Collection Run

If there is a collection run scheduled on the production system via LBWE on a periodic basis and I decide to run a collection run in between this scheduled run i.e. immediate, can this have an impact on the scheduled run or will the scheduled run continue as scheduled? Thanks

Hi Vidhya,
Thanks for that. Tried what you suggested but had problems, outlined below:
1. Navigate to Job control tab in LBWE, click on Job overview. OK
2. Copy the Job name that you want schedule as Immediate.
In this case it was LIS-BW-VB_APPLICATION_03_100
3. Go to transaction SM37, give your job name and appropriate time and execute.
Have taken LIS-BW-VB_APPLICATION_03_100 but cannot schedule this job from SM37. Gives a message No job matches the selection criteria
4. A new screen with Job overview details would appear. This did not appear
5. Click on the Job and go to menu "Job" -- > Repeat Scheduling. Select immediate to run the job. NA

Similar Messages

Change field catalog in VT05 - Selective logs for collective run

Hi,
Through transaction VT05, we can check shipment log which having following ALV field Catalog.
Collective run
Date
Time
User
Transaction code
Operating mode
Problem class
Expiry date
Keep until expiry
Processing status
But if we want check Delivery number for particular Collective Run then we have to click that collective run and then can check for the Delivery number.
Actually our requirement is to add one more column in above ALV field Catalog of Delivery Number.
I have searched for Enhancements and BADIs, but I did not found suitable one for VT05 log.
Can any one help me out for above issue for adding one more column in above ALV field Catalog of Delivery Number (along with above mentioned ALV field catalog in output) of VT05 log report.

Thanks Nabheet once again...
I would like to show you the coding what I have done in implemented implicit Enhancements.
Following code is written under implemented implicit Enhancements - ZSHIPMENT_DETAIL
Properties of Enhancement Implementation           ZSHIPMENT_DETAIL                          (Active)
Enhancem. Technique: Source Code Plug-In
Description           Showing SHIPMENT Detail in output
Package               $TMP
Original Language     EN
Created               MNIKAM       02/09/2012
Last Changed          MNIKAM       02/19/2012
Superordinate Enhancement Implementation     ZSHIPMENT
Enhanced Development Object:   V54X
SAPLV54X          Static Enhancement Point/Section     \PR:SAPLV54X\FO:LOG_HEADER_DISPLAY\SE:BEGIN\EI
ENHANCEMENT 1 ZSHIPMENT_DETAIL.    "active version
TYPE-POOLS: szal.
DATA: g_l_header_extr     TYPE header_extr.
FIELD-SYMBOLS: <f_g_l_header_extr> TYPE header_extr.
DATA: g_l_log_link        TYPE log_link.
FIELD-SYMBOLS: <f_g_l_log_link> TYPE log_link.
DATA: g_l_t_lognumbers    TYPE szal_lognumbers WITH HEADER LINE.
FIELD-SYMBOLS: <f_log_nr> TYPE log_nr.
data: messages    TYPE TABLE OF balm.
FIELD-SYMBOLS: <f_l_s_message> TYPE balm.
DATA: l_tabix TYPE sy-tabix.
LOOP AT G_HEADER_EXTR_TAB ASSIGNING <f_g_l_header_extr> WHERE status ne 1.
      CLEAR: l_tabix.
      l_tabix = sy-tabix.
      READ TABLE g_log_link_tab ASSIGNING <f_g_l_log_link>
                                 WITH KEY fccnu = <f_g_l_header_extr>-fccnu
                                 BINARY SEARCH.
       READ TABLE <f_g_l_log_link>-log_tab ASSIGNING <f_log_nr> index 1.
       CLEAR: g_l_t_lognumbers.
       g_l_t_lognumbers-item = <f_log_nr>-log_nr.
       APPEND g_l_t_lognumbers.
       CLEAR: messages.
       CALL FUNCTION 'APPL_LOG_READ_DB_WITH_LOGNO'
        TABLES
          lognumbers = g_l_t_lognumbers[]
          messages   = messages.
      delete messages WHERE MSGNO ne 371 AND MSGNO ne 494 AND MSGNO ne 491.
      LOOP AT messages ASSIGNING <f_l_s_message> WHERE LOGNUMBER = <f_log_nr>-log_nr
                                                   AND ( MSGTY   = 'S' or MSGTY = 'W' )   "Message Type S-success & W-warning
                                                   AND MSGID     = 'VW'
                                                   AND ( MSGNO   = 371 or MSGNO = 494 or MSGNO = 491 ). "Message Numbr through which Shipment Number gets
               <f_g_l_header_extr>-tknum = <f_l_S_message>-MSGV1.      "SHIPMENT NUMBER
               CLEAR: g_l_t_lognumbers[].
               exit.
      ENDLOOP.
ENDLOOP.
ENDENHANCEMENT.
Thanks again,
Mahesh Nikam.

