Column values with invalid characters

How to find the column values with invalid chararcters
meaning value upper(col) not in ('ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890')
For ex.
1. CDAssyKit,DragonNaturallySpeaking�Preferred7.0,USEnglish
2. CDAssyKit,DragonNaturallySpeaking Preferred7.0,USEnglish
Query should retrieve only the first row, since it has extra � character in the column value.
Thanks for your help.

Convert all letters and numbers to an arbitrary letter and then remove that letter. If there are any characters left, they are invalid according to your rules.
select *
from t
where replace(translate(lower(column_name), 'abcdefghijklmnopqrstuvwxyz0123456789', 'a'), 'a') is not null;

Similar Messages

Filter column value with special characters

HI,
I have a table table1 with a varchar column column1 having a value(ASW'JK'TH)(the column value itself has special charater'').Please help me with a quwery to filter this value
Regards
ASwathy

db version is 11g:
in_identifer VARCHAR2 (200) := q'[RM'2007'29]';
I need where condition for a tabel coumn with teh above value

Renaming files with invalid characters in their names on NTFS partitions, introduced by operating systems other than Windows

Essentially, Linux created some files with colons (:) in the name on a NTFS partition where I have Windows installed. I have since uninstalled Linux, but now I can only view these files in Windows Explorer. I can't open them, I can't even rename them to
correct the problem. It's as if they don't exist, because of the invalid search paths.
If I try to rename them in Windows Explorer I get following message.
The file name you specified is no valid or too long.
Specify a different file name.
Well isnt' that something?... isn't that nice? Windows is able to display these files, but it doesn't allow me to open them and it certainly doesn't like me to rename them. So why is it whining about it then, when I'm trying to help? It says "try a different
file name". Yeah, right! Like I haven't tried that one already! It doesn't matter what file name I input it will never accept it.
So what am I supposed to do now? Ditch Windows and go back to Linux? Surely, Microsoft doesn't like the sound of that. Sure, I could reinstall Linux or run a Linux live system to correct the problem. But what good is Windows then? I might as well switch to
Linux altogether.
After doing some research I now know by fact that it's (kind of) possible to rename files from UNIX and UNIX-like operating systems to those compliant with Windows by using something called file name character translation. To some level this is essential and
necessary for Windows interoperability with other operating systems (Windows is not the only operating system in the world). But this seems to be very complicated and I can't get my head around it. My brain is in overload. I don't know where to start.
Once there was a...
There's the Windows Services for UNIX (SFU) 1.0, 2.0, 3.0, 3.5. The first two versions were based on MKS Toolkit, a package licensed by Microsoft from MKS Inc. The later versions were based on the similar Interix product, after Microsoft purchased the company
that made it.
Then there's the new Subsystem for UNIX-based Applications (SUA). These are services for UNIX components. They are supposed to have Client for NFS v3 included as well. But the server components from the SFU line is missing (e.g. Server for NFS). These are included
in Server editions of Windows.
Then there's the Microsoft Knowledge Base article
289627: "How to Enable File Name Character Translation". This article seems to describe exactly my situation.
Windows and UNIX operating systems have restrictions on valid characters that can be used in a file name. The list of illegal characters for each operating system, however, is different. For example, a UNIX file name can use a colon (:), but a Windows
file name cannot use a colon (:). If a UNIX user attempts to create a file with a Windows illegal character on a Windows Services for UNIX network file system (NFS) share, the attempt is unsuccessful and the UNIX client computer receives an input or output
error.
It goes further than that. At first glance, this KB article also seems to offer a solution to this exact problem, with examples as shown below.
For example, the following maps the UNIX colon (:) to a Windows dash (-):
0x3a : 0x2d ; replace client : with - on server
I checked these values in charmap.exe and they are correct. Except for 2D not being a "dash", it's rather a hyphen ("hyphen minus" to be exact), but these two have pretty much the same appearance and they get interchanged a lot, I'm sure
they are used to it by now. (Yes, the characters! They don't mind.)
Then there's this registry key.
HKEY_LOCAL_MACHINE\Software\Microsoft\Server For NFS\CurrentVersion\Mapping
Well, of course, I don't have Server for NFS. So this is a dead end. Well, actually, it was a dead end from the beginning...
1. First of all, I'm not working with a network share on a NAS or SAN storage. The files are on the local disk drive where Windows is installed, so that's a DAS for you.
2. I don't have SFU! Well obviously, I'm on Windows Vista! So that means SUA!
3. SUA are service components only. No server components. Can you guess what that means? Yeah... no "Server for NFS" since it's a server component.
4. Windows Vista is a client side operating system! Server for NFS is only offered for use with Windows Server systems.
5. Back to square one!
So there you have it. They all lived happy for the rest of their lives...
I'm stuck here. Can someone tell me what to do? I mean beyond the obvious option to use Linux to fixa a Windows problem? The NTFS file system itself supports colons in file names. It's Windows that doesn't, and so by default it proclaims it invalid character.
Surely, even a Windows client operating system like Windows Vista should be able to allow the user to at least rename files with invalid characters to something more sensible (from the system point of view) and valid, if not being able to open them as they
are. Just add some crazy voodoo code to it and it will work. If you can make it possible on Windows Server with UNIX user-mode subsystem on NT kernel, then what's stopping you from giving the Windows client system the same benefit?
So what now? Purchase a Windows Server 2012 R2 license, copy my invalid files to a NAS share with NFS on a UNIX or Linux system, and have a go at the Windows registry and Server for NFS? Yeah... you're right, it's probably a bit over the top...
On a second thought... I might as well install Linux again. There are countless situations where Linux has helped me solve problems related to, and more often than not caused by Windows.

