Color correction problem between original sequence and multicam sequence... Please help

I used three camcorders to record a youth dance recital. I created an orginal sequence for the three camcorders and another sequence using the multicam feature to edit the dances. After I finished editing, I went back to the original sequence to make some color correction and brightness adjustments using the Fast Color Correction controls. After that, I sent everything to Encore to create a DVD. When I watched the DVD, I noticed some of my color correction settings were still off, so I went back to the orginal sequence to make some changes. Unfortunately, the multicam sequence would not read the new settings. After a few unsuccessful attempts to get the clip from the multicam sequence to read the clip from the original sequence, I decided to start over by clearing the Fast Color Correction controls from the clip. The multicam sequence then adjusted back matching the original sequence. However, when I started a new Fast Color Correction control in the original sequence, the multicam sequence would not take the new settings. How to I get the mulitcam sequence to read the orginal sequence?

Thank Jim for replying:
I am stumped on this one. I did a few radical tweeks and it did not take. For example, I made one clip in the original sequence go completely dark. However, the clip in the mulicam sequence did not change.
I even deleted the render files and the work area render files and started over with making changes. Nothing. Any change I make on the original sequence will no longer adjust in the multicam sequence.
Any last words of advice before I delete the entire multicam sequence and start over? Thanks.

Similar Messages

Having problems with HP6980 printer and Windows 7, please help

I just replaced my XP computer with a new HP computer running Windows 7. Each time I turn on my HP 6980 printer, it won't print. When I go to Devices and Printers, I see that it is offline. I have to delete the printer and reinstall it to make it work and this solution is only good for the session. I have to repeat the process each time that I turn on the computer. Please help.

Try running this next time you get the issue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...
This should fix the offline issue instead of reinstalling.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

I have a problem between sharing files between garageband Iphone and Garageband Mac, please help!

Help! I´m trying to export my song from garageband Iphone to garageband Mac I do all the steps and it keeps saying that I need a later version of the garageband, I have updated to the latest versions of both available and it keeps saying that same thing.. has anyone actually done this? can anyone help me? I´d be much appreciated I´m going crazy here!
regards

Hey mauricio,
Could you please elaborate what exactly is the issue that you are facing.
Are you able to click on the Acrobat icon?
Also, tell me if you are trying to open PDFs using Acrobat or in a browser?
Is there any specific error message that appears?
Hope to hear from you.
Regards,
Anubha

BLUETOOTH DOESNT WORK BETWEEN 6 PLUS AND LEXUS RX400H PLEASE HELP

I have a iPhone 6 plus - I tried to link my phone via bluetooth to the hands free kit on my Lexus RX400H
The phone kept searching but couldnt find the car
please help

Similar problem here.
Asus Pro 50 SR
Windows Vista Home Premium
Nokia 6275i
Digitus USB dongle, running Broadcom 2045
PC Suite both 7.1.18 and 7.1.26 tried
The phone talks to the computer all right, using Obex File Transfer. However, Nokia PC Suite refuses to connect with Bluetooth.
I had installed a friend’s older D-Link dongle without any issue, but when I put in the (newer) Digitus, PC Suite doesn’t want to play ball.
I have tried uninstalling everything related to Bluetooth, from various different drivers and PC Suite itself. I have uninstalled everything even made by Nokia in my software and begun again. I began with the drivers from the Digitus site (the ones from Broadcom and Asus either fail to install or do not work after installation), then put PC Suite on. I get the same error as others: that PC Suite cannot use the connection type. I also got a ‘Code: Openmedia’ error on other occasions.
I do not know what a ‘stack’ is (which someone suggested tonight) but PC Suite says it cannot access ‘Bluetooth (Microsoft)’ (this is greyed out in the connection types). I was told that I should not have both the Microsoft and the Broadcom drivers running together but the presence of this option suggests otherwise. No matter, I cannot find anything on my six-day-old machine remotely relating to a Microsoft Bluetooth driver, only the Broadcom one.

