Colour and transparent boolean

Hello everyone,
I want to set the boolean indicator to colour and transparant. This mean when error occurs, boolean indicator will be changed to red and transparent, so this boolean will not cover the below floor map. I set all boolean onto the actual floor map and i don't want to cover floor map. I can set only transpaent at no error state but i cann't set red colour and transparent at error state.. Is there any way to set. Thanks for all in advances..

Here's a very rough draft of the idea above (LabVIEW 8.5). Of course you should import custom graphics into the boolean indicators for the desired look.
Message Edited by altenbach on 02-13-2009 08:57 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
FloorPlan.vi ‏10 KB
FloorPlan.png ‏27 KB

Similar Messages

Pantone spot colour and transparency don't work together

Using indesign CS5, I make a pantone solid spot colour background.
I import two of the same photos: one a greyscale circular pshop file with transparency surrounding the circle ( the file is not flattened).
The other is the same photo, but I make a clipping path around the circle and then flatten the file and save as a jpg.
Both photos are put on top of the pantone solid color background in Indesign.
I export the indesign file as pdfx 1a using pdf-presets under the file menu.
If I open the pdf in Acrobat and open the "output preview" panel and turn off the "simulate overprinting" box, the pshop photo disappears, but the jpg with the clipping path is fine. They print as they appear: one disappears (Pshop file) and one is OK: the jpg.
If you import the pdfx 1a pdf back into Indesign, you will see that the pshop image has disappeared.
I understand this happens to others not just me. is there a fix?
Does it work with all a spot colours and transparency?
If I save as a higher version of acrobat (say 7). The pdf looks fine and imports back into indesign fine.
And if I send to the RIP the RIP seems to handle it fine. But if I take that Acrobat 7 file and put on a page and export as pdx-1a, I get the same problem

Spot colors and Transparency do not play well together, but can be used together if you follow some rules.
jpg does not support transparency. If you're working within InDesign, you can, and should save as and use psd or tiff. Tiff supports transparency if toggled during the Save As dialog.
x1/a pdf does not support transparency, hence it was lost. In my environment, Press Quality PDF has never failed me, but High Quality and x4 have added benefits of Color Management.
Search for Yucky Discolored Box Syndrome - read the results from InDesign Secrets

Something's wrong with the colours and transparency in iWeb?

Hello
I am building a site with specific colors from the RGB scale and when I publish, the color has different shades. Same problem happens with the % of the color's transparency; on Safari it looks washed out with ugly stripes and shades. Any bug suspicion?
Thank you
Isabelle

Websafe colors are from an era when monitors only could display 16 or 256 colors.
Unless you have a visitor who still uses such monitor, you can safely use all 16 million colors.
About the textbox
iWeb uses the textbox in the Header layer of an iWeb page as the title in the browserwindow.
Do not remove the original textbox, as you cannot replace it other than by selecting another theme and then change it back to the original theme again. Ruining the layout in the process.
If the textbox in the Header is missing, iWeb uses a textbox down the page in the Content layer. If that textbox is also missing, it uses another textbox. If that fails it uses the pagename in the Sidebar.
Sometimes you may want a different text in the titlebar and not display it on the page itself. Or not display it at all.
So use that textbox in the Header layer. Type your text. Then select the textbox. In the Inspector choose T, click a color to open the color palette and drag the opacity slider to 0 (zero).
Do Command-T to open the font palette and make the font smaller. (Or do Command--(minus)) Also use a font that doesn't change to an image. Arial is a good font. Perhaps do it first before making the text invisble.
Resize the textbox. You may want to change the height of the Header layer.
Do Command-Shift-B to move the textbox to the back, possibly behind other objects.
Next add a optional second textbox to the Header layer and use that one to display text on the page.
If you want to move the textbox to the front again to make changes, but can't remember the location on the page, drag the area with the mouse to select the objects.
Deselect objects you do not want to move forward by Command-dragging the mouse over these objects.
Next do Command-Shift-F to move the textbox to the front. Repeat the steps in reverse order to make the text visible.
Practice.

Iphoto export and transparency

Hi People,
Does anyone know how i can make my autoviewer slideshow which I am using with iphoto export have a transparent background so the iweb page behind shows through around the photos?
Right now the frame colour and background colour in the webexport options are: background 181818 and framecolour 181818. Any advice would be appreciated!
Cheers,
Ben (Brazil)

Ben:
I'm not sure what you mean by autoviewer. Is that a 3rd party application or plugin? As far as creating a Quicktime movie file with a transparent background I've never heard of that capability being available in any application.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Show T and F boolean text simultaneously?