Inventory Management Collection run

We would like to increase our Inventory Management Collection run to every 5 minutes (currently every hour). Can anyone forsee a problem with this or have experienced a problem
We have an Unserialized V3 update
Thanks

I do not see any issue. The LUW count of the records getting written to the delta queue might increase marginally, but that should not be an issue.

Stats collection running long in 11g

Oracle11.2.0.1
Sun Solaris.
Stats collection running long for almost 12 hours from 6PM to 6AM daily and stats collection autotask is getting STOPPED after the window duration.
DBA_TABLES.last_analyzed is not getting updated after 2AM in the morning. I believe it is scanning some big tables, but not able to pin point the table/index.
And we've some a bunch of 100GB tables in the DB. Is there a way to find out which table it's gathering stats between 2AM and 6AM and not getting completed?
Thanks for your time!

moreajays wrote:
Hi,
I would suggest to find out those tables with huge Table & last_analyzed is Null , these tables would be possible tables responsible for long run.
Only AWR ot other SQL Hist stats tables can help you to get details.
To fix this issue you should run stats gathering manually in day time (not in maintenance window) either with auto stats or with little estimate_percent (10 or 5)
After getting first successful analyze (manually) , maintenance stats will pick up new incremental stats thereafter
Ajay,
I don't think that your statement that after the gathering the statistics manually, it would be next done incrmentally is correct. The incremental statistics are introduced only for partitioned tables AFAIK. Can you post a link from the documentation that your mentioned behavior exists?
Aman....

SM13 - Error in Collect.Run - Yellow status update records.

Hello,
After some problems with update queues in R/3, we have some update records in yellow status "Error in collective run" in sm13 t-code.
If we run collective run, new records are pushed into rsa7, but this yellow status records won't move, and we actually need them.
Does anyone know how to process this errors?

Hi,
There is no problem with background process, the new update records are being processed with no problem.
These update records remain in yellow status since yesterday, but new records are being processed.

Planning data collection run

Hello!
I need to query the date/time of the last data collection run. Can anyone point me to the right table to get this information?
Cheers!

Look at LRD column in mrp_ap_apps_instances
Hope this helps,
Sandeep Gandhi

Good tool for analysing garbage collection runs?

Hi
Anyone who has/knows a good tool to analyse the garbage collection runs output in the std_serverX.out files for SAP NW 04?
Best regards
Tom

Hi Tom,
The best tool for do that is the SM Diagnostics.
please refer to http://service.sap.com/diagnostics for further details.
All the best,
Luis

03 Collection Run

My understanding is that when I run the collection run job say for 03 application, LUW which contain the record set is moved to the RSA7 queue. Where is this moved from if possible the name of the table or transaction I want to check a before and after status? Thanks

Hi Jaya,
Thanks for that, if there is not an entry in LBWQ i.e. MCEX03 does that mean that there are no records (this is my case) to be collected via the collection run?
If there was an entry in LBWQ after I carried out a collection run this would disappear (assuming no additional postings) is that correct
Message was edited by:
Niten Shah

Difference between extraction collective run and a V3 collective run

Hello Roberto.
As per your weblog can you elaborate on the difference between a Extraction collective run and a V3 collective run for Queued delta and V3 Update respecively,
Regards,
pravin

Hello Roberto,
Fine Roberto I have 3 more questions with regards to Queued delta-
1.     In case of Queued deltas how does the data come to the LBWQ ex. MCEX02 queue from the application technically when a transaction is posted in R/3.
2.     What role does the Function Module MCEX_UPDATE_02_QRFC play in getting the data in LBWQ.
3.     Does the extraction Queue read the update tables VBHDR,VBMOD eventually like the V3 collective run.
Regards,
Pravin

Will the original Sims: Complete Collection run on my mac?

I am running 10.6.8 Snow Leopard, and I just ordered The Sims: Complete Collection for Mac, and I know it's an extremely old game so I'm just nervous it won't run. I know Lion will not play it, so I'm not going to update to it, but will Snow Leopard? Thank you

Im sure you already know by now but yes. The sims complete collection WILL work on snow leopard. I loved that game so much. I was so p***ed off when i upgraded to lion and it didnt work Happy Siming

How do I get a copy of Acrobat with my CS5 Master Collection???

