
 <ns0:Message1>
 <Filesender_MT >
 <Record>
 <Row>
 <ID>1</ID>
 </Row>
 </Record>
 </ns1:Filesender_MT>
 <Message1>
 <Message2>
 <Filesender_MT >
 <Record>
 <Row>
 <ID>2</ID>
 </Row>
 </Record>
 <Filesender_MT>
 <Message2>
</Messages>
I get only one message :
<Messages >
 <ns0:Message1>
 <Filesender_MT >
 <Record>
 <Row>
 <ID>1</ID>
 </Row>
 </Record>
 </ns1:Filesender_MT>
 <Message1>
<Messages>
which is wht i am getting from the inbound CC.
how do I test Multi Mapping ? and when I check the MONI->PE --> Technical Details --> Mapping --> MappingIN
It shows 1 entry but the nestted table shows both the file contents that I have put in the Sender Communication channel.
I am putting 2 files in the Sender CC and expecting these two file contents to Merge and give me 1 file as out put . this is the scenario understood from the SAP documentation please correct me if I am wrong .
Thanks and Regards
K.L.K

I have an iPhone 4S and my friend has two ipods with two Apple ID's. Why can't he receive messages on "Message" on one and he uses a free text app on the other which receives messages from my phone just fine.

My friend has two ipods. Two Apple ID's and on one ipod he has a free text app on it and only Message on the other. He cannot receive a message from my iphone 4S on the one with Message, but receives it fine on the one with the free text app.
He can also receive a message from my iPad on the one with Message.
My question is how can he recieve a text from my iPhone to the ipod which has a different Apple ID than the other but does not have a free text app?
Also on the ipod he has the free text app he has not upgraded to ios7 and won't.

Are the use the correct email address for the contact? Those are listed in Settings>Messages>Send and Receive. When Messaging somene the iOS devices used the email address (or phone number if applicable) listed in the Contact app for that person.
Thus, it appears the you Contact apps only has that one email address listed for the person you are trying to Message.
If he can send you a Messages can you reply to it? If so save the sender to your Contact app.

Dynamic Error Message from a Bundle Showed in a rich:fileUpload

Hello.
There is a way to show a dynamic error message from a bundle (i.e, There is a problem in the word {0} in line {1}.) in a rich:fileUpload after the Managed Bean method in fileUploadListener="#{MyManagedBean.myMethod}" attribute was performed? That's because the error message parameters are discovered only after the MyManagedBean.myMethod execution.
As far I know, I'm able only to show a static message with transferErrorLabel="#{myBundle.myErrorMessage}" attribute.
Here is my rich:fileUpload component code:
<rich:fileUpload id="upload"
 fileUploadListener="#{PlanilhaManagedBean.importar}"
 maxFilesQuantity="100"
 immediateUpload="true" listHeight="130" acceptedTypes="xls"
 addControlLabel="#{bundle.geralProcurarArquivo}"
 ontyperejected="alert('#{bundle.geralExtensaoInvalida}')"
 cancelEntryControlLabel="#{bundle.geralCancelar}"
 clearAllControlLabel="#{bundle.geralLimparTudo}"
 clearControlLabel="#{bundle.geralLimpar}"
 doneLabel="#{bundle.geralArquivoTransferidoComSucesso}"
 progressLabel="#{bundle.geralTransferindoArquivo}"
 stopControlLabel="#{bundle.geralParar}"
 stopEntryControlLabel="#{bundle.geralParar}"
 transferErrorLabel="#{bundle.geralErroNaTransferenciaDoArquivo}" /> Any idea?
Thanks in advance.

Hi, BalusC. Thanks for your reply.
I already tried that. I put a navigation-rule in faces-config.xml to the same page of the rich:fileUpload, but the rich:fileUpload component doesn't starts a get or a post request. So the navigation-rule is ignored and the page wasn't rendered again.
I also tried to put the <a4j:support ...> in the rich:fileUpload to re-render the <h:messages ...> component, but didn't work too. The <h:messages ...> wasn't re-render.
Thanks in advance.
Edited by: reolca on May 10, 2009 5:40 AM

There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox.

There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox in windows. how can I solve this problem? if I use destop player like windows media player, no such error.
would you please give some solution for this error? thanks!

OS is window10, Metro APP is Xbox or MultiMedia 8; any video format will occur error only by following steps:
a. Put Audio / Media / Photo files into USB thumb disk or Micro SD card.
b. Connect USB thumb disk / Micro SD Card to Platform.
c. Open 'File Explorer', click USB thumb disk.
d. Open audio file with metro app: Music. / Open Media file with metro app: Video./Open Photo file with metro app.

Bundling messages from two interfaces

Similar Messages

Maybe you are looking for