Essentially, Linux created some files with colons (:) in the name on a NTFS partition where I have Windows installed. I have since uninstalled Linux, but now I can only view these files in Windows Explorer. I can't open them, I can't even rename them to
correct the problem. It's as if they don't exist, because of the invalid search paths.
If I try to rename them in Windows Explorer I get following message.
The file name you specified is no valid or too long.
Specify a different file name.
Well isnt' that something?... isn't that nice? Windows is able to display these files, but it doesn't allow me to open them and it certainly doesn't like me to rename them. So why is it whining about it then, when I'm trying to help? It says "try a different
file name". Yeah, right! Like I haven't tried that one already! It doesn't matter what file name I input it will never accept it.
So what am I supposed to do now? Ditch Windows and go back to Linux? Surely, Microsoft doesn't like the sound of that. Sure, I could reinstall Linux or run a Linux live system to correct the problem. But what good is Windows then? I might as well switch to
Linux altogether.
After doing some research I now know by fact that it's (kind of) possible to rename files from UNIX and UNIX-like operating systems to those compliant with Windows by using something called file name character translation. To some level this is essential and
necessary for Windows interoperability with other operating systems (Windows is not the only operating system in the world). But this seems to be very complicated and I can't get my head around it. My brain is in overload. I don't know where to start.
Once there was a...
There's the Windows Services for UNIX (SFU) 1.0, 2.0, 3.0, 3.5. The first two versions were based on MKS Toolkit, a package licensed by Microsoft from MKS Inc. The later versions were based on the similar Interix product, after Microsoft purchased the company
that made it.
Then there's the new Subsystem for UNIX-based Applications (SUA). These are services for UNIX components. They are supposed to have Client for NFS v3 included as well. But the server components from the SFU line is missing (e.g. Server for NFS). These are included
in Server editions of Windows.
Then there's the Microsoft Knowledge Base article
289627: "How to Enable File Name Character Translation". This article seems to describe exactly my situation.
Windows and UNIX operating systems have restrictions on valid characters that can be used in a file name. The list of illegal characters for each operating system, however, is different. For example, a UNIX file name can use a colon (:), but a Windows
file name cannot use a colon (:). If a UNIX user attempts to create a file with a Windows illegal character on a Windows Services for UNIX network file system (NFS) share, the attempt is unsuccessful and the UNIX client computer receives an input or output
error.
It goes further than that. At first glance, this KB article also seems to offer a solution to this exact problem, with examples as shown below.
For example, the following maps the UNIX colon (:) to a Windows dash (-):
0x3a : 0x2d ; replace client : with - on server
I checked these values in charmap.exe and they are correct. Except for 2D not being a "dash", it's rather a hyphen ("hyphen minus" to be exact), but these two have pretty much the same appearance and they get interchanged a lot, I'm sure
they are used to it by now. (Yes, the characters! They don't mind.)
Then there's this registry key.
HKEY_LOCAL_MACHINE\Software\Microsoft\Server For NFS\CurrentVersion\Mapping
Well, of course, I don't have Server for NFS. So this is a dead end. Well, actually, it was a dead end from the beginning...
1. First of all, I'm not working with a network share on a NAS or SAN storage. The files are on the local disk drive where Windows is installed, so that's a DAS for you.
2. I don't have SFU! Well obviously, I'm on Windows Vista! So that means SUA!
3. SUA are service components only. No server components. Can you guess what that means? Yeah... no "Server for NFS" since it's a server component.
4. Windows Vista is a client side operating system! Server for NFS is only offered for use with Windows Server systems.
5. Back to square one!
So there you have it. They all lived happy for the rest of their lives...
I'm stuck here. Can someone tell me what to do? I mean beyond the obvious option to use Linux to fixa a Windows problem? The NTFS file system itself supports colons in file names. It's Windows that doesn't, and so by default it proclaims it invalid character.
Surely, even a Windows client operating system like Windows Vista should be able to allow the user to at least rename files with invalid characters to something more sensible (from the system point of view) and valid, if not being able to open them as they
are. Just add some crazy voodoo code to it and it will work. If you can make it possible on Windows Server with UNIX user-mode subsystem on NT kernel, then what's stopping you from giving the Windows client system the same benefit?
So what now? Purchase a Windows Server 2012 R2 license, copy my invalid files to a NAS share with NFS on a UNIX or Linux system, and have a go at the Windows registry and Server for NFS? Yeah... you're right, it's probably a bit over the top...
On a second thought... I might as well install Linux again. There are countless situations where Linux has helped me solve problems related to, and more often than not caused by Windows.

