Comparing two column values with multiple Parameter in VC (Indicator)
Hello VC experts,
GM
I would like to know about how to indicate multiple parameter with different colour in same column and also comparing value with adjucent column.
Eg.
Parameters ,, Column1 ,, Column 2 ,, Indicator (Image)
Parameter 1 ,, a1 ,, b1 ,, RED
Parameter 2 ,, a2 ,, b2 ,, GREEN
Parameter 3 ,, a3 ,, b3 ,,
Parameter 4 ,, a4 ,, b4 ,,
In case I : Parameter -1 Column 1 ( value) = more is better compared to Column 2
In case II : Parameter -2 Column 1 ( value) = Less is better compared to Column 2
How to acheive this INDICATOR based value comparison.
Edited by: Sunil B. Mundhe on Mar 7, 2009 6:30 AM
Edited by: Sunil B. Mundhe on Mar 7, 2009 6:38 AM
Hi
This is possible in VC. You have to insert 'Image' UI in the required table. Add images of alert through 'Image manager' (Tools tab). Select relevant images of alert in 'Image' UI. In display there is option for 'visibility condition' there you enter condition (like if greater than ,true,false).
Like wise you can add multiple 'Image' UIs in that table & based on visibility conditions you will get these alert images in table.
Regards
Sandeep
Similar Messages
-
Reg : Concatenation of a column value with multiple rows... URGENT
Hello,
Could any of u help me in concatenating a column value with
multiple rows ???
For ex : I've the following data from emp table :
DEPTNO ENAME
10 KING'S
30 BLAKE
10 CLARK
10 TOM JONES
30 ALLEN
30 JAMES
20 SMITH
20 SCOTT
20 MILLER
10 MILLER
20 rajeev
I want the following output :
deptno Concat_value
10 KING'S,CLARK,TOM JONES,MILLER
20 Rajeev,MILLER,SMITH,SCOTT
30 BLAKE,ALLEN,JAMES
Thanks in Advance,
SriniHello Naveen,
Thanks for ur answer. But I need a single SQL query for getting
what I want. I know the solution in PL/SQL.
Please try it in a single SQL....
Thanks again,
Srini -
Compare two dropdownlists values with each other!!!!!!
Hi ,
I have two dropdown s with some values i want to compare two dropdowns values. I have java script on the click event of the button it will compare values of drodpowns. If any redundant/duplicate value found then those values need to be deleted from the second dropdown.
function dummy()
var dd1=xfa.resolveNode(form1.Page1.State.somExpression); //path to first dropdown
var dd2 = xfa.resolveNode(form1.Page1.Dummy.somExpression); //path to second dropdown
var i =0;
var j=0;
if(State.length!= 0)//State is first dropdown
for (;i<dd1.length;i++)
for(;j<dd2.length;j++)
if(dd1.getDisplayItem(i)==dd2.getDisplayItem(j))
dd2.deleteItem(j); //deleting the value from second dropdown.
break;
else
continue;
But this function is not working properly it is taking first value of the DD1 and comapring with all the values of DD2 and coming out of the loop .There are other values in the DD1.So for that comapring is not happening.
Please help me !!!
Thanks in advance,
Bharathi.Hi,
You just need to re-initialise the j variable each time though the i loop. As you have it the second time around j will already be equal to dd2.length so will skip the inner loop.
try
for(var j=0;j<dd2.length;j++)
Regards
Bruce -
I want to display one column values with multiple symbols
i am created one report.
my column name is offshore & on shore i want display 3 values with % symbol, then i want show 4 th value as $ 2000,
but it was allowing only one format $ or % but i need to display symbols with my values.Try the following :
give a name to the following formula like @getvalue
Numbervar x;
if
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex)= 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Employee"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Contractor"), CurrentSummaryIndex) = 0 and
//(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Mgt consult"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Clerical"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Other"), CurrentSummaryIndex) = 0
then
x:=0
else
x:=(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex))
(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex)+
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Employee"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Contractor"), CurrentSummaryIndex) +
//GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Mgt consult"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Clerical"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Other"), CurrentSummaryIndex)
) * 100
Now create a new formula and check the value of the above formula :
if {@getvalue} > 50 Then
"$"&{@getvalue}
else
{@getvalue}&"%"
Hope this will resove the issue.
Thanks,
Sastry -
How to compare single value with multiple values
In my query I have something like this:
A.SOR_CD=B.SOR_CODE where A and B are 2 different tables. This condition is in the where clause. The column in table A has single values but some values in table B have multiple comma separated values (822, 869, 811, ..). I want to match this single
value on the left side with each of the comma separated values. Please let me know how will I be able to do it. The number of comma separated values on the right side may vary.Hi MadRad123,
According to your description, you want to compare single value with multiple values in your query. Right?