Difference between Original copy and free copy of application server 10g

what are the difference between Original copy and free copy of application server 10g

Hi,
I think that there aren't free copy of Oracle AS.
If you are a developer or a system architect, you may download Oracle AS for your test.
Mauro

Externalizable problems between v1.3 and v1.4

Hej you.
I have strange problems with the Externalizable objects.
I Use many Object to Save my file, but wien i try to Externalizable on J1.3 and Denalizable again in J1.4 I got this message:
E:\Programmer\Java\ProrgamName>Java ProrgamName
javax.swing.JInternalFrame; Local class not compatible: stream classdesc serialV
ersionUID=8792953236056021037 local class serialVersionUID=-6387351733537024688
Can i trap J1.4 ID to use 1.3 ID, so it can use on ALL platforms, not just locally?
When I Save and load on the same machine it works fine, but not when i moving to another machine with 1.4. Is a another method, or i Need to save all object to AscII instead in this smart method (that are poorly work)? I have surfed around javasoft.com with finding a answear.
See my early quenstien on (closed):
http://forum.java.sun.com/thread.jsp?forum=31&thread=273990
With very regaards By:
Super Bomba, Denmark
PS. No Duke Dollars this time. Sorry.

Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
    Vector values = new Vector();
    Object root = treeModel.getRoot();
    // Save the root, if its Serializable.
    if(root != null && root instanceof Serializable)
    { values.addElement("root");
      values.addElement(root);
    stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
    thisModel.setVisible(false);
    try
    { String title=stream.readUTF();
      rootNode = new DefaultMutableTreeNode(title);
      Vector values = (Vector)stream.readObject();
      int indexCounter = 0;
      int maxCounter = values.size();
      treeModel = new DefaultTreeModel(rootNode);
      if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
      { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
        treeModel = new DefaultTreeModel(root);
        indexCounter++;
      // kode for setting the tree start here
    catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba

Connection Problems Between iChat 3 and iChat 4 Workaround

Maybe this info will help others:
iChat 4/Leopard users must initiate video chat to iChat 3/Tiger users:
I have discovered that if an iChat 4/Leopard user initiates the video chat to an iChat3/Tiger user, it works, but if the iChat3/Tiger user initiates the video chat with an iChat 4/Leopard user it fails with a message saying that the receiver declined the invitation (even if the receiver tried to accept). This happens on a LAN as well as across the Internet.
Likewise, to make conference video chats, make sure the iChat 4/Leopard user initiates, then adds the other parties.
This post is NOT about iChat Server, although the problem occurs there too. If you are using iChat Server (part of OSX Server) see http://discussions.apple.com/thread.jspa?messageID=5995966 ).
Hope this helps.
ppj

Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
    Vector values = new Vector();
    Object root = treeModel.getRoot();
    // Save the root, if its Serializable.
    if(root != null && root instanceof Serializable)
    { values.addElement("root");
      values.addElement(root);
    stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
    thisModel.setVisible(false);
    try
    { String title=stream.readUTF();
      rootNode = new DefaultMutableTreeNode(title);
      Vector values = (Vector)stream.readObject();
      int indexCounter = 0;
      int maxCounter = values.size();
      treeModel = new DefaultTreeModel(rootNode);
      if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
      { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
        treeModel = new DefaultTreeModel(root);
        indexCounter++;
      // kode for setting the tree start here
    catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba

IChat - compatibility problems between v2.1 and v3.1

Hi,
I now have the new iMac Intel with iChat 3.1. I am trying to use it with a friend who has OS 10.3.9 with iChat 2.1.
I can see and hear him, but he can only hear me.
Is there a compatiliby problems between v2.1 and v.3.1 or it is just a configu problems?
Thanks a lot for any information
Bruno

Most likely cause is that you haven't updated the ProApplication Support file. Check here:
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator]. What is the name of the product? Where is the link for download and reinstall? Please help me r

By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator - never disclose publicly]. What is the name of the product? Where is the link for download and reinstall? Please help me rapidly, Best regards / Stefan

Sign in to your Adobe account online and look in the Plans/Products sections to see which program it might have been.

I received a replacement iPad. On my original iPad I had dozens of books and PDF's. I completely backed up my original iPad. The categories of my iBook files transferred but NOT the actual PDF and Books. Please help.

I received a replacement iPad. On my original iPad I had dozens of books and PDF's. I completely backed up my original iPad. The categories of my iBook files transferred but NOT the actual PDF and Books. Please help.