Set JArray values with invalid key value: "LastUpdatedTime" on new alert rule creation

Hey all!
I'm trying to create a new alert rule using version 0.9.11 of the Monitoring Library and am getting this error on alertsClient.rules.CreateOrUpdate:
"Set JArray values with invalid key value: "LastUpdatedTime". Array position index expected."
That's interesting because LastUpdatedTime is a DateTime object, and whether I set it or I don't, if I set a breakpoint, it does set itself correctly, but the API appears to be expecting a JSON hash?
I've tested alertsClient and I'm able to get existing alerts (also metrics with metrics client), so I don't believe it's an access issue.
Any ideas?
The full code I'm using for the test (borrowed virtually verbatim from the Cloud Cover video
here):
Rule newRule = new Rule
Name = "CPU Over 90%",
Id = Guid.NewGuid().ToString(),
Description = "CPU Has been over 90% for 5 minutes",
IsEnabled = true,
LastUpdatedTime = DateTime.Now,
Condition = new ThresholdRuleCondition
Operator = Microsoft.WindowsAzure.Management.Monitoring.Alerts.Models.ConditionOperator.GreaterThan,
Threshold = 90,
WindowSize = TimeSpan.FromMinutes(5),
DataSource = new RuleMetricDataSource
MetricName = "Percentage CPU",
ResourceId = "",
MetricNamespace = ResourceIdBuilder.BuildCloudServiceResourceId(<cloudservicename>, <deploymentname>)
RuleAction action = new RuleEmailAction
SendToServiceOwners = true,
newRule.Actions.Add(action);
OperationResponse alertResponse = alertsClient.Rules.CreateOrUpdate(new
RuleCreateOrUpdateParameters { Rule = newRule });
Console.WriteLine("Create alert rule response: " + alertResponse.StatusCode);

Hi Greg,
Thanks for your post!
Error "JArray" has been fixed in the latest nugget package.
Refer to:
http://www.nuget.org/packages/Microsoft.WindowsAzure.Management.Monitoring/
Hope this helps!
Regards,
Sadiqh

How can I replace column value with a particular value in SQL

Hi All,
Can anyone please tell me how can I format my output with replacing a column value with a specific value which actually depends on the present value of the column
I am executing the following SQL statement
select state,count(id) from <table_name> where composite_dn= <composite_dn_name> group by state;
My Present output is:
State No.Of Instance
1 3
3 28
I want to replace the value in the column state as follows
State No.OfInstances
Completed 3
Faulted 28
I want "1" to be reppaced by "Completed" and "3" to be replaced by "Faulted"
Is is possible with SQL or PL/SQL , if it is then how can I achieve this required result. Please help!!
Thanks in Advance!!
Edited by: Roshni Shankar on Oct 27, 2012 12:38 AM

Hi Roshni,
I guess this CASE clause can be simulated by a DECODE and also it is very easy to use.
Refer -- http://www.techonthenet.com/oracle/functions/decode.php
select decode(t1.state,t2.state_id,t2.state_name), t1.count_id
from <table_2> t2, (select state,count(id) count_id
from <table_name>
where composite_dn= <composite_dn_name>
group by state) t1
where t1.state = t2.state_id;HTH
Ranit B.
Edited by: ranit B on Oct 27, 2012 2:02 PM
-- link added
Edited by: ranit B on Oct 27, 2012 2:19 PM
-- sample code added