In this scenario, the table B has comma separated values, however those comma separated values are concatenated into a string. So we can use charindex() function to return the index of the table A value. And use this index as condition in
your where clause. See the sample below:
CREATE TABLE #temp1(
ID nvarchar(50),
Name nvarchar(50))
INSERT INTO #temp1 VALUES
('1','A'),
('2','A'),
('3','A'),
('4','A'),
('5','A')
CREATE TABLE #temp2(
ID nvarchar(50),
Name nvarchar(50))
INSERT INTO #temp2 VALUES
('1','a,A'),
('2','A,B'),
('3','c'),
('4','A,C'),
('5','d')
select * from #temp1 a inner join #temp2 b on a.ID=b.ID
where CHARINDEX(a.Name,b.Name)>0
The result looks like below:
Reference:
CHARINDEX (Transact-SQL)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
How can I compare single value with multiple value...
Hello,
I want to compare one value with multiple values, how can it possible ?
Here in attachment I tried to design same logic but I got problem that when I entered value in y that is compared with only minimum value of x, I don't want that I want to compare y value with all the x value and then if y is less then x while loop should be stop.
I want to do so because in my program some time I didn't get result what I want, for example x values is 4,5,6,7,8 and y value is suppose 6 then while loop should be stop but here it consider only minimum number and its 4 here so while loop is not stop even y is less then 7 and 8. So I want to compare y value with all the entered values of x and if y is less then any of x values then while loop should be stop and led should be ON.
Please guide me how can I do so.....
Solved!
Go to Solution.
Attachments:
COMPARISON.vi 8 KBAnkitRamani wrote:
Thank you very mach for your help..
may be i have solved this ....i have made one change in my vi that instead of min. i select max and max. value is compare with the value of y and then if y is less then the max. while loop will be stop other wise its run continuously.
this is working fine...
any ways thanks again for your help and time...
I have to agree with Lewis - his way is more efficient.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
ALV column header with multiple rows and ALV column header span
How could I have in an ALV a column header on several lines and/or a column header that spans on multiple columns?
i.e. I would like to have in an ALV two columns, each with it's own distinct header and additionally another column header for both of the columns, that spans across both columns. How could I program this?Hi,
follow below mentioned code
SET THE LABEL OF THE COLUMN
DATA: hr_weeknum TYPE REF TO cl_salv_wd_column_header.
CALL METHOD lr_weeknum->get_header
RECEIVING
value = hr_weeknum.
CALL METHOD lr_weeknum->set_resizable
EXPORTING
value = abap_false.
hr_weeknum->set_prop_ddic_binding_field(
property = if_salv_wd_c_ddic_binding=>bind_prop_text
value = if_salv_wd_c_ddic_binding=>ddic_bind_none ).
set the text of the column
CALL METHOD hr_weeknum->set_text
EXPORTING
value = 'C Form'.
Regards,
Srini. -
How To Concatenate Column Values from Multiple Rows into a Single Column?
How do I create a SQL query that will concatenate column values from multiple rows into a single column?
Last First Code
Lesand Danny 1
Lesand Danny 2
Lesand Danny 3
Benedi Eric 7
Benedi Eric 14
Result should look like:
Last First Codes
Lesand Danny 1,2,3
Benedi Eric 7,14
Thanks,
David JohnsonStarting with Oracle 9i
select last, first, substr(max(sys_connect_by_path(code,',')),2) codes
from
(select last, first, code, row_number() over(partition by last, first order by code) rn
from a)
connect by last = prior last and first = prior first and prior rn = rn -1
start with rn = 1
group by last, first
LAST FIRST CODES
Lesand Danny 1,2,3
Benedi Eric 7,14Regards
Dmytro -
Compare previous column value in BPS Layout
How to compare the two column values in BPS layout.
My layout format
PO NO
GL
Actual
Amount
1001
701
1200
User Entry
Actual Value is 1200, User will enter the Amount but it should be equal to 1200 or less then that.
If user entered more than 1200 in Amount column, I should get error message.
Thanks in advance.
Regards,
KiruthikaHi Uryukin Andrey,
Where do we need to use this fox formula? Could you please explain steps to use this FF?
Thanks,
Harry -
Comparing the current value with the previous one in Powershell
Hi,
New to scripting and i was wondering how can I compare the current value with the previous value?
I am having trouble with the loop structure, and I am not sure I am on the right track...
I am trying to compare the record to next record in the same csv file after import-csv... My code runs fine, but is not giving the right result.
$FilePath = Get-FileName -initialDirectory "C:\"
#Testing for null
If($FilePath)
$Data = Import-csv -Path $FilePath | Sort-Object BUYER, {[int] $_.PO_NBR}, {[int] $_.LINE_NBR}
Foreach($fData in $Data)
$i = $fData
Foreach($i in $fData)
if($fData.Buyer -eq $i.Buyer)
#save all the same buyer name to a new variable
Write-Host "Same as previous"
Else
Write-Host "Variable is null"
Remove-Item function:\Get-FileNameThank you. The Foreach loop is now working properly.
Can I ask what is the purpose of "-ea 0" in the import-csv? I can't seem to find "-ea" as a parameter for import-csv in help.