I activated my Adobe CS5 Master Collection (running on Snow Leopard) with a serial number purchased from CDW and everything went smoothly, but after a few days of using the core products I typically use I noticed Acrobat was not included in the installed software.
Now, Adobe lists Acrobat PRO as an included product in the Master Collection and rightfully so since it contans just about every product they make.
When I emailed Adobe about this but the only response I got was some pre-formatted auto-response probably sent to me from the help desk in India or something. The auto-response said absolutely nothing about how to obtain a copy for the Mac, and just had a link taking me to the Acrobat home page, which basically says there is no trial version of Acrobat for Mac available for download.
I gave up on it since I do not use Acrobat very much but now I am in a situation where I do need to have Acrobat Pro to finish a job and I cannot figure out how to get a copy installed with the Master Collection.
There was no disclaimer indicating that you would not be able to get a copy of Acrobat when I purchased the downloadable version vs. buying a boxed DVD set, so I am expecting there must be a way.
Adobe's help has been pretty much useless when I emailed them, and I cannot find anyone with the same problem on Google or in the Adobe forums, so is there someone out there who can give me the answer or help me?
If I have to purchase a seperate copy of Acrobat so be it, but since it is supposed to be included with the Master Suite that would be kind of stupid if I have to purchase a copy of Acrobat seperately.
Thanks to anyone who can point me in the right direction!!!

This is just getting beyond ridiculous...
AND I can see from several forum threads I am not alone in this issue.
Adobe, you absolutely SUCK for making it so difficult to install this software. I am normally a fan of Adobe products, but now that you guys have bought out all your competiton you are getting lazy and stupid.
This is the most ridiculous crap I've ever seen when trying to install a product I PURCHASED!!!!!!!
So, after over another week (I have been trying to find a way to install Acrobat with my purchased copy of the Master Suite for MONTHS)... My IT guy finally gets me the installer DMG for Acrobat and now I cannot install it with my master collection because the serial numbers are not the same?
I never got a god damn serial number for Acrobat Pro when purchasing the master collection.
Asking Adobe for help is totally worthless and not even worth taking the time to do so because all they give you is some BS pre-recorded response that doesn't help you with JACK...
It has been a long time since I've had a problem installing a piece of software I PURCHASED.
BOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!
YOU SERIOUSLY SUCK ADOBE ON THIS ONE!!!!!!!!!!!

High Eden Java Memory Usage/Garbage Collection

Hi,
I am trying to make sure that my Coldfusion Server is optomised to the max and to find out what is normal limits.
Basically it looks like at times my servers can run slow but it is possible that this is caused by a very old bloated code base.
Jrun can sometimes have very high CPU usage so I purchased Fusion Reactor to see what is going on under the hood.
Here are my current Java settings (running v6u24):
java.args=-server -Xmx4096m -Xms4096m -XX:MaxPermSize=256m -XX:PermSize=256m -Dsun.rmi.dgc.client.gcInterval=600000 -Dsun.rmi.dgc.server.gcInterval=600000 -Dsun.io.useCanonCaches=false -XX:+UseParallelGC -Xbatch ........
With regards Memory, the only memory that seems to be running a lot of Garbage Collection is the Eden Memory Space. It climbs to nearly 1.2GB in total just under every minute at which time it looks like GC kicks in and the usage drops to about 100MB.
Survivor memory grows to about 80-100MB over the space of 10 minutes but drops to 0 after the scheduled full GC runs. Old Gen memory fluctuates between 225MB and 350MB with small steps (~50MB) up or down when full GC runs every 10 minutes.
I had the heap set to 2GB initally in total giving about 600MB to the Eden Space. When I looked at the graphs from Fusion Reactor I could see that there was (minor) Garbage Collection about 2-3 times a minute when the memory usage maxed out the entire 600MB which seemed a high frequency to my untrained eye. I then upped the memory to 4GB in total (~1.2GB auto given to Eden space) to see the difference and saw that GC happened 1-2 times per minute.
Is it normal in Coldfusion that the Eden memory would grow so quickly and have garbage collection run so often? i.e do these graphs look normal?
Also should I somehow redistribute the memory available to give the Eden memory more since it seems to be where all the action is?
Any other advice for performance improvements would be much appreciated.
Note: These graphs are not from a period where jrun had high CPU.
Here are the graphs:
PS Eden Space Graph
PS Survivor Space Graph
PS Old Gen Graph
PS Perm Gen Graph
Heap Memory Graph
Heap/Non Heap Memory Graph
CPU Graph
Request Average Execution Time Graph
Request Activity Graph
Code Cache Graph