I would like to show both True and False boolean text values simultaneously at different locations. Is there any way to do this? I want to use a toggle or rocker switch and be able to see both values at all times.
In an old post Ben and TiTou showed methods to move the text around using property nodes and formating the text with spaces or CR. These only show the selected value, not both.
If the Label, Caption, and Boolean text are all made visible, the effect can be produced. However, this does not allow for programmatic change of all the text, as for language changes, because the label cannot be changed.
For buttons (where the boolean text is usually used) it does not matter, but for rocker and toggle switches this would allow a nicer, more professional GUI. I cannot think of a use case for the transitions texts (T>F and F>T) with these switches, but any option to display the boolean texts simultaneously would have to include those for compatibility.
I have attached a VI which shows the look I would like to achieve.
Lynn
Message Edited by johnsold on 07-03-2008 09:52 AM
Attachments:
Show both boolean text.vi ‏9 KB

Hi Lynn,
I would use a simple text indicator (classic look, set to transparent) to immitate that behaviour. Instead of changing the boolean state texts you simply write to that indicator...
Just a thought: you can create an XControl to hide that functionality from your block diagram
Btw.: Where's your vi? Ok, now it's there...
Message Edited by GerdW on 07-03-2008 03:53 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How do you change the click box properties (line colour and width) in Captivate 7.0?

How do you change the click box properties (line colour and width) in Captivate 7.0?

Yes certainly, we can do that, insert a smart shape and use it as a button, then go to the properties pane, change the Alpha to 0, that will make it transparent, and add the stroke color as red and increase the width.
In case of a button, you have to select button type as transparent and do the same.
Thanks.

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry

Problem with colours and tonalty in LR 1.1 conversions

Im having hard times trying to get great colour and tonalty out of LR conversions. Some times it seems that its just impossible to get there where I want with LR. No matter how much I tweak sliders in Calibration Tab or in Colour Adjustment Tab, subtle tones and colours are just impossible to get.
Example
Both pictures have been edited in converters only resizing and text has been inserted in photoshop. Picture taken with Konica Minolta 7D.
http://luotokuva.fi/noudettavat/Oranssi_2.jpg
1. Under cloud there is subtle colour gradient with DxO conversion that LR conversion lacks
2. Colour transitions in DxO versions have much more life. There is just one tone on lake in LR vesion.
3. Suns reflection in LR conversion clips and is ugly. Again DxO verson has far more natural tonalty.
For those who believe they can do better job with LR conversion here is the raw file for them to play.
http://www.luotokuva.fi/noudettavat/PICT0906.zip
I hope LR conversions would be better because programs usability is far better than DxOs.
-Sampsa Kaijaluoto - Finland

The problem is not in the tone, but in the lack in the number of tones. I can change the colors, but i can't get the colors to slide in a perfect gradient. Look these images:
This is how the area around the sun should look (Canon DPP)
http://jkphoto.pp.fi/upload/sun_dpp.jpg
And this is how Lr converts it with defaults:
http://jkphoto.pp.fi/upload/sun_acr.jpg
In past i have done accurate profiles for my cameras to ACR with the color checker and calibration script and calibration has no effect on how the tones just clip off.

My iTunes 11.0 (mac) has a black background colour and I can not see all of the information. How do I change the background colour in iTunes 11.0 (mac)

My iTunes 11.0 (mac) has a black background colour and I can not see all of the information for each song. How do I change the background colour in iTunes 11.0 (mac) so I can see check boxes etc. My download window shows no information, it is entirely black.