-ea is short for -ErrorAction.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing) -
Concatenate a column value across multiple rows - PDW
We are using PDW based on SQL2014. We require an efficient logic on how to concatenate a column value across multiple rows. We have the following table
T1
(CompanyID, StateCD)
Having following rows:
1 NY
1 NJ
1 CT
2 MA
2 NJ
2 VA
3 FL
3 CA
We need a code snippet which will return following result set:
1
CT,NJ,NY
2
MA,NJ,VA
3
CA,FL
We have tried built-in function STUFF with FOR XML PATH clause and it is not supported in PDW. So, we need a fast alternative.Hi Try this:
SELECT * INTO #ABC
FROM
SELECT 1 AS ID,'NY' AS NAME
UNION
SELECT 1 AS ID,'NJ' AS NAME
UNION
SELECT 1 AS ID,'CT' AS NAME
UNION
SELECT 2 AS ID,'MA' AS NAME
UNION
SELECT 2 AS ID,'NJ' AS NAME
UNION
SELECT 2 AS ID,'VA' AS NAME
UNION
SELECT 3 AS ID,'FL' AS NAME
UNION
SELECT 3 AS ID,'CA' AS NAME
)A
CREATE TABLE ##CDB (ID INT, NAME NVARCHAR(800))
DECLARE @TMP VARCHAR(MAX),
@V_MIN INT,
@V_MAX INT,
@V_COUNT INT
SELECT @V_MIN=MIN(ID),@V_MAX=MAX(ID) FROM #ABC
SET @V_COUNT=@V_MIN
WHILE @V_COUNT<=@V_MAX
BEGIN
SET @TMP = '' SELECT @TMP = @TMP + CONVERT(VARCHAR,NAME) + ', ' FROM #ABC
WHERE ID=@V_COUNT
INSERT INTO ##CDB (ID, NAME) SELECT @V_COUNT AS ID ,CAST(SUBSTRING(@TMP, 0, LEN(@TMP)) AS VARCHAR(8000)) AS NAME
SET @V_COUNT=@V_COUNT+1
END
SELECT * FROM ##CDB
OR
SELECT * INTO #ABC
FROM
SELECT 1 AS ID,'NY' AS NAME
UNION
SELECT 1 AS ID,'NJ' AS NAME
UNION
SELECT 1 AS ID,'CT' AS NAME
UNION
SELECT 2 AS ID,'MA' AS NAME
UNION
SELECT 2 AS ID,'NJ' AS NAME
UNION
SELECT 2 AS ID,'VA' AS NAME
UNION
SELECT 3 AS ID,'FL' AS NAME
UNION
SELECT 3 AS ID,'CA' AS NAME
UNION
SELECT 5 AS ID,'LG' AS NAME
UNION
SELECT 5 AS ID,'AP' AS NAME
)A
CREATE TABLE ##CDB (ID INT, NAME NVARCHAR(800))
DECLARE @TMP VARCHAR(MAX),
@V_MIN INT,
@V_MAX INT,
@V_COUNT INT
SELECT @V_MIN=MIN(ID),@V_MAX=MAX(ID) FROM #ABC
SET @V_COUNT=@V_MIN
WHILE @V_COUNT<=@V_MAX
BEGIN
SET @TMP = '' SELECT @TMP = @TMP + CONVERT(VARCHAR,NAME) + ', ' FROM #ABC
WHERE ID=@V_COUNT
SELECT @V_COUNT AS ID ,CAST(SUBSTRING(@TMP, 0, LEN(@TMP)) AS VARCHAR(8000)) AS NAME INTO #TEMP
INSERT INTO ##CDB (ID, NAME) SELECT ID, NAME FROM #TEMP WHERE NAME<>''
DROP TABLE #TEMP
SET @V_COUNT=@V_COUNT+1
END
SELECT * FROM ##CDB
Thanks Shiven:) If Answer is Helpful, Please Vote -
Oracle SP for comparing 80 column values across 8 table pairs in 2 diff DBs
Hi All,
I have an Oracle SP for comparing 80 column values across 8 table pairs in 2 diff DBs.
However, it is taking hell lot of time around 6hours to process 10,000 records.
Can anyone suggest how to fine-tune this?
Thanks guys.Tables prefixed with X are the temp tables to store data of DB-A.
The report will be originally based on DB-B, so DB Links will not be required for @PROD1.WORLD tables.
This is a test region, so I have pointed to @PROD1.WORLD to test with Prod Data.
SEC_COMPARE_CONFIG is the config table containing the table_name to be reported, corresponding temp tables to store the data and the columns on which it is to be reported.
There are in total 8 tables- 90 rows and 8 temp tables.
SPOKE_TO_HUB_SEC_MTCH_TBL records the securities on which it is to be reported.
HIST_DATA_COMPARE_TBL is the final results table.