Hi,
>Is it normal in Coldfusion that the Eden memory would grow so quickly and have garbage collection run so often?
Yes normal to garbage collect Eden often. That is a minor garbage collection.
>Also should I somehow redistribute the memory available to give the Eden memory more since it seems to be where all the action is?
Sometimes it is good to set Eden (Eden and its two Survivor Spaces combined make up New or Young Generation part of JVM heap) to a smaller size. I know your thinking - what make it less, but I want to make it bigger. Give less a try (sometimes less = more, bigger not = better) and monitor the situation. I like to use -Xmn switch, some sources say to use other method/s. Perhaps you could try java.args=-server -Xmx4096m -Xms4096m -Xmn172m etc. I better mention make a backup copy of jvm.config before applying changes. Having said that now you know how you can set the size to bigger if you want.
I think the JVM is perhaps making some poor decisions with sizing the heap. With Eden growing to 1Gb then being evacuated not many objects are surviving and therefore not being promoted to Old Generation. This ultimately means the object will need to be loaded again latter to Eden rather than being referenced in the Old generation part of the heap. Adds up to poor performance.
>Any other advice for performance improvements would be much appreciated.
You are using Parallel garbage collector. Perhaps you could enable that to run multi-threaded reducing the time duration of the garbage collections, jvm args ...-XX:+UseParallelGC -XX:ParallelGCThreads=N etc where N = CPU cores (eg quad core = 4).
HTH, Carl.

Sudden ultra-slow importing issue in LR5.2 - possibly smart collection related?

I've been using LR for almost two years now, and have never seen this before:
This evening I wanted to import a series of images from my card reader using LR (just updated to 5.2 from the 5.2RC); I have ~240 images to import. I always have LR set to convert to DNG on import, and also to save a backup of the original raw file (NEF) onto a separate HDD at the same time. LR has always been pretty fast to carry out this process: normally just a few minutes are required for that amount of images (not including rendering previews once the DNGs are imported). However, today it's suddenly become painfully slow - as I type this, it's so far managed to import a mere 58 images, having so far taken about an hour and twenty minutes! Each image is being added one at a time, with a long pause before the next one clocks up in the 'current import' folder. I've never seen such slow performance with LR before.
I wonder if this is a bug connected to the final release of 5.2? I doubt it, as I would have expected to have heard about this by now, but you never know...
I have recently - in the past few days - set up a number (at least 80) of new smart collections that pick up raw images taken at specific focal lengths, as well as another set picking up specific apertures used for each raw shot in the catalogue (unlike the majority of my pre-existing smart collections, these new collections are purely there for interest really - nice to see which focal lengths are the most used for example - but don't serve as an aid to any specific workflow). In short, I've greatly increased the number of smart collections running in my catalogue. Would having a significant number of smart collections slow down the image ingestion process? For example, is LR updating individual smart collections on the fly as images are imported, and thus having to pick through each collection in order to complete the import (I'd always assumed that this would all be added to a central index in the catalogue that the smart collections feed from, but perhaps there are multiple indexes, one for each smart collection)?
I guess the other possible cause could be a corrupt catalogue, although both the catalogue integrity check and optimisation complete without a hitch and everything else seems to be fine.
I'm on Win7 x64, running the LR catalogue and previews from an SSD (with images stored on a separate HDD), with an i7 3770K CPU, 16GB RAM, and an AMD 5850 Radeon graphics card.
I'd be most grateful to hear the opinions of other LR users.
M

This just started happening to me as well. EVerything was fine and import was what I consider normal until 2 days ago. Had trouble with one camera which kept losing connection. I import from the camera directly...copy as DNG to an internal hard drive. Now all my cameras are importing at a ridiculously slow rate of speed. As far as I know I changed nothing to make this happen. Very odd and cannot find anything about it except for your post. Anyone else out there experiencing this?