Trent o
Someone else in the forum told me how to do this. If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode. If you don't have Onyx, I'd suggest getting it. It is freeware and used to help maintain your system. Good luck
Paul

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

MY PRINTER ONLY PRINTS IN COLOUR, AND I WANT TO ONLY PRINT IN BLACK AND WHITE

HI, AND GREETINGS,
IVE BEEN TRYING TO SOLVE THIS PROBLEM FOR SOME TIME BUT I CANNOT FIND A SOLUTION TO IT. IVE WANTED TO PRINT SOME DOCUMENTS BUT IN BLACK AND WHITE ONLY - INSTEAD OF COLOUR BUT I CANT SEEM TO FIND THE SETTING IN WHICH I CAN TURN OFF THE COLOUR, AND TO JUST USE BLACK INK
MY PRINTER IS:
HP COLOUR LASERJET PRO MFP M177FW
AND I AM USING A MACBOOK PRO 2010 VERSION
WOULD LOVE TO GET A RESPONSE FROM YOU GUYS TO HELP ME OUT,
KINDEST REGARDS,
W3 GUD

Hi @W3GUD ,
I see that you would like to set the printer to print with just the black toner. I would like to help you out with this issue today.
Depending on which operating system you are using and what driver was installed for the printer, the Grayscale option should be under Paper/Quality.
From the application, go to File, Print, click on the dropdown for the printer preferences and select Paper/Quality.
Click on the Color Options dropdown and then select Grayscale.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Laserjet M177fw)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, you might have to click the drop down to select the printer's name to add it in.
What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT4623 My iPad 1 keeps freezing when I try to set up an account with the apple store .Insert all details including payment details. The screen turns grey colour and then freezes. Help,,,,,,

My iPad 1keeps freezing every time I try to access apple store. I complete all the information including payment account details lithe screen turns grey colour and then freezes . Help please.

App store or Apple store

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

Try resetting the printing system:
OS X Mavericks: Reset the printing system
Next try deleting the system and reinstall the printer..
BTW this is Mac Pro desktop forum

Find same type with same colour and height in the document

Hi,
is it possible to select text with the same colour and height and anything else as the text which is already selected in CS4. I know that this tool exists in freehand but I can't find this tool in CS4. F.E. I have selected white text, bold, height 12, Arial and I want that ILCS4 finds any similar text and selects it so that I can edit this text.
Thanks
Regards
Uli

Hi Paul,
thanks for the reply. I tried already the things you proposed, but how do you select only the text with the format as I described before and not all text or any other element with white fill colour. I only want to select white text, height 12, arial, bold. Is it possible to select only these text format anf nothing else in the documant. So I need a tool to make more fine selections possible, especialy to find same text format.
Regards
Ulrich

SVG to PDF/AI gradient and transparency issues

This is probably quite off topic for these forums, so apologies for that up front, but I can't seem to get answers in more appropriate places.
I am trying to use inkscape or rsvg-convert, which both use cairo, to convert SVG to PDF.
Firstly, when I open the SVG in Illustrator directly, everything works as expected, but the cairo converted PDF has a couple of problems.
Typically I get "An unknown shading type was encountered" and the offending shapes are un-editable "images" with a clipping mask over them.
There are two circumstances that result in problems for me.
1) A gradient with only 2 stops.
In the following example I have duplicated the offset="0" stop which fixes things and means that the resulting shape that is filled with this gradient works fine. Without the duplicate declaration, the gradient is converted to an un-editable image with a clipping mask when the PDF is viewed in Illustrator.
   <linearGradient id="ian_symbols_b8a58aafc1f12e74492e9e865b7f569b" gradientUnits="userSpaceOnUse" x1="113.7275" y1="136.9414" x2="197.0259" y2="136.9414">
    <stop offset="0" style="stop-color:#927A62" id="stop1472" />
    <stop offset="0" style="stop-color:#927A62" id="stop1472_dup" />
    <stop offset="1" style="stop-color:#93866F" id="stop1474" />
   </linearGradient>
2) A shape that has an opacity that is less than "1". I don't know how to fix this one and still maintain the look of the original. I understand that there are some issues with transparency and the PDF format, but obviously the full AI version of the PDF format these days supports transparency.
Does anyone have any experience doing server-side conversions of SVG to PDF and have managed to create a PDF which contains gradients and transparency that are actually editable once opened in Illustrator?
Or does anyone know if there is something more I can do with the original SVG code to make the opacity work ok in the final PDF?
Thanks

Works fine for me as .ai with pdf comptible turned on. You may have input transparency in the wrong location in Illustrator. Change opacity in the gradient palette, and not tint in the color palette.
Opacity is 0 here, anything less tha 100% will create tranaprency. To proof in Illustratopr do a Shift Command D to change your background to a checkerboard pattern.

Colour and transparent boolean

Similar Messages

Maybe you are looking for