Coloured Text

I am trying to develop an editor for 8085 assembly language programming. I need to display all key words like MVI MOV ADD ADDI etc in a colour different than the rest of the text. How do I do it? Any help would b greatly appreciated.

http://www.discoverteenergy.com/files/SyntaxDocument.java
The above class in an attempt to highlight java keywords, which it does pretty well. Most of the code in the class is related to highlighting multi-line comments, which it doesn't do very well. If all you need is keyword highlighting take a look at the keyword highlight code and throw out the rest.

Similar Messages

  • Different coloured text in one Textbox

    Can someone PLEASE help me!!!!!!!!!!!!!!
    I need to know how to have different coloured text in the same textbox.
    My application has text being inputted into the textbox every 5 seconds from 2 different sources. I want to differenciate the text by showing the user 2 different colours for each source.
    Thank you very much

    Acording to the first post it also shows data, so it is a GUI component. i never sow a textbox.
    JTextPane can show data in different colors. also JTextArea can.
    Noah

  • Multi-coloured text in table cell

    I have a table where individual cells can have multi-coloured text. To do this I use html when I set the text in a cell renderer. It works fine. However, when the column width is too narrow for the text then the text is wrapped. If the text is not html then the text is not wrapped.
    How can I keep the different colours but make sure the text is not wrapped?
    Thanks

    I never want the text to wrap even if the column width is too small for the text.
    If the text of the renderer was set to abcdefghijklmnand the column is only large enough to show the first 10 chars then the user (obviously) would only see the first 10 chars.
    If I now set the text to <html>ab<font color="#ff0000">cde</font>fghijklmn</html> then, assuming the column is wide enough, the user will see all the text but cde is shown in red.
    However, if the column width is now changed so there is only room to show the first 10 chars then the user will only see abcde not as I would hope abcdefghij

  • Different coloured text in the same crawl

    How can i have different coloured text in a crawl, whenever i use any of the text funciotons, if i change the colour it changes the coulour for all the text, can i not just simply highlight bits and make them different colours?
    cheers,
    Matt

    Use the Boris Title Crawl generator that came bundled with FCP. It will allow you to assign different attributes to individual characters. Alternatively you can do this in Photoshop or with the CHV text generators. http://www.chv-plugins.com/cms/Fx-Script/Text-collection/Text-collection.php?nav anchor=1010026
    -DH

  • Colouring text in photoshop elements 9

    I have tried choosing the text layer, selecting the text and choosing a colour from the menu at the top of the screen and I have tried selecting each letter individually and trying to block fill them with the paintpot tool,but the letters remain black.  Any suggestions?

    Thanks for responding so quickly.
    They are both set to RGB color.
    Date: Wed, 12 Mar 2014 00:54:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Colouring text in photoshop elements 9
        Re: Colouring text in photoshop elements 9
        created by vsh07 in Photoshop Elements - View the full discussion
    Can you please check if:
    1. Image>Mode is RGB Color
    or
    2. File>New>Blank File:Color Mode is RGB Color
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6201925#6201925
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6201925#6201925
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6201925#6201925. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How do I get two colours text

    Hi,
    I am using photoshop demo, and i am having problems to make two coloured text. I have windows 7. I have tried to right click on the teaxt layer, but I cant do anything

    One way is to use a Gradient Overlay layer style
    more info:
    http://psd.tutsplus.com/articles/tools/gradient-overlay-layer-styles/
    http://www.bigstockphoto.com/blog/working-inside-the-gradient-editor/
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-77e1a.h tml

  • How to write  HTML Colour Text in Workflow Builder Tool?

    I need to add simple text in existing Messages.How do we achieve the colour text in workflow.Please see below example which are bold letters .I need to display in Red Colour.I see several examples in Html codes.But it doesn't work out in Oracle workflow Builder
    Example:
    Sample email
    Action: 'Approve'
    If forwarding this document to another person, please enter their user-id
    below
    Forward To: 'JM439T'
    Note
    Note: 'This is a test Note'
    NID[17216930/241559840683420603286105087217072705302@PRODWFM]
    Please help !!
    Thanks
    Sandeep

    Hi;
    I suggest check below links which may helps you on your issue:
    Oracle® Workflow Administrator’ s Guide
    http://download.oracle.com/docs/cd/B19306_01/workflow.102/b15852.pdf
    Oracle Workflow Developer's Guide
    http://download.oracle.com/docs/cd/B19306_01/workflow.102/b15853/T361836T362168.htm
    Regard
    Helios

  • Colouring Text

    Hi, I hope I make sense with this.
    I want to display a list showing completed sections. I would
    very much like to display those sections completed in a different
    colour.
    So I was going to start with,
    Contents := “Sections” ^ Return
    Then I was going to use ‘Contents := Contents ^
    “Section 1” ^ Return
    then ‘Contents := Contents ^ “Section 2” ^
    Return and so on.....
    If the section had not been visited then the flow-line would
    just add the text in normal black font colour, if the section had
    been visited I would like to use a decision icon to add the text in
    a green font colour by-passing the add black text icon.
    Is there a way I can add different coloured text to a string?

