Color and Color Management boxes in Print Settings greyed out. Using PS CS5.1 with Mac OSX 10.9.5.
For some reason, the above boxes are now greyed out when I go to Print Settings and I am getting prints that are badly distorted. Was working perfectly a few days ago and can't understand why this has suddenly happened ? Am now confused as to what settings I should have in the Color Management dialogue box in order to get back to the correct operation.
I've also been having this problem. My computer now consistently shuts down between 10 seconds and 2 minutes of startup. This only happens if my computer is not plugged in. (my battery has been between 70-90% the entire time.) If I keep it plugged in...no problems.
13-inch, Mid 2013 MacBook Air
1.3 Ghz Intel Core i5, 8 GB 1600 Mhz DDr3).
Similar Messages
-
Redirected Printer Settings Greyed out and Missing Finisher & Trays
Hi,
I have added a new local printer . The printer has 2 additional trays and a finisher added.
When I log onto the terminal server (server 2008 R2), the printer is redirected, but without the extra 2 trays and finisher. Most options are greyed out within the properties of the printer driver.
Same as this issue here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2eeeb270-9cbb-4628-ad22-0ef3df6549d6/printers-not-redirecting-properties-and-preferences
The driver is installed on the server and I have tried disabling the 2 GPO settings 'Use Terminal Services Easy Print printer driver first' and 'Use Remote Desktop Easy Print printer driver first'.
Does anyone know a solution to this??Done a bit more digging and this is done 'by design' by Microsoft (I guess it's a limitation of their printing model, shame they haven't addressed this as the problem goes back to Server 2003 and still unresolved!).
This KB explains the problem: http://support.microsoft.com/default.aspx?scid=KB;EN-US;243942
I can now change the device settings for the redirected printer driver (as per KB article above), but after logging off the terminal server and logging back on, the redirected printer reverts back to the default settings.
This is a massive problem for my customer as they are unable to use most of the features on their new copier (they work within a terminal server environment).
Anyone else had this problem and been able to save changes to the redirected printer settings??
Thanks in advance. -
Disableing the printer color management in the printer settings box
Hello
I am printing on a Epsonstylus r1800 printer using windows 8.. Printer has new drivers v6.55 The Adobe print setup reminds me to disable the printer color management in the print settings box. I can't find where to do this in the print settings box. Resulting in color that is way off. Any thoughts?Must be done in the printer driver.
This is an example for the Epson 3880
First click on Print settings and in the dialog that opens look for Color Adjustment but that differs with the printer model... -
Using an Epson 3880, how to disable the printer's color mgmt in the Photoshop CC print settings dialogue box?
Just select Photoshop Manages Color, and the printer driver color options should be disabled.
-
SAP Gui 7.20 Configure Color Settings Greyed Out
Hi, I have installed the new SAP Gui 7.20 patch 1 on 2 machines at my company. On one machine we can easily change the color settings for each theme. On the other PC, we can not go into "Configure Color Settings" to change the colors for any theme. The button is greyed out. I followed the extact same installation procedure and have the same access to both as well.
Has anyone seen this issue before and know how to fix it?
Thanks,
MartyAnother classic SAP problem where the solution involves patting your head while simultaneously scratching your nuts and jumping up and down.
Follow these steps:
1. open SAP Login Pad.
2. open up a client and click on the 'Customise Local Layout' icon (Alt + F12).
3. Select 'Options...'
4. Select the ironically named 'Enjoy Theme'.
5. Click 'Apply'
6. Click on 'Ok' and close the client windows and the SAP Logon Pad. Note: you must close restart the SAP Login Pad for the them changes to take effect.
7. open the SAP Login Pad.
8. open up a client and click on the 'Customise Local Layout' icon (Alt + F12).
9. Select 'Options...'
10. click on 'Colors in System'
11. select your favourite colour and click on 'Apply'.
12. click on 'Ok'.
If this post can stop even one person from going insane it will have been worth it.
Regards,
Nick -
Where are all the print settings for my HP Officejet 5510 in Mac OS X 10.8.2?? I only have Fast, Fast B & W, and Best. I want Normal so that it looks good but doesn't print so slowly. Help.
Hi,
Change the print settings manually by clicking the lowest drop-down within the print dialog (e.g. the application name, Copies & Pages within MSOffice.
Select Type/Quality and set the print quality as Normal.
You may seve the settings as a Preset from the Presets drop-down menu.