Here is the entire code:
CREATE OR REPLACE PACKAGE SECURITY_COMPARE AS
PROCEDURE PROCESS_RECORDS (IN_EFFECTIVE_DATE IN DATE,
IN_PRIMARY_ASSET_ID IN VARCHAR2 DEFAULT NULL);
PROCEDURE IDENTIFY_SECURITIES ( P_EFFECTIVE_DATE IN DATE,
P_PRIMARY_ASSET_ID IN VARCHAR2 DEFAULT NULL);
PROCEDURE RETREIVE_RECORDS_FROM_SPOKE;
PROCEDURE COMPARE_RECORDS(p_err_msg OUT VARCHAR2);
PROCEDURE INSERT_DATA_TO_TABLE ( v_target_table VARCHAR2, v_sql_to_run VARCHAR2, v_commit_after NUMBER);
END SECURITY_COMPARE;
CREATE OR REPLACE PACKAGE BODY SECURITY_COMPARE AS
/*Declared String for recording Dynamic SQL's*/
LC_SQL VARCHAR2 (20000);
PROCEDURE PROCESS_RECORDS(IN_EFFECTIVE_DATE IN DATE,
IN_PRIMARY_ASSET_ID IN VARCHAR2 DEFAULT NULL)
AS
L_EFF_DATE DATE;
L_PRIMARY_ASSET_ID VARCHAR2(100);
k_err_msg VARCHAR2(100); --Error message displayed in case of NO discretionary records found.
BEGIN
L_EFF_DATE := IN_EFFECTIVE_DATE;
L_PRIMARY_ASSET_ID := IN_PRIMARY_ASSET_ID;
IDENTIFY_SECURITIES(L_EFF_DATE,L_PRIMARY_ASSET_ID); --Calling the Identify_Securities procedure to identify the securities older by 90 days from report effective date
RETREIVE_RECORDS_FROM_SPOKE(); --Retreiving the historic records from the security tables into temporary tables.
COMPARE_RECORDS(p_err_msg=>k_err_msg); --Compare the records and report the discrepencies into HIST_DATA_COMPARE_TBL table
END PROCESS_RECORDS;
PROCEDURE IDENTIFY_SECURITIES(P_EFFECTIVE_DATE IN DATE,
P_PRIMARY_ASSET_ID IN VARCHAR2 DEFAULT NULL)
AS
P_EFF_DATE DATE; --Effective Date of the report
P_PRIMARY_ID VARCHAR2(100); --Primary AssetID which is used to search based on specific security
v_target_table VARCHAR2(500); --Variable indicating the Target table for inserting the data
v_sql_to_run VARCHAR2(5000); --Variable to store the Dynamic SQL to be executed
v_commit_after NUMBER; --Variable to define after how many records is COMMIT to be done
BEGIN
LC_SQL :='';
P_EFF_DATE := P_EFFECTIVE_DATE;
P_PRIMARY_ID := P_PRIMARY_ASSET_ID;
/*Deleting Old Entries from SPOKE_TO_HUB_SEC_MTCH_TBL table*/
LC_SQL := 'TRUNCATE TABLE SPOKE_TO_HUB_SEC_MTCH_TBL';
EXECUTE IMMEDIATE LC_SQL;
IF(P_PRIMARY_ID is NULL) --In case records do not need to be identified on basis of specific security
THEN
/*Identify Securities older by 90days from report effective date*/
v_target_table := ' SPOKE_TO_HUB_SEC_MTCH_TBL';
v_sql_to_run := 'WITH T AS ('||
' SELECT R.PRIMARY_ASSET_ID PRIMARY_ASSET_ID_R,'||
' R.SECURITY_ALIAS SECURITY_ALIAS_R,'||
' R.LAST_HELD_DATE LAST_HELD_DATE_R,'||
' R.PREV_HELD_DATE PREV_HELD_DATE_R,'||
' Q.PRIMARY_ASSET_ID PRIMARY_ASSET_ID_Q,'||
' Q.SECURITY_ALIAS SECURITY_ALIAS_Q,'||
' COUNT(*) OVER(PARTITION BY Q.PRIMARY_ASSET_ID) CNT'||
' FROM [email protected] R,'||
' [email protected] Q'||
' WHERE SYS_OP_MAP_NONNULL(R.last_held_date) <> '||q'!'FF'!'||
' and ceil(R.last_held_date-to_date('||''''||P_EFF_DATE||''''||')) >= 0'||
' and ceil(R.last_held_date-to_date('||''''||P_EFF_DATE||''''||')) <= 60'||
' and R.PRIMARY_ASSET_ID=Q.PRIMARY_ASSET_ID'||