Are the PDFs and ibooks on your computer's iTunes ? If so then you should be able to re-sync them, if not then you can re-download ibooks for free as long as they are still available in the store and you use the same iTunes account as you originally used to buy them : http://support.apple.com/kb/HT2519 . The backup doesn't contain the contents of the ibooks app, so for them to be restored to the device they needed to be in your iTunes library.

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me..

I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me build the string .Below is the query and the out put. ( the string is building fine except the parameters are with out quotes)
here is the procedure
create or replace
procedure temp(
    P_MTR_ID VARCHAR2,
    P_FROM_DATE    IN DATE ,
    P_THROUGH_DATE IN DATE ) AS
    L_XML CLOB;
    l_query VARCHAR2(2000);
BEGIN
l_query:= 'SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
      ||'mi''), ''00:'
      ||'00'',''24:'
      ||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
      ||'mi'')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = '
    ||P_MTR_ID||
   ' AND s_mtrch   = ''1''
    AND s_datetime BETWEEN TO_DATE('
    ||P_FROM_DATE||
    ',''DD-MON-YY'') AND (TO_DATE('
    ||P_THROUGH_DATE||
    ',''DD-MON-YY'') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = '
    ||P_MTR_ID||
    ' AND s_mtrch   = ''2''
    AND s_datetime BETWEEN TO_DATE('
    ||P_FROM_DATE||
    ',''DD-MON-YY'') AND (TO_DATE('
    ||P_THROUGH_DATE||
    ','' DD-MON-YY'') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)';
SELECT DBMS_XMLQUERY.GETXML('L_QUERY') INTO L_XML   FROM DUAL;
INSERT INTO NK VALUES (L_XML);
DBMS_OUTPUT.PUT_LINE('L_QUERY IS :'||L_QUERY);
END;
OUTPUT parameters are in bold (the issue is they are coming without single quotes otherwise th equery is fine
L_QUERY IS :SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),'9999999.000') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),'$9,999,999.00') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),'9999999.000') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,'mm/dd/yyyy') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,'hh24:mi'), '00:00','24:00', TO_CHAR(s_datetime+.000011574,'hh24:mi')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = N3165 AND s_mtrch   = '1'
    AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,'DD-MON-YY') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = N3165 AND s_mtrch   = '2'
    AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,' DD-MON-YY') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)

The correct way to handle this is to use bind variables.
And use DBMS_XMLGEN instead of DBMS_XMLQUERY :
create or replace procedure temp (
p_mtr_id       in varchar2
, p_from_date    in date
, p_through_date in date
is
l_xml   CLOB;
l_query VARCHAR2(2000);
l_ctx   dbms_xmlgen.ctxHandle;
begin
l_query:= 'SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
      ||'mi''), ''00:'
      ||'00'',''24:'
      ||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
      ||'mi'')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = :P_MTR_ID
    AND s_mtrch   = ''1''
    AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
                       AND (TO_DATE(:P_THROUGH_DATE,''DD-MON-YY'') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = :P_MTR_ID
    AND s_mtrch   = ''2''
    AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
                       AND (TO_DATE(:P_THROUGH_DATE,'' DD-MON-YY'') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)';
l_ctx := dbms_xmlgen.newContext(l_query);
dbms_xmlgen.setBindValue(l_ctx, 'P_MTR_ID', p_mtr_id);
dbms_xmlgen.setBindValue(l_ctx, 'P_FROM_DATE', to_char(p_from_date, 'DD-MON-YY'));
dbms_xmlgen.setBindValue(l_ctx, 'P_THROUGH_DATE', to_char(p_through_date, 'DD-MON-YY'));
l_xml := dbms_xmlgen.getXML(l_ctx);
dbms_xmlgen.closeContext(l_ctx);
insert into nk values (l_xml);
end;

IPhone could not be activated because activation server is temporarily unavailable. this is now the third day and nothing improves please help. iTunes says my sim is locked but I can't unlock it

iPhone could not be activated because activation server is temporarily unavailable. this is now the third day and nothing improves please help. iTunes says my sim is locked but I can't unlock it

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
If your iPhone has not been jailbroken, see the troubleshooting suggestions here:
http://support.apple.com/kb/TS3424?viewlocale=en_US

Color correction problem between original sequence and multicam sequence... Please help

Similar Messages

Maybe you are looking for