Apex 4 , problem with collection executions

Hi ,
I am having the following problem with the execution of one collection :
Reference thread : Re: APEX 4 , executing a remote procedure and populating data using collection
DBNAME ---> list item which I build from the DB links which I built ( as dynamic query in the shared components from a local table which holds entries of dblink names )
USERLIST --> list item of users which should display dynamicaly the users of that db link I choose in DBNAME ( based on a collection )
buttons CANCEL and SUBMIT
4- Initial COLLECTION page process which is calculated before Header :
DECLARE
q varchar2(4000);
BEGIN
IF APEX_COLLECTION.COLLECTION_EXISTS(P_COLLECTION_NAME => 'QRY1') THEN
APEX_COLLECTION.DELETE_COLLECTION(P_COLLECTION_NAME => 'QRY1');
END IF;
q := 'SELECT username , username FROM sys.dba_users@'||:P23_DBNAME ;
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY_B(
P_COLLECTION_NAME => 'QRY1',
P_QUERY => Q);
END;
For USERLIST list item I am using the following in LIST OF VALUES DEFINITION :
SELECT C001, C002 FROM APEX_COLLECTIONS WHERE COLLECTION_NAME='QRY1'
5 - to submit the values from the screen to the remote database procedure I am using the following submit process ON SUBMIT AFTER CALCULATIONS:
DECLARE
v_statement varchar2(255);
BEGIN
v_statement := 'begin
Lock_User@&P24_DBNAME.(''&P24_USERLIST.'');
insert into log values (1,''user locked'') ;
commit ;
end;';
EXECUTE IMMEDIATE v_statement;
END;
The problem :
The form runs sucessfully , where I the USERLIST changes dynamicaly when I change the DBNAME values , but as soon as I logout and login with another user1 , the collection does not execute and i get "ORA-01729: database link name expected".
I login with user1 in edit mode and recreate the collection , run again , the collection executes successfuly .
If I create a new user2 ( using the sample application pages ) and login with the new user2 , i have the same problem , thus I ho login with user2 in edit mode and try to run the collection .
How can I control the collection to execute regardless of the application user logged in ??
thanks in advance
yousef

Hi ,
I am having the following problem with the execution of one collection :
Reference thread : Re: APEX 4 , executing a remote procedure and populating data using collection
DBNAME ---> list item which I build from the DB links which I built ( as dynamic query in the shared components from a local table which holds entries of dblink names )
USERLIST --> list item of users which should display dynamicaly the users of that db link I choose in DBNAME ( based on a collection )
buttons CANCEL and SUBMIT
4- Initial COLLECTION page process which is calculated before Header :
DECLARE
q varchar2(4000);
BEGIN
IF APEX_COLLECTION.COLLECTION_EXISTS(P_COLLECTION_NAME => 'QRY1') THEN
APEX_COLLECTION.DELETE_COLLECTION(P_COLLECTION_NAME => 'QRY1');
END IF;
q := 'SELECT username , username FROM sys.dba_users@'||:P23_DBNAME ;
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY_B(
P_COLLECTION_NAME => 'QRY1',
P_QUERY => Q);
END;
For USERLIST list item I am using the following in LIST OF VALUES DEFINITION :
SELECT C001, C002 FROM APEX_COLLECTIONS WHERE COLLECTION_NAME='QRY1'
5 - to submit the values from the screen to the remote database procedure I am using the following submit process ON SUBMIT AFTER CALCULATIONS:
DECLARE
v_statement varchar2(255);
BEGIN
v_statement := 'begin
Lock_User@&P24_DBNAME.(''&P24_USERLIST.'');
insert into log values (1,''user locked'') ;
commit ;
end;';
EXECUTE IMMEDIATE v_statement;
END;
The problem :
The form runs sucessfully , where I the USERLIST changes dynamicaly when I change the DBNAME values , but as soon as I logout and login with another user1 , the collection does not execute and i get "ORA-01729: database link name expected".
I login with user1 in edit mode and recreate the collection , run again , the collection executes successfuly .
If I create a new user2 ( using the sample application pages ) and login with the new user2 , i have the same problem , thus I ho login with user2 in edit mode and try to run the collection .
How can I control the collection to execute regardless of the application user logged in ??
thanks in advance
yousef

MRP Run in MD01 and MD03 is different

Dears,
I am new to MRP processes. Maybe the problem is trivial maybe not.
We have a 9 000 spare parts and would like to use a limited MRP to help operators to know which number of spare parts is coming to shortage.
I set material master and made some settings in customizing for the plant I use.
After that I choose one material which stock is below reorder point.
I run MD03 and system works fine - it creates a planned order.
However when I run MD01 (or se38 ->RMMRP000) with the same parameters as for MD03 , the system creates nothing. Only telling that MRP was run and which parameters I choose.
I run MD16 to see maybe there are some planned order that system created and did not tell me, but nothing as well.
Only MD03 works if I choose the material. However, collective run MD01 is not working.
Any ideas?

Hi Zhargal,
Could you pls provide some more info on MRP control parameters you use while running MRP with MD01?
Also refer the following thread for more info on MRP
MRP: Frequently Asked Questions
Regards
Mangesh S

Collection Run

Similar Messages

Maybe you are looking for