' )'||
' SELECT PRIMARY_ASSET_ID_R,'||
' SECURITY_ALIAS_R,'||
' LAST_HELD_DATE_R,'||
' PREV_HELD_DATE_R,'||
' PRIMARY_ASSET_ID_Q,'||
' SECURITY_ALIAS_Q'||
' FROM T'||
' WHERE CNT =1';
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
ELSE
v_target_table := ' SPOKE_TO_HUB_SEC_MTCH_TBL';
v_sql_to_run := 'WITH T AS ('||
' SELECT R.PRIMARY_ASSET_ID PRIMARY_ASSET_ID_R,'||
' R.SECURITY_ALIAS SECURITY_ALIAS_R,'||
' R.LAST_HELD_DATE LAST_HELD_DATE_R,'||
' R.PREV_HELD_DATE PREV_HELD_DATE_R,'||
' Q.PRIMARY_ASSET_ID PRIMARY_ASSET_ID_Q,'||
' Q.SECURITY_ALIAS SECURITY_ALIAS_Q,'||
' COUNT(*) OVER(PARTITION BY Q.PRIMARY_ASSET_ID) CNT'||
' FROM [email protected] R,'||
' [email protected] Q'||
' where R.PRIMARY_ASSET_ID='||''''||P_PRIMARY_ID||''''||
' and R.PRIMARY_ASSET_ID=Q.PRIMARY_ASSET_ID'||
' )'||
' SELECT PRIMARY_ASSET_ID_R,'||
' SECURITY_ALIAS_R,'||
' LAST_HELD_DATE_R,'||
' PREV_HELD_DATE_R,'||
' PRIMARY_ASSET_ID_Q,'||
' SECURITY_ALIAS_Q'||
' FROM T'||
' WHERE CNT =1';
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
END IF;
LC_SQL := 'TRUNCATE TABLE HIST_DATA_COMPARE_TBL';
EXECUTE IMMEDIATE LC_SQL;
END IDENTIFY_SECURITIES;
PROCEDURE RETREIVE_RECORDS_FROM_SPOKE
AS
v_target_table VARCHAR2(500);
v_sql_to_run VARCHAR2(5000);
v_commit_after NUMBER;
BEGIN
LC_SQL :='';
LC_SQL:= 'TRUNCATE TABLE X_SECMASTER_HISTORY_TBL';
EXECUTE IMMEDIATE LC_SQL;
LC_SQL:= 'TRUNCATE TABLE X_SEC_MASTER_DTL_HIST_TBL';
EXECUTE IMMEDIATE LC_SQL;
LC_SQL:= 'TRUNCATE TABLE X_SECMASTER_DTL_EXT_HST_TBL';
EXECUTE IMMEDIATE LC_SQL;
LC_SQL:= 'TRUNCATE TABLE X_EQUITY_HIST_TBL';
EXECUTE IMMEDIATE LC_SQL;
LC_SQL:= 'TRUNCATE TABLE X_EQUITY_DETAIL_HIST_TBL';
EXECUTE IMMEDIATE LC_SQL;
LC_SQL:= 'TRUNCATE TABLE X_FIXED_INCOME_HIST_TBL';
EXECUTE IMMEDIATE LC_SQL;
LC_SQL:= 'TRUNCATE TABLE X_FIXED_INCOME_DTL_EXT_TBL';
EXECUTE IMMEDIATE LC_SQL;
LC_SQL:= 'TRUNCATE TABLE X_DERIVATIVES_HIST_TBL';
EXECUTE IMMEDIATE LC_SQL;
/*SECMASTER_HISTORY*/
v_target_table := 'X_SECMASTER_HISTORY_TBL';
v_sql_to_run := ' SELECT /*+DRIVING_SITE(K)*/ K.* FROM [email protected] K '||
' INNER JOIN SPOKE_TO_HUB_SEC_MTCH_TBL I'||
' ON K.SECURITY_ALIAS = I.SPOKE_SEC'||
' AND K.SRC_INTFC_INST = 140 '||
' and K.EFFECTIVE_DATE =(SELECT /*+DRIVING_SITE(H)*/ MAX (H.EFFECTIVE_DATE) FROM [email protected] H WHERE'||
' H.SECURITY_ALIAS = K.SECURITY_ALIAS AND H.SRC_INTFC_INST = K.SRC_INTFC_INST)' ;
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
/*SECURITY_MASTER_DETAIL_HIST*/
v_target_table := 'X_SEC_MASTER_DTL_HIST_TBL';
v_sql_to_run:= ' SELECT /*+DRIVING_SITE(K)*/ K.* FROM [email protected] K '||
' INNER JOIN SPOKE_TO_HUB_SEC_MTCH_TBL I'||
' ON K.SECURITY_ALIAS = I.SPOKE_SEC'||
' AND K.SRC_INTFC_INST = 140 '||
' and K.EFFECTIVE_DATE =(SELECT /*+DRIVING_SITE(H)*/ MAX (H.EFFECTIVE_DATE) FROM [email protected] H WHERE'||
' H.SECURITY_ALIAS = K.SECURITY_ALIAS AND H.SRC_INTFC_INST = K.SRC_INTFC_INST)' ;
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
/*SECMASTER_DETAIL_EXT_HIST*/
v_target_table := 'X_SECMASTER_DTL_EXT_HST_TBL';