Reg : Concatenation of a column value with multiple rows... URGENT

Hello,
Could any of u help me in concatenating a column value with
multiple rows ???
For ex : I've the following data from emp table :
DEPTNO ENAME
10 KING'S
30 BLAKE
10 CLARK
10 TOM JONES
30 ALLEN
30 JAMES
20 SMITH
20 SCOTT
20 MILLER
10 MILLER
20 rajeev
I want the following output :
deptno Concat_value
10 KING'S,CLARK,TOM JONES,MILLER
20 Rajeev,MILLER,SMITH,SCOTT
30 BLAKE,ALLEN,JAMES
Thanks in Advance,
Srini

Hello Naveen,
Thanks for ur answer. But I need a single SQL query for getting
what I want. I know the solution in PL/SQL.
Please try it in a single SQL....
Thanks again,
Srini

Tabular model column rename with special characters - ), *, /, +, %, [ etc

I am working in tabular model 2012. I have requirement to rename the column names with special characters like ), *, /, +, %, [ etc. When I try to rename in my model, it gives me below error:
I also tried renaming the columns after creating a new test model with no luck. I may have lived with this error however we have another tabular model which contains special charaters in the name. This makes me believe that there must be some setting that
I am missing.
I tried changing the column name in other model having some special characters and it takes it.
I have gone through this link#
https://connect.microsoft.com/SQLServer/feedback/details/802009/ssdt-ssas-tabular-column-name-with-special-characters
and
http://msdn.microsoft.com/en-us/library/gg492144(v=sql.110).aspx which says that special characters are not allowed in column names however I am able to do it in one of our
models then why not others.
Any help is appreciated! Thank you for you time.
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

Well Mr. Google helped me.. I got the solution:
Databases of a specific modality and compatibility level can have object names that include reserved characters. Dimension
attribute, hierarchy, level, measure and KPI object names can include reserved characters, for tabular databases (1103 or higher) that allow the use of extended characters.
How to change the compatibility, just right click on the .bim file from SSDT and go to properties and change the compatibility to 1103.
I hope this will help someone. :-)
Useful MSDN Links:
http://msdn.microsoft.com/en-us/library/bb522632.aspx
http://msdn.microsoft.com/en-us/library/jj674204.aspx
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

Copying filenames with invalid characters in OSX

I'd like to copy some folders for back up to an external hard disk from the internal hard disk on my G4. Problem is that some of the folders contain files were created in OS 9 and their filenames contain "/" symbols which apparently are not acceptable in OS X (10.3.9) which I am now running. After trying to drag the folders containing the files to the external hard disk I get an error message saying that they can't be copied because some of the filenames contain invalid characters. The problem files are scattered among files in many folders all over my G4's internal hard disk, and the task of finding and manually changing each one's filename is daunting. Is there a way to find and replace "/" with "." ? or some other more automated fix of the invalid characters? I'd prefer to keep the original files in their current folders on the G4. thanks
G4 Mac OS X (10.3.9)

Does any of this software do what you want?
(20586)

Dynamic column Name# Contains Invalid Characters. Bind_table() fails

Hi WD experts,
I have tried to use the bind_table() on a dynamically generated table. Now it happens that this dynamic table contains columns like NAME# . This gave rise to a dump :
The Name NAME# Contains Invalid Characters. Valid Characters are A-Z, 0-9, _, and /.
Other tables which do not have such columns are correctly bound.
In my method , I first loop over the field catalog to retrieve some field names from a dynamicallt generated report...
LOOP AT lt_fieldcat_out INTO lwa_fieldcat.
    comp-name = lwa_fieldcat-fieldname.
    comp-type ?= cl_abap_typedescr=>DESCRIBE_BY_DATA( lwa_fieldcat-FIELDNAME ).
    APPEND comp TO comp_tab.
ENDLOOP.
structure which represents the dynamic table
struct_type = cl_abap_structdescr=>get(
                                          p_components = comp_tab
                                          p_strict = abap_FALSE   ).
node_info = wd_context->get_node_info( ).
node_info = node_info->add_new_child_node(
                              name        = 'DYN_TAB_NODE'
                              IS_MANDATORY                 = ABAP_TRUE
                               IS_MANDATORY_SELECTION       = ABAP_FALSE
                               IS_MULTIPLE                  = ABAP_TRUE
                               IS_MULTIPLE_SELECTION        = ABAP_FALSE
                               IS_SINGLETON                 = ABAP_FALSE
                               IS_INITIALIZE_LEAD_SELECTION = ABAP_FALSE
                              static_element_rtti = struct_type
                              is_static = abap_false
struct_type = node_info->GET_STATIC_ATTRIBUTES_TYPE( ).
Afterwards, I bind a dynamic table to the new node...
Do you have an idea how to circumvent this ?
Thank you,
cheers,Zied.