Shlomi -
am trying to set my background setting to change when ever I log in, I clicked on both 'change picture' and 'random order' boxes as my settings, but when ever I log in it has the same background as before. Does any body know how to fix this?
You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
I can't access messages in folders only in my in box. What settings should I use?
I can't access messages in folders only in my in box. What settings should I use? This has just recently happened
Please rephrase your question and provide additional details so we can visualize.
-
my safari is always shutting off and then a box asking me to fill out a report pops up it happens at least once a day, is there anything i could do to stop this?
I think you mean it's crashing or quitting unexpectedly.
Most likely due to third party Safari add ons. Follow the instructions for troubleshooting here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
If you can't resolve the issue, post a crash report so we can try and help you get Safari going again.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder. -
I recently upgraded my Iphone 4s to 5.1.1 and founf the Wi-Fi button in settings greyed out saying No Wi-Fi. I have tried Reset network Settings, Rest All Settings and restore in Itunes but to no avail. I understand this is a comon occurence but I cant find a solution to it. Can anybody help?
See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it. -
I have a Macbook with Mac OSX 10.5.8 and i have a new hp printer that recommends version 10.6 or 10.7. Do i need to upgrade, what version, and how do I get and install this upgrade? Thanks
Full instructions here:
https://discussions.apple.com/thread/4540761 -
Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.
Solution found.
I am a Vodafone customer and installed the Vodafone app which asks you to turn off wifi connection on installation as it needs to communicate with their servers over 3G.
After restoring the iPad via iTunes this is the only app that I did nor re-install and seems to be too much of coincidence that while in full screen view watching films my wifi is switched off and 3G data connection is established 10 - 15 minutes into a fiilm and my data allowance gets eaten up!
I would also get push notifications from Vodafone saying "my daily data usage was almost used" with this app installed.
Have tested and on 3rd time watching sky go still wifi is on after 30 mins.
DO NOT INSTALL VODAFONE APP FROM THE APP STORE. -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
I have an HP Laserjet 5m monochrome printer that I have used for years with our three Mac computers
HP Laserjet 5m monochrome printer C3917A (1997)
Operating system: OSX 10.7.4
Error message: Printer busy
No known changes made to system or configuration
I have an HP Laserjet 5m monochrome printer that I have used for years with our three Mac computers (two on OS X Lion and one on Leopard). I'm using ethernet to connect to a router and then my computer (although I have also tried to connect directly to no avail.) We went away for 2 weeks, returned and got “Printer busy” for all 3 computers. I reset the printer to factory settings. Same problem. By the way, the printer says READY. I then went to System prefs and clicked ‘–‘ in the Print & Scan section to remove the printer. When I tried to add back the printer, nothing shows up. I now remember that this may be because the means of communicating with the printer has now changed and that I had found the printer by somehow adding its address settings (or something). Can anyone help me to reconnect with the printer?
This question was solved.
View Solution.Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.
I've encountered an issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.
The document and printer settings are set for A4 but the print job goes to the printer as A3.
The problem only occurs while printing through Adobe Photoshop CS6.I get into trouble if I choose A4 borderless instead of A4 in the Photoshop Print settings.
There, Tray 2 is dimmed out
To be honest, I don't see borderless in your settings, but my doing that on my printer causes a default to the larger Tray 1.
That's all I have tonight. If I think of anything else, I'll post it. Here's thread on this issue as well.
Wrong paper size sent to the printer
Maybe you are looking for
-
Dear all, I am looking for core-hr tables name. If I need to refer any document, please send me the link for that. Many thanks in advance. Regards,
-
Experts, Do we have any automated tool that will detect joins in the layers ??? secondly in case we start with manually joining the tables will there be any join problems like we have in BO? Third In case of manual joins in physical layer can have to
-
Adobe After Effects CS6 Keeps freezing and crashing.
Hey ive been having this problem where AE CS6 keeps freezing for about 2-3 minutes and it happends many times, also many times it crashes the whole program and after that it wont open CS6 before i restart the whole computer, it worked fine for me be
-
Is there a way to clear the error logs on the collection server so that i can start with a fresh count? Right now I have thousands of errors listed, and I don't really want to have to scroll through all the ones from last year, etc. But I can't find
-
Why does the file cache.db keep reinstalling after deletion?
Was told to delete cache.db file because the Safari window was opening in small print. After deleting the file, closing out safari and reopening Safari, the print seemed normal again for about a second but then went back to smaller print again. Whe