v_sql_to_run:= ' SELECT /*+DRIVING_SITE(K)*/ K.* FROM [email protected] K '||
' INNER JOIN SPOKE_TO_HUB_SEC_MTCH_TBL I'||
' ON K.SECURITY_ALIAS = I.SPOKE_SEC'||
' AND K.SRC_INTFC_INST = 140 '||
' and K.EFFECTIVE_DATE =(SELECT /*+DRIVING_SITE(H)*/ MAX (H.EFFECTIVE_DATE) FROM [email protected] H WHERE'||
' H.SECURITY_ALIAS = K.SECURITY_ALIAS AND H.SRC_INTFC_INST = K.SRC_INTFC_INST)' ;
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
/*EQUITY_HIST*/
v_target_table := 'X_EQUITY_HIST_TBL';
v_sql_to_run:= ' SELECT /*+DRIVING_SITE(K)*/ K.* FROM [email protected] K '||
' INNER JOIN SPOKE_TO_HUB_SEC_MTCH_TBL I'||
' ON K.SECURITY_ALIAS = I.SPOKE_SEC'||
' AND K.SRC_INTFC_INST = 140 '||
' and K.EFFECTIVE_DATE =(SELECT /*+DRIVING_SITE(H)*/ MAX (H.EFFECTIVE_DATE) FROM [email protected] H WHERE'||
' H.SECURITY_ALIAS = K.SECURITY_ALIAS AND H.SRC_INTFC_INST = K.SRC_INTFC_INST)' ;
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
/*EQUITY_DETAIL_HIST*/
v_target_table := 'X_EQUITY_DETAIL_HIST_TBL';
v_sql_to_run:= ' SELECT /*+DRIVING_SITE(K)*/ K.* FROM [email protected] K '||
' INNER JOIN SPOKE_TO_HUB_SEC_MTCH_TBL I'||
' ON K.SECURITY_ALIAS = I.SPOKE_SEC'||
' AND K.SRC_INTFC_INST = 140 '||
' and K.EFFECTIVE_DATE =(SELECT /*+DRIVING_SITE(H)*/ MAX (H.EFFECTIVE_DATE) FROM [email protected] H WHERE'||
' H.SECURITY_ALIAS = K.SECURITY_ALIAS AND H.SRC_INTFC_INST = K.SRC_INTFC_INST)' ;
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
/*FIXED_INCOME_HIST*/
v_target_table := 'X_FIXED_INCOME_HIST_TBL';
v_sql_to_run:= ' SELECT /*+DRIVING_SITE(K)*/ K.* FROM [email protected] K '||
' INNER JOIN SPOKE_TO_HUB_SEC_MTCH_TBL I'||
' ON K.SECURITY_ALIAS = I.SPOKE_SEC'||
' AND K.SRC_INTFC_INST = 140 '||
' and K.EFFECTIVE_DATE =(SELECT /*+DRIVING_SITE(H)*/ MAX (H.EFFECTIVE_DATE) FROM [email protected] H WHERE'||
' H.SECURITY_ALIAS = K.SECURITY_ALIAS AND H.SRC_INTFC_INST = K.SRC_INTFC_INST)' ;
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
/*FIXED_INCOME_DETAIL_EXT_HIST*/
v_target_table := 'X_FIXED_INCOME_DTL_EXT_TBL';
v_sql_to_run:= ' SELECT /*+DRIVING_SITE(K)*/ K.* FROM [email protected] K '||
' INNER JOIN SPOKE_TO_HUB_SEC_MTCH_TBL I'||
' ON K.SECURITY_ALIAS = I.SPOKE_SEC'||
' AND K.SRC_INTFC_INST = 140 '||
' and K.EFFECTIVE_DATE =(SELECT /*+DRIVING_SITE(H)*/ MAX (H.EFFECTIVE_DATE) FROM [email protected] H WHERE'||
' H.SECURITY_ALIAS = K.SECURITY_ALIAS AND H.SRC_INTFC_INST = K.SRC_INTFC_INST)' ;
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
/*DERIVATIVES_HIST*/
v_target_table := 'X_DERIVATIVES_HIST_TBL';
v_sql_to_run:= ' SELECT /*+DRIVING_SITE(K)*/ K.* FROM [email protected] K '||
' INNER JOIN SPOKE_TO_HUB_SEC_MTCH_TBL I'||
' ON K.SECURITY_ALIAS = I.SPOKE_SEC'||
' AND K.SRC_INTFC_INST = 140 '||
' and K.EFFECTIVE_DATE =(SELECT /*+DRIVING_SITE(H)*/ MAX (H.EFFECTIVE_DATE) FROM [email protected] H WHERE'||
' H.SECURITY_ALIAS = K.SECURITY_ALIAS AND H.SRC_INTFC_INST = K.SRC_INTFC_INST)' ;
v_commit_after := 0;