cols have to be changed

I want to display one column values with multiple symbols

i am created one report.
my column name is offshore & on shore i want display 3 values with % symbol, then i want show 4 th value as $ 2000,
but it was allowing only one format $ or % but i need to display symbols with my values.

Try the following :
give a name to the following formula like @getvalue
Numbervar x;
if
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex)= 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Employee"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Contractor"), CurrentSummaryIndex) = 0 and
//(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Mgt consult"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Clerical"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Other"), CurrentSummaryIndex) = 0
then
x:=0
else
x:=(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex))
(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex)+
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Employee"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Contractor"), CurrentSummaryIndex) +
//GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Mgt consult"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Clerical"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Other"), CurrentSummaryIndex)
) * 100
Now create a new formula and check the value of the above formula :
if {@getvalue} > 50 Then
"$"&{@getvalue}
else
{@getvalue}&"%"
Hope this will resove the issue.
Thanks,
Sastry

Comparing two column values with multiple Parameter in VC (Indicator)

Hello VC experts,
GM
I would like to know about how to indicate multiple parameter with different colour in same column and also comparing value with adjucent column.
Eg.
Parameters     ,,           Column1      ,,              Column 2       ,,            Indicator (Image)
Parameter 1    ,,             a1             ,,                     b1          ,,                  RED
Parameter 2    ,,            a2              ,,                     b2          ,,                  GREEN
Parameter 3    ,,            a3              ,,                     b3          ,,
Parameter 4    ,,            a4              ,,                     b4          ,,
In case I : Parameter -1     Column 1 ( value) = more is better compared to Column 2
In case II : Parameter -2     Column 1 ( value) = Less is better compared to Column 2
How to acheive this INDICATOR based value comparison.
Edited by: Sunil B. Mundhe on Mar 7, 2009 6:30 AM
Edited by: Sunil B. Mundhe on Mar 7, 2009 6:38 AM

Hi
This is possible in VC. You have to insert 'Image' UI in the required table. Add images of alert through 'Image manager' (Tools tab). Select relevant images of alert in 'Image' UI. In display there is option for 'visibility condition' there you enter condition (like if greater than ,true,false).
Like wise you can add multiple 'Image' UIs in that table & based on visibility conditions you will get these alert images in table.
Regards
Sandeep

Crystal Reports XI - How to pull same column value with different select...

I have a report with many (around 30) sub reports and it is giving serious performance issue. I am currently finding out a strategy to improve the performance. I see that most of the sub reports are taking same parameters from main report except for one parameter which is different for each sub report and hard coded in them and pulling up the same column value from a oracle database with a different select criterion. I am trying to find out a way using either of command/crystal formula/SQL expression which can do the same job for me and give me performance improvement. I tried to take the parameters from the main report in one sub report and mapped them to parameters being transferred to the command and then drag and drop the field for which I need to display the value but due to some reason it is not returning values when I am trying multiple commands...I need some help in selecting a strategy for this issue resolution and some guidance....Any help would be highly appreciated....

My version is 11.5.8.826. First of all I need to make it clear that I have 6 set of sub reports and each set has 5 sub reports. So if I can resolve the issue for one set, I resolve it for all. The sub reports are doing nothing but fetching a column value using a simple SQL SELECT query and appending to the right of a box in main report. The issue is that all these queries embedded into the sub reports are using same SQL except for one parameter in the "where" clause and they are fetching same column value from the database and fortunately all of them are returning same number of results. So at the end these results create a table when run. The only way I can stop using sub reports is by creating a table in the main report and use some object(formula/command/SQL expression or whatever) to fetch that column value using the same filter conditions. But please take a note that I need to use and append the same column value from a database table and use different filter conditions and append them to the right so that at the end they create a table...as long as I get the table in the output with a decent performance , anyone will be least bothered about what I used inside the report.....please ask me as many questions to get more lights on the issue....