    The Pc Doctor wrote:
    > Hi, I hope I make sense with this.
    >
    > I want to display a list showing completed sections. I
    would very much like
    > to display those sections completed in a different
    colour.
    >
    > So I was going to start with,
    >
    > Contents := ?Sections? ^ Return
    >
    > Then I was going to use ?Contents := Contents ^ ?Section
    1? ^ Return
    > then ?Contents := Contents ^ ?Section 2? ^ Return and so
    on.....
    >
    > If the section had not been visited then the flow-line
    would just add the text
    > in normal black font colour, if the section had been
    visited I would like to
    > use a decision icon to add the text in a green font
    colour by-passing the add
    > black text icon.
    >
    > Is there a way I can add different coloured text to a
    string?
    >
    >
    Embed a test statement an colour the whole thing including
    the curly
    brackets the colour you want. Eg.
    {test(foo,"red text","")}{test(~foo,"blue text","")}
    Andrew Poulos

  • Setting to enable Pixma MP560 to print colour text?

         Hi!
         Hope I am in the appropriate section for this problem. I am unable to get my Pixma MP560 to print colour text. Ink levels fine. Is there a setting for this when I click print?
         Regards,
         DG.

    It has to be something in Page Setup.
    Or when the print dialog box comes up there must be a Printer properties dialog button. Open that and make sure it is set to print in color.
    In the System Preferences Printer & Scan is there any settings for the printer.
    As usual working with a Windows PC seem much easier.
    EDIT:
    When you go to Print in the print dialog window is there a Presets section? If there is for your printer click on that and at the bottom there should be "Show Presets..
    Open that  and select a color preset or some that doesn't say B&W.
    Message was edited by: Shootist007

  • Coloured text cycle

    Hi there,
    Need some help in creating text (individual letters) cycling through different colours. For example each letter cycling through say 6 colours, each letter a different colour to the next. Trying to create a behavior to do this but without much luck. Any suggestions??

    Here's what I'd try. Add 6 different Sequence Text behaviors, each one the same length, but offset in the timeline. Set the color as the parameter and give each one a different color. Keep the spread at 0 for all behaviors.
    The sequence text behavior will change the color of each individual letter in your word. Offsetting the position of the other behaviors ensures that each character has a different color. You'll also probably have to increase the Loops parameter to 2 so that each color appears on each letter at least once.
    Andy

  • Getting coloured text in DefaultStyledDocument

    I am using JTextPAne with DefaultStyledDocument.Every character typed into the document will have an attribute and depending on that attribute the colour of the character should be changed.
    When I run my application and enter characters of same attribute they display fine but when i type a character with different attribute then the colour of whole text
    changes to the colour of the last typed characters colour in a line.
    for Example :
    attribute of 'a,b,c,d,e........'= 3; color =black
    attribute if "1,2,3,4,5,.........."=2; color = blue
    attribute of '/' , ';'....................=4; color = green
    when i type abc they r displayed in black
    if i type 1 following the above text then the whole text that is abc1 is displayed in blue
    if i type '/' following the above then the whole text abc/ is displayed in green
    We want each character display the colour depending on its own attribute .
    please suggest some solution for this.

    hey
    U r probably using setCharacterAttributes() -> this function takes a boolean argument which specifies whether the new attributes r applied to ONLY the strings inserted thereafter, or to the whole document. just check the syntax and set the correct boolean argument for setCharacterAttributes() and u will get the thing to behave as u want! :)

  • Different colour text in textarea

    Hi,
    I was hoping someone could tell me whether it's possible to change the colour of text that is appended to a textarea.
    I'm finishing off a chat server/applet project and i thought it would look better if I could colour code the messages that are displayed on the screen. e.g when a user enters a room the text signifying that is displayed in red, when a user leaves the room the text is coloured red etc.
    I would greatly appreciate any help on this
    Chers
    Mikey

    Sadly to say it is not possible JEditorPane or JTextPane is the only way

  • Coloured Text in Textfield?

    Text in a textfield in a different colour... is this possible?
    Thanks in advance..
    Sandra

    Take a look at polish
    www.j2mepolish.org

  • How to send a bold and coloured text as an email text using forms.

    Hi
    I am using oracle 9i as database and forms 10g .
    I have wriiten a procedure in database to send email.
    In the form on button click I am calling this procedure and sending email.
    But I am not able to set the font, colour, style (bold,italic etc..) of the email text (that I am sending from forms).
    Could you please tell me how can I do that?
    regards

    If you wrote your database send mail package to support different MIME Types, then you need to change the MIME Type to HTML before you add the HTML tags to your email message body. Check out this article (Sending Email from the database with UTL_SMTP package) and look at the "maildemo.sql" package provided in the article. This package will show you how to set the MIME Type to support HTML message bodies.
    Hope this helps,
    Craig B-)
    If a response is helpful or correct, please mark it accordingly.

  • Incorrectly coloured text when saving to .PDF using Photoshop CS4

    I am using Photoshop CS4 on Windows 7, and have designed my own business card.
    When saving to .PDF to send to printers I am finding that a small section of text is saving with a white section to it, for example out of the 3 lines of text on the card the bottom left hand corner of the & sign I have in the design is coming out white, the rest of the text is a golden colour.
    I have tried searching on this forum and on google but can't seem to find anyone with my actual problem so unsure where to go.
    Any help much appreciated.
    Thanks

    Mylenium wrote:
    Well, you could change the native text color instead of using layer styles, could you not?
    Mylenium
    Or make the Type and Hyphen layers into a single Smart Object and clip a yellow layer to it.

Maybe you are looking for