INSERT_DATA_TO_TABLE(v_target_table,v_sql_to_run,v_commit_after);
END RETREIVE_RECORDS_FROM_SPOKE;
PROCEDURE COMPARE_RECORDS(p_err_msg OUT VARCHAR2)
AS
l_count NUMBER;
l_err_msg VARCHAR2(100);
TYPE T_SECURITIES is TABLE of HIST_DATA_COMPARE_TBL%rowtype;
ttype T_SECURITIES;
CURSOR C1
IS
SELECT TABLE_NAME, TEMP_TABLE, COLUMN_NAME from SEC_COMPARE_CONFIG
where column_name='EFFECTIVE_DATE';
CURSOR C2
IS
SELECT * FROM SEC_COMPARE_CONFIG where id <=82;
C_REC SEC_COMPARE_CONFIG%rowtype;
BEGIN
LC_SQL :='';
p_err_msg :='';
FOR C_REC in C1
loop
LC_SQL:= ' SELECT /*+DRIVING_SITE(B)*/ /*+PARALLEL(A,100)*/ B.SECURITY_ALIAS, to_char(C.SPOKE_PAID), A.SECURITY_ALIAS,to_char(C.HUB_PAID),'||''''||C_REC.TABLE_NAME||''''||','||q'!'EFFECTIVE_DATE'!'||','||
' NVL((cast(B.'||C_REC.COLUMN_NAME||' as VARCHAR2(100))),'||q'!'No Records Found'!'||'),'||
' NVL((cast(A.'||C_REC.COLUMN_NAME||' as VARCHAR2(100))),'||q'!'No Records Found'!'||')'||
' FROM '||C_REC.TEMP_TABLE||' A, SECURITYDBO.'||C_REC.TABLE_NAME ||'@PROD1.WORLD B,'||
' SPOKE_TO_HUB_SEC_MTCH_TBL C'||
' WHERE A.SRC_INTFC_INST=140'||
' AND B.SRC_INTFC_INST=140'||
' AND A.SECURITY_ALIAS=C.spoke_sec'||
' and b.security_alias=C.HUB_SEC'||
' AND a.effective_date <> (select max(h.effective_date) from SECURITYDBO.'||C_REC.TABLE_NAME||'@PROD1.WORLD H'||
' where h.security_alias=c.hub_sec and h.src_intfc_inst=140 )';
EXECUTE IMMEDIATE LC_SQL BULK COLLECT into ttype;
FORALL x in ttype.First..ttype.Last
insert into HIST_DATA_COMPARE_TBL values ttype(x);
commit;
end loop;
For C_REC in C2
loop
LC_SQL:= ' SELECT /*+DRIVING_SITE(B)*/ /*+PARALLEL(A,100)*/ B.SECURITY_ALIAS, to_char(C.SPOKE_PAID), A.SECURITY_ALIAS,to_char(C.HUB_PAID),'||''''||C_REC.TABLE_NAME||''''||','||''''||C_REC.COLUMN_NAME||''''||','||
' NVL((cast(B.'||C_REC.COLUMN_NAME||' as VARCHAR2(100))),'||q'!'No Records Found'!'||'),'||
' NVL((cast(A.'||C_REC.COLUMN_NAME||' as VARCHAR2(100))),'||q'!'No Records Found'!'||')'||
' FROM '||C_REC.TEMP_TABLE||' A, SECURITYDBO.'||C_REC.TABLE_NAME ||'@PROD1.WORLD B,'||
' SPOKE_TO_HUB_SEC_MTCH_TBL C'||
' WHERE A.SRC_INTFC_INST=140'||
' AND B.SRC_INTFC_INST=140'||
' AND A.SECURITY_ALIAS=C.spoke_sec'||
' and b.security_alias=C.HUB_SEC'||
' and b.effective_date=a.effective_date'||
' AND NVL((cast(A.'||C_REC.column_name||' as VARCHAR2(100))),'||q'!'No Records Found'!'||') <>'||
' NVL((cast(B.'||C_REC.column_name||' as VARCHAR2(100))),'||q'!'No Records Found'!'||')';
EXECUTE IMMEDIATE LC_SQL BULK COLLECT into ttype;
FORALL x in ttype.First..ttype.Last
insert into HIST_DATA_COMPARE_TBL values ttype(x);
commit;
end loop;
BEGIN
select count(*) into l_count from HIST_DATA_COMPARE_TBL;
if(l_count=0) then
l_err_msg :='No records found';
end if;
END;
END COMPARE_RECORDS;
NAME: INSERT_DATA_TO_TABLE
DESCRIPTION: This procedure will insert the records into the target table based based on the data fetched using the sql to run variable.
It also records the commit_after variable which defines that after how many records the insert needs to be committed.