Comparison of multiple column values with a single column value

I have two separate tables say Tab1 and Tab2
I want to select some datas , which is common to both the tables.
In tab1 , there is a column 'STATE' and it's value is 'A'
In tab2, there are multiple columns for the state, say STATE_A,STATE_B, STATE_C ETC and a row is present with the following details
STATE_A = 1, STATE_B =1 ,STATE_C =0,STATE_D=1
I need to select STATE when STATE_A ='1',
if my STATE='B', this STATE has to be selected since STATE_B =' 1', similraly
if my STATE='D', this STATE has to be selected since STATE_D =' 1',
If my STATE='C', STATE_C should not get selected since it's '0'.
Is it possible to do this in a single SELECT statement, where I have some other checks also or else how can I achieve it?

Maybe this will help
Select * from STATE_MAS ;
STATE
A
B
D
F
H
Select * from STATE_CHILD
STATE_A STATE_B STATE_C STATE_D STATE_E STATE_F STATE_G STATE_H STATE_I STATE_J
1 0 0 1 1 0 0 0 0 0
CREATE OR REPLACE FUNCTION GET_STATE (P_VAL VARCHAR) RETURN NUMBER IS
V_SQL VARCHAR2(200);
V_COL VARCHAR2(35);
P_RETURN NUMBER ;
BEGIN
V_COL := 'STATE_'||P_VAL;
V_SQL := 'SELECT 1 FROM STATE_CHILD WHERE '||V_COL||' = 1 ';
EXECUTE IMMEDIATE V_SQL INTO P_RETURN ;
RETURN P_RETURN ;
END;
SELECT STATE FROM STATE_MAS
WHERE GET_STATE(STATE) = 1 ;
STATE
A
D

How to add one column value with grand total

hi,
this is my perform.i am just here multipling menge and gpres value and stores into G_total variable and displing into output.
this is my output in main window.
ex:mat. 1           77.00(g_total value)
    mat 2             55.00(g_total value)
now the requirement is to add the column and display the output as grand total ex: 77.00 +55.00 = 132.00
how to do the syntax please help me......???
FORM get_total TABLES   in_tab STRUCTURE itcsy
                          out_tab STRUCTURE itcsy.
DATA: lv_menge(20),
        lv_gpreis(20),
        g_total(20),
        g_total1(20).
DATA:lc1 TYPE string,
       lc2 TYPE string,
      ls_tab      TYPE itcsy,
     l_tabix        TYPE sy-tabix.
READ TABLE in_tab WITH KEY name = 'RESBD-MENGE'.
IF sy-subrc EQ 0.
    lv_menge = in_tab-value.
ENDIF.
READ TABLE in_tab WITH KEY name = 'RESBD-GPREIS'.
IF sy-subrc EQ 0.
    lv_gpreis = in_tab-value.
ENDIF.
REPLACE ',' INTO lv_gpreis WITH ''.
CONDENSE lv_gpreis NO-GAPS.
READ TABLE out_tab WITH KEY name = 'G_TOTAL'.
IF sy-subrc EQ 0.
    g_total = lv_menge * lv_gpreis.
    out_tab-value = g_total.
    CONDENSE g_total.
    lc1 = g_total+0(2).
    lc2 = g_total+2(3).
    CONCATENATE lc1 lc2 INTO g_total SEPARATED BY ','.
    out_tab-value = g_total.
CLEAR ls_tab.
    LOOP AT out_tab INTO ls_tab.
      l_tabix = sy-tabix.
      CASE ls_tab-name.
        WHEN 'G_TOTAL'.
          ls_tab-value = G_TOTAL.
      MODIFY out_tab FROM ls_tab INDEX l_tabix.
ENDCASE.
    ENDLOOP.

>
asissahu wrote:
> hi.
>
> nobody is replying my question???
>
> please help me
Hi, Asissahu
Because may be some one have problem to read your code
Please have a look at the following link and past code this way.
[How to post code in SCN|How to post code in SCN, and some things NOT to do...;
@Naga Please you too
Regards,
Faisal

Verify if a report has a null column value with JavaScript ?

Hi,
I have report. User can add new rows through a form. Before the user leaves the application I would like to use JavaScript to check if a certain column has some null values. I built my JavaScript for the before logout and it's working properly, but I need to retrieve if that column has some null values, how can I do that ? This field isn't a mandatory one, but I would just like to alert the user.
Thank you.

You can also use a TRIM function in Answers. Go to the column in question, click on the fx button and then on the Function button. Click on String and you will see TrimLeading, TrimTrailing and TrimBoth. Use TrimTrailing on your column and you should be good to go.

Column values with invalid characters

Similar Messages

Maybe you are looking for