PROCEDURE INSERT_DATA_TO_TABLE ( v_target_table VARCHAR2,
v_sql_to_run VARCHAR2,
v_commit_after NUMBER) IS
v_limit_sql1 VARCHAR2(300) := ' ';
v_limit_sql2 VARCHAR2(900) := ' ';
v_plsql_to_run VARCHAR2(32767);
BEGIN
IF NVL(v_commit_after,0) <> 0 THEN
v_limit_sql1:= ' LIMIT ' || TO_CHAR(v_commit_after) ;
v_limit_sql2:= ' IF MOD(v_number_of_rows, ' || TO_CHAR(v_commit_after) || ' ) = 0 THEN ' ||
' COMMIT; ' ||
' END IF; ' ;
END IF;
v_plsql_to_run:= ' ' ||
'DECLARE ' ||
' v_number_of_rows number:=0; ' ||
' ' ||
' TYPE MyType IS REF CURSOR; ' ||
' CV MyType; ' ||
' TYPE RecTyp IS TABLE OF ' || v_target_table || '%ROWTYPE; ' ||
' rec RecTyp; ' ||
' ' ||
'BEGIN ' ||
' ' ||
'OPEN CV FOR ' ||
' ' || REPLACE( v_sql_to_run, ';', ' ' ) || ' ; ' ||
' LOOP ' ||
' FETCH CV BULK COLLECT INTO rec ' || v_limit_sql1 || '; ' ||
' FORALL i IN 1..rec.COUNT ' ||
' INSERT /*+ APPEND */ INTO ' || v_target_table || ' VALUES rec(i); ' ||
' v_number_of_rows := v_number_of_rows + SQL%ROWCOUNT; ' ||
' ' || v_limit_sql2 || ' ' ||
' EXIT WHEN CV%NOTFOUND; ' ||
' ' ||
' END LOOP; ' ||
' COMMIT; ' ||
' CLOSE CV; ' ||
'END; ';
EXECUTE IMMEDIATE v_plsql_to_run;
COMMIT;
END INSERT_DATA_TO_TABLE;
END SECURITY_COMPARE; -
Functinality to compare two material price with reference to BOM in CO
Hi All,
Is there is any functionality in Controlling which can compare the costing for two FERT materials.
or
is there is any functionality where we can compare two material price with reference to BOM in controlling
Please help me to compare the material price with reference to BOM
Regards
nanduHi,
You can use this report to compare two itemizations. The report compares the characteristics item number, item category, cost element, resource, material, cost center, plant/work center, cost center/activity type, operation number, BOM item, assembly indicator, and cost component.
You can access this report as follows:
Accounting ® Controlling ® Product Cost Controlling ® Product Cost Planning ® Material Costing ® Cost Estimate with Quantity Structure or Cost Estimate Without Quantity Structure ® Compare
or
Accounting ® Controlling ® Product Cost Controlling ® Product Cost Planning ® Information System ® Object Comparisons ® For Material ® Itemization Comparison.
For Detail Please reffer following link:
http://help.sap.com/saphelp_46c/helpdata/en/56/abd108f1a611d28a950000e8214595/content.htm
Thanks and Regards
Binoj M D -
Search Results web part - Custom Query using "Value with a parameter from URL" inconsistent
I have encountered what I think may be a bug, but I am hoping that there is something that I am missing.
Within my search site, I have created a new search results page where I want to customize the "Search Results" web part query. I can add in any number of property and keyword filters (using the "Build Your Query" dialog) without
issue... until I add a filter that uses the QueryString property (the builder dialog calls this "Value with a parameter from URL").
If I use {QueryString.MyParameterX} for filtering, it works beautifully in the query builder dialog. I see the expected results in the search results preview pane, but as soon as I apply the changes things become inconsistent.
If I close/reopen my browser and navigate to my page at http://myaddress/search/Pages/testresults.aspx?MyParameterX=test I see results. If I then refresh the page, I get a "Nothing here matches your search" message. I can then go to
the same address but change one character to an uppercase character and get results. Refreshing that same page again returns "Nothing here matches your search". I can only get search results one time per uniquely cased URL without having
to close/reopen my browser. This behavior was seen on both Firefox and IE.
Finally, I found that if I instead navigate to http://myaddress/search/testresults?MyParameterX=test, it always returns results. This, unfortunately isn't the best solution for me... but it is a solution.
Any insight that anyone can provide is greatly appreciated! I would really like to be able to depend on this working in all logical cases (especially since the search center of other sites is set using the path all the way down to /Pages).
Thanks!Hi, have you been able to solve this issue? I'm getting the same issue and I cant solve it (required CU is installed).
Fabio -
I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve thisHi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
Hello Friends, Is there some kind of collection or Array concept in ABAP, Like in JAVA ( Java.util.Collection)?? In loop I want to take values 1 by 1 and store it in some kind of collection ?? Many thanks Marek
-
Hi, When we try to send mail, the body content is included as an attachment as 'Notification1.html' (which is a default one) Instead we need to have the mail content in the main body. What changes do we need to achieve this? Regards, Saranath
-
T430s Issues with Power Manager
Just to note, I don't have the big issue with the DCC and FCC not matching up that seems to be plaguing many of the T430s users. I do have a Panasonic battery, FYI. So I got my T430s late August and for the past few weeks, I've been noticing that I
-
REPLY TO MY PROBLEM DID NOT WORK -
I just submitted Questions/Problems and the Answers were useless. I had already said that I checked my cables and USB Cords. And of course I had already tried to print out a REPORT. I gave a long explanation of the situation within the past 2 hours a
-
How to use ttBulkCp utility without locking the DB?
Hi, With the version of TimesTen i have installed on my DB, ttBulkCp utlity locks the DB while copying the data from an ASCII file to TimesTen tables. Could any one please tell me an alternative so that DB is not locked